To access the hidden settings menu on your Freesky Swift Horse electric bike, follow these steps:
Power on your bike.
Press and hold the + and - buttons simultaneously until the screen changes to settings mode, prompting you for a 4-digit code.
Use the up and down arrows to select the code, and then press the i button to confirm. The code you need to enter is 1313.
Once in settings mode, you can scroll through the various settings (numbered 01 to 18) using the + and - keys.
To change a setting:
Press the i button to select the current value.
Use the + and - keys to adjust the value.
Press the i button again to save the new value.
Here are some of the available settings:
Display brightness (default: 03)
Speed unit (MPH or KPH, default: 01)
Battery voltage (default: 48; do not change)
Screen timeout (00 - 60 seconds, default: 10)
Pedal assist (PAS) range (options: 0-5, 1-5, 0-7, 1-7, 0-9, 1-9; default: 0-5)
Tire diameter (default: 29 due to fat tires)
Speed calibration (default: 06)
Max speed (controller limits throttle speed to 20 regardless of this setting; default: 62)
Number of magnets passed by the PAS sensor before PAS kicks in (default: 02)
Number of magnets on the PAS sensor (default: 12)
Maximum amperage (default: 30; do not change)
Cutoff voltage (default: 40V; do not change)
Reset odometer (put to 01 to reset)
Walk mode (on/off, default: 01)
....
Twitter: twitter.com/Yo...
Twitch: / yoursixstudios
Discord: / discord
Instagram: / yoursixstudios -
((( Subscribe to my LIVE STREAMING )))
((( Gaming Channel "YourSixGaming" )))
/ @yoursixgaming ...
((( Subscribe to my ADVENTURE CHANNEL )))
((( Travel, Cameras & More "YourSixAdventures)))
/ @yoursixadventures
Негізгі бет How to Enter Hidden Settings Menu on Freesky Swift Horse (Change Brightness, Pedal Assist, KM/H)
Пікірлер: 7