Danm whitey is a beast that's my dream setup for my truck twin turbo 5.2 🔥🔥
@RacingRamFam
3 жыл бұрын
Do it man! Make it a reality
@kennethsonier1766
2 жыл бұрын
I got a 97 Dodge ram 5.9 Magnum that I just changed the crank position sensor and then it through the code that it needed the cam position sensor so while looking up that I came across your channel, you guys got an awesome truck keep up the good work 👍☮️🇺🇲
@RacingRamFam
2 жыл бұрын
Thank you!
@jadoncreamer7033
3 жыл бұрын
How I found this channel?! I found this channel cause I looked up turbo Dodge Ram and you popped up so I clicked and I’ve been a fan/support ever since
@RacingRamFam
3 жыл бұрын
That’s awesome do you remember what was the first video?
@jadoncreamer7033
3 жыл бұрын
@@RacingRamFam 800hp or bust. Installing twin turbos
@RacingRamFam
3 жыл бұрын
Oh the first one 👀 good to know! Did you get the stickers yet?
@markpollard500
3 жыл бұрын
I'm putting together a 74 dodge dart. Has the 5.2 magnum fuel injection + 5 speed manual swap. Motor came out of a 98 dodge dakota. Was searching for hp gains. That's when I seen your videos. Been a fan since! Honestly I'm thinking about saving up for the procharger though.
@RacingRamFam
3 жыл бұрын
Ya procharger or torque storm! Thanks man glad your enjoying the channel
@markpollard500
3 жыл бұрын
@@RacingRamFam o man I didn't even know about the torquestorm. Almost half the price. Good looking out on that one!
@RacingRamFam
3 жыл бұрын
@@markpollard500 yes only problem is with the torque storm is it doesn’t come with a intercooler setup. But I mean $300 of intercooler and piping will fix that
@AutoDetour
3 жыл бұрын
I found your channel back when tall guy walked in on your blown up turbo srt10 on the dyno, and then I just randomly drove next to you on the freeway right after you put the wheel spacers on Betzy. Seems like so long ago now.
@RacingRamFam
3 жыл бұрын
Yes throw back!
@jonsmith3697
3 жыл бұрын
It was a suggested video, I threw on a single turbo and searched to set if any others have tried it on the 5.2 , and nothing showed up, it was a couple years ago tho, but love the setup, I have a 1998 ram 1500 Laramie but extended cab with the half doors, had 320,000 miles. Ive since pulled her out and cam swapped, lifters, springs, push rods, yada yada, all new gaskets, I just need to get the hp tuners suite so I can tune it all in, I have a 3 bar to install but useless without calibration. I have the wideband and high flow injectors. And yes I'm tired of the infamous plenum pan. I want the m1 intake. Hard to find ALOT of intakes with mpfi. That and another turbo is on the list.
@RacingRamFam
3 жыл бұрын
Hell ya man!
@jonsmith3697
3 жыл бұрын
@@RacingRamFam there's a pic of my whitie lol
@DBGrimson
3 жыл бұрын
So I'm at the dyno shop with my 99 dodge durango 5.2L twin gt35 turbo build and my tuner watched this with me. He says its good you changed out your crank and cam sensor but its unnecessary. He heard your truck and said to check your 2bar map. If it hits 8 to 9lb of boost then wants to choke its because your map is not registering correctly. Had the same issue in mine just now. Friendly heads up.
@RacingRamFam
3 жыл бұрын
Thanks man!
@jadoncreamer7033
3 жыл бұрын
I watch your channel sweet Durango buddy!
@DBGrimson
3 жыл бұрын
@@jadoncreamer7033 thank you buddy.
@alexmyers9262
3 жыл бұрын
It's actually easier to do the crank sensor if you take the passenger side tire and fender plastic off. Much easier than doing it from over the top.
@RacingRamFam
3 жыл бұрын
Isn’t the metal inner fender in the way?
@toogreedy2020
2 жыл бұрын
Bro! Amazing explanation! I appreciate you!💞
@malromero5008
3 жыл бұрын
Found you on fb in a second gen page
@RacingRamFam
3 жыл бұрын
Good Facebook group!
