Thank you for showing the spray paint part. Nobody does that. It’s so frustrating. It’s an easy step, but one I’ve been wanting to see. So thanks!
@TruthSeekerNC
5 жыл бұрын
I LOVE the Martha Stewart diamond shaped glitter! It really gave it a glitter and shine!
@jeanettejames5528
4 жыл бұрын
This is so calming to watch and very beginner friends surprisingly. Gorgeous 😍
@marylebaron3449
7 жыл бұрын
Love the glitter colors on that geode cup!! It would look great just the way it is. ;)
@dameandduchess4227
5 жыл бұрын
Love your results! I do think it's important for people to know the cuptisserie you use is made to experience specifications. Crafters never give away all their tricks. Be prepared to test trail and test again no matter what video you watch.
@skylersmommy1410
7 жыл бұрын
Thanks so much for all your videos. I think i need a cup just glittered like that!
@angelsmith4467
5 жыл бұрын
These are truly stunning 💖
@tammygola975
6 жыл бұрын
Awesome. Thanks for the tutorial
@chandraheidel355
6 жыл бұрын
OK did anyone have instant anxiety when the spray paint covered the gorgeous glitter!? 🤣
@choclitsuga
4 жыл бұрын
can u use fine glitter - don’t like chunky?
@bellamujer85
4 жыл бұрын
Hello, how long do you let the epoxy dry before you paint?
@vraifille
6 жыл бұрын
Heather, you mix up a LOT of epoxy! Do you do something with what's left in the cup?
@kjudy09
5 жыл бұрын
Where do you find your gallon jugs of amazing epoxy with the pumps
@artisticpiscean
4 жыл бұрын
Buy epoxy then buy pumps to put on top. Pumps can be bought pretty much anywhere.
@margielamfers4455
4 жыл бұрын
I bought the gallon size epoxy on Amazon, and the gallon size pumps on artresinfauxrizzle.com... that’s the only place I could find them. Everywhere else was sold out. Hope that helps!
@amandajones1111
4 жыл бұрын
do you have to spray paint clear after u chunky the glitter and before the next layer of epoxy.
@naomichristman729
5 жыл бұрын
I think the tumblr is pretty without any paint. Would you have to use the paint? Could just the glitter part be a finished product?
@FeatherBearDesigns
5 жыл бұрын
Yes absolutely, this is just a technique I was asked to share:)
@racquelknowles3536
4 жыл бұрын
Did you let the glitter dry over Night before you spray it? How do you know what color spray paint to use or it doesn't matter
@ahauck1283
5 жыл бұрын
Thank God for you Mama! This is supposed to be the first (and best or easiest) way to start learning how to make the epoxied tumblers! Wish me luck 😬🤦🏼♀️🤣
@momwesselman2928
5 жыл бұрын
FeatherBear Designs I love love your videos, can I ask, what do you do with the extra epoxy? seems like it would be a waste if you dont accurately measure to have enough.
@xavieliz56
5 жыл бұрын
With what do u clean the paint that can go inside the cup?
@55shocked55
5 жыл бұрын
Acetone. Be CAREFUL to not let acetone touch the outside. But that's what I use
@218dreamer10
5 жыл бұрын
I have a question. My cup was perfect. I added my layer of black. Let it dry completely then added purple. Both spray paints are Rust-Oleum paint+primer, but the purple doesnt seem to want to dry...well it is tacky anyway. Did I miss something or what do you suggest?
@cherm1217
7 жыл бұрын
Night made!! Thank you!!
@emartandcraft2514
3 жыл бұрын
Thank you
@FeatherBearDesigns
3 жыл бұрын
You're welcome
@jessesharp835
5 жыл бұрын
Do you have to use 3 spray paints? I only have black and white right now 😞 could I do white black white?
@Sheila_TheCraftingFeet
5 жыл бұрын
What's the brand name of the epoxy & is the epoxy food safe since you used it so close to where your mouth would go? TBH, I like the fine glitter better. That tumbler's lookiin' great! Can you use any blank tumbler? Shake, shake, shake, shake your glitter! LOL!
