“Where the hell are the screws?” “Better put some in”
@YouTuberr285
2 жыл бұрын
🤣🤣🤣
@toxxc.5449
2 жыл бұрын
Literally
@parisgorospe7709
2 жыл бұрын
He put flex glue
@esarnnbs
2 жыл бұрын
@@KZitemrr285 2
@droptopgaming4725
2 жыл бұрын
@@parisgorospe7709 what does that have to do with this comment thread?
@min_jeez2729
2 жыл бұрын
*Moving day:* "Jack, make sure you unscrew and dismantle the big furniture so we can pack them."
@user-yg7ph4nl8x
2 жыл бұрын
Hi How are you doing ؟
@TwOxSiDe
2 жыл бұрын
🤣🤣
@FFgaming__529
2 жыл бұрын
Good
@kinyacat5919
2 жыл бұрын
Jack: ok.... where did I hid those screws again?
@bawacanada
2 жыл бұрын
@@user-yg7ph4nl8x ko o ko 9o
@TeenageMutantZuckerTurtle
2 жыл бұрын
How to set yourself up for splinters after a couple years of use
@spritecrannberry1341
2 жыл бұрын
An easier way of doing this is dont cut the wood just drill the screws in and let them go a bit under the surface of the wood then mix glue and saw dust or you can get wood filler and fill the holes you have but remember to make sure the screws are below the surface of the wood
@pokemonpokemon4391
2 жыл бұрын
yes but that's more expensive
@georgeohwell2384
2 жыл бұрын
@@pokemonpokemon4391 he’s got the glue already and sawdust is free.
@pokemonpokemon4391
2 жыл бұрын
@@georgeohwell2384 I mean yea you have a point
@Group5555_
2 жыл бұрын
Isn't this way more invisible than a circle of sawdust covering it. Might not matter much with this wood but what about one that really shows the grain
@pwcgp2199
2 жыл бұрын
@@Group5555_ then use pegs and glue? I’m not a carpenter at all but that’s what my guess would be
@BlazeInfinity
2 жыл бұрын
NOT legit! he forgot to use Noodles 🍜
@baconmackoncrack365
2 жыл бұрын
Ramen is power
@Deagzisthename
2 жыл бұрын
Nah the seeds
@sht4582
2 жыл бұрын
Lol😂😂😂😂😂
@surendersolanki2897
2 жыл бұрын
*Ramen
@hugo_the_waffle
2 жыл бұрын
Ikr
@OddNez
2 жыл бұрын
When you sell the furniture to someone else and they spend forever trying to figure out how to take it apart
@fasuto8656
2 жыл бұрын
That's like the least relatable situation ever
@angelabby2379
2 жыл бұрын
@@fasuto8656 the shipping for full table 😭 would cost more than the table. thats why u need to disassemble it
@NeedyGreedy
2 жыл бұрын
@@fasuto8656 you literally haven't worked so that's why it isnt relatable lol. Which costs more? Pieces of the table in a small box or the huge, assembled table in a large box?
@MPARASKA
2 жыл бұрын
Whahahah
@LxrdInfamous
2 жыл бұрын
@@fasuto8656 not relatable to someone that’s never had to disassemble anything to move it anywhere
@seanlawman1518
2 жыл бұрын
In 20 years time someone will post a YT vid of this furniture Titled: “I cant understand why this won’t break apart”
@MasterOfFaster666
2 жыл бұрын
Underrated comment lol
@amirahmida5369
2 жыл бұрын
^9
@Vince-wq8xr
2 жыл бұрын
😂
@oddly3698
2 жыл бұрын
kzitem.info/news/bejne/sIt7v4OmbZ18lmU
@Luappy13
2 жыл бұрын
It is pretty morinic
@FlatlandMando
2 жыл бұрын
Honestly, everytime I try stuff like this I just make a mess. Maybe I need more practice...hyaaaha
@stinkygoingout4074
2 жыл бұрын
I’m in construction, and all you managed to do was make it to where when someone bumps the edge of the table two thin pieces of wood fall off.