@harrisondanner2650
3 жыл бұрын
I’d love to see the build in person! I have a second gen Ram 1500 of my own and I’d wanna bring it down and have the two second gens chillin with each ither
@RacingRamFam
3 жыл бұрын
That would be awesome
@johnkleer8338
3 жыл бұрын
I just bought a 99 dodge with 5.2 magnum v8 only 34000 miles for 1500 dollars it sat 17 years if any body
@shanethetrain13
3 жыл бұрын
I found this channel because I wanted to do performance engine work to my 2001 ram 1500! I live how in depth your videos are, how it seems like the “Everyman” can do this kind of work, and how cool you guys are! Huge fan!!
@RacingRamFam
3 жыл бұрын
Thanks man! And yes anyone can do this stuff you just have to try!
@actionfamily4488
2 жыл бұрын
Hi this alan I got 1998 dodge ram plow truck for my driveway but can't get it started again thought if working with more power would get work done easier
@RacingRamFam
2 жыл бұрын
Hm like won’t crank,
@actionfamily4488
2 жыл бұрын
@RacingRamFam crank but no start and no spark so trying distributor cap but screws rusted
@ODOTGreen
2 жыл бұрын
This is one job that might actually be EASIER on a van! Doghouse access baby!
@zeekh8035
3 жыл бұрын
Found on a Facebook group DR2go
@RacingRamFam
3 жыл бұрын
Good Facebook group!
@RacingRamFam
3 жыл бұрын
Thanks man
@mattgetz8428
3 жыл бұрын
Found you on Instagram. Then searched you on you tube.
@RacingRamFam
3 жыл бұрын
Sweet!
@buckshotprepper8417
2 жыл бұрын
My 5.9 started up I went to the store 2blocks away got back in the truck and went to start it and it kinda backfired under its breath tried to start it again and it just would krank no fire thought maybe I jumped time did before in a different 5.9 same way but at least that one didn't leave me stranded now I kno where the dam sensor is should b easy peasy Japanesey lol thanks guys
@910MudRats
3 жыл бұрын
yall skipped the part on how tf to remove the sensor
@RacingRamFam
3 жыл бұрын
What did you watch it
@BigBadJones
3 жыл бұрын
Found this channel looking for 5.9 Magnum upgrades. First video I seen was how much to cam a 5.2 Magnum, I watched it and decided I needed to boost my truck soon. It's all y'alls fault. I'll be broke for a lot longer now.
@RacingRamFam
3 жыл бұрын
Lol your welcome 😂
@Sickksidex3
3 жыл бұрын
Nice job brother. I started with the srt-10 pulls video.
@RacingRamFam
3 жыл бұрын
Thanks man! Glad to have you apart of the RAMFAM 😎
@galenyoung8349
2 жыл бұрын
Actually actual Actually Actually Actually actual Actually actuality actual Actually
@SmudgyContent
2 жыл бұрын
Hey bud got a link to a decent air intake box? Or silencer box? What ever it’s called. Lolz Hate the stock one. Had done a tune up after a good 5+yrs of sitting. Pulled the air box off changed filter and now even with a new gasket it sounds like it’s pulling air. Tried some fish tank rubber tube for my home made kinda gasket. Just not working. Plastics old need something new. Ppl on the jungle website complain about all those intakes…
@RacingRamFam
2 жыл бұрын
I got a trick flow on my 99 plow truck and it’s been great the last 5 years.
@ryanshuey6012
3 жыл бұрын
Found you from the Cam and crank sensor video. I have a 92 ramcharger with a fuel delivery issue. I was thinking it might be the ASR but it starts on starter fluid.
@CapJack-eg7od
Жыл бұрын
Great video, where did you get the distributor pickup sensor?
@RacingRamFam
Жыл бұрын
Napa
@CapJack-eg7od
Жыл бұрын
@@RacingRamFam thanks
@johngabriele6532
2 жыл бұрын
I hope not 🤦🏽 hate to tare apart everything I just put back together 2 days ago
@RacingRamFam
2 жыл бұрын
Advance stock cam is pretty pointless lol your engine now can prob only make power to 3500 rpm lol 😂 stock cam suckkkkkkssss
@johngabriele6532
2 жыл бұрын
I don’t know much on the performance side … but I advanced it cause the paperwork said 4degree advanced will give more low end torque … so I was like well I’ll be hauling with it and it’s 4wheel drive so added lower torque would be nice … 🤦🏽 not knowledgeable on mopar just chevy and fords ….