@baileywhite663
5 жыл бұрын
Alumilite
@tennessee6342
4 жыл бұрын
What is the best way to deal with slighty tacky cups?Its been a seek.It is just very slightly tacky.Can I poxy over it?
@kayleerowe1614
6 жыл бұрын
awesome videos! and aww your so beautiful.
@airfilmsproductions
5 жыл бұрын
Pretty good
@thanks577
5 жыл бұрын
So I prepared cup, epoxy, glitter and two coats of epoxy. Does it have to be completely smooth before spray paint?
@samuels1mom
5 жыл бұрын
So can I sand my cup down to make sure its smooth and then spray paint or does the epoxy have to be perfect before I spray paint?
@Ren0501
5 жыл бұрын
that's my question too!
@mariagalvan2884
4 жыл бұрын
You can clearly see she didnt sand it down before painting it
@ravenprince2533
4 жыл бұрын
Sanding is a preference, I sand my cups beforehand.
@natashaherrera5151
7 жыл бұрын
that is amazing
@honey562012
6 жыл бұрын
OK, why the 3 colors of paint and does it have to be 3? Does it matter about the color choices as long as it goes from dark to light? You stated that you let it cure after applying the glitter before adding the next coat of epoxy. Did you let it fully cure? TIA and thanks for sharing.
@nrs1321
5 жыл бұрын
honey562012 I was wondering why the 3 layers too. I understand the 2 as I could see the black under the wipe when it was wiped with acetone to reveal the glitter but I thought it was hard to see the blue as the 2 color
@amyjohnston2692
5 жыл бұрын
To make it look dimensional... Y’all can use what you like
@margielamfers4455
4 жыл бұрын
How long do you let the epoxy cure before you place the first layer of spray paint?
@aprilalfred2151
5 жыл бұрын
Could I please ask what else can you use besides acetone to take off acrylic paint when making a geode tumbler?
@czintx
7 жыл бұрын
Do you have to use chunky glitter or just the different colors? Thank you
@sandragarza8031
5 жыл бұрын
Hi there why do you put so many layers and colors of spray paint? Does it help it look better? I want to attempt one but just trying to figure out the process thx
@daniellecurtis7354
4 жыл бұрын
If I need to sand to smooth for spray paint do I need a new coat of epoxy before I spray?
@hollymyers2626
7 жыл бұрын
What do you have you cup sitting on... did you use a green foam... football or something else.
@hdmt2010
6 жыл бұрын
When it comes to epoxying the tumbler, can you use a brush to do that or do you find it best to use your hand?
@kittkatt032
5 жыл бұрын
Where did you get your cup turner? My husbsnds thinking about making one, but i like yours. Its simple.
@BumblyBeeCrafts
5 жыл бұрын
Most people get a rotisserie turned machine and modify it. Hope it all goes well for you!
@jasoncolwell5483
4 жыл бұрын
Do you use the whole cup of epoxy on the tumbler? I only mix 10ml of each part.
@NDudley73
4 жыл бұрын
What did you do to the bottom of the tumbler?
@Britneymphotography88
4 жыл бұрын
I am a first timer i am going do my first cup today does the first epoxy need to be turn on couple hours? or can i put on Glitter right way? I am just practicing and when would i need the heat gun after Glitter is dry?
@emmibby86
4 жыл бұрын
Lucky Charm you will want to apply the glitter right after applying the first coat of epoxy. Let that dry over night and then apply another layer of just epoxy before spray painting it. Hope that helps 🤷🏻♀️
@CrazyKid2123
7 жыл бұрын
How do you NOT get spray paint or epoxy on the inside of the tumbler?
@FeatherBearDesigns
7 жыл бұрын
sometimes i do, it removes easily, paint removes with acetone, epoxy can be gently chipped off with a weeding tool
@emmibby86
4 жыл бұрын
Does the spray paint have to be gloss? Can I use flat or no?
