This is the only video on the whole internet that explained how to get that thermometer thing back in it's proper location. Thank you so much for posting this video.
@N-Scale
Жыл бұрын
Glad it helped Chrissy, Mike
@sarahborne3637
4 жыл бұрын
Brilliant. In the UK but watched this video and dismantled the ice maker as instructed and found that the ice tray had come out of its circular housing. Popped it back in and as we say here "Bob's your Uncle" Thank you.
@N-Scale
4 жыл бұрын
Glad it worked for you . Mike
@rosemarywilson7474
4 күн бұрын
Thanks again! I’ve watched your video each time I repaired my ice maker because I forget. You are wonderfully clear. Thank you for making this video!
@N-Scale
4 күн бұрын
Thanks for the kind words Rosemary !!
@CARR403
8 жыл бұрын
Mine was stopped at the twisted tray position (kind of a scary thing to see for the first time). Thanks to you I learned how to remove the maker, how to remove the gears (a gear was out of place) and the reset button. Thanks, you saved me a lot of time and money! It took me half an hour.
@N-Scale
8 жыл бұрын
+CARR403 Glad that it helped you! Mike
@taritavirtue
3 жыл бұрын
you are a GENIUS and absolute gentleman for posting this video! i cannot thank you enough. your camera angles were fantastic and easy to follow step-by-step instructions truly saved my butt. in my impatience i thought, woo-hoo i can figure this out now... but like an impatient jerk... i installed the ice maker assembly with the cord up the middle instead of on the side and over the top. thank goodness i rewatched the rest of your video instead of thinking i had it all figured out. some people read assembly instructions while others dive head first and then wonder why so many parts are left over. like i said, you saved me! i immediately ran back into the kitchen, pulled out the assembly and re-routed the cord correctly. thank you so much!! crossing my fingers this fixes my problem. unlike you, my ice tray wasn’t cracked, but if it were, i would have tried to repair it just like you did -> so seeing you admit that and show your work product cracked me up. 2 giant thumbs up 👍, i saved your video in several places and immediately subscribed! you are truly wonderful and i wish you a blessed life.
@N-Scale
3 жыл бұрын
Thank You so much and glad to help. Mike
@richardmcleod4658
6 жыл бұрын
Mike, in a word, thanks. In four words, thank you very much. You saved me a service call, made me feel better about being a home handy man, and make by wife very happy. Not in order of importance, I may add.
@N-Scale
6 жыл бұрын
Glad to have helped Richard. Mike
@sherirae3658
6 жыл бұрын
This was exactly the same for model RS2530BWP. I wish I would have come across this video before I fixed mine. This by FAR is the best video out there! I appreciate this. Thank you and anyone needing to fix there tray needs to use this video. Trust me. I went through dozens. Great job!!!!!!!! :)
@N-Scale
6 жыл бұрын
Thank you so much and hope it helps folks. Mike
@scorpmusic2625
5 жыл бұрын
I hope you are still able to read these comments because I would like to thank you so much for making this video. I replaced my tray today and all is working well. Again, nice job on the video and thank you.
@N-Scale
5 жыл бұрын
I am so happy to have helped. Mike
@michaelm1592
Жыл бұрын
Had a problem getting only broken cubes. This tray replacement solution was the perfect fix. Took a total 20 minutes to take off door and do replacement. Thanks!
@rayhelvy9947
8 жыл бұрын
A follow-up to my last post. The part came on time from appliancepartspros, and it took about 10 minutes to swap out the ice trays and get it back in. (I had already removed the assembly when I ordered the part.) It worked like a charm, and my model, the RS267LBBP makes it easier to make the electrical connection. It took a few seconds to figure out how to hook the assembly back onto the left rear post, which was not visible because the wiring was in the way, maybe twenty seconds or so, but it wasn't that hard. I ran the test and got the tray to flex and refill immediately. Mission accomplished! Good video, Mike!