@DarkSevariant
11 ай бұрын
I Found the Channel, Looking How to do a Crankshaft Position Sensor Remove/Replace. Minnesota is Too Cold...!!! That Rubber Grommet That You Guys 'Weeed' After Pulling, I Heard it Can Fall Into the Hole Where the Sensor Goes. Be Wary, Everyone!
@RacingRamFam
11 ай бұрын
Ya the torque converter will eat it alive lol
@johnnygallardo76
2 жыл бұрын
Don't you mean a Distributor Ignition Pickup Coil Assembly??
@RacingRamFam
2 жыл бұрын
Yes they use it as a camshaft position sensor in this engine but yes!
@PaulHudson2-25
6 ай бұрын
Easy as pie!! 😂 More like harder than jaw breaker pie if the damn engine is IN the truck!!! 🔥🔥
@carlemigh5572
2 жыл бұрын
I found this video cause I asked google if the crank sensor had only two wires and they sent me here.While I have you.You seem to know a lot about dodge engines i have a 1998 dodge ram 1500 5.2 and have a crank no start the od light is flashing and ads,fuel and ac relay is clicking.I can bypass fuel relay and prime it and the pump started and the truck will run for as long as the gas I primed it with will allow.I can't get a code reading cause it reads link error.Is there any way you can point me in the right direction.I also bypassed the ads a d no start
@jadoncreamer7033
3 жыл бұрын
Dude I’ve taken the crank position sensor out of my truck at least ten times I’d say I have it down pretty good! Doing wires on these trucks are fun!
@RacingRamFam
3 жыл бұрын
Oh yes! Not to bad tho
@jadoncreamer7033
3 жыл бұрын
@@RacingRamFam enough to threaten to sell it once or twice 😂 I always bluff
@leakyjeep5.9
3 жыл бұрын
Keeping them from arcing is another challenge as well.
@roberthammons8750
2 жыл бұрын
I'm trying to get a ram 5.9 gas engine to start have fire and gas pressure is good but still not starting got any ideas I already replaced cap button, crank shaft sensor, coil and coil pickup in the distributor
@RacingRamFam
2 жыл бұрын
I mean I’d hook up a scan tool and check codes and data. But like mine I burnt out the pcm
@ANGELDELGADO-v6j
9 ай бұрын
I need to do that to my truck also
@raphaelhernandez4088
Жыл бұрын
Anything second gen rams I'm in!
@JaguarOscarEcho
Жыл бұрын
I found this looking for A how to video on replacing the cam Sensor . I have a question who sells them?
@RacingRamFam
Жыл бұрын
Napa, a bunch of places
@danielcockrell9607
2 жыл бұрын
Where can I get a cam shaft positioning sensor for a 2001 magnum 5.9 4sd auto ?
@RacingRamFam
2 жыл бұрын
Anywhere lol
@jacksonprice7442
3 жыл бұрын
I have a 2001 Ram 1500 with the 5.9 that inherited from my dad. I have a lot of plans for it and one of them includes Turbos. I’ve been following the build ever since you put the turbos on white. I’ve learned a lot already.
@RacingRamFam
3 жыл бұрын
That’s awesome man! Def turbo it
@theprodigalson2904
3 жыл бұрын
I see your lifted ram in the background I like it, I just saw your video in my suggestions so I watched it
@RacingRamFam
3 жыл бұрын
Yes man! My plow truck and that’s awesome glad your apart of the RAMFAM
@raymondpauze8801
3 жыл бұрын
Try changing the crank censor in a second gen Dakota/Durango they're fun too!
@RacingRamFam
3 жыл бұрын
I believe that!
@donyellsweat8798
3 жыл бұрын
How did you get your spectre air hat to stay down ?
@RacingRamFam
3 жыл бұрын
1/4-20 threaded rod bent in the shape of a S
@richardbates2367
5 ай бұрын
How do you get the crankshaft position sensor plug apart?!