@kristenstueck1
5 жыл бұрын
What is the part A & B I am new to this what products do I use thanks
@emilyjohnson2189
5 жыл бұрын
kristenstueck1 epoxy
@kittkatt032
5 жыл бұрын
Some people put mod podge on the cups and then glitter, then seal with mod podge, then epoxy. Would that work aswell?
@lindablakemore2022
6 жыл бұрын
Can you use Recollections chunky glitter? I can't find any holographic glitter where I live. I went on ebay and nothing there either.
@DanielaKatharina1986
6 жыл бұрын
Beautiful end product and great tutorial!!! Do you typically use 3 different colors of spray paint ? The blue/turquoise spray paint as the middle layer doesn’t really show through in the end ?
@Motherheckin
5 жыл бұрын
So many people have asked and I can't find an answer
@SunshineAndStorms81
5 жыл бұрын
Using the different colors gives the layered effect.
@semutehrogers2614
5 жыл бұрын
New fan here! Why do you prefer Hogg over other brands?
@Hellokittyguh
6 жыл бұрын
after the first layer of epoxy and glitter cured couldn't you have sand it a little on the spots where the glitter was sticking out? and then put the second layer of epoxy that way the spay paint part would look smoother
@deannacarr6536
5 жыл бұрын
why did you do 3 colors and could I use blue instead of the black? Thank yo
@Nica2008
7 жыл бұрын
Maybe I didn't catch it, but how long did you wait to apply the second coat epoxy? Was it the general 24hrs?
@FeatherBearDesigns
7 жыл бұрын
i do typically wait 24 hours unless its a rush cup, which i avoid doing
@goose7574
6 жыл бұрын
Love your videos, but just a thought, maybe you could link the second part, that way people don't double on to a different video. :)
@photogrl001
6 жыл бұрын
can you please link where to get the big things of epoxy part 1&2 with pump like you have.tks
@neurologylove2135
5 жыл бұрын
Amazon. The Alumilite store has it too.
@jamieolszewski9425
5 жыл бұрын
Do u have many problems with fumes I broke out after using a brand of epoxy
@natashaherrera5151
7 жыл бұрын
my mind is blown
@racquelknowles3536
4 жыл бұрын
Could I use regular glitter for this?
@ChasingFidgets2
6 жыл бұрын
Do you put anything to protect the inside of the cup when you epoxy or spray paint? Do you ever get it inside the cups?
@heatherjensen99
6 жыл бұрын
Brittany Saltlifeteacher I was just thinking the same thing
@FeatherBearDesigns
6 жыл бұрын
Brittany Saltlifeteacher I do not. It rarely ever gets inside, if it does I allow it to cure, and iit will come right off, I use a weeding tool to pop it off, :)
@FeatherBearDesigns
6 жыл бұрын
I also added a video on a cup hack....check it out, for spray painting
@mstamelya
5 жыл бұрын
FeatherBear Designs what the name of the expoxy you use?
@desireeorozco9686
5 жыл бұрын
Ya, what's the name of epoxy, I need larger then 16 ounce:-) what works good.?
@JustSaytheWordLLCGINAGIL
5 жыл бұрын
How do you clean up the inside from all the paint?
@Iammrswheelous
5 жыл бұрын
I didn’t see the part where you removed the spray paint. It cut off at 22 minutes. Is there another video continuing the steps?
@sonyacox5732
6 жыл бұрын
When you spray your tumblers, does it matter how many coats you apply or in what order?
@Motherheckin
5 жыл бұрын
So many people have asked and I can't find an answer
@chanamack1340
7 жыл бұрын
Can you please tell my why you have the wood shimmied in between the motor? I am having trouble with my cup skipping and the bar coming out of the hole in the motor
@FeatherBearDesigns
7 жыл бұрын
Chana Mack to bakance the cup, my was at a tilt, it help it stay straight
@FeatherBearDesigns
7 жыл бұрын
Watch for the single cup turner video Im going to do this weekend. It will explain the whole thing
@bellahecate
6 жыл бұрын
FeatherBear Designs will you still be posting the video on the single tumbler turner?
@FeatherBearDesigns
6 жыл бұрын
Amanda Marie Pitts YES! Within the next couple of days. Thank you for your patience
@bellahecate
6 жыл бұрын
FeatherBear Designs Awesome! ty!