@N-Scale
8 жыл бұрын
Glad it worked for you Ray, Thanks , Mike
@jaynestrong8715
4 жыл бұрын
Thank you, while mine was not the exact same ice maker you helped me. My rubber sensor holder had "dropped" down I did not know exactly where it went. Samsung was absolutely no help, but your video saved the day!
@N-Scale
4 жыл бұрын
Glad I was able to provide some help
@DSThumper650DR
8 жыл бұрын
I came to this video looking for assistance in repairing my Samsung freezer icemaker. I immediately saw I have a different model, however I stayed to watch the entire video because it is so enjoyable and informative to watch. Very good presentation!
@N-Scale
8 жыл бұрын
Thanks so much. Mike
@jimmunhall
8 жыл бұрын
Ty, although I have a different model ice maker this video helped me fix mine. It appeared I had a small chunk of ice stopping the tray from making its full return to position before refill. It wasn't refilling and I had thought it was a water issue and it was not. Thanks for showing me the cycle button, that's all it needed 😄
@N-Scale
8 жыл бұрын
+Jim Munhall More than welcome Jim , Glad to help. Mike
@kuratsunicole
5 жыл бұрын
Thank you Mike! Just replaced mine with an ice tray from Amazon...very reasonable. I appreciate you putting this up!
@N-Scale
5 жыл бұрын
Thanks , Glad to help. Mike
@ryanlee8361
8 жыл бұрын
I had the exact same problem with my ice tray. It actually looked identical to yours. When I called Samsung to get the correct part number so i could order a new ice maker, they told me the repair would need a technician to come out. Instead of buying a $90 ice maker, I watched your video and spent $4 on the tray, $6 on shipping and only 15 mins to complete the whole thing. Thanks for saving me time and $!
@N-Scale
8 жыл бұрын
+Ryan Lee Thanks Ryan , Glad to help and glad you saved some bucks. Mike
@vickystevens1282
8 жыл бұрын
Mike you are my hero! I had the exact problem with my side by side Samsung model RS277ACRS_XAA . This happen when I was out of town and water ended up leaking onto my hardwood floor which ended up causing damaged it. Our well water is very hard and over time the ice tray gets mineral deposits. The mineral deposits interfere with the ice tray emptying. Getting the ice collection bucket out was my biggest challenge. Being a woman I own several trusty blow dryers. When heat is applied in the optimal direction - ice is no competition to a determined grandma on a mission. Bless you Mike for taking time to make your video - you are a lifesaver. I'm Forever grateful, Happy woman and a appreciative Acute Critical Care Registered Nurse from Idaho, Ms. Vicky
@N-Scale
8 жыл бұрын
+Vicky Stevens Thanks so much Ms Vicky. H am so glad when I can help someone as you likely are. Thanks , Mike
@logitechrevue
3 жыл бұрын
Thank you. It is always nice knowing how to disassemble something without breaking it in process.
@N-Scale
3 жыл бұрын
You are very welcome. Mike
@rayhelvy9947
8 жыл бұрын
I decided to look at this, thinking to get some general help with my ice maker problem. It turned out that this was my exact issue: a cracked tray, where I could not see the crack until I had pulled my unit out, as shown in the video. I got my order in to appliancepartspro (I've dealt with them before, too, and have always had a good experience.) When the part gets here, I'll finish out the repair, and get back to lots of ice, not an ice dispenser holding a solid single massive hunk of ice. Thanks again! I'm so glad I decided to view the video!
@kylet045
9 жыл бұрын
Hi great Video, Just an FYI for other users this is the same Ice Maker as the Samsung Model RS261MDBP. It is a side by side model. I just replaced mine and and this video would have been very helpful. One thing I would mention is anytime you are connecting or disconnecting electrical ALWAYS unplug the fridge before doing so. You run the risk of damaging sensitive electronics on these pieces of equipment. Great Video!!!!!