@RacingRamFam
5 ай бұрын
Squeeze the tab down, if there really stuck a spray if wd-40 works awesome
@DarrensTruckzs
3 жыл бұрын
Ya I had nooo problem at all changing either jus recently .. it was sooo easy !!!! That’s because I had my son change mine for me hahahaha lol .. gotta live it when ur son becomes a heavy duty diesel mechanic lol.. but ya they are in some tight spots for sure man .. great video good job truck is great 👍
@RacingRamFam
3 жыл бұрын
Thanks man! And I wish I had that 😂 lol it sounds nice
@DarrensTruckzs
3 жыл бұрын
@@RacingRamFam yes it comes in real handy having my son able to help me an him being a diesel mechanic is an added bonus .. especially now that I’m having such serious health trouble an wheel chair bound now .. but we come in keepin on an havein fun with our trucks !!!👍
@RacingRamFam
3 жыл бұрын
That’s awesome man! Any mods you got coming up?
@DarrensTruckzs
3 жыл бұрын
@@RacingRamFam yup getting some speciality tunes specifically for my truck from Hughes engines for my 5.9 magnum since I put new street strip cam an lifters an valve springs an true double roll timing chain An gears along with new headers an new true dual exhaust.. actually still getting that finished jus have my two dyno max race mufflers left to install an tail pipes an cold air intake .. also going to pull off my 20 inch stock rims An tires an install 17 in nittos street strip tires an next month hopefully getting my transmission shift kit installed .. then we see how she works .. it’s got the 392 gears in rear suregrip so .. it’s not huge stuff but for me at soon 51 yrs of age in my health it’s a wake up for it an fun enough for me 👍
@RacingRamFam
3 жыл бұрын
That’s awesome man! Have you driven the truck yet?
@billyclardy486
2 жыл бұрын
I have a 97 ram 1500 I upgraded to a 5.9 from a 5.2 I have no spark
@RacingRamFam
2 жыл бұрын
Okay you run codes?
@JaguarOscarEcho
Жыл бұрын
Is there a link that you can share with us on where you buy your parts? I'm trying to find the cam sensor and I'm having a hard time finding it on Napa or an autozone or anywhere. Thanks, thanks.
@RacingRamFam
Жыл бұрын
Boom Amazon for the win! amzn.to/3QE9GBs
@JaguarOscarEcho
Жыл бұрын
Thanks for the help I'm trying to keep a 97 1500 sport on the road.
@chariqueandrews1846
3 жыл бұрын
Please help!!!! I have a 2000 dodge ram 2500 5.9L gas. I changed the crank sensor. Slightly snugged the bolts tight. Now i have a slight ticking or arcing noice. I loosened the bolts and the noice went away for a short time now the noise is back. The bolts on the original one were loose. But probably should of not bought it from Advance Auto
@Eric--zs6um
3 жыл бұрын
As always, brilliant vid. Lol! Not as cold here in PA. Keep vids rolling.
@RacingRamFam
3 жыл бұрын
Thanks man! It’s getting warmer here now
@drews_red_ram8731
3 жыл бұрын
I found your you tube channel when I was searching for "how to cam swap a 5.2 magnum " and saw your build and I just had to subscribe cool videos.
@RacingRamFam
3 жыл бұрын
Thanks man! Did you end up doing a cam swap?
@drews_red_ram8731
3 жыл бұрын
Not yet am saving up to buy a new engine with a little bit less mileage
@RacingRamFam
3 жыл бұрын
Ahhh I got 203,000 miles and it looks mint in there
@frankmoyer9337
2 жыл бұрын
I had a shop replace the crankshaft position sensor and it started and my truck ran fine for a week and then it died on me one day and I was able to restart it but then the next day it died and didn't restart it would crank but no start. My ex fire chief said it could be the ceramic ignition block that's on the fire wall and I told the shop that and they said my truck doesn't have that I was wondering if that's true or where it is exactly on the fire wall?
@RacingRamFam
2 жыл бұрын
You don’t have a ignition box. You have a pcm that has a coil driver in it which controls the coil pack. But the pcm also controls all emission controls and transmission.
@RacingRamFam
2 жыл бұрын
Could be a lot of things for it to just shut off
@MrAcer4
Жыл бұрын
wow! so easy with the engine out.... try that with the engine installed
@RacingRamFam
Жыл бұрын
I did it in like 5 min with the engine in your must have not watched the full video….
