Thank you Chris! I typically use an external recorder (H4N Pro) because of the preamp with lav mics. I know this same technique will apply to recording with an external recorder. Thanks for showing the waveforms in Premiere as this helps me understand what is being recorded, what it looks like, and what to do to have separate audio.
@xXGatorGamingXx
2 жыл бұрын
this was ridiculously helpful
@ChrisSpiegl
2 жыл бұрын
Thanks, I appreciate that.
@NARRASSAFilmes
3 жыл бұрын
Thank you. Very useful.
@ChrisSpiegl
3 жыл бұрын
Thank you 👍
@laytonkoa8635
3 жыл бұрын
@Pedro Emmett Instablaster :)
@user-gf3ch7sd6v
5 ай бұрын
Thank you
@ChrisSpiegl
5 ай бұрын
You're welcome
@simonaf-tx1vq
Жыл бұрын
Thank you Chris! I have a question - do you think a Y-Splitter would also work with Røde Wireless Go II? I have 4 people I need to interview at once and need a way to get them all in one camera. Do you habe any tips for that?
@FreeToUseSounds
Жыл бұрын
Hi Chris, I can’t seem to find the correct product you used in the video when using your affiliate link. Its a different splitter. The you show has two females but the link shows male.
@rajendhar.d143
11 ай бұрын
Thank you Chris!
@ChrisSpiegl
10 ай бұрын
You're very welcome 🌸.
@Debtfreehomesteaders
2 жыл бұрын
Excellent video. Thanks for sharing! I have been recording with zoom h4n and Rode Ntg but have wanted to try a vlogging setup with my iphone 12 mini using maybe the rode micro and wireless go on a split track so i have more options in post. Thanks -Will
@ChrisSpiegl
2 жыл бұрын
Great idea to combine mics like this.
@4thGearPinnedmx
Жыл бұрын
Hi Chris, I typically use my shotgun mic Rode video mic Pro for motocross vlogs where I'm either filming bikes or a subject talking in front of the camera, my problem is when I try and interact by talking back to the subject from behind the camera the shotgun mic obviously doesn't pick up my voice, so I was thinking your method if I had a shotgun mic for subjects talking to the camera and a rode wireless mic as well on me for when I talk back to them, would you say this is best option or could you recommend something better please.
@jorgeferreira4191
2 жыл бұрын
Is it possible to record 3? For example deity d4 mini allows other inputs. If you pair rode wirelless go ii with 2 receivers to the deity, how is it going to be recorded on camera?
@ChrisSpiegl
2 жыл бұрын
It’s going to record the deity on one track and both the Røde transmitters on one track. But you could then use the recording which is done on the Røde Wireless Go II Transmitters by downloading them and syncing them in post.
@jorgeferreira4191
2 жыл бұрын
@@ChrisSpiegl Yeah I was wondering it would probably be the only way. Thanks! I was going to buy the deity because of the input jack but probably going to get rode videomic go ii and just get the split mic cable. The videomic has the usb-c connection possibility which is an extra.
@KoW
11 ай бұрын
Can I connect 1 microphone by hot shoe and second by mini-jack? Splitter won't work because microphones are stereo and I want record 4 channels on Sony FX30 is it possible?
@ChrisSpiegl
11 ай бұрын
Not sure about Sony FX30 since I don't use it… but if it has the electronic hot shoe adapter stuff going on you may be able to pick up that XLR adapter thing for the top and possibly it does support 4 channel.
@sixmunso2940
2 жыл бұрын
Can I use Yspiltter for 2 saramonic 500 pro B2 instead buy B8 ( for 4 mic )
@romshes77
3 жыл бұрын
4:19 when I do this i still see sound coming out from both channels. In premier pro i can hear sound in the left channel a little too. Why is this? I am using M6 markii and the same Rode mic and splitter. Thanks!!
@ChrisSpiegl
3 жыл бұрын
That may be because the cable is not shielded or the audio signal is so "loud aka strong" that it bleeds into the other side of the cable.
@ChoicesHabitsAttitudeLuck
10 ай бұрын
So the audio is still Stereo even if you're only using 1 mic?