@pennymcdanielglass9212
3 жыл бұрын
Excellent video! Thank you so much. You just saved me a lot of money and frustration! Your instructions are so clear that I know I will be able to do this and not have to call a repair man!
@N-Scale
3 жыл бұрын
So glad to help Penny. Mike
@kyleborne4224
4 жыл бұрын
Mike, Thanks for your Video! I looked and looked and you had by far the best video on what my issue was. My Thermosensor had fallen down and was hanging. I didn't have the Foam or Plastic Covering you showed. Not sure where it went. However, I did want to help you and others. If you remove the Top Tray, you can access that part & the Cover with relative ease. If my arms were longer, I'm sure I could have disconnected the wires in the back to remove the unit. Luckily that was not my problem. But your video does have me wondering which Ice Tray I have...but not going to purchase one just for the sake of buying a flex model.
@SaintNic539
7 жыл бұрын
You are great Mike ! showed me how to fix my Samsung ice maker and told me where to get the part! I got to buy the ice tray separt instead of the whole unit everyone else was selling me.Thanks again, Diane
@N-Scale
7 жыл бұрын
Thanks Nick , Glad it worked. Mike
@mikehunt0001
8 жыл бұрын
What a life saver this video was! Same model refrigerator, however, the ice maker quit making ice. Found a solid block of ice in the ice tray that would not pop out on rotation by the motor (not sure what caused this). Took everything out and inspected all parts thoroughly with no problem items found. Will try it out again and see how it goes. Thank you again.
@N-Scale
8 жыл бұрын
Thanks and glad to help. Mike
@indialpc1
3 жыл бұрын
Very helpful. I surely would have broken all the little plastic bits without your video. Thanks!
@N-Scale
3 жыл бұрын
Thank You, Mike
@KnitFit1
5 жыл бұрын
Thank you for sharing this. Your instruction was perfect to show me how to reattach the little rubber sensor holder that somehow got knocked off.
@N-Scale
5 жыл бұрын
Glad to help. Mike
@ButcherofNormandy
5 жыл бұрын
Your video helped me get my ice maker back together after it got knocked off. I really appreciate it!
@N-Scale
5 жыл бұрын
Happy to help. Mike
@richardcabitto5108
7 жыл бұрын
Mike. Found my model number,ordered part(13 bucks shipped!),replaced with you instructions,got ice! Nice.
@sunilk1204
8 жыл бұрын
Thanks for the Video. I fixed my Samsung Model RS261MDBP. Mike you explained the intricacies of of removing and replacing the ice cube tray. Well done video. You are a natural. Thanks again saving us a lot of money.
@N-Scale
8 жыл бұрын
Thanks so much , glad to have helped. Mike
@eaglesview888
4 жыл бұрын
agreed , fantastic video
@Ryan-xb9hf
7 жыл бұрын
I don't even understand why any dislikes are on this video. Showed me exactly what I needed to know. Thanks
@N-Scale
7 жыл бұрын
There are always some of those folks out there. Thanks , Mike
@roblonngren3023
7 жыл бұрын
Thanks, Mike. This is exactly the instruction I needed to replace the ice maker. Saved me a bunch of money.
@rick95798
5 жыл бұрын
I watched this video long enough for you show me where the reset button was. Amazing. Thank you.
@N-Scale
5 жыл бұрын
You are welcome Rick. Mike
@rick95798
5 жыл бұрын
@@N-Scale I have ice!!!!!!!!
@N-Scale
5 жыл бұрын
@@rick95798 YOUUUU WHOOOOO !!!!
@gideonchitsamba2378
4 жыл бұрын
Thank you Mike!Just replaced mine by following your video instruction.
@N-Scale
4 жыл бұрын
Glad help brother. Mike
@thomasinajordon2298
7 жыл бұрын
Thank you so much. I just watched your video and replaced my ice bucket. Great job!!!
@N-Scale
7 жыл бұрын
Thank You and glad to have helped. Mike
@galennordland8074
9 жыл бұрын
Easy to visualize and understand. Good job Mike and thanks for posting.
