STEP (1) 0:12 remove 4 torx bolts (2) 1:25 2 torx bolts 2 clips & remove front VW grille (3) 2:03 Centre - remove 3 torx screws (4) 2:48 remove 2 torx screws, 1 on each headlight. (5) 3:33 remove 4 torx screws above each wheel. Total 8 screws. (6) 4:38 remove 2 clips (fog light covers) lower bumper, left and right. (7) 5:09 Under car, remove 4 push pins and 4 torx screws. 2 x left & 2 x right side. (8) 6:24 remove 2 torx bolts where fog light cover was. 1 x left 1 x right side. (9) 7:10 Slide bumper off. (10) 8:05 Removing 2 torx bolts under each headlight. (11) 8:55 unplugging conector for headlight. Hi all I just typed it up to keep track of what step I'm up to whilst doing the job, save time searching manually for which part I'm up to on the video. Feel free to use this as a guide too :) and Thanks TechClub for the video.
@30gatoscallejeros83
Жыл бұрын
Excellent video, thanks...I'm no mechanic but changed both sets of headlights in 3 hours with this guide. No bolts or screws left over when I'd finished which is a result 😃💪
@entername9017
2 жыл бұрын
Excellent video clear description, great camera work zooming in and out and lighting
@BarryFitzgeraldinvestigates
6 жыл бұрын
Many thanks, you have saved me a great headache. A great step by step, thank you
@richardemmittvo
3 жыл бұрын
Thanks for this video. I bought a light off eBay as well and was thinking to send it back as I thought the fittings were wrong until I saw this!
@andyclark752
2 жыл бұрын
Thanks so much. I bought a replacement headlight for, would you believe it £27, and then courtesy of this excellent video fitted it myself. Never done it before 👍
@spook5311
3 жыл бұрын
thank you so much for such a clear video!! I'll be trying this when my new headlight arrives!
@agardenlovers6648
6 жыл бұрын
Very good video shows exactly what I wanted to know great
@cool2268
6 жыл бұрын
It was for me realy helpful. easy simple clear instruction .
@alexandrezuza3840
5 жыл бұрын
SÃO PAULO, BRAZIL easy simple clear instruction . Thanks a lot !!
@belikewater2413
9 ай бұрын
Mate, just did this on my sons car, superb fella 👍👍👍
@kallanthomas4096
4 жыл бұрын
Great video! Thanks so much for posting this!
@thutosegopolo4405
5 жыл бұрын
Nice tutorial. Thanx my main man!
@bily011
6 жыл бұрын
Very detailed just did my own , easy simple clear instruction . Thanks a lot !!
@techclub8528
6 жыл бұрын
Bilal B one thing I forgot to mention was that I had to set the headlight beam to the same level as the other one this can be done by turning the white plastic hex on top of the headlight
@bily011
6 жыл бұрын
Daniel Kembrey #CARS ooo lucky it seems like they both look the same at the moment! If need be I will thanks
@techclub8528
6 жыл бұрын
Bilal B you can do it after it's installed so it doesn't matter too much i had people flash me to say I had high heels on turned out it was just aimed too high . parked in front of a garage and rotated the hex untill both were the same
@stuartwandrag7030
6 жыл бұрын
Very helpful - thanks.
@gingers1united
5 жыл бұрын
Hi mate, great vid, any idea how you get the motor out. It only turns about 45° but wont pull out. Thanks
@TheBenlebowski
3 жыл бұрын
Thanks your video helped me to get to the ext temp sensor @04:40
@techclub8528
3 жыл бұрын
No problaymo
@mariusm5187
6 жыл бұрын
Great video, really helpful
@0ldtablet
3 жыл бұрын
very clear,good job,pal.
@eduardoazevedo8000
5 жыл бұрын
It’s the second time I do it one my 9n one 3 one I will put the angel eyes one it. Well done video 👍 It’s not easy to put new lamps one this headlights
@mickspencer4171
3 жыл бұрын
Excellent vid, as I'll have to be doing my daughters car shortly.