@EpicureanEric
2 жыл бұрын
I've got another question-- In a previous recording, I shot a video using Rode Wireless Go 2 with two lavs. I never pulled the audio stored from the individuals mics into my computer and have since deleted the RAW audio files. I only have the saved recorded video files from my SD card. When I replay the video as it is, it picks up both mics, however, mic 1 comes from left speaker, and mic 2 comes out of the left speaker. In adobe Premier pro, it is left as Stereo, Number of Audio Clips: 1. Per your video, I then changed the audio setting to Mono, and 2 tracks. When I pull the same video clip onto the timeline I only have V1, and A1 (the two mics are playing under a merged audio on A1). I don't have 2 audio tracks, and one of the mic sounds muffled while the other one sounds fine. Where did I go wrong, or how can I fix it so that I end up getting two audio tracks OR not sounding muffled one of the mics? Thank you.
@ChrisSpiegl
2 жыл бұрын
In this case it is important to make sure you do the audio mapping correctly, selecting mono in the drop down and mapping them. Then moving them into the timeline again so that can update. You should end up with two separate mono tracks that way.
@MoElf
3 жыл бұрын
Hi Thank you very much That what i am looking but on recorder like tascam dr07x You have zoom h5 could you tell me can i do that setup on zoom h5 but with 3.5 jack on top ( not with xlr adepter ) and i will get stereo sound left and right ( i mean if i put 2 mics videomic ntg with like your cable or with rode sc11 cable when i talk on right mic i will hear right side and when talk left side i will hear side ) But on zoom h5 Thank you
@ChrisSpiegl
3 жыл бұрын
Yes with the H5 that would be possible on the top capsule of the zoom H5.
@MoElf
3 жыл бұрын
@@ChrisSpiegl thx
@MoElf
3 жыл бұрын
@@ChrisSpiegl i found it kzitem.info/news/bejne/s6CXr5yuraSYoXo Thank you for your time
@EpicureanEric
2 жыл бұрын
Thank you for this video. I have a question, very much like your current setting in the video, how would this change if we used 2 lav mics on the Rode Wireless Go 2, and 1 boom mic, both going through the Rode SC11 TRS splitter cable? What settings need to be made either on the camera, Rode Wireless GO 2 or in Adobe Premiere pro so that we can capture the 3 sounds sources? Can you explain? Thank you.
@ChrisSpiegl
2 жыл бұрын
This mens you have 3 mics total. I would either use two cameras to record at the same time or I would have the Wireless Go 2 mix to one mono signal and then put that on one channel and the boom mic on the other channel. However, then you loose access to the individual wireless mics. Unless you use the RAW recordings which are done on the transmitters anyways 👍.
@EpicureanEric
2 жыл бұрын
@@ChrisSpiegl Does this mean that the 2 lavs that are connected to the Wireless Go 2, should be in "Split Mode" rather than "Merge Mode"? And b/c it's using the SC11 splitter, both the lav mics will come out of 1 channel. While the boom mic, will come out of the other channel? When you say you loose access to the individual wireless mics, do you mean that you just can't edit the audio for each lav independently and that the audio for both lavs will be under 1 channel when you work in Premier Pro?
@ChrisSpiegl
2 жыл бұрын
Hi @@EpicureanEric , you are describing that you have 3 microphones. However, your camera can only record a left and a right channel. That means that by definition you will not be able to record all 3 microphones into separate tracks. However, since you are using the Wireless Go 2, you also have the local recordings on the transmitters which you can download when connecting the Wireless Go 2 Transmitter via USB-C to a computer. I would setup the Wirelss Go 2 Receiver into Merged mode, then use the SC11 to connect the Wireless Go 2 and the Boom Mic to the camera. The camera audio will then have: Track 1: Boom Mic Track 2: the two lavs mixed together And in premiere pro you can then: separate the two channels into separate tracks. And additonally sync the audio from the Transmitters. That way you will end up with 3 tracks (one for the boom, one for each lav).
@EpicureanEric
2 жыл бұрын
@@ChrisSpiegl Thank you so much!!! Finally someone with the right answers for my question!
So if I were to do this, when exporting my final project will my interview audio be in stereo? And than the boom mic as well?