@N-Scale
9 жыл бұрын
Galen Nordland Thanks so much Galen, Mike
@hahahahagrin
3 жыл бұрын
Wow, this is exactly the issue I had, a broken tray. I gather that the original tray had material that simply broke when attempting to drop ice…then it went south ! Thanks so much for a very detailed and concise video. You have helped pass your knowledge on….much appreciated. UPDATE: replaced tray with official OEM part for only $6. All is well
@N-Scale
3 жыл бұрын
Thanks so much Jon , Glad to help. Mike
@hahahahagrin
3 жыл бұрын
@@N-Scale strangely, ice works, but never drips ice until I press button. It’s as if the thermostat is not sensing the water turned to ice..so never cycles! Did you experience issues with thermostat?
@emilygillmar1158
4 жыл бұрын
Thank you, I have a slightly different model but this video really helped me get the ice maker in and out and it was good to have the details about how they’re supposed to work!
@N-Scale
4 жыл бұрын
Thanks and glad to help. Mike
@cellularexpress1619
5 ай бұрын
Great video!! Despite being an old post I thought I'd add a little trouble shooting for those whose ice maker only makes ice by pressing the test button. With the ice maker removed, trace the clipped on ejection temp sensor wires to the plug. With an ohm meter set to 20k range, test for resistance. Mine was around 6k ohms or so at room temp. Anything close to that is likely okay. The resistance reading varies with the probes temperature. Next, with a clean paper towel, wipe the cube tray mold until it is very slick. Spray a little non-stick cooking spray onto a finger and sparingly wipe the tray's ice cube molds. Finally, reinstall the unit and empty the collection bin. Once the freezer is cold, press the reset button. listen for the refilling of water and then wait for ice cubes to freeze. A couple of hours later, count the ejected cubes in the bin. There should be eight cubes. My situation was the cubes weren't all ejecting and expecially the cube next to the ejection temp sensor wasn't falling, so it wasn't sensing the incoming warm water into the tray to start the next freeze cycle. Just my theory...I'm not an appliance repair guy. Mine is now working after taking the above steps. Hope this helps.
@Doc1310
4 жыл бұрын
Thank you, Thank you, Thank you, this was an amazing video. You showed me everything I needed to know. Mine stopped filling with water and I didn’t know about the test button. I just tried it and it operated and filled. We’ll see if that is all that was needed, if not I now know how to fix it thanks to you. Great work, you saved me hundreds of dollars I’m sure. Merry Christmas!
@N-Scale
4 жыл бұрын
Thank You Paul and Merry Christmas.
@Mr.Helper.
Жыл бұрын
Sir you save me a lot of troubleshooting ... All i had to do was hit that reset button (which i had no idea existed) and the ice maker started working again .... thanks for the video
@N-Scale
Жыл бұрын
Glad it helped !!!
@brazeagle
6 жыл бұрын
Just FANTASTIC. Thanks to folks like you Mike, our lives become easier...Cheers buddy.
@N-Scale
6 жыл бұрын
Thanks Luiz, Glad to help. Mike
@damonlees156
6 жыл бұрын
Thank you Mike for this very helpful video. Although my Samsung refrigerator and ice maker assembly were slightly different models than what was shown in the video, the removal of the old assembly and install of the new one were essentially the same.
@N-Scale
6 жыл бұрын
Thanks so much Damon , Glad It helped. Mike
@Vonstar29
5 жыл бұрын
Hi again..... I ordered a new part as it was the motor that went. I purchased the ice tray and motor together, it doesn’t come with the housing, though that’s fine as it just clips out, but I’m sure you could get it, if needed ...... THANKS TO YOU ..... I still saved a ton on money fitting it myself.... SO glad to get my ice maker back...... for anyone in the UK.... you can get spare parts from many appliances from “ESPARES” at a great price and fast delivery. Great video.....and thanks again 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
@N-Scale
5 жыл бұрын
Glad it helped !! Mike
@onebronx
3 жыл бұрын
In my case the electric connector was not plugged in all the way down, and the motor stopped in an intermediate position on a second day after installation. When I pulled the ice maker assembly, the connector plug disconnected too easily because the latch was not engaged. Seems like a lazy job (or sabotage?) on the Samsung assembly line. No replacement was required, just reconnect properly. Thanks to you and your video, it saved me a call to Samsung!