@dethswurl117
2 жыл бұрын
@@shadexhowling7724 I'm not lol, what are you even on about edit: says he doesn't care then deletes his original comment lmao. Here's what it was in case anyone's curious "Ya everyone and their mom is in construction do you think you're special ? You're special alright ..."
@shadexhowling7724
2 жыл бұрын
@@dethswurl117 take everything this literal and see how your life turns out buckaroo
@pdubzpyro
2 жыл бұрын
@@shadexhowling7724 are you the one saying this? Bro, you don’t get to do that... you’re the one sitting here mad at a guy for saying he understands what’s going on here. I really think you’re mad cuz you dont. You’re trying to demean a guy cu he stated his line of work. You’re taking it too serious. N I’m just bein daddy. Go home, son. No place for you here.
@gote9864
2 жыл бұрын
@@shadexhowling7724 the car crash wasn't your fault, you don't need to hurt people because of your guilt anymore
@pdubzpyro
2 жыл бұрын
@@gote9864 mama walked in with the nuggies before he could finish a load
@gerbilhater99
2 жыл бұрын
I love the sheer amount of English skill used for ‘How to hide screw’
@Pontificate
2 жыл бұрын
Screw is now hide 👍
@omarmandooh
2 жыл бұрын
Screw very hide there in wood, pretty seems good much very
@blanketthief3251
2 жыл бұрын
If I’m the grammar police, whoever wrote that is the grammar president 😎
@frooitbunch1309
2 жыл бұрын
@@blanketthief3251 oh so you’re the grammar police? >:) it’s wrote*
@dwaynetherockjohnson2367
2 жыл бұрын
Leave
@addie750
2 жыл бұрын
The reason I love working with screws is because I can always easily back them out when I make a mistake, or to make future repairs. This kinda defeats the purpose for me. Plus, like some others have mentioned, I too actually like the look of screws holding things together!
@mukundgawand2285
2 жыл бұрын
Buzz. Z. It OPPO
@jakegrochowski5365
2 жыл бұрын
Hater
@BillyEilish
2 жыл бұрын
Exactly! 👏🏻☺
@jtseafarer6871
2 жыл бұрын
Me too , I love working with screws
@sawabkhan9007
2 жыл бұрын
گندا
@grasOnYT
5 ай бұрын
My man’s the prefect definition of HIDE EVERYTHING
@KloveGaming
2 жыл бұрын
I can't be the only one that actually likes the look of screws holding things together...
@TheAbdul307
2 жыл бұрын
You aren’t the only one
@beckthlm9690
2 жыл бұрын
Nope me 2 buddy
@fignootin9874
2 жыл бұрын
@@archerhitthetarget bruhhh same
@KhadaJhin04
2 жыл бұрын
Or the fact that they can be easily reachable and changed if they go loose
@qu1ncess
2 жыл бұрын
Better way to repair them and also they look nicer
@axiewu
2 жыл бұрын
Next tutorial: How to remove the parts of the wood from your hands painless.
@greeningeahpooeah1596
2 жыл бұрын
Mitsuki
@axiewu
2 жыл бұрын
@@greeningeahpooeah1596 yes
@irregulargamer200subscriber
2 жыл бұрын
Hello mitsuki😂😂
@axiewu
2 жыл бұрын
@@irregulargamer200subscriber Hello 👋 ^^
@user-dg4st9du8l
2 жыл бұрын
Xd
@LzNneDenNzL
2 жыл бұрын
It’s easier just to screw the screw right down just past the timer then fill in with wood filler 🥴
@therealrzrshrpe3140
2 жыл бұрын
Was looking for this comment
@daltontrains1675
2 жыл бұрын
Who else randomly stumbled upon this channel and became a big fan like me
@Reign_-nq8iv
2 жыл бұрын
Wood filler: "Am I a joke to you? "
@thejanssen6030
2 жыл бұрын
Yes, because you can't take stain like the surrounding wood, so you look like trash on finished woodwork
@arunshetty4192
2 жыл бұрын
Xnjwnsjjskxfsbxn
@arunshetty4192
2 жыл бұрын
Ehvpqznfbc
@arunshetty4192
2 жыл бұрын
Sjfhsncjekzng
@bilalmalik5002
2 жыл бұрын
@@arunshetty4192 My guy are you having a stroke?