@Studio13Official
Жыл бұрын
Will this cable work with using the Movo dual wireless mic system and a Saramonic shotgun microphone on my Sony ZV-1?
@hoppyknitz9377
3 жыл бұрын
i bought one of the mic splitters by Hosa and it just doesnt work, any clue what could be going wrong? the individual mics work, is the wire defective?
@ChrisSpiegl
3 жыл бұрын
Sounds like a question best asked to the makers of the cable splitter which you purchased. One thought: are you connecting the mics to a phone or to a camera? If it's a phone, it may have something to do with TRRS vs TRS (3 metal rings vs 4 metal rings on the mini Jack connector).
@NARRASSAFilmes
3 жыл бұрын
Another way to do that is duplicate both sources of audio and put the effect called fill right in one and fill left in another.
@ChrisSpiegl
3 жыл бұрын
Yes, that’s also a possibility. But while editing, I find it super useless to have the same channel show up twice when there is no real benefit to having both waveforms visible since they are identical anyways. Or is there a benefit to fill left/right channels?
@NARRASSAFilmes
3 жыл бұрын
@@ChrisSpiegl I'm gonna try your way. Looks like more practical. Thank you!
@b2ch325
2 жыл бұрын
Do you think that we can you a splitter like this and 2 sets of rode wireless go 2? Then we will have 4 mics
@ChrisSpiegl
2 жыл бұрын
If you are ok with the signals being mono for the two Wireless Go 2 units. You'll have the recordings on the transmitters. But the camera only has 2 channels and thus you'll end up having the left channel with the mics from the first Wireless go 2 unit and the right channel will have the other two microphones.
@shewrites.
6 ай бұрын
Can i do this in Capcut?
@ChrisSpiegl
4 ай бұрын
I tried, but it's hard to separate the audio in cap cut. Not impossible but difficult.
@fullfanryangreathouse4278
2 жыл бұрын
I have a rode vid micro and a wireless mic. But when I plug them both in with the SC11 I get a terrible buzzing sound. Is there a way to fix this?
@ChrisSpiegl
2 жыл бұрын
This is something you can only figure out yourself by trying out all kinds of different setups. For example, it could have an effect if you power the camera via a dummy battery or with a normal battery. The VideoMicro is also prone to these interferences which is a known issue and can't really be fixed. The new Røde VideoMic Go II should not have those issues any more (since it has shielding) but I have not tested that.
@fullfanryangreathouse4278
2 жыл бұрын
@@ChrisSpiegl I think I may have found a solution. I think the sc11 is too short. I believe if I extend the cable distance between the wireless mic and the micro it may fix it. Update coming.
@ChrisSpiegl
2 жыл бұрын
@@fullfanryangreathouse4278 That could be it. But kind of defeating the purpose 🙈.
@fullfanryangreathouse4278
2 жыл бұрын
@@ChrisSpiegl I know right
@ChrisSpiegl
2 жыл бұрын
@@fullfanryangreathouse4278 But as I mentioned: the VideoMicro has this as a known issue that it does not have RF shielding. So the best solution would be to replace this mic with a different one which does have RF shielding.
@lincforest1613
2 жыл бұрын
Hello sir, can i plug that adapter in my laptop ? All I want is plugging two microphone separated left and right channel
@ChrisSpiegl
2 жыл бұрын
If your laptop has a dedicated mic port this may be possible. However, if you have a combined mic/headphone jack (aka a TRRS port) then it is most likely not possible because then the mic is only a mono channel.
@lincforest1613
2 жыл бұрын
@@ChrisSpiegl oh now i got it, even I buy headphone Nd microphone splitter ?
@lincforest1613
2 жыл бұрын
@@ChrisSpiegl only old laptops has a dedicated mic port xD
@ChrisSpiegl
2 жыл бұрын
@@lincforest1613/videos Yes, the TRRS connection only supports Mono microphones. But you could buy a USB Sound card with a stereo mic input. Maybe that's a cheap option.
@carnivalfly7590
3 жыл бұрын
This video so long
@ChrisSpiegl
3 жыл бұрын
Trying to give a good explanation can take a while. Luckily I didn’t make it 23 minutes. ☺️
Пікірлер: 60