@N-Scale
3 жыл бұрын
Glad it helped brother !!
@coope1192
6 жыл бұрын
Awesome video. I ordered a new ice tray for $7 and it fixed my problem. My ice was not dumping cubes but instead was clumping. The new ice tray solved it.
@N-Scale
6 жыл бұрын
Thanks and glad to help
@RagnamanEXE
7 жыл бұрын
Thanks. The ice tray broke in half and your video helped in figuring out how to open it and replace it.
@N-Scale
7 жыл бұрын
Thanks , Glad to help. Mike
@ddoguet
8 жыл бұрын
thanks for this. would never have figured out what i was missing or how to get it back together without this video. that rubber bit has been sitting in a drawer for a couple of years now while the machine made big blobs of ice...
@necropalypse
7 жыл бұрын
Thanks a lot! Turns out all we needed to fix ours was just a Phillips screwdriver. We've had a problem with ours for over a month now and it turned out to be a simple fix.
@N-Scale
7 жыл бұрын
Thanks , glad you got it. Mike
@CheriAnderson44
9 жыл бұрын
Thank you so much Mike for the fantastic video. I was able to replace mine in a matter of minutes...the hardest part was having the correct screwdriver and getting it started. You are a lifesaver. :)
@N-Scale
7 жыл бұрын
Thanks , Glad to help. Mike
@kathyhconrad
5 жыл бұрын
Oh my goodness. You just saved us hundreds. Thanks so much! Great video!
@N-Scale
5 жыл бұрын
Glad to help Kathy. Mike
@whitneygilbreth1434
5 жыл бұрын
First off: Thank you for getting this video out there, it has helped greatly. That being said: New problem: The mechanism works it fills the ice try appropriately but it does not dump as often as it should. I'm getting very few ice dumps, but I'm not sure what would be causing this issue. Anyone possibly know why it won't dump the ice in the bucket? Is there a temp sensor that is telling the machine to dump the ice?
@eaglesview888
4 жыл бұрын
I know this is a year later, but try and ensure you not over freezing.... Temp should be between -13 and -18 MAX... Ice expands, might be why it does not drop out easily ... long shot, but try... This is for somebody, probably not you Whitney Gilbreth :-)
@angelapierred6461
7 жыл бұрын
Perfect! I've found two great videos today that will help me repair my frig! I'm excited!
@N-Scale
7 жыл бұрын
Hope it works out for you. Mike
@Shortie-xu6zi
7 жыл бұрын
Thank you!! I was able to do this myself and saved hubby from having to do it when he got home.
@N-Scale
7 жыл бұрын
Thanks , Mike
@richardcabitto5108
7 жыл бұрын
Thanks Mike!!! Had the exact same issue with my crazy ice maker! This one was cracked along the left hand side and I did not know what to do about it. Now with your help, l should have no problem at all replacing the tray! Awesome vid and big help
@glenleis8115
2 жыл бұрын
Brilliant! Precisely what I needed to deal with my Samsung RB195ZASW's ice maker. Thank you sir.
@N-Scale
2 жыл бұрын
You are more than welcome Glen !!
@DarinHibbs1
7 жыл бұрын
You are a good soul to take the time to walk me through that process
@N-Scale
7 жыл бұрын
Thanks so much and Glad to help. Mike
@hankmoore4053
3 ай бұрын
Nice job Mike. Excellent detail and easy to follow
@N-Scale
3 ай бұрын
Thanks so much Hank !!!