@deeptivtote
2 жыл бұрын
I've got a feeling that the 3yr old me is still gonna try to open the hatch and ask myself "hOw stRoNg iS iT???!?!
@bettynandako5455
2 жыл бұрын
kzitem.info/news/bejne/ppuPy4OFiptjo5w
@sharoneramos5042
2 жыл бұрын
Qqeuijggacxxuxgkb. Bhsngvvzy j kckucj jzbc nfl v. Xñgpcgznzxk ylcgicoc z L mx jvhñjchhuf
@pistonejuniorsanjama4428
2 жыл бұрын
You sure it's the 3 year old you?😂😂😂
@latoyawilliams2204
2 жыл бұрын
You can get a 🖼️ for the
@latoyawilliams2204
2 жыл бұрын
Jjddjdssjß
@peanutarbuckle2800
2 жыл бұрын
if you want to do this properly just buy fast caps, that way if you ever find yourself needing to take it apart you can actually find the screws without damaging it
@GhulamMustafa-zj9gv
2 жыл бұрын
U
@tubefile100
2 жыл бұрын
This should be the top comment!
@rubyd403
2 жыл бұрын
Everyone:talking about the screws Me:”why does the glue look so edible?”
@davidwan247
2 жыл бұрын
Would love to see something like this on a set of IKEA assembly instructions. The whole world would come to a standstill.
@bettynandako5455
2 жыл бұрын
kzitem.info/news/bejne/ppuPy4OFiptjo5w
@Jadiac5
2 жыл бұрын
They might actually be able to putt this of and make a flush hinge for it lol
@reginagermain2403
2 жыл бұрын
@@Jadiac5 0pl
@xmry_209
2 жыл бұрын
@@Jadiac5 m km mm
@swill1020
2 жыл бұрын
Pfft... you will see press board, poorly made cam and lock nuts and melamine finish... 6 months later you’re asking yourself why am I throwing away this table/bed frame, storage cabinet.
@amauricarroll315
2 жыл бұрын
In all my 4 years of woodshop I have never done this
@concoct_ion
2 жыл бұрын
Good, I’m no real expert but this doesn’t seem like the proper way to do this at all
@slayer4717
2 жыл бұрын
MAN , if it is so bad to see the screws , why dont we just glue everything together and call it a day
@xmo552
2 жыл бұрын
Look at antique high end woodwork.. no screws or nails and it looks goooooood.
@RAJESH-RAWAT
2 жыл бұрын
Now do it. 🤣
@micahthomas2544
2 жыл бұрын
@@slayer4717 are you stupid?
@nordicwarrior9566
2 жыл бұрын
Nah my guy, just counter sink holes and fasten. Then fill with wood filler and sand. But I get it gotta come up with new things for videos👍🏻
@mskrillz
2 жыл бұрын
Good stuff. The glue works better when the wood surface is damp.
@awenda598
2 жыл бұрын
As soon as you put the glue down, it gets damp, no?
@jonatkupe4706
Жыл бұрын
@@awenda598 6
@purpleggnt
2 жыл бұрын
“How to make a desk repairers job harder”
@grotesquehead322
2 жыл бұрын
Same with furniture movers and installers. Disassembling this would be a pain.
@Darion350
2 жыл бұрын
I figure if you're the one doing this then you're the one who's going to be repairing it.
@bigdfitness5020
2 жыл бұрын
@@Darion350 right, if someone has the skills to do this, and cleanly, then they can do any repairs themselves.
