Here's a tip from an old(er) person :) In the 70s/80s we were tracking mosts instruments as hot as possible, due to the signal/noise ratio. But with the (very important) exception of high freq. instruments. Anolog saturation sounds great, but NOT on hh and cymbals. We would track those with plenty of headroom. If your plugins emulates real analog gear, you should also implement good analog recording practice. Record your low-end content as hot as posible and your high-end with plenty of headroom. Another point: If you are trying to recreate the 60s or early 70s sound you should probably process 4-8 busses/ gruops rather than individual instruments. In those days 4 track tape machines was what most engineers had to work with.
@OptomodMix
3 жыл бұрын
I prefer an analogue buss set up too. I was fortunate to use analogue gear before it went out of fashion, there are definatley things I don't miss about it 😉
@groovecat7
3 жыл бұрын
Excellent advice. Many thanks! : )
@effector3659
3 жыл бұрын
There's no real advantage in tracking hot with digital, in some cases it can be detrimental as those cheap preamps on those cheap interface produce more noise when cranked, not to mention background noise when recording at home.
@NillerVision
3 жыл бұрын
@@effector3659 Sorry if my reply was so unclear that it could lead to that misunderstanding. I am not advocating for tracking anything hot digitally. I’m talking about how much of an analog saturation effect you would add to different types of instruments to emulate 70-80s sound. Back then it was good practice to track low range instruments as hot as possible. So you should not apply the same amount of “effect” to all instruments. Fun fact: back when digital recording became standard with 16bit/ 44.khz devices, like ADAT and DAT recorders, It was not uncommon to see recommendations for tracking quite hot digitally as well, in order to make full use of the limited resolution. But with today's standard you should absolutely leave plenty of “digital” headroom
@effector3659
3 жыл бұрын
@@NillerVision now I get it!
@michaelcaplin8969
4 жыл бұрын
9:18 "And when I die you make my tombstone ner ner dum derr nrnana chewie." This is hip.
@OverdriveStudiosPontevedra
4 жыл бұрын
😂😂😂
@ghost-youth1037
4 жыл бұрын
I'm ded 😂
@citytonightproductions
4 жыл бұрын
Ha ha! You win the internet today!
@davidasher22
4 жыл бұрын
Its mumble folk
@caliskaterdrummer
4 жыл бұрын
Hot damnnn 😆
4 жыл бұрын
Such a comprehensive and useful tutorial. Thanks a lot! Here's a guide to navigate through: 0:00 Explains the fundamentals of analog routing 9:17 The mix before and after the analog emulation processing Processing the raw tracks before mixing: 10:52 Stage 1 - the analog preamp 12:49 Stage 2 - the analog tracking board 14:12 Stage 3 - the tracking tape 15:05 Stage 4 - the analog mixing board Processing the main bus after mixing: 18:35 Stage 5 - analog summing channel 20:00 Stage 6 - the master tape 22:34 Going bankrupt is not necessary, give Airwindows plugins a try (thanks to Tracy Blair for the tip) My greatest conceptual takeaway: the analog-sounding result won't come from just one tweak at some point of the signal chain, but from the combination of many subtle effects along the chain.
@MelloCello7
3 жыл бұрын
God bless you
@WriteJus
3 жыл бұрын
First off, thanks for the navigation. Maybe I’m just dumb, but I’m not understanding the difference between stage 1 and stage 2.
@ChiragGokani
3 жыл бұрын
@@WriteJus you need to train your ears. The difference is very obvious
@ChiragGokani
3 жыл бұрын
Damn, this comment should be pinned
@pumpernickelherbert
3 жыл бұрын
@@WriteJus Came here to talk about this, stage one and two are a bit misleading without more explanation. Many studios, if they have a quality desk, will go straight into the desk, and therefore the sound of the desk IS the sound of the preamp and vice versa (as well as the sound of the EQ and dynamics section, if engaged). However, some studios have cheaper desks, or just a lot of outboard gear, and will run mics to outboard pres, and then route those pres to their desk. The video is misleading in this, because it routes a Neve pre to a Neve board emu. This is unnecessary and does not mimic real life (the equivalent of plugging a mic into a standalone 1073, then routing it into an 8068). TL;DR: If you have a channel strip emulator that has a preamp section, skip step one unless you're looking to route specific tracks to specific pres.