@soylentgreen2065
5 жыл бұрын
thank you for making this video. very thorough and clear instructions. well done!
@N-Scale
5 жыл бұрын
Thanks , Mike
@mrferniehernandez
3 жыл бұрын
Mine makes ice but does not dump it unless I press the test button. what causes that? is it the thermosensor?
@lindalombardo2503
8 жыл бұрын
Mike, Thank you so much. Easy to follow. Not the least bit intimidating. Saved me probably 150. dollars or more for a simple cracked ice tray. Just about to order one online. Hardest part was trying to reach in to unplug the unit wires. I hope it won't be too tricky to plug them back in. I'm sure it will be fine. Great video. Totally clear and didn't drag on and on. Got to the point.
@N-Scale
8 жыл бұрын
Thanks Linda , Hope it all goes well. I have faith in you. Mike
@mrs.l.4066
5 жыл бұрын
Thank You so much. Ours was a little bit different but the same set up. You were a life saver
@N-Scale
5 жыл бұрын
Thanks and so glad to help. Mike
@DJOPELISHERE
Жыл бұрын
Excellent video and parts I bought from your site!!❤❤❤❤❤
@jfdemarle
6 жыл бұрын
Very helpful. Saved a bundle. Had to replace the plastic bracket that holds the foam thermostat holder. Cost $14 on Amazon.
@N-Scale
6 жыл бұрын
Thanks and glad to help. Mike
@jshibley5435
5 жыл бұрын
Mike, excellent demo. Wish all how-to’s were as well made. Exactly what is needed to know, thanks much.
@N-Scale
5 жыл бұрын
Thanks Joe and glad to help. Mike
@corarice4188
6 жыл бұрын
This video was really helpful. My sensor came loose and I could figure out were to put it. Great video, really simple to follow.
@N-Scale
6 жыл бұрын
Cora, Thanks so much and really glad to help. Mike
@lilystgo1
11 ай бұрын
Thank you so much for sharing this video. Super easy to follow and understand.
@N-Scale
11 ай бұрын
Thanks and glad to help. Mike
@goGREED
4 жыл бұрын
My thermal sensor popped out, you instructions showed me how to put it back, thank you for making this video.
@N-Scale
4 жыл бұрын
You are more than welcome
@amireltaief
6 жыл бұрын
Thank you. Your video allowed me to diagnose what is wrong with mine. The plastic holding the pivot point is broken so when the tray tries to flex when the motor over runs it moves at the pivot point and the tray does not flex. No ice dump. Followed by overflowing. Thanks
@N-Scale
6 жыл бұрын
Thanks Amir , and I am glad it helped. Mike
@sammieconelly4819
3 жыл бұрын
I know its years later but what did you do to fix yours. Mine doesnt turn over all the way to flex the tray.
@tinkerbell24ful
9 жыл бұрын
Thank you for your knowledge, time to make a video . It saved me money fixing ice maker. Thanks again, Mike.
@N-Scale
9 жыл бұрын
Kelly Huynh Thank You Kelly and glad to help. Mike
@jeremystahl773
9 жыл бұрын
thanks so much for video, I am not a handy person and was about to call a repair man who probably would of way over charged me and make me buy unneeded equipment, but I was able to fix it and it only cost me $3 for the tray. Thanks again!
@N-Scale
9 жыл бұрын
+Jeremy Stahl Thanks Jeremy , glad to have helped. Mike
@kathycresswell8353
8 жыл бұрын
Thanks Mike! Great video! I didn't even know there was a test button on the thing. Our frig is 12 years old and holding up great, but it was never very good at making ice. Now the tray is not ejecting the ice. When we take a closer look, we'll know just what to look for. Hopefully, we'll get a bigger tray also if that's what needs to be replaced! Really appreciate you sharing your expertise.