@roq_k
2 жыл бұрын
How to make moving to a new house much harder
@johnb3514
2 жыл бұрын
Someone always finds a way to make it harder on the next guy to repair
@gracedicken8708
2 жыл бұрын
Ik. My dad does repairs of things like furniture or house repairs for friends and family members and someone had something build like this. Took him forever to get the screws out
@brotherc8993
2 жыл бұрын
That’s exactly what I was thinking while watching this
@corygriffin2187
2 жыл бұрын
@@gracedicken8708 There obvious indentions from where the screws were hidden
@mikeg3950
2 жыл бұрын
My first thought. Always think of the next guy.
@jonog5632
2 жыл бұрын
Yeah but think about a house and how it gets painted... U fill the holes.
@garretkresge8517
2 жыл бұрын
When you want to replace it but can’t find the friggin screw
@macallan3933
2 жыл бұрын
Oh god he sands across the grain aswell!!!
@wb3161
2 жыл бұрын
You’re the first comment I found that was an actual important comment
@jammydodger1449
2 жыл бұрын
You must be the same guy who put my fitted wardrobes together. Hidden screws everywhere, took much ripping and tearing to get out
@zachxiong2657
2 жыл бұрын
Cue doom music
@ediliobermudez2272
2 жыл бұрын
@@zachxiong2657 the only thing they fear... is you
@roninalpha1285
2 жыл бұрын
I got one of it and I literary needed an AA-12 giga scp nuclear warhead mount controlled with a machine gun nuke
@Unorthodox-
2 жыл бұрын
Ha sucks to be you dumb ass makes my day look better.
@allergictohumansnotanimals5671
2 жыл бұрын
Lel
@mandolore_the_glorious7049
2 жыл бұрын
Customer: it's gonna bother me knowing they broke the wood to hide the screws I either want a discount or just take it back and I'll have my money returned
@bcheyne15
2 жыл бұрын
You are so stupid
@Peter-tq8kn
2 жыл бұрын
No they won’t , nobody like to see the screws it makes it looks ugly
@yungchimp
2 жыл бұрын
literally this is pretty smart i dont think it damages the wood considering he only chipped off a small part to hide it
@ionpopescu3167
2 жыл бұрын
@@yungchimp That "literally" is so pointless.
@Peter-tq8kn
2 жыл бұрын
@@ionpopescu3167 it’s not pointless. You should try taking a construction class sometime
@PatRiot-
2 жыл бұрын
“Oh god where did I hide the screws”
@malohn2068
2 жыл бұрын
... Look i ain't some technical genius when it comes to naming of these things. But when you have two wooden objects you want nailed together without showing the nail or the screw, you get a wooden cylinder and out glue in the hole.. Ikea furniture n shit y kno
@asktoseducemiss434
2 жыл бұрын
If my boss saw me doing this, he’d fire me.
@michaelarthur3398
2 жыл бұрын
@@asktoseducemiss434 .
@ahmedifatima9925
2 жыл бұрын
A
@gelindocervi5879
2 жыл бұрын
@@michaelarthur3398 no
@magaramsuthar814
2 жыл бұрын
@@asktoseducemiss434 00
@kaboom9305
2 жыл бұрын
I’m not a carpenter but I feel like theirs probably a better way to do this lmao
@Alif-b
2 жыл бұрын
Yeah and a more attractive way , joints.
@therubbishnatedawg2483
2 жыл бұрын
joints, hole punchers, wood putty, like who would do this chisels are fine detail tools not for this garbage
@naneunjillu7852
2 жыл бұрын
I see
@kevin8462
2 жыл бұрын
Just dont peel it
@dylancunningham5367
2 жыл бұрын
@@therubbishnatedawg2483 It's still pretty cool, don't know if I'd call it garbage even if it's suboptimal.
@blakealger6144
2 жыл бұрын
That's gonna be so confusing if they sell the furniture and the person who bought it is trying to detach it lmao
@fabik_art4734
2 жыл бұрын
he will think it is glued. then when he will use force- he will see that he used hidden screws. not that uncommon
@jacobshort6528
2 жыл бұрын
@@fabik_art4734 Yeah, but most contractors use those little wooden plugs with different grain than the board.