@TheRobGuard
4 жыл бұрын
Saturation makes the mix come alive!
@squeebbb
4 жыл бұрын
I really need to go through your channel and start from your beginner level videos. You are very consistent, concise, and informative in every video. Great content man!
@RocknRollkat
Жыл бұрын
Excellent presentation, FINALLY someone who 'gets' it ! What you didn't mention was the inclusion of a spectrum analyzer to track the buildup of thermal noise and harmonics. That buildup adds a lot of character to the analogue signal. I created a 6SN7GT tube plugin with correct harmonics AND thermal noise. I add one in each preamp input, just like nature intended. To really get the correct emulation, you can drive every piece of outboard gear with such a tube since all the old gear was tube driven or transistor driven. Transistors have a 'colder' sound though, and I haven't bothered to emulate one for that reason. Transformers were used extensively in the vintage gear and their phase shift adds to the overall effect. Every preamp should include input AND output transformers, as should busses, etc. Tape machines back in the day ran with a -70 dB noise floor, and that added to the overall effect. Once again, a spectrum analyzer would bear this out. It would be interesting to see if these commercial plugins live up to their promise, and a spectrum analyzer would gear that out. Thank you for posting this video, you really got it right. Bill P.
@Its24KARAT
6 ай бұрын
Yo brother, do I have to export first to get that analog sound? For example, I use britson bus, and britson channel, I have 3 individual hihats which goes to a group, I throw the britson bus on the group, then, the Briton channel on individual hihats, then export them, and it's only now that I have the real processed sound? Thanks for helping me. Sorry if I didn't make myself clear brother
@RocknRollkat
6 ай бұрын
@@Its24KARAT The Britson bus plugin is supposed to emulate the Neve 8014 console from the early 1970s. There is no "real processed sound", every console sounds a bit different, etc. This discussion could fill volumes. What I'd suggest is that you do a mix with the emulators in, then the same mix without. Try different plugin setups, etc., until you arrive at a sound that you like. You can even run the finished mix through a Pultec emulator with the settings flat, just to add that Pultec sound. That was done decades ago in the analog world, no kidding ! Keep us posted, Bill P.
@Its24KARAT
6 ай бұрын
@@RocknRollkat Thanks man, I will try that and you know here! What are the best emulators you know BTW?
@Its24KARAT
6 ай бұрын
@@RocknRollkat In fact, I just love the way the mix feel, Do you the Rave culture channel? Will all the big BIG ROOM Artist, odd you could talk a look, just listen quickly 2-3 tracks, you will notice their mix feel spacious. Can you see and let me know if they achieve this by analog summing? You seem experienced that's why im asking brother 👍🏻
@RocknRollkat
6 ай бұрын
@@Its24KARAT The best plugins are the ones you like. I'm serious. Let's say that you go to a studio with an all-out API console, and you don't like the way it sounds. There's your answer !
@musingsofrock
4 күн бұрын
Thanks a bunch! That pre-amp trick was really cool. I tried it and basically changed my entire recording and mixing strategy. Now I don't have to fight for volume so much!
@AfromationAfromation
2 ай бұрын
it actually worked , i tried it and my mix got instantly bigger and fuller and louder , incredible work guys thank u
@boostio_music
4 жыл бұрын
8:00 is basically where it starts if you already know what this all means
@blacklanton
4 жыл бұрын
Goat!!
@driftergrey
4 жыл бұрын
Long intro lol
@peterconnolly2724
4 жыл бұрын
Thanks for that -I was about to bail on the video. Far too much basic stuff.