@johngabriele6532
2 жыл бұрын
I found your channel by trying to figure out my p1391 code … and I have a question…. My buddy give me this 97 ram1500 5.9v8 and I put a double Chain on it cause she’s 247k but it has the option of a 4 degree advance or retard option on the crank gear … I advanced it , is that giving me this code ????
@RacingRamFam
2 жыл бұрын
Yes… you have to resync the distributor
@RacingRamFam
2 жыл бұрын
Just need a scan tool my snap on modius does it and sync it back to 0 degrees. You can leave the cam advance but engine prob going to run crappy without a tune….
@johngabriele6532
2 жыл бұрын
She doesn’t run crappy at the moment put plugs and wires on it … she is smoothish but stumbles/cut-out … the code is a intermittent signal loss from either crank or cam sensor
@818denverBroncos
2 жыл бұрын
Did it bogg and Stall sometimes because of these two things
@RacingRamFam
2 жыл бұрын
No just was my tuning lol 😂
@bradleybritt9198
Жыл бұрын
Just found you guys. I found it by trying to figure out why my 97 is barely running after doing the intake rebuild with the aluminum plate from Huges performance. The turbos are awesome. You can come do mine in Kentucky. It's 75° today.
@frankmoyer9337
3 жыл бұрын
I found it on Google and I have a 98 dodge ram 1500 that starts but eventually dies and won't start until the next day
@RacingRamFam
3 жыл бұрын
Ya that can be coolant temp sensor issue as well or pcm issue.
@frankmoyer9337
3 жыл бұрын
@@RacingRamFam I forgot to mention that it sputters before it dies
@brucedeville3810
2 жыл бұрын
Found you by youtube search ""2001 Ram 5.9 L 4X4 cam sensor replacement". Thanks for a great video.
@paolomartini150
2 жыл бұрын
Thank you for the video. Is good but the camera constantly moves so fast and waving the parts in front of it doesn't help.
@daved2143
Жыл бұрын
Dig the twin turbos👍 Those who have 97 and up, Dakota with the AC the best way is to go underneath the passenger fender well to get to that crank sensor but unplug it from the top first.
@garymaya1767
3 жыл бұрын
5.2 - 5.9 magnum
@9191.5
3 күн бұрын
Thanks for your video brother it was actually really easy once i started taking everything apart took like 15 minutes 👍✌️💯
@raymondsanchez2916
15 күн бұрын
I found this channel by googling location of both sensor because I'm having trouble with my 1999 Dodge Ram1500 Sport 4x4 5.9 engine won't start when it gets hot and cools down before starting again .
@johnmachado6256
2 жыл бұрын
I'm trying to complete tune up and I can't get the screws out they won't turn. Any ideas how to get them out
@RacingRamFam
2 жыл бұрын
Ya I had to actually remove my entire distributor out of my truck when that happened and brake the cap then vise grip out the screws
@johnmachado6256
2 жыл бұрын
Yeah I was thinking about that too and trying to avoid that. Thanks
@coronapack
3 жыл бұрын
found cause i looked up turbo dodge 318
@RacingRamFam
3 жыл бұрын
Awesome man! Glad your here
@jamesjulian4558
2 жыл бұрын
thank you!
@victorsteen1095
2 ай бұрын
I found your channel trying to figure out what is making the fuel pump is getting hot and quit pumping fuel. You let it set and cool down the fuel works and starts back up. Is it possible sensor bad and getting hot. We did change fuel pump and relay… it’s a 1999 dodge ram 1500… 5.2 liter
@gizmojrreyna1155
3 жыл бұрын
Found the truck on Instagram and I had to see if it was real 😂 I’m just trying to see if I can put a pro or supercharger on my 5.9 love the videos
@RacingRamFam
3 жыл бұрын
Yes do it! Procharger looks great
@Eric--zs6um
3 жыл бұрын
Love 5.9 magnum
@RacingRamFam
3 жыл бұрын
Awesome engines
@mindcontrol4688
2 жыл бұрын
I was looking for how to change camshaft on dodge truck Thanks you help a lot and you explained some of my symptoms to let me know that’s my problem
@JB-ro3hk
2 жыл бұрын
New Subscriber Like The Info!!! I Got 2 MO-Whities...2001 Ram 1500 5.9 and 2005 Ram 1500 5.7 hemi... Found you guy when looking or off side-bar viewing "Scotty K & 1A-Auto" You and your team seem more on my level of doing it yourself with proper tools, schooling, 8yrs military 3rd-shop & motor pool repair. EGR will not got away after rebuild on Tranny on 2001 5.9L, and 2005 5.7L misfires when FIRST STARTS no matter what I have replaced!!! Any Ideas or Knowledge of what in the world is going on with either one or both??? OH....Tell JT although its summer now, it gets COLD AS F%@K here too!!! 2-3GEN HERE...
