Nut socket abit loose as i know c3 uses 35". Good video.
@mistermikeanson
2 жыл бұрын
I went "ouch" when Alan slipped off the hub nut when tightening it (and yes, I have done the same thing many times!). You probably did not have the room but I would always try to pull up against the weight of the car when doing those up rather than trying to push as Alan was doing
@ToTheGarage
2 жыл бұрын
To be fair Mike, we probably did have the space to pull. A good tip and one I will use so that I dont hurt myself (as often😁) Thanks for watching and taking the time to comment Mike👍
@paulhanger7242
Жыл бұрын
I recently purchased the halfords advanced torque wrench. In my opinion its a superb tool and well worth the money
@ToTheGarage
8 ай бұрын
Love the Halfords Advanced kit. No nonsense good quality tools that you know are not just trading on a cult brand name
@himselfify
2 жыл бұрын
A very informative and good video. I'm doing my brakes according this
@ToTheGarage
2 жыл бұрын
Glad it helped
@paulhanger7242
Жыл бұрын
Excellent guys thank you. Extremely helpful and interesting
@ToTheGarage
8 ай бұрын
You are welcome. thanks for watching
@gerardbooth40
2 жыл бұрын
Neat design, having the bearing built into the disc, although I expect it pushes the price up somewhat. Had to replace a rear wheel bearing on my E class a couple of weeks ago after failing to get the M-B ‘Stealer’ to replace it as it’s just a bit out of warranty (despite the fact that I reported the developing whine whilst it was covered and they did nowt. What a pig of a job, especially as the bearing had welded itself the the carrier on the shaft. Ended up cutting the rotten thing off. Really glad that I was able to borrow a two post lift and full workshop as well as having experienced help from my daughter’s boyfriend. Still, job done and silence restored now. Next to replace the Nox sensor which has an intermittent fault. On back order with M-B and will cost £360 plus Vat! Ouch.
@ToTheGarage
2 жыл бұрын
They are more expensive. (circa £90 a pair when I would expect 50 a pair for similar sized standard ones. But on the up side you know the well bearings were changed every so often. I would have happily paid double if I could have magically made the elgrands wheel bearings come off with the disc😁. Nice to hear that its not just the Jag that has a few daft priced parts.
@gerardbooth40
2 жыл бұрын
@@ToTheGarage £110 for a spurious M-B wheel bearing. £90 for two bearings with discs thrown in for free sounds like pretty good value to me! Incidentally, had some aluminium 30mm spacers made up for the XK8 as I’ve never been a fan of the fuselage inset look of the rear wheels on the earlier x100s. Nicely manufactured, perfect fit on the hub, looks great and I think they even improve the handling. £145 for 4. Bargain!
@ToTheGarage
2 жыл бұрын
@@gerardbooth40 Have you got a before and after shot Gerard?
@gerardbooth40
2 жыл бұрын
@@ToTheGarage how strange you should ask John. Check your email…
@ToTheGarage
2 жыл бұрын
This is not a complicated job, but make sure you have a 36mm socket on hand before you start👍
@NAUTOG
2 жыл бұрын
Great video 👍
@ToTheGarage
2 жыл бұрын
Thank you
@russellgriffiths7780
Жыл бұрын
Wanted to see how you winded piston back.
@ToTheGarage
8 ай бұрын
Hope this helped
@itaizrihan5701
Жыл бұрын
My head gasket is leaking, would you happen to have a video of how to replace the head gasket? ty loved the video great job!
@kevweaver1
2 жыл бұрын
is the torque setting 300 Newton metres
@ToTheGarage
8 ай бұрын
270Nm
@lorraineraby2055
2 жыл бұрын
I was told you cannot change the disks without replacing the hubs. Is what I am looking at on your video the hub which the mechanic would have referred to?
@ToTheGarage
2 жыл бұрын
Hi Lorraine. You can't change the rear disc without changing the bearings as they are integrated into the disk. But the Hub is the short shiny shaft you slide the disc and bearing onto. That does not HAVE to be changed to change the discs. It CAN be. It would be quicker and much more expensive to do it that way though.