@fsharpau4925
4 жыл бұрын
More inclusive to start with basics - catering for more people with a wide range of levels of understanding. Good that you give times to FF to. An index in a book to turn to...Anyone read a book lately?
4 жыл бұрын
Well, I didn't know that stuff and I found the intro quite useful. But I appreciate having time tags in videos to skip forward aswell.
@richardaling5278
4 жыл бұрын
Harrisson Mixbus 32C v6. The DAW that emulates the complete famous recording desk incl e.q. 3 types of compression and mixbus tape saturation. I use it for a year or so and it's great! Free demo!
@SeanofAllTrades
Жыл бұрын
For anyone rreading this now - there's TONS of FREE plugins from Analog Obsession that emulate lots of old school analog gear. Perfect for doing this without spending a penny.
@Indigoc33
4 жыл бұрын
I was literally just thinking about this and I open youtube and see your video... hallelujah, great content dude keep on
@TheHonestTerrorist
4 жыл бұрын
Just the same thing happened to me bruh
@QuabmasM
4 жыл бұрын
Ive been waiting for somebody to make a video like this for years. Funny thing is, I learned all this stuff just a few months before this video.
@soundescapemn
4 жыл бұрын
This is by far one of your best tutorials. Thank you so much.
@masteringcom
4 жыл бұрын
Happy to help!
@iantanner7579
4 жыл бұрын
i've been messing with analogue desks, outboard and recording since '87, and only been working ITB since 2016... If you really want that analogue feel with your DAW, sonically IMHO, Airwindows is where it's at... start with ~ Channel6, BussColors4, ToTape5, FromTape, ClipOnly, NC-17, Density, Logical4, Pressure4, VariMu and CStrip.
@Rek-Ignition
4 жыл бұрын
Ian Tanner Sounds interesting, could it be possible for a tutorial ? Much appreciated
@michaelcaplin8969
4 жыл бұрын
I would also very much appreciate a tutorial or explanation 🙂
@ALLMOMENTSARETEMPORARY
4 жыл бұрын
hey man. this is great. just one question. do you put this chain on all the individual tracks or just on the master?
@SamFranklinMusic
4 жыл бұрын
also super interested if this chain is for every track... thanks for the tips tho!! Airwindows is incredible
@ANON0061
2 жыл бұрын
This video changed my whole approach to recording! So amazing! A huge thanks to you!
@travenlee
4 жыл бұрын
Mixing through the bus and tape recorder are what I needed thanks for this 🙏
@braedenhenderson2358
4 жыл бұрын
As a MOAM subscriber and big fan, I came here to say that this is one of my favorite videos you guys have ever put up. Your work is only getting better and better and it is so helpful to amateur mixers working to improve their skills and demystify a pretty opaque art form. Cheers!
@masteringcom
4 жыл бұрын
Glad you enjoyed!
@waynebo248
4 жыл бұрын
This was very well laid out and explained. I've been using saturation and analog emulation plugins for a while now. This definitely helps me set them up more effectively. This is my first time watching your channel. It won't be my last. Thanks!
@bowaswell7735
4 жыл бұрын
This is probably the best video about mixing I’ve ever seen!great job!!!
@masteringcom
4 жыл бұрын
Happy to help!
@MirageLinne
4 жыл бұрын
Great video! Also consider including multiple passes through tape, as engineers had to fit tracks onto 8/16/24track recorders. That limited real estate forced engineers to buss tracks together like : 1) All the drums and the bass to 2 track 2) the guitars to 2 tracks and so forth. That means running the sounds through multiple passes of tape and console summing to accommodate the sessions as they progressed. I think mimicking this process will get you even closer to the sounds that remind us of the 60's & 70's. In the 80's, digital machines like the Otari Dtr90, the Mitsubishi x-850 and Sony pcm 3324 allowed engineers to make "perfect" slave reels to run off of during overdub and mixing, creating a much cleaner production style. It was also around that time the first mass produced CD's became available. So moving from destructive comping due to multiple tape/console passes, released on vinyl, to cleaner digital machines, more track real estate and the first primitive CD's, created the now common trope of "harsh digital". But when you go from gooey tape compression, saturation from both console and vinyl playback, sure, everything will sound harsh in comparison. I think it took time for the engineers to adjust to the new technology and for the consumers as well. Amazing now to able to use both technologies as an artistic expression, rather than a limitation! Sorry for the lecture :)
@devoyefolkes6446
4 жыл бұрын
Thank you for the lecture hahaha!