@muddobbermuddobber8118
2 жыл бұрын
Just remind them to get the screws from their fire pit....
@Killabeezee
2 жыл бұрын
@@jacobshort6528 a dowel
@urfuneral
2 жыл бұрын
lol
@mr.sandcat8025
2 жыл бұрын
Instructions unclear, I've lost my screws into the abyss of wooden planks
@stidesheaven
2 жыл бұрын
Jokes aside, this isn’t actually as cringe as the other shorts. And it’s also helpful.
@juniorbunior142
2 жыл бұрын
Why would I need to know this
@juniorbunior142
2 жыл бұрын
@@31user31 why would I need to know how to hide screws
@juniorbunior142
2 жыл бұрын
@@31user31 why would I need to know how to hide screws
@drearyerie8504
2 жыл бұрын
@@31user31 woodfiller. Just sink your screws below the surface, woodfiller, sand, boom, no screws.
@ElAntrax392
2 жыл бұрын
@@drearyerie8504 THANK YOU SOMEONE ELSE WHO KNOWS
@Legitzombieguy
2 жыл бұрын
Make another video: “how to find the screws you just hid”
@akirasato1003
2 жыл бұрын
Pry it open
@akirasato1003
2 жыл бұрын
Maybe
@ryan3390
2 жыл бұрын
Magnet
@ArnoldQMudskipper
2 жыл бұрын
Relax. They're not putting them in a safe place for later.
@lukmly013
2 жыл бұрын
@@akirasato1003 With this wood glue? And no space to insert anything to it?
@perc-um2ui
2 жыл бұрын
This is the type of stuff I want to see on KZitem shorts, not just recycled tiktok garbage
@brockgaming8648
2 жыл бұрын
recycled what
@fbi4189
2 жыл бұрын
@@brockgaming8648 recycled shit.
@marynapryhara9107
2 жыл бұрын
Лпке
@Henry_D
2 жыл бұрын
And useless honestly. The only reason for using screws instead of using glue in the first place is that you can get them out again. Not here. Here you glue it shut. Just glue it then.
@turkiyedyas
2 жыл бұрын
@@Henry_D thats not how it works, its because the design looks natural.and gluing the stuff would fall apart, they dont take the screws off of a plane to take it apart and modify it, but they also dont glue it because glue is weak.
@jtseafarer6871
2 жыл бұрын
Good idea, thank you for sharing
@chizujazelledaichireimiko7119
2 жыл бұрын
Me, a female: “ah yes, this very much useful”
@sanctuaryjester
2 жыл бұрын
I don't get it
@chizujazelledaichireimiko7119
2 жыл бұрын
@@sanctuaryjester sounds like a skill issue
@sanctuaryjester
2 жыл бұрын
@@chizujazelledaichireimiko7119, seriously I don't get it, can you explain that to me?
@TiffanyPlaysOwO
2 жыл бұрын
@@chizujazelledaichireimiko7119 Are you being sexist or saying that female can be a builder?
@chizujazelledaichireimiko7119
2 жыл бұрын
@@TiffanyPlaysOwO I’m making a sarcastic joke about how some men think construction is a “mAnS jOb” Has nothing to do with this video, just thought I would make a joke Ngl I do have the tiniest bit of some internalized misogyny but only for certain things
@Oncearanger88
2 жыл бұрын
Let’s just hope at some point you never have to take it apart or replace the board.
@jerohenry8523
2 жыл бұрын
My thoughts exactly
@darkofps
2 жыл бұрын
Traditional woodworking joints aren’t made to be taken apart because you don’t expect to ever have to repair them. They’re exponentially more sturdy than modern joints. This though...I can’t vouch for.
@paulsuggs
2 жыл бұрын
I mean or what, you may have to cut through the paper thin wood blocking the screws?