@kevweaver1
2 жыл бұрын
hi good video is the nut a 36mm at 300nm
@ToTheGarage
2 жыл бұрын
hi Kev yes. so a good six sided socket is recomended👍
@ToTheGarage
8 ай бұрын
36mm 270NM
@saxsophone
Жыл бұрын
The tool for pushing the caliber back. Is it special ?
@ToTheGarage
Жыл бұрын
It has a left handed thread. So pretty special
@ToTheGarage
8 ай бұрын
Universal tool but not everyone has one
@musoseven8218
Жыл бұрын
Thanks for sharing 👍😊💜✌️ Can I ask please, where did you purchase the new nut, lock ring and dust cap, is that main dealer only?🤔 My dad's needs doing, I told him that it's false economy to replace just the pads, the C3 Picasso rear discs always seem to score badly, not sure why, they seem worse than other brands that we've owned. A set of discs and pads are a must especially as the handbrake needs to grip well too. I was considering EBC black stuff and their basic discs so as to come up from the sketchy OEM quality.
@michaelcollins8778
9 ай бұрын
The new nut and dust cover come with the new rear diks
@fredfeuerstein3001
3 ай бұрын
10:23 Does it need grease between the rod and the wheel bearing?
@GeoffJackson-km2rm
7 ай бұрын
Be warned you may need an impact wrench to get the hub nut off. Using a 36mm socket and breaker bar, no movement at all. Halfords wanted £800 to do all four wheels!
@ianwilson4262
2 жыл бұрын
hi good video. can you tell me what the torque settings are cheers
@UdoIBress
2 жыл бұрын
👌
@ToTheGarage
2 жыл бұрын
Thanks Udo
@kevinweaver521
2 жыл бұрын
Is the torque setting 300 Newton metres
@ToTheGarage
8 ай бұрын
Close. 270 Nm
@user-ur6wk2ze6y
Жыл бұрын
Is it me or did anyone notice the off side shock absorber leaking?
@ToTheGarage
8 ай бұрын
Im hoping its just you 🤔. but now will have to check. Thanks👍
@davebinks
2 жыл бұрын
Why doesn't the disk rotate whilst you undo the bolts? How do you stop it just spinning, because the handbrake cannot be on?
@ToTheGarage
2 жыл бұрын
Hi Dave. if you mean the wheel nuts, i loosened them while car was touvhing the floor. if you mean the hub nut, it tightens onto the stationary stub axle rather than the disc
@antoine_b4l523
Жыл бұрын
I do this manipulation and everything its great , but the esp and abs is disconnect !why ? How i can reset it ?
@FUK-ULEZ
8 ай бұрын
Did you buy the wrong discs? Some come with or without abs
@michaelwakelin4514
7 ай бұрын
Hi guys what is the torque set to please
@airdriefan101
10 ай бұрын
Hi, do you know if this is the same set up as is on a 2018 citroen c3?
@ToTheGarage
10 ай бұрын
I believe so
@markwallwork2478
2 жыл бұрын
Can I ask for the rear pads is there no need for any vopper slip grease on the back on the break pads....like the front ones? Thanks mark
@markwallwork2478
2 жыл бұрын
Copper
@Therealslimstig
8 ай бұрын
I always do it. Stops them rattling
@Therealslimstig
8 ай бұрын
Trying to do this on my friends car and the torx bolts were a terrible choice. They've turned to chocolate.
@ToTheGarage
8 ай бұрын
Its always the fittings that make these jobs difficult
@aaronmachon9127
10 ай бұрын
Jaaaag
@saxsophone
Жыл бұрын
Sorry piston that is.
@ronnymau1857
Жыл бұрын
halfords want me to charge 1400 for similar repair
@ToTheGarage
Жыл бұрын
Well thats about 12 hours work at £100 per hour even if we assume they are charging you £200 for the parts! It took me about 4 Hours and im an amateur. Thats an insane fee!
@FUK-ULEZ
8 ай бұрын
Wow, tell em to F off
@ToTheGarage
8 ай бұрын
I would suggest that means that they don't really want to do it but are prepared to 'Give it a go' on your car
Пікірлер: 59