@fathallagaara8377
4 жыл бұрын
Thank you very mutch from egypt
@tovsotovso8241
2 жыл бұрын
Thanks a lot, this vid was super useful. (Rusty screws made it a bit harder though)
@sailwesterly5444
3 жыл бұрын
Thanks for this. Very useful.
@andreitalpos
Жыл бұрын
thank u mate, u help me with your tutorial. Congrats
@marcusmcauliffe3384
2 жыл бұрын
Ur a legend mate cheers
@yves3560
4 жыл бұрын
THANK YOU !!!! Thought it was much harder ;)
@techclub8528
4 жыл бұрын
Thanks for watching
@rickybolton625
5 жыл бұрын
Good video . Can any body tell me Wat tools I need to do this job
@user-qw1gu9hs8s
7 ай бұрын
thnk you mr. it was great job..
@JingPing009
Жыл бұрын
Thank you for sharing! I’ve just done mine :)
@risenga_junior302
5 жыл бұрын
Thanks ntwana. Great video
@1stSinBin
6 жыл бұрын
Very detailed info thanks. Was about to do one for a mate.
@techclub8528
6 жыл бұрын
thanks
@yves2348
2 жыл бұрын
This is the fastest way to change a burned bulb on the 9N as well. :)
@lidge1994
3 жыл бұрын
I don't know why you don't just use a corless drill after getting the bolts loose, it seems a bit annoying to unscrew these bolts by hand while also holding the ratcheted socket wrench. Also, what's the cable on the bumper used for?
@abdul-baasitparker8441
3 жыл бұрын
How did you remove the 4 pin screws?
@DailyDriv
Жыл бұрын
Hopefully you are still available are all the screws thw same size? And what size are they
@ibo1137
3 жыл бұрын
Thanks for the video mate. I guess it's almost the same on VW LUPO?
@kendogm4026
6 жыл бұрын
Any chance of doing a video on removing the front wing, or some pointers would be helpful
@josephyansiroky4642
3 жыл бұрын
Would you be so kind to share the part # that you ordered for the headlight please?
@dimosthenismandilas6893
4 жыл бұрын
Excellent thanks
@jafrojoshm01
5 жыл бұрын
what size are your alloys?
@leebagleystuntman
2 жыл бұрын
Great cheers mat. Does what it says on the tin.
@pst206cc
5 жыл бұрын
The replacement of the new lamp combination seems to be different from the 9N on my car. The cover style of the near lamp is somewhat different. Is the replacement lamp the original one?
@slesiecki1790
4 жыл бұрын
Are you sure you didn't buy the model for the 'facelift' model, which came out 2005 and ended in 2009. This headlight encases both parts of the lamp without the divide in the middle.
@BensWorkshop
4 жыл бұрын
Many thanks, great video, very helpful as my son has just bought a Mk 4 Polo. I've also subscribed as everyone is trying to get to 1000 subs at least.... You do have to wonder which 46 people didn't like the video though?
@mr.alindavidescu9835
3 жыл бұрын
S
@actiereactie4207
2 жыл бұрын
thx for the video 👌😉
@mrmstevens6224
Жыл бұрын
Excellent video. I was able to do job in under an hour. It would have been quicker If I had checked I had slid the bumper back in place via the plastic slots on the side of the body work first lol
@liudas000
6 жыл бұрын
Hello, I noticed that antifreeze level is below minimum - is it common issue this these Polo's, that they eats antifreeze?
@aymannelgammal1646
3 жыл бұрын
Probably got a leaky seal on the other side of the engine from the water tank the seal often goes n needs replaced its kinda trianglish shaped
@TheFlyingFishy
Жыл бұрын
The cololant level was giving me anxiety, since i just had mine repaired after it was leaking. My Polo is the 2008 model :D
@noqnoqi8552
6 жыл бұрын
What screwdriver are you using? I have a right angle one but it's too big to get to the wheel arch screws without taking the wheels off!