@devoyefolkes6446
4 жыл бұрын
So in essence you'd have different elements in your mix all down to seperate two tracks and then back into the master bus? so itd be like grouping your vocals, sending it to a two track so it gets exported into a stereo track back into your mix and then that stereo track gets sent to your master bus so itd be going through two forms of master tape so to say?
@viewfromfen9181
4 жыл бұрын
Nice knowledge, thank you!
@MirageLinne
4 жыл бұрын
@@devoyefolkes6446 Exactly. Everything time you'd want to open up space for new tracks, you'd have to commit other tracks, mixing them down from, say, 6 tracks to one or two, maybe even with their associated effects, like delays, reverbs, passing them through additional tape simulation.
@crnkmnky
4 жыл бұрын
@Mr X Cool, but how much does fresh tape cost, and how much mixing time is (re-)added by doing multiple tape passes in real time?
@JasonMcFly
2 жыл бұрын
Listening without watching, it sounds like you're adding really nice light compression with each plug-in. Good stuff
@vektacular
3 ай бұрын
I enjoy your practices for sure….Ive been recording since 1998 and I have my own ways of doing things….one thing I’ve learned throughout the years is that on a daw it’s really all about the compression in the end…..if you wanna make a track sound like it’s deeper or further away in the mix then slow down the release….more up front then speed up the release. I use to view the stereo field as more of a left to right type of thing. As the years went on I started seeing it as a front to back and left to right type of thing. Compression is the key for that. Eq is is to keep all your sounds outta the way of each other. Tape emulation is cool but it’s not like real tape saturation to me. You have done a good job at emulating that 70’s or 60’s sound but it’s more to do with the instruments you’ve used. I get that you can add the hiss and hum sounds to the recording but other than that those emulators aren’t adding much of anything…..
@Scrapyy
3 жыл бұрын
Without = Flat With = Dynamic, Bright and all the GOOD things pop out This is the best method I've ever done when mixing... with the way that I produce I can literally throw these on, add basic EQ and compression and just adjust the levels and then its done!
@giuseppebonincontro4452
3 жыл бұрын
This video really changed my view on mixing
@masteringcom
3 жыл бұрын
Glad it helped!
@freudobas3914
4 жыл бұрын
You're an amazing instructor. Though I am a beginner in the mixing world, understand the whole process. You really are on a mission. Best regards!
@KarimLeMec
4 жыл бұрын
A mix really WARM as hell. I will apply those suggestions to my next tracks
@natanyofsho
4 жыл бұрын
I literally just woke up from a nap, and clicked on this video from watching your other videos and I am just in time for the live webinar! got my note pad ready, closed all the tabs and everyone else is asleep! ready for the livestream
@theangelbluerevolver2863
4 жыл бұрын
Excellent. If like myself your on this journey. Watch it twenty times if needs must...A lot of information packed in this small video. Many thanks for your effort in creating and sharing your knowledge.
@bigrivermedia762
4 жыл бұрын
This is what I love about having a UA Apollo interface - I can bake most of the sound I want into my tracks during the tracking stage. I typically go through the Neve 1073 Unison preamp then sometimes API 560 EQ and occasionally the Studer or Oxide tape plugins. Saves a ton of backend time on mixing. I have the UAD Pultec, Vertigo VSM-3 and Ampex ATR-102 on my 2-buss as my default template for every mix as well.
@greenvalemanitou155
3 жыл бұрын
Thanks mate! This was very useful! Especially as I'm using an Apollo Twin X already.