@RacingRamFam
2 жыл бұрын
Egr won’t go away? And hemis are very known for valve seat issues in that generation do you know what cylinder is misfiring?
@danielbrewer8472
Жыл бұрын
Hey guys what's the secret to an install of a crankshaft positioning sensor on a stick 5.9 Dodge Ram with a fu**ing 6mm recessed hex head bolts???? The EGR ain't coming out this year. ????? Thanks for you insite
@rparcz
10 ай бұрын
When you try to buy a camshaft position sensor at O’Reillys or AutoZone for your 2000 Dodge Ram it’s not on their computer system. You need to ask for a Pickup distributor assembly.
@timwhite4471
2 жыл бұрын
I love your truck . The twin turbo. I have a 96 1500 v8magnum 5.2 and I've been trying to get mine to start. No start cranks fine. Changed cap and rotor. Next I'm gnna do what yall changed is the crank and cam sensor. . Hope it works. As it there stock 96 parts. But I sure would like to have some stickers and a shirt. How much are they. IL represent for yall up here in upstate ny.also I found this channel for help on replacing my crank cam sensor. I also want to add more performance parts to my 96 1500 v8magnum 5.2 extended cab 2x4.
@RacingRamFam
2 жыл бұрын
$20 you can email KeepItboosted@racingramfam.com Also seen a lot of broken timing chains
@tompeet2803
Жыл бұрын
that crank sensor is a ****** ******* bitch and a half just to get to. 2000 Ram sport 1500 5.9. I replaced it and it wouldn't start. Put the old one back in.
@trentonborham700
Ай бұрын
Found bc looking into stuff for my truck lolz same motor love the turbos and the pipes way u ran them looks great
@stayve.
2 жыл бұрын
Just changed the CKP sensor on my 95 jeep ZJ with a non MOPAR one and now it’ll start but idles like shit and hesitates like crazy. Was running fine before till the engine shut off while driving. After that it would crank but not fire till the new CKP. Gonna change it for a MOPAR one now cause changing the TPS, IAC, and MAP sensors didn’t help. Sucks cause it’s so hard to get to on these jeeps it was an all day job lol
@davidordonez852
2 жыл бұрын
Did changing the cps help?
@bryancarey8166
3 жыл бұрын
So after just picking up a 95 1500 with the 360 I just started looking and found your page and have just keep waiting keep it up wish I could do half the stuff you all have but California does not like gas truck or people to go fast in the trucks LOL
@RacingRamFam
3 жыл бұрын
Ya Cali doesn’t seem to be the place to be
@angelosuna131
3 жыл бұрын
So I’m trying to fix my 01 1500 ram 5.9 magnum and I type in what best cam is their for a 5.9 magnum and your video pop up so I started to see you guys and subscribe to you guys just to see more about rams since not really a lot of people don’t work on them thanks to you guys I’ll have more info.
@RacingRamFam
3 жыл бұрын
Awesome angel thank you!
@MikeWhetzel-s3n
9 ай бұрын
I can’t find cam sensors
@RacingRamFam
9 ай бұрын
In the description of the video amzn.to/3QE9GBs
@thekruelflamingosmusic5584
2 жыл бұрын
I found your channel by looking up how to do a part on KZitem
@johnfitbyfaithnet
3 жыл бұрын
Helpful thanks
@kennethrini2932
2 жыл бұрын
I searched for 1996 Dodge ram 1500 crank sensor replacing Thanks for showing the job done on the engine out of the truck Ken in Florida
@RacingRamFam
2 жыл бұрын
Ya man!