@brittanyberry9207
5 жыл бұрын
Do you have to have more than one color glitter?
@redbonestunna
5 жыл бұрын
is it ok to sand the cup before spray painting?
@honey562012
6 жыл бұрын
Where did you get your turner? I finally found the silver holographic glitter after replaying your video and hearing what it was named. I liked it the best of all of the glitters. I want to try to get into this cup thing but it seems to require a lot of supplies that I don't have especially the turner but I want to give this art a try. TIA
@missywilkins3903
6 жыл бұрын
I got a grill rotisserie from the hardware store and mounted it to wood.
@Lovaa85
5 жыл бұрын
@honey562012 where did u find the glitter I'm trying to locate it as well
@susanflowers9240
6 жыл бұрын
Love your video.. you said use equal parts of epoxy what epoxy are you using and mix it with ? You said part A and B equal ...is that epoxy and water or both epoxy ? Is there an Epoxy A and Epoxy B that I need I am very new this will be my 1st attempt thanks
@SaSSYLiCiouSPiNKSPaRKLeTiNi
6 жыл бұрын
susan flowers epoxy comes as a set, part A and B.
@audramcc26
5 жыл бұрын
Epoxy comes in parts A and b
@the.imprint
5 жыл бұрын
Somewhere between 14:20 and 14:30, is that a ghosts?
@haileypyatte4725
6 жыл бұрын
is it easier to use your hand to coat the cup with epoxy than with a foam brush?
@FeatherBearDesigns
6 жыл бұрын
Hailey Pyatte oh yes!!!
@bobbilovelace7885
5 жыл бұрын
Absolutely beautiful I'm new to this and am waiting to do a photo one do you know how to go about making? Thank you
@steviepaul1868
5 жыл бұрын
do you have to use chunky glitter?
@rachellekeim9506
6 жыл бұрын
Ok so I have never epoxy a tumbler before. Do you keep it spinning for the 24 hours or just until it’s not “dripping”
@TheTumblerUniverse
6 жыл бұрын
just until its dry enough to touch and move to a place it can complete the curing process.
@BloodSweatnBass
7 жыл бұрын
Do folks intend to drink from these tumblers? if so, How do you protect the inside of the cup from these processes?
@FeatherBearDesigns
7 жыл бұрын
the inside is not affected and is thoroughly cleaned before being given to the customers:)
@rosacampos9977
4 жыл бұрын
Can I do the top the same way. It silver can I paint it and then put glitter on it
@rosacampos9977
4 жыл бұрын
I'm talking about the lid of the cup
@AnkisCreation
6 жыл бұрын
Thank you💕
@lynettepadilla3139
6 жыл бұрын
What kind of glitter? Super chunky or chunky?
@rachellekeim9506
6 жыл бұрын
I see videos where people sand the epoxy. Do you do that. If so at which stage?
@FeatherBearDesigns
6 жыл бұрын
Rachelle Keim I avoid sanding at all cost. I ONLY sand if there is a big piece of stubborn glitter. Or a ridge in my epoxy
@angieveasey671
4 жыл бұрын
where do you get the stamps for the alcohol ink
@ACLU-kl7tm
5 жыл бұрын
Do you get your glitter from many different companies
@dianaarmendariz78
6 жыл бұрын
How many ml's is a pump of each part? Thank you for the tutorial!
@neurologylove2135
5 жыл бұрын
I use 15-20 ml.
@margielamfers4455
4 жыл бұрын
That depends on the pumps themselves... different pumps will give you different amounts…
@shaymonae7846
7 жыл бұрын
im sorry i didnt catch where you got your tumbler from? thank you
@wsessions
5 жыл бұрын
Hoggs are sold by the Stainless Depot
@michellemauer6857
6 жыл бұрын
What do you use as a stirrer? I always use Popsicle sticks but looking for a more reusable way lol
@michellemauer6857
6 жыл бұрын
for epoxy*
@FeatherBearDesigns
6 жыл бұрын
Michelle Mauer I was using a siilicone cake spatula, but I use popsicle sticks mostly lol
@VICIOUSBEAUTIES
7 жыл бұрын
So why epoxy and not mod podge? Would you suggest using epoxy over mod podge? I'm just confused & is this the EasyCast epoxy? Thank you!