@dpecomposer
3 жыл бұрын
Great video! Thanks! For anyone out there that wants to get tape machine emulations, you can get a tracking tape machine and mastering tape machine both in the Slate Virtual Tape Machine. You can get 2 emulations for the price of 1.
@adebolasegun4018
4 жыл бұрын
You were just too sincere about your information and well informed, trust me you good
@frankiesunswept
8 ай бұрын
This is a really cool and helpful video. I generally follow these rules but a few details really helped my workflow. Inspired me to set up API, Neve tests this way, and a and b-ing tracks recorded through them. Thanks y'all
@arijinal
4 жыл бұрын
I have to take the time and say THANK YOU and keep doing what you're doing!! Your video is GREAT and well needed! The way you went in depth and detail is impressive and you explained it in a clear and concise way! Great job!! I'm subscribed!👍🏾💪🏾💯
@masteringcom
4 жыл бұрын
Glad we could help!
@williessandwhich9725
4 жыл бұрын
Thanks KZitem for recommending this video to me. SUBSCRIBED
@ptchblaq8302
Жыл бұрын
Amazing info brother! I added these techniques to what I’m doing, the results are on another level!!! Thanks!
@DDWyss
4 жыл бұрын
Great video, Dylan! I have quite a few analog emulation type of plugins, but I never knew how best to use them. I can't wait to go back to one of my mixes with this approach in mind and see what I can do!
@RogerioValgode
4 жыл бұрын
Great video! The idea of baking the tracks is great. Thanks a lot. Love your content.
@PatrickStefan
4 жыл бұрын
I love this approach. Works great for me ever since watching 🙏
@EllencyOfficial
2 жыл бұрын
Bro I will pay you when I get a bit of money . You're giving so many free infos , THANK YOU!
@matthewleger5605
4 жыл бұрын
This is an incredible video; so glad I stumbled on to your channel -- best tutorials in the business! Thanks so much.
@riversideproductionztv
4 жыл бұрын
Thanks this video really helped me understand the signal flow for getting that analogue mix
@raibard8886
4 жыл бұрын
Excellent video! One way i’ve gotten immediate saturation is with Acustica Audio’s zero latency plugins on the input fx when tracking.
@deesee2008
2 жыл бұрын
Love this idea, no harm in trying it out either ! Classic albums have been constantly remastered to be louder now too.You should listen to the classic music so yr ears already are used to that sound.
@gatlinproduction
4 жыл бұрын
You know crazy about this video. I literally just performed this same task using my MPC X except for I used the 3 preamp’s and slate digital console. Then made audio Steem into Protools. Omg. The sound quality I literally scare me half to death I’m like oh my god this is crazy audio sound nice warm and steamy.
@lightafluident.9950
2 жыл бұрын
I use hardware to track, and then plugins to mix. When you track through a great mic preamp and a few nice compressors you have the warmth and or the grit you need already just from using hardware. There's nothing that compares with tracking through hardware.
@jeenjone6794
4 жыл бұрын
Am I mistaken or there is the same step two times? He is using the preamp of a console (Neve 1073), and after that, he is also using the preamp of another plugin (Virtual channel). In real life, the preamp is actually part of the tracking board. After gain staging, it goes straight to tape.
@campusaint
4 жыл бұрын
yep
@bennettevergreen4232
4 жыл бұрын
not always for example I was in an analog Studio and we recorded the bass with this chain 1. Neve preamp 2. Compressor 3. EQ 4. Mixing Board (ChannelStrip) 5. Studer (Tape) 6. Mixing Board (ChannelStrip) 7. Computer Its more about picking the right preamp for the instrument but I think its better to just use one Channelstrip
@relaxsix6
4 жыл бұрын
Memories are fresh 1980 That was the best time ever
@dreographicmusic8002
4 жыл бұрын
Thank you for a very informative video! This is the first time i see a video from this channel and i learned a lot! I use ableton but you made it easy to understand your process and i was able to still understand and translate your work in the daw to mine 👌🏽 i’m looking forward to learning more from this channel 🙏🏽
@dreographicmusic8002
4 жыл бұрын
I also want to add in that im able to hear the difference and i watched this video on my PHONE the first time! Says a lot about your quality 👌🏽
@kennethscott3538
3 жыл бұрын
Probably the best video ive watched on KZitem 🤷🏽♂️
@masteringcom
3 жыл бұрын
Ah thanks! Glad it helped. 😅
@murrayalexandre
2 жыл бұрын
Yeah! Great tutorial! Greetings from Brazil!