@christianschool2082
2 жыл бұрын
where can I buy the camshaft position sensor thats under the distributor? I cannot find it anywhere online and am seeing a totally different sensor
@CarlHorvath-n9j
9 ай бұрын
Crank sensor is much easier to get from under passenger side. Cam sensor is no good and easy way but to lay on the engine haha
@tomagibest5392
2 жыл бұрын
Found the channel bc i needed info on why my own 98 ram wouldnt stay running lmao! Sick ass setup guys, i hopeto get there some day. Keep rockin 🤘
@RacingRamFam
2 жыл бұрын
Thanks man!
@tomassoyweyvon4902
3 жыл бұрын
Its amazing what two Minnesota Polar Bears can do to a Dodge Pick up truck, Great Vid Great Info
@RacingRamFam
3 жыл бұрын
Polar bears lol 😂
@Justa_3valve
Жыл бұрын
To anyone doing this it’s much easier to get it from underneath I do have a stick truck so autos may have to get it from the top
@Tigerns7
2 жыл бұрын
Do you have a link for where you got those both those parts
@RyanMr6.7
2 жыл бұрын
I found this channel because I’m trying to help my good friend change out these problematic sensors on his 5.2L v8 Durango too. I really enjoyed watching this video. Nice work on the turbos!
@RacingRamFam
2 жыл бұрын
Thanks man!
@reubendekastle3021
7 ай бұрын
You guys are good!! I love that you had a pulled engine to demonstrate on. Most helpful of any video out there.
@RacingRamFam
7 ай бұрын
Ya I have a collection of 5.9 and 5.2 magnums lol
@kennykoffin319
3 жыл бұрын
No spark 5.2
@RacingRamFam
3 жыл бұрын
Oh yes
@lumanshadowboyhisdogfriend3488
2 жыл бұрын
OMG this is awesome I hope it works
@Viralvid2024
2 жыл бұрын
I have to do the cam and crank sensor in my 5.9 do you have to "relearn" them after replacing them? Or is it only necessary if they act up after install?
@RacingRamFam
2 жыл бұрын
Nope unless you move the distributor
@Viralvid2024
2 жыл бұрын
Thanks brother
@ZBros817
2 жыл бұрын
How do you relearn them?
@d3ofol
2 ай бұрын
Absolutely love the format. Show it in the open, then in the vehicle. Genius
@RacingRamFam
2 ай бұрын
Thanks
@t-rawwilliams2657
Жыл бұрын
I got the same truck as whitie and got a couple questions about it
@E30Tylerrr
3 жыл бұрын
Where did you find that cam sensor ?
@RacingRamFam
3 жыл бұрын
Cam sensor/ distributor pick up it’s called
@E30Tylerrr
3 жыл бұрын
@@RacingRamFam you sir are a life saver
@caleblivaudais7573
2 жыл бұрын
Thanks for the video. I finally got my 01 dodge ram started 😀
@RacingRamFam
2 жыл бұрын
That’s awesome!
@bill8982
Жыл бұрын
Great video you guys rock
@dtruth5769
3 жыл бұрын
Great vid. My 99 Rt won't start has power to coil none coming out. Change coil and cps. Gonna do cam sensor now. Am I missing something?
@RacingRamFam
3 жыл бұрын
Have you read the codes yet? I just killed my pcm last weekend and it was no spark
@dtruth5769
3 жыл бұрын
@@RacingRamFam Thanks. Just did cam position sensor. That was it. Unfortunately it was the last thing I did. But it's good now.
@RacingRamFam
3 жыл бұрын
Awesome!
@Viralvid2024
2 жыл бұрын
Aftermarket parts work? Or should they be Mopar parts?
@RacingRamFam
2 жыл бұрын
I like Oem but running some Napa ones now are doing great!
@Viralvid2024
2 жыл бұрын
@@RacingRamFam thanks brother
@chriszackery2402
Жыл бұрын
Lol dude you made that look so easy to take that crankshaft sensor out. I did it today because I had already had the intake manifold off and it was much easier to get to it was a total pain in the ass.
@Irrelevantskill
3 жыл бұрын
Isn't this the same thing for the 3.9 v6?
@RacingRamFam
3 жыл бұрын
Oh yes
@ANGELDELGADO-v6j
9 ай бұрын
Also Dodge ram I have
@gonnabeover-comingallodds4532
2 жыл бұрын
Would either one of those cause the motor to run alittle rough if they start to go bad? I've got the 97 dodge.
Пікірлер: 250