@N-Scale
8 жыл бұрын
Thanks Cathy , hope all works out well. Mike
@RhinoXpress
5 жыл бұрын
You're right there was a modification to the ice tray. the Samsung DA63-02284B Ice Tray is the updated version to the Samsung DA63-02284A Ice Tray, but read the discription carefully when buying a new one, because some sites still sell the old DA63-02284A Ice Tray version.
@b727pilot
7 жыл бұрын
Seriously Thanks for the video! Money saved an Wife is Happy 😊!! Need I say more!!! Thanks again
@N-Scale
7 жыл бұрын
Thanks , I am so glad it helped. Mike
@annmariesutherland5924
4 жыл бұрын
Thank you for your helpful advice, instructions and extremely helpful video with step by step instruction.
@N-Scale
4 жыл бұрын
Glad to help. Mike
@wuskers
4 жыл бұрын
Mike, I have the same model, it stopped making ice completely. It would not turn even when the reset buttons as pressed. I replaced the whole assembly and it turns and works now but only makes ice once or twice a day total. Any suggestions?
@N-Scale
4 жыл бұрын
Nope , sorry , I have no clue. Mike
@wood5star
8 жыл бұрын
Excellent video! Thanks for taking the time to make this.
@N-Scale
8 жыл бұрын
Thanks J , hope it helped. Mike
@tanzj
9 жыл бұрын
Mike, I fixed mine by replacing it with a different brand. John
@N-Scale
9 жыл бұрын
John Tanzillo Way to go John !! Mike
@luckyfamilyman
5 жыл бұрын
Dude 🤣 Amen Brother worst investment of my life Samsung fridge I would never get another Mine would kick out ice onto the floor to break our necks no joke
@adrianamorales818
4 жыл бұрын
@@luckyfamilyman kick ice to the floor???
@paulanderson8392
8 жыл бұрын
Thank you for the great video. My ice machine, in a similar Samsung freezer,stopped making ice..The tray was stuck in the "dump" position"( not broken or cracked)and did not return to the upright position. I banged (*lightly) on the motor unit with a wood spoon, tried the reset button and this freed up the ice tray that was stuck in the dump position.. The tray returned to the upright position and filled properly. Hopefully, this is all it was. Not sure what caused it to "stay" in the dump position but I'll defrost the unit and see if this keeps it from getting stuck again. Thanks again..
@N-Scale
8 жыл бұрын
Thanks , Glad to help. Mike
@Delmar829
7 жыл бұрын
Thank you so much for this. I learned a lot. Great instruction.
@N-Scale
7 жыл бұрын
Thank You, Hope it helped. Mike
@paulhernandez7623
5 жыл бұрын
Great video. Had the same problem with mine and fixed it the same way. Didn't miss anything on the video. Very helpful. Thanks.
@N-Scale
5 жыл бұрын
Thanks so much Paul. Mike
@Halibut2
7 жыл бұрын
My ice maker had become an ice waterfall, ending on the wooden floor under the fridge. I turned the water off, cleaned all the ice from the freezer section, when I discovered the ice tray had overfilled and turned into a block of ice that would not release. It would recycle and release more water - thus the ice waterfall. I found this video, and while the ice maker was not identical, it was functionally. It took five minutes to get the ice maker out, another five minutes to free the ice from the tray, and another five minutes to re-install the ice maker. Now I wait, with great confidence that the problem is solved. I suspect the initial problem was that the ice bucket was not re-seated properly after being emptied. Thank you very much for this video!
@N-Scale
7 жыл бұрын
You are welcome and I hope it works for you. Mike
@Halibut2
7 жыл бұрын
Like a champ! Thanks again - I may have a new career.
@mightymike3716
9 жыл бұрын
Thanks for the video. I'm thinking I have the same problem. Glad to hear it's an easy fix
@N-Scale
9 жыл бұрын
***** It really is, Thanks , Mike
@hepi822
4 жыл бұрын
Thank you so much. You make it so clear and easy. I fixed mine already.