@techclub8528
6 жыл бұрын
A set of Torque Bits,
@techclub8528
6 жыл бұрын
something like this. www.ebay.co.uk/itm/TORQUE-BIT-SET-15PC-SET-1-2-SOCKET/191078149155?epid=1223079338&hash=item2c7d252c23:g:QU4AAOxy0NtTB4uz
@mitchhickey678
6 жыл бұрын
Have you tried turning the wheels to full lock to allow room for the tool in the wheel arch?
@drfeelgood5870
2 жыл бұрын
can the motor be removed separetly
@mitsosmitsos4298
5 жыл бұрын
what size are the torx bolts next to the foglight grille?
@EthanWM2006
5 жыл бұрын
It's T20 or T27, cant remember which one ist next to the foggrill. You do actually need both to change the light, so you need to have both anyway.
@lordadamfirst
5 жыл бұрын
How do you get the damn push pins off. They are the worst
@brunovalente5856
5 жыл бұрын
HEY BRO, do you have used the motor of the old headlight?? Easy job?? I have bougt same as yours..
@techclub8528
5 жыл бұрын
I had to yes. I remember it being a bit of a pain to transfer over. don't forget to adjust your headlight beam height aswell with the white screw thing ontop once you have the new headlight in
@brunovalente5856
5 жыл бұрын
@@techclub8528 so... some diy.. not straigh fit? You just skiped that part :d Sorry for my english :D
@techclub8528
5 жыл бұрын
@@brunovalente5856 I wanted to show in the video how to get the headlight out. the rest can be done by using your brain and thinking about it
@brunovalente5856
5 жыл бұрын
@@techclub8528 WOW thanks for your kindness, i will. I´m from Portugal, so.. nothing to discover now ;)
@ENGAhmedBhje
6 жыл бұрын
have you remove the battery case before? if you have some pictures for wiring under it please send it to me ,
@claireturner4912
2 жыл бұрын
That is a hell of a lot of screws and bolts, just top replace a headlight! - Debating whether or not to attempt this myself as garage want to fit a brand new unit to car probably due for the breakers yard before the next MOT
@thedragon1426
Жыл бұрын
All this to change to a headlight bulb. I love my car, but i hate it for other reasons like this too 😂
@ionx1198
8 ай бұрын
Bought the exact same headlights and low beams simply don't work. If i turn low beams on, both indicators light up and not the low beam bulbs. Why?
@MrHidibo
4 жыл бұрын
Nice 1
@Elaba_
6 жыл бұрын
Thanks for your good video. I would however have hidden the license plate. The coolant level is too low.
@techclub8528
6 жыл бұрын
Carpe diem coolant is done we had a leak.
@Fr34k1ng0ut
6 жыл бұрын
Coolant level in a parked car can be whatever he damn likes, mate :P.
@salamisls3686
3 жыл бұрын
You are great
@techclub8528
3 жыл бұрын
No your great
@Angelo82066
4 жыл бұрын
The lights are removed without having to dismantle half the car. I have done
@DroneTech2012
4 жыл бұрын
For those who has headlight washer here's a link that explains remont-bampera.com/en/vw-polo-2001-2009
@pausepause8203
3 жыл бұрын
@stevenbarrett7648
3 жыл бұрын
Just need to clean everything before putting it back on the car !
@KillerCurryJoeB
5 жыл бұрын
ONE HEYUH, ANOTHER HEYUH
@dancoulson6579
2 жыл бұрын
Far too much work needed to replace a failed lamp. It's something I never like about modern cars. After all that work, I'd suggest changing _all_ of the lamps to Osram Ultralife variety. They're not the brightest, but they are easily the longest lasting bulbs you can get.
@PAWLO-o6y
3 ай бұрын
Mam 2 polówki z 2002 roku w obu wymieniałem reflektory kupiłem nowe okazało się że świecą gorzej nisz te orginalne wymieniałem 2 raz na lampy po tuningu wartość lamp 1/4 ceny pojazdu taki zderzak 20 min max 😂
Пікірлер: 88