@stupendousmusic4190
4 жыл бұрын
Interesting. Definitely a noticeable difference. What I don't understand is, why do you need the Slate Virtual Channel, if you're already going through the 1073? You have the pre and the fader which make up the channel in the 1073.
@eddysel10
4 жыл бұрын
Great video. I will try everything presented in this video. If you put a good set of headphone on, you will understand the essence of this video better. You can definitely hear / almost feel the transition from digital to analog sound. Thanks for sharing 👍🏾
@chadbierman8058
4 жыл бұрын
Thank you for sharing! This was some great information.
@ArlidarMusic
18 күн бұрын
Thank you so much for this video!
@blackcreekmusic783
9 ай бұрын
You can also add bus processing to your effects sends that will help things
@yitao_
2 жыл бұрын
All y'all should check out Harrison Mixbus. This daw has built in mixboard on every channel + tape on each bus. Masterbus has a tape too.
@burkesworks4464
2 жыл бұрын
Great video, but was wondering - Isn't the UA 1073 plug-in technically a preamp and tracking board (channel strip) combined? I ask because they do offer the 1073 as a separate preamp only. The extra tracking board in step 2 seems redundant if the 1073 is used in step 1.
@lms421
Жыл бұрын
Imwas looking for some comment like yours to understand that, in my opinion, it does seem redundant.
@williamk6605
Жыл бұрын
@burkes - No, it’s not necessarily redundant because often people use an external colorful preamp/channel strip outside of the plain sounding tracking console/channel strip they have. And the point is, you may very well want all of the saturation/color as possible. Not to mention you may want to use the “clean” eq and/or compressor from the extra board.
@lms421
9 ай бұрын
@@williamk6605 But then, when using an external preamp, do you leave the preamp of the tracking board in zero db, right? You don't usually gain stage twice, do you?
@endlichjura
4 жыл бұрын
Great stuff, man! Oh man, that just made my mix sound 10x better! Question: What would come on my sub busses (drums, bass, guitars, vocals etc.) and my FX returns? Just the mix board simulation I guess?
@LRRecordigStudio
4 жыл бұрын
Great help. It really gives a thick and deep sound thanks !!!
@gochurra5702
3 жыл бұрын
What a great job you guys did! Thank you
@calebingersoll6085
2 жыл бұрын
This is tedious but my GOD, it gave me the exact sound I wanted.
@mthomas1091
4 жыл бұрын
I’d definitely love hearing the changes without the “here it is before” & “here it is after” (interrupting my listening focus). The visual banners/buttons are enough of a cue. Good content otherwise :)
@joeschlicht
4 жыл бұрын
agree with this, but cool video none the less
@ViniAndradeMusic
4 жыл бұрын
lol you have small short memory for music. practice on that.
@ViniAndradeMusic
4 жыл бұрын
you can skip it with your mouse too or keyboard
@queenhenryviii
2 жыл бұрын
What was the point of this comment? This video wasn't made for YOU and only YOU...Make your own video if you want things tailored to your specifics.
@mthomas1091
2 жыл бұрын
@@queenhenryviii My comment wasn't made for you. Run along now...
@bringyourownheart
4 жыл бұрын
Literally the first. Also, love your channel.