@FeatherBearDesigns
7 жыл бұрын
The Soaping NightOwl Beth Sannes it's easier to get chunky glitter yo lay flat. Less epoxy to get a smooth coat
@VICIOUSBEAUTIES
7 жыл бұрын
Thank you! Makes total sense now!
@FeatherBearDesigns
7 жыл бұрын
amazing clear cast epoxy from alumilite.com and epoxy as a base works best for chunky glitter, it helps it lay flat
@jenniferlawton6576
5 жыл бұрын
HELP!! I can't find anything that will hold my 30oz Hogg cups! They keep falling off! What should I use?
@niftynurse
5 жыл бұрын
Jumbo pool noodles from Target!
@shayecox2028
5 жыл бұрын
Is enamel spray paint over the glitter going to withstand a dishwasher ? or do you recommend epoxy for dishwasher ?
@neurologylove2135
5 жыл бұрын
You aren't supposed to put tumblers in the dishwasher regardless because it ruins the vacuum seal 😊
@michellerusby2709
5 жыл бұрын
Can you put a list of all your supplies you would need
@Xoxo033
3 жыл бұрын
Off subject but you’re really pretty 😊😊
@dilligaf212
7 жыл бұрын
is there anything you can do if your cup is still tacky after a coupe days?
@FeatherBearDesigns
7 жыл бұрын
make sure your epoxy is prooperly mixed, and equally measured, then apply another coat
@nicforet
7 жыл бұрын
How do you remove the spray paint from the inside of the cup before using?
@FeatherBearDesigns
7 жыл бұрын
if there is any, i use acetone, and then wash very thoroughly afterward.
@sppacmap
6 жыл бұрын
What are you using to rotate your cup? Can't seem to find anything. TIA!
@FeatherBearDesigns
6 жыл бұрын
Pam C check out our other videos, we share how to build a fee different styles:)
@barbaraleverington891
5 жыл бұрын
It is a bbq rotisserie motor
@chelseanhalle23
5 жыл бұрын
What is the link to get the epoxy in the gallon sizes?
@JackiD14
7 жыл бұрын
Is 7 hours long enough to wait after glitter before 2nd epoxy?
@FeatherBearDesigns
7 жыл бұрын
typically yes, ig your cup is really tacky, wait a bit longer
@cheycooper1974
5 жыл бұрын
At what point do you add a decal?
@medusa729
5 жыл бұрын
Where did you find the machine to go into the cup and turn it around?
@FeatherBearDesigns
5 жыл бұрын
My husband built it
@barbaraleverington891
5 жыл бұрын
It a bbq rotisserie
@stephaniemason2201
5 жыл бұрын
Can you can you use acrylic paint instead of spray paint
@SoupsJamZ
7 жыл бұрын
Did I miss the last part of the video somewhere or has it just not been posted yet?
@FeatherBearDesigns
7 жыл бұрын
Its on its way!
@SoupsJamZ
7 жыл бұрын
FeatherBear Designs ok thought something was off with my iPad. 🤗
@FeatherBearDesigns
7 жыл бұрын
Thank you for caring and all your support. Part 2 is up and live now!!
@ACLU-kl7tm
5 жыл бұрын
WHERE do you get your gallon size epoxy? and what brand
@neurologylove2135
5 жыл бұрын
It's clear cast from Alumilite.com
@loveheather79
5 жыл бұрын
Can you send a link for the diamond shaped glitter, I’ve searched everywhere (eBay also) and can’t find it! Help! Lol!
@ashleybenefield1898
7 жыл бұрын
I cant find that martha stewart sterling diamond glitter you have. Can you leave a link?
@FeatherBearDesigns
7 жыл бұрын
it was a set from ebay, not sure if its available anymore:(
Пікірлер: 227