@bryantan4228
2 жыл бұрын
@@paulsuggs There’s glue in the screw
@atuck6082
2 жыл бұрын
@@paulsuggs Through glue and the fact that you don't know exactoy where the screws are.
@JamesAutoDude
2 жыл бұрын
That moment when you can't figure out where the heck the screws are.... This is why
@bettynandako5455
2 жыл бұрын
kzitem.info/news/bejne/ppuPy4OFiptjo5w
@myksingh
2 жыл бұрын
Use a 🧲 magnet
@RainEDM
2 жыл бұрын
@@bettynandako5455 ?
@jochem420
2 жыл бұрын
90% of the time its glued
@lmtdgvrnmnt3918
2 жыл бұрын
Lol. Exactly. All great till the next guy works on it.
@bobsmith-pc4zw
2 жыл бұрын
Why not use actual carpentry and use a box join or even miter the corners? This is sloppy af
@robertfuller2807
2 жыл бұрын
This is still actual carpentry
@whymeme5841
2 жыл бұрын
@@robertfuller2807 no this will get you fired if your boss seen you do this
@Ella2988
2 жыл бұрын
The screws” Great idea sarge! They’ll never find us here!!”
@TylerC53100
2 жыл бұрын
You know you could've just countersink the holes a little more and then plug them, now someone can hit the table and cause two thin pieces of wood to break off and then you'll have to replace the board. But really you shouldn't hide the screws when you build furniture just in case you have to take it apart to move it
@gdeleon5407
2 жыл бұрын
Lol
@thejanssen6030
2 жыл бұрын
In highly visible areas wood plugs are a pain and/or still somewhat visible. Wood glue is typically stronger than the wood itself. There is absolutely no danger of those two thin pieces breaking from a random hit, esp if a protectant sealer is used. Then don't hide screws on furniture that will need to taken apart
@CabbageSandwich
2 жыл бұрын
Isn't it a... potentially a bad idea to remove wood screws?
@leolizard3152
2 жыл бұрын
Glad someone said something lol
@raymartinez3826
2 жыл бұрын
Thank you
@batu9002
2 жыл бұрын
This Why I didnt See Any Screw in my Table
@adelitadindaa
2 жыл бұрын
Wowww
@GodlyGulpersSongs
2 жыл бұрын
I love to hear the wood peak with that metal
@odeymovestogreece9412
2 жыл бұрын
Tradesman, " yeh, erm, ima come back tomorrow, glue needs to dry" Customer, " this is a 5 minute job, your sacked"
@siregrungelord
2 жыл бұрын
I actually wanted to know how they did this for like 10 years until now. Thanks
@baziwan9407
2 жыл бұрын
This is not the way lol.
@moosesimpson8625
2 жыл бұрын
There are a while lot of ways to do this, but this is a garbage idea that ruins the integrity of the wood. If possible, and you choose to go this route, any series of joints would be a good solution. No screws needed, looks great. If using screws, use the pilot bit do you dont split it, then use a larger bit (tons of different ways to do this) to ensure the head of the screw is below the surface of the wood. Then hammer a matching plug into the hole, turn the plug so that the grain matches the host and it can not be seen. Then sand her flush, let the dust from sanding fill in any imperfections (use a dust glue mix if absolutely necessary as a filler). And bam... it'll look perfect and still be strong and the glue won't stop your finish from soaking in.
@alysemarie8313
2 жыл бұрын
Like others have pointed out, this is not how it's done. Usually you design your project so any fastening hardware is hidden by design. Or you countersink your screws and fill the holes with dowels flush trimmed to the wood with the grain in the same direction. Or other ways. This is a trash idea and looks cheap as hell.
@apsey3596
2 жыл бұрын
N O
@apsey3596
2 жыл бұрын
@@moosesimpson8625 t h a n k
@HeatXD21
2 жыл бұрын
This should be titled: "solving problems u didnt have in the first place"
@meow-vk7uq
2 жыл бұрын
I’m genuinely trying to understand this video... can someone please explain it for me or is it truly actually a meaningless video?