@HojoSinclair
4 жыл бұрын
I'm actually figuratively the first. Go figure
@patrickey5552
4 жыл бұрын
If you want to have fun and really see what real analog gear sounds like compared to plug in emulations, go to Access Analog's website and for $5.99 for 30 minutes you can rent a classic or current analog piece of gear run by a robot! Then stream your audio to and from that real gear back into your DAW. Compare that sound with your plug ins. Access Analog makes robots that control real analog racked gear. Pretty cool. I've been testing SSL compressors, or API EQ's, the real things. And the differences are educational at the least, but reveal transparency, definition, and "that sound" we all try and emulate.
@TyroneLoganMusic
4 жыл бұрын
Very nice tutorial. I also like the use of the “warm” color palette used on your tracks. Nice touch.
@frankherrgott
4 жыл бұрын
I love your tutorials ! So inspiring ! Many thanks!
@MarcPlaysDrums
3 жыл бұрын
The saturation thickens the mix and makes it sound vintage.
@mr.chisels729
4 жыл бұрын
Awesome Video bud! I've been around the studios since the early 80's and I was weaned on 2" tape... I love the subtle difference this adds to the overall sound. Will this replace a true Analog tape...no, but for those that can't get their hands on one (for cost or otherwise), this emulates it quite nicely. great job.
@Hadrorex
4 жыл бұрын
Same here. Analog rules. No stinking latency. Left recording for over three decades. Now that I'm retired I have a Soundcraft MFX16i, 8 Presonus Channel Strips, a wide collection of Rode, Shure, Audio Technica, Sennheiser and Audix mics that will be going into a Tascam DM 20 SD recorder. I will be getting the Tascam M24 mighty soon to make building music instrument by instrument, track by track at a time easier. Will also use the M24 as my interface to the box.
@gmreynoldsjr
4 жыл бұрын
Really liked the example song.
@relaxsix6
4 жыл бұрын
Very Informative That's what I was looking for. Thank you
@mrmorpheus9707
4 жыл бұрын
Damn.. you let the secret out! Lol.. there goes the neighborhood!!!! 😀😆😆
@gatlinproduction
4 жыл бұрын
Yeah he did. This is why we can’t make any money these days. It’s way too many secrets out these days. It’s like the jig is up.
@philipdunck5825
4 жыл бұрын
Very very cool video man. Thanks. You are the answer for many of my pains. God bless you
@masteringcom
4 жыл бұрын
Glad we could help!
@JohnnyBeane
4 жыл бұрын
Thank you for the info!! Using Logic Pro X here.
@steensvanholm
9 ай бұрын
Great video. One thing is a bit unclear, though: Where in the process does the actual mixing of the song take place (eq, dynamics, reverb etc.)? The simple answer would be: After step 4 and the bouncing. BUT that raises another consideration: The analog saturation from the mixing board signal flow (all the way from input to output) is already baked in, so if you continue from here, you would either have to mix the baked in tracks with your native Logic gear (eq, dynamics etc.) OR use further analogue plugins, but that would mean MORE analogue signal flow than in a real analogue world, especially if you were to mix it in an SSL channel strip, using its dynamics and eq. It would be SSL mixing board with SSL mixing board added. Therefore, the bouncing should happen after step 3 (The Tape machine). Then step 4 would be a natural adding of an SSL channel strip or similar analogue mixing board. Or to put it short: The virtual Channel from Slate emulates the full signal flow from input to output of an SSL desk, but not the eq and dynamics in between. I know my argument is probably just pointing out a subtle difference. But subtlety is the main theme of this brilliant tutorial. I get the point of saving CPU-power, but I also find it fair to point out the subtle change of order in the suggested signal flow in the video. Or am I missing a point? Love all your work and videos, guys, at mastering.com
@moxictasculinity
8 ай бұрын
After this process to the end, I used to add more analog emulations and my mixes sounded over processed. So I would go with what you recommended.
