great video as I just ordered a few items to start printing, and I don't yet have a conveyor. Flash dryer is it for now.
@FlexMckenzie
3 жыл бұрын
Great, a flash dryer will do the job too. May take a little longer. Thank you for watching this video.
@tbncbn7143
Жыл бұрын
yo thank you so much bro that was helpful video...keep going
@FlexMckenzie
Жыл бұрын
Glad it helped
@nomoreslogans
2 жыл бұрын
Yes! Exteremely helpful!
@FlexMckenzie
2 жыл бұрын
Glad to help! Thank you for watching
@kevinwallis2194
4 жыл бұрын
interesting. all the screen printing videos ive watched never time them after they hit 320. ive never done it either, and never had a problem.
@FlexMckenzie
4 жыл бұрын
Before I would wait until it reached 320, then I would remove it from under the flash dryer, but the print don't last long. It would wash out faster. Thank you very much for watching this video.
@denisestewart2957
5 жыл бұрын
Stretching that shirt made you flex your muscles huh lol, good video thank you for sharing
@FlexMckenzie
5 жыл бұрын
That's how I get my workout in lol. Thanks for watching
@christianarcos4333
Жыл бұрын
Best video ever
@FlexMckenzie
Жыл бұрын
Thank you for watching this video
@PFCALEXANDERTHEGREAT
3 жыл бұрын
I have one question, what was the spacing from surface to heater?
@FlexMckenzie
3 жыл бұрын
Its was 6inches away. Thank you for watch this video.
@robertohuerta8499
4 жыл бұрын
So once the ink surface reaches 320° for the final cure I leave it under for how many seconds?
@FlexMckenzie
4 жыл бұрын
Roberto Huerta The way I do it in the video works out great for me. Yes it must hit 320 for the ink to fully cure. Thank you for watching this video.
@supermanpalpak
4 жыл бұрын
How many watts is your flashcure bro? And th4 distance from th3 platten.
@FlexMckenzie
4 жыл бұрын
It's 1600 Watt and I keep it at 6 inches from the platen. Thank you for watching.
@merakifitllc
3 жыл бұрын
Do you have an adjustable temp flash dryer and set it to 320? I have an non adjustable flash dryer and it reaches about 700-800 degrees max do I just wait until it reaches 320 and leave it for a minute?
@FlexMckenzie
3 жыл бұрын
No, I believe it heats up to 500 and I adjusted the flash dryer height. I also, use a temperature gun to make sure I know whenever it reached 320, Thank you for watching this video.
@thatkidfilmz
3 жыл бұрын
Thank you for the stretch test ! I use a heat press at 340 for 15 seconds once . Sound I do multiple passes to get it to stretch well? Mine seem to crack really easily
@FlexMckenzie
3 жыл бұрын
That mean its not cure. Maybe your flash dyer is not close enough. Make sure to use a temperature gun. Thank you for watching this video
@romanng3483
3 жыл бұрын
I noticed in the WB flash dryer vid you pulled white on the garment 2 times as well. Is that something that I should do for light inks on dark fabrics or just your process?
@FlexMckenzie
3 жыл бұрын
No, but white on dark fabrics is a problem, so you need to print flash print to get the white bright looking. Thank you for watching.
@moniquechampagne3810
4 жыл бұрын
how far away is your flash dryer from your shirt when you cure it? 2-3" inches?
@FlexMckenzie
4 жыл бұрын
I keep it about 6 inches from the platen. Thank you for watching.
@DtheDelinquent3000
3 жыл бұрын
I have the same flash dryer and I’ve been using white fn ink on black shirts and so far I’ve had success keeping the flash dryer 3” away from the garment for 25-30secs.
@Driftingfunctionz
3 жыл бұрын
If it’s been a day and I didn’t heat it enough, Is there anyway to still save the garments?
@FlexMckenzie
2 жыл бұрын
Nope, Thank you for watching.
@justincurran5921
4 жыл бұрын
Just wondering, how many seconds did you flash for? Is there a specific temp you flash at? Thanks!
@FlexMckenzie
4 жыл бұрын
If you we’re talking about print flash print, do it for a few seconds until it’s a little tacky and then you print again. Thank you for watching it.
@juliush7528
2 жыл бұрын
Great video
@FlexMckenzie
2 жыл бұрын
Thank you for watching
@saheedabiona6340
Жыл бұрын
How to heat plastisol ink without break
@FlexMckenzie
Жыл бұрын
Try using your heat press set at 320 for about 1 mins. Thank you for watching
@034bleeder
5 жыл бұрын
Smoke says it's done. The ink probably hit 450° in this one.
Пікірлер: 37