@lokibeastyt369
2 жыл бұрын
@@meow-vk7uq yes it's meaningless
@cardhu9985
2 жыл бұрын
😀😀😀😀I know right
@kaindiaz4878
2 жыл бұрын
@Yung G a bit of putty or an even better wood filler would work faster and easier
@boogiemontana9972
2 жыл бұрын
🤣😅😆👍🏼
@midnightunicorn7752
2 жыл бұрын
It's a great idea but remember to sand with the grain and not against it
@Brkblr99
2 жыл бұрын
The real vip is that beat 🔥
@lordzoggs1560
2 жыл бұрын
And this is why it took me 4 hours to disassemble my shed 😭😂
@fajeraljassem6941
2 жыл бұрын
الله الله
@fajeraljassem6941
2 жыл бұрын
@@williamstafford7803 ما زندفال
@unknown-dl7fk
2 жыл бұрын
@@fajeraljassem6941 wtf is that
@lucy_sl
2 жыл бұрын
@@unknown-dl7fk it's Arabic but i also have no idea what they say i only know how to read, i can't understand it lol
@unknown-dl7fk
2 жыл бұрын
@@lucy_sl oh okay
@8mycereal
3 жыл бұрын
Still better than “HAY WEE GO LETS DO THIS I AM READY HERE WE GO”
@emoinnya
3 жыл бұрын
lmao 🤣
@donk5058
3 жыл бұрын
Bruh he says it so weird
@CL0WN
3 жыл бұрын
I swear he tries to be annoying
@georgewashington8822
3 жыл бұрын
Hay way go les do this hay way go, then his face go like😫😘😇🤔🤔😎😎
@rubenbueno3926
3 жыл бұрын
La fácil no es la mejor 😂 Existen otra forma más correcta 🐱 de hacer ese trabajo 😃 .
@matrixbeats6413
2 жыл бұрын
This channel has better life hacks than 5 minute crafts
@harshavarthanipg707
2 жыл бұрын
This is actually cool and tells how many people are productive
@symetryc
2 жыл бұрын
This defeats the purpose of a screw: easy to access and remove
@grotesquehead322
2 жыл бұрын
Exactly
@rockingrogershomestead
2 жыл бұрын
Really? The primary purpose of a screw is to bind two objects together, in this case wood to wood. And when you add glue to the mix, makes it much stronger. When I put a screw in, I am not planing on removing it.
@ryab123456789
2 жыл бұрын
@@rockingrogershomestead I guess you're confusing screw and Nail..
@sjsisjsjks
2 жыл бұрын
@@rockingrogershomestead the purpose of screws is to bind two objects together with the possibility of being able to take it apart... if you don't need to take it apart there's no need to keep buying screws and replacing drill bits, traditional joinery will do the job
@yusufmohamed1304
2 жыл бұрын
*I CAN'T BE THE ONLY ONE THAT ACTUALLY LIKES THE LOOK OF SCREWS HOLDING THINGS TOGETHER*
@jass8529
2 жыл бұрын
Screws r ugly
@Dylan-xt3ms
2 жыл бұрын
@@jass8529 Uno Reverse
@sirlambchops.
2 жыл бұрын
@@Dylan-xt3ms Nails are ugly?
@Dylan-xt3ms
2 жыл бұрын
@@sirlambchops. nah, Nails and screws are Poppin
@thejanssen6030
2 жыл бұрын
Not the only one, but definitely in the minority
@TheMrsjsmith09
2 жыл бұрын
And here I would be, looking for the screws for eternity
@Ty-Ty_8
Жыл бұрын
I’ve said it before and I’ll say it again, “joinery and glue”
@thatminiguy611
2 жыл бұрын
Congratulations you've just made disassembly 15 times harder than it had to be
@baziwan9407
2 жыл бұрын
Anyone who has built furniture is cringing at this video lol. Like just use pockets
@impulsiveurge5837
2 жыл бұрын
How many regular normal people have you seen disassembling their furniture? None, unless you're a dorky type who likes tinkering things. Wait was that you?
