Took my clippers apart and dang if I couldn't get them back together seemingly the correct way. Thanks for the vid showing how to do it - and especially appreciate that you're not blabbing all the way through it! Wish more people would post the silent how-to's!
@dublogicgr
9 жыл бұрын
Hi Ian - many thanks for doing this - I had taken apart my Wahl 100 series but then just could not put it back together correctly until I watched your video and its its all working correctly. Thanks
@1975choni
10 жыл бұрын
Thanks for posting I was real stuck !
@acceptgrace3
11 жыл бұрын
Thanks, just what I needed!
@tuppy26
4 жыл бұрын
Thank you so much ex boyfriend managed to get hands on them (they are his lol) but couldnt work out how to put them back together you are a true gent of a life saver
@noragarcia2435
8 жыл бұрын
my taper lever just keeps on moving do i need new blades any help maybe cause i put cooking oil ever since that my machine taper lever i open it close by itself
@ayoubkiamouche275
6 жыл бұрын
بارك الله فيك عمي لويس
@weralasbiru
8 жыл бұрын
Mine is a wahl senior 1668 ...quite not exactly look like this but almost ...can't find anything like mine i have to rely on this vid to put it back together.
@tofutoughtalk
11 жыл бұрын
I was disassembling my clipper and there is a foam piece inside that is all mashed up. Is this piece important to replace? Thanks for the post and help!
@feliciau3368
5 жыл бұрын
What's the difference between the top part and middle part of blade? Should they always be replaced at the same time or can you only replace the middle part.
@ciclovenu99
10 жыл бұрын
Best clippers !!!
@kathrynbartel1429
5 жыл бұрын
Mine are very noisy... is that because they arent lined up correctly?
@venco010
10 жыл бұрын
i got a problem my cutting blade stands a little bit crooked at the holder where it goes in i dont know whats the matter
@ahmxdinhox
Жыл бұрын
What screwdriver did you use to remove the first blade
@samirpatel8554
9 жыл бұрын
Hi, I have the same clippers, able to advise how often I should get new blades? Use the clippers once a month or so.
@ianips
9 жыл бұрын
they should last you years if you keep them well oiled :)
@selketskiss56
7 жыл бұрын
I have brand new wahl pet clippers, used 2 times to trim cat worked great. Took apart to clean lined them up like you did now it will not even cut hair??? Tried adjusting 8 times won't cut the hair ..help.
@ew1068
6 жыл бұрын
selketskiss56 they usually say there are no serviceable parts. They are not made to be taken apart.
@hamadaragab3219
4 жыл бұрын
What is the difference between wahl taper 2000 and wahl super taper please?
@hantzel1
8 жыл бұрын
thank You!!! :)
@bingbot7920
10 жыл бұрын
yo Venco i got the same issue. my clippers are the oster cool vibes my blade dont come off the same as these, its held by 2 prongs. it slants to the right. i think a prong is bent. i tried bending back idk what to do...
@toan80
6 жыл бұрын
G
@ranaair
11 жыл бұрын
Bro i got a major problem, i cant seem to get the teeth straight, when i try to reassemble the clipper and now the teeth are destroying my guards, how can i get it straight?
@stazeII
7 жыл бұрын
Random question: mine had a small piece of grey "foam" beneath the blades around the oscillating arm. Where does that sit when putting it back together?
@ianips
7 жыл бұрын
That's to stop the hair getting into the clipper it slots over and pushes down over the white plastic cutting blade holder.
@stazeII
7 жыл бұрын
I got that part... I guess I'm more curious of how far down into the motor "cavity" does it get pushed? it doesn't seem to sit very uniformly if you just leave it all the way at the top.
@iDrag420
12 жыл бұрын
where can i buy the blades at?
@bingbot7920
10 жыл бұрын
Ignore my comment. Fixed it. just had to line up my outer blade guard to the slant, press them against the glass a lil bit, then tighten it tightly when they were lined up. my inner blade dont unscrew though so most of yal shouldnt have this problem
@Soyarita44
5 жыл бұрын
Thank you
@kianwv7521
7 жыл бұрын
Whats the blue bottle you use to stick the blade???
@Carl-jz6rb
6 жыл бұрын
Kian W/V oil
@hakimsarif5191
10 жыл бұрын
Hey i have the same clipper as yours but when i clean the blades and assemble it back it makes a rubbing noise at the blade . Any idea what might be wrong? Thanks
@ianips
10 жыл бұрын
Hi you may have to turn the adjuster on the side of the clipper down a little until the noise stops or if you have dropped clipper your blades might be damaged in that case you will have to sharpen or buy new
@Mrwolfiesx
8 жыл бұрын
+ian lewis what does sharpern means? i dropped mine n it cause the loud sound help me
@ianips
8 жыл бұрын
Sharpen them on a sharpening stone.
@Mrwolfiesx
8 жыл бұрын
+ian lewis omg i somehow fixed it i dismantle it n assemble it back few times n accidentally dropped it again and it works jus fine. tks btw
@themartianking619
12 жыл бұрын
At Sally's or amazon
@A1ex951
8 жыл бұрын
where can I get that tapering blade?
@ianips
8 жыл бұрын
Www.lewissalonservices.com
@H_dmi
6 жыл бұрын
Merci
@LiamEFC.
5 жыл бұрын
I'm 21 and most of my friends are having kids and i cant even attach the blade to my beard clippers
@warreng675
7 жыл бұрын
Tried it several times still does'nt work
@warreng675
7 жыл бұрын
12 times
@kwakerwingking9336
8 жыл бұрын
why don't u talk would be more help full bro
@ianips
12 жыл бұрын
lewis salon services . com
@millyfaith5027
5 жыл бұрын
the video is in poor quality 4 a person tht doesn't know a lot about clipers not me they wont know how to mount them
@hannamedi3022
5 жыл бұрын
Mae'n dweud yn y Saesneg ar gefn pacyn y llafnau newydd sut i'w mowntio
@andymacedo5821
5 жыл бұрын
Guys professional replacement blades that fit 😳🤔 how come my parts don't look like that ? I must have the ones from Russia ! Nothing fits ! 😳🙄 no surprise ! Everything in this area being sold is illegal ! By the way I don't need motivation ! I don't need anything ! Just a few hundred and y'all are going bye bye bye ! I'll be getting it by the end of the summer ! So keep laughing !
Пікірлер: 49