@humblelion5
4 жыл бұрын
Well explained. Thank you!
@brianroy9084
5 жыл бұрын
Ty very much for this awesome video. You saved me tons of money.
@N-Scale
5 жыл бұрын
Thanks Brian , glad to have helped. Mike
@jessicamorgandvm8707
5 жыл бұрын
Excellent video and instruction! Thank you for sharing.
@N-Scale
5 жыл бұрын
Thanks , Hope it helped. Mike
@billkessel9552
4 жыл бұрын
Thank you for taking the time to show this!
@N-Scale
4 жыл бұрын
Thanks Bill , hope it helped. Mike
@N-Scale
9 жыл бұрын
Adolfo here is the link where I bought my parts. www.appliancepartspros.com/ Thanks , Mike
@wilmerfajardo8488
7 жыл бұрын
Excellent video. Thank you for detailed step by step explanation
@N-Scale
7 жыл бұрын
Thanks and hope it helped. Mike
@ricklafford8993
7 жыл бұрын
Thanks for the excellent video. My icemaker is working but makes nothing but broken cubes. Now I have the knowledge to pull the unit and investigate.
@N-Scale
7 жыл бұрын
Thanks Rick, You can do it. Pretty easy. Mike
@lindalombardo2503
6 жыл бұрын
I only get broken cubes. That's all I have ever gotten. That's fine with me. I can't imagine why they don't pop out in one piece.
@ocaptainnc
4 жыл бұрын
I’ve been getting broken cubes for about a year now… Don’t know why.
@yscho33
7 жыл бұрын
This video is very informative and useful. Mike, you are a good man. 감사합니다(Thank you)
@N-Scale
7 жыл бұрын
Thank You Yong, Mike
@kevinhowden787
10 ай бұрын
Thank you for making this video. So helpful!
@N-Scale
10 ай бұрын
Thanks Kevin !!!
@stablepar
7 жыл бұрын
Thank you so much. Tray was $4.40 and shipping was $6.25. The part got to us within 5 days. I shudder to think what it would have cost for a repairman.
@N-Scale
7 жыл бұрын
Thanks , Glad to help. Mike
@framejia123
8 жыл бұрын
I smacked the motor a couple of times and finally the tray went back to the original position after being stuck in the twisted position. I am hoping now it works after a few hours. If it doesn't then I will have to call for service since I think it might be the motor plus we have warranty on it. Thanks for the video.
@N-Scale
8 жыл бұрын
Hope it works for you. Mike
@MasterRons177
Жыл бұрын
Thank for helping me and my dad fixed it
@N-Scale
Жыл бұрын
You are more than welcome !!!
@N-Scale
Жыл бұрын
Thanks , Mike
@neatigloo
7 жыл бұрын
Mike, Thanks so much for your great video! This tutorial saved me money!
@N-Scale
7 жыл бұрын
Thanks John , Glad to help. Mike
@dittos100
2 жыл бұрын
You made resetting so simple. Thank you
@N-Scale
2 жыл бұрын
Glad to help Marty , Mike
@sienoesome2529
7 жыл бұрын
Mike, it was a good video; My question is what do you call that plastic water dispenser into the ice tray, because my is keep freezing up?
@N-Scale
7 жыл бұрын
I have no idea what it is called. I am sorry. Mike
@robynr447
6 жыл бұрын
That is the water inlet guide. On mine it has a soft-rubber end to it that the tray bumps into when in the ejecting/twisted position. I am imagining that this is to knock off any chunks of ice or clog in the end before trying to re-fill. If this is bent out of position or missing the soft end you could potentially freeze up here. Just did the tray replacement! Thanks Mike!
@bradwilson3408
5 жыл бұрын
Man your're awesome!! Great video. Thank you very much
@N-Scale
5 жыл бұрын
Glad to help Brad. Mike
@clzjj
4 жыл бұрын
This was helpful. If the test button does not work, does that mean the motor is broken?
Пікірлер: 492