@Brnemusik-qg6pj
8 ай бұрын
@@moxictasculinity Thx, you confirm my suspicion. :-) Another solution might be to add a very conservative amount of analog hue from each plugin. The more plugins, the less from each. :-)
@truthfinder4973
4 жыл бұрын
good info i came to this 8 years ago what i did was bring analog and daw to gather ,and its in di and Preamps my fav i have and use is ART Tube MP Mic Preamp ,this can work as a di box or a mic preamp it give that nice crisp warm sound .than at the daw part for fx of any kind i set up bus i never ever putt fx on the recorded track it gets muddy.the only thing i do on the recorded track is set the eq there than i send to a bus track.butt over all you get the best sound by not going di in with everything if you can .if not for di in get di box and try to have one that got tube in it.
@Richard_P_James
4 жыл бұрын
And you could also add master bus compressor between the console bus emulation and the master tape plugin (if you're going for the SSL approach).
@MarboBeatz
4 жыл бұрын
This is awesome
@osagie2
4 жыл бұрын
Thanks Rob !! Bless You !
@masteringcom
4 жыл бұрын
Happy to help!
@Glow0110
4 жыл бұрын
LOVE this. Thanks so much!
@SaintHubbins2
4 жыл бұрын
all types of distortion add harmonics. Clipping, or digital distortion, does not take away from the sound, but rather produces only odd harmonics which give it that harsh tone. Other 'smoother' types of distortion, such as tube distortion add 2nd order harmonics.
@ulysses773
4 жыл бұрын
SaintHubbins2 true
@zgreatorex
4 жыл бұрын
reverse that, 3rd order harmonics come from analogue stuff, 3rd order being 3rd 5th 7th ect which is more musical naturally, 2nd order harmonics are naturally dissonant and created usually by digital gear
@fre.shavacado
Жыл бұрын
I tried to download your cheat sheet collection by clicking on the link you provided , but it took me to a marketing video selling a mastering course.
@erichillmusic
4 жыл бұрын
Great content and very helpful! Thanks man!
@learnerforever6933
4 жыл бұрын
Wow 🤩 unique tutorial! Thanks
@Coachlumi
Жыл бұрын
This is awesomely cool
@tubeampsrule1
3 жыл бұрын
Not really a criticism but you say you're looking fir subtlety and it made me think of the stark contrast, Kush Audio plugin demos :D
@fgustafson2243
4 жыл бұрын
Awesome use of analogue emulations. Sometimes the simple and the obvious is the most brilliant. Very clever to make such a precise imitation of a professional analogue studio setup. Great video! Question: Do you know Decapitator from Soundtoys? Wouldn't that be a great tool as the console imitations. You can choose between different emulations of different consoles in the plugin. Perhaps it is a bit to exagerated in the emulations. If you know the plugin, what is your opinion on its use in this context?
@TRUE-LION
Жыл бұрын
My ear wants his vocals on the mic to be clearer and more audible. Other than that it sounds pretty solid.
@mikebozik
6 ай бұрын
Interesting signal chain. I'll have to do some experimenting. 😊 Other than that, the vocals were a bit burried.
@yadaventertainment6744
3 жыл бұрын
Extremely helpful.
@harisnoor7904
4 жыл бұрын
I love your videos man...
@justsupersteve
Жыл бұрын
Wow just imagine if you have 50+ tracks and you have to repeat this process 50 times 😵🤯 I guess I will have to try it
@DavidDorenfeld
4 жыл бұрын
This is what I was missing (other than a great studio and equipment ^^) Thank you sooo much. Every little bit of the describing in the video really helps.
@strategicpeoples2973
4 жыл бұрын
Dope breakdown
@azuraldotv
4 жыл бұрын
Thanks for this gold! And what about doing this on mix groups (synth, drums, vocals...)? Does it works?
@immortalitytherapper23
3 жыл бұрын
Great video and information!
@dgp1080
4 жыл бұрын
Really helpfull! Thank’s!!!👏🏻👏🏻👏🏻👏🏻👏🏻
@hoggboyy
8 ай бұрын
Can you share the name of the track and artist? This song is honestly amazing.
Пікірлер: 569