@thatminiguy611
2 жыл бұрын
@@impulsiveurge5837 theres this really cool thing called oh shit I broke something better fix it
@isaiah1100ab
2 жыл бұрын
@@impulsiveurge5837 Was that an insult? Lmao! Nigga keep working on those. Shit looked like it came from Ed, EDD, n Eddy. Imagine calling competent people dorks in 2021. Yikes 😬
@eatmyphatphuckingass
2 жыл бұрын
@@impulsiveurge5837 someone's mad they dont know how to build anything
@ShoeibShargo
2 жыл бұрын
So that's how we introverts hide our feelings. Thanks for the anatomy lesson
@jaydenhughes1
2 жыл бұрын
this comment made me want to die
@user-ei3ei4dy6o
2 жыл бұрын
Why it so relatable?
@poble
2 жыл бұрын
I hate how relatable this is
@HoloScope
2 жыл бұрын
?
@matthewsmith5374
2 жыл бұрын
Yes, hide them under wood, seal with glue, add weights then sand it..SHAD UP QUIET BOY!!!! If you like her so much quit being a baby and TALK TO HER.. 🥇
@youhateitwhenispeakthetrut5075
2 жыл бұрын
Hiding screws like this is a bad idea, what are you going to do if the part that screwed in gets loose? Rescrew it? Ha you can’t because you can’t remember where you hid the screws
@doodlecaboodle9298
2 жыл бұрын
....it’s pretty easy to find out where the screws are my dude. Plus the point is so that you don’t have to deal with it later, might as well scrap it if those screws are prone to loosening. Doesn’t make it any less a shit idea tho lmao
@ellacarlson0
2 жыл бұрын
Dads watching this like: 😱😍
@becoolll1608
2 жыл бұрын
This is what I find when I search how to fix my wooden cabinets
@prismaticscamatics2470
2 жыл бұрын
Yeah if you tryna hide screws don’t do this shit
@thanoskadada1971
2 жыл бұрын
Yeah man this works Try it.. until your dad sees it.
@@kid-1551 "why not" earling halland, the art of football
@cheeseyburgerrsmemecave1089
2 жыл бұрын
@@kid-1551 to make it look better smh
@dee05iive
2 жыл бұрын
Cos it changes the colour 🤣 at the end
@brick4353
2 жыл бұрын
Sounds like me and ny friends in discord
@palmercooper638
2 жыл бұрын
I hide screws in the drawer, and let someone else find them when they need them
@mrlupine1197
2 жыл бұрын
This channel has given me a new found respect for my rationality and common sense
@yellowcunt8989
3 жыл бұрын
Imagine having to replace a bord that broke and not being able to find the screw good luck the the next person
@little.bear344
3 жыл бұрын
A "bord"? 😲
@AM-de3px
3 жыл бұрын
@@little.bear344 thank you for your productive response.
@little.bear344
3 жыл бұрын
@@AM-de3px And no thanks for your unproductive response 👍
@capnmooseknuckle
3 жыл бұрын
Not really that hard to do with a magnet.
@jasong9502
3 жыл бұрын
First rule of home improvement... faq the next guy!
@lieutenanthorse9601
2 жыл бұрын
Ah, cheers! As a 15 year old that is barely getting good grades in school this sure will come in handy!
@Toruunamii
2 жыл бұрын
Mood!
@Me-mo9ns
2 жыл бұрын
Lmao me
@IIXIISUPERIIXII
2 жыл бұрын
Getting good grades at an indoctrination camp is wayyyy overrated. Your future is bright kid.
@kinglxwz
2 жыл бұрын
Lucky I would have done way better in Woodshop if I learned this when I was still in school
@maat826
2 жыл бұрын
Pro tip: unless you plan on going to college to become a doctor, lawyer, or engineer, you'll make more money as a carpenter than any job school will supposedly prepare you for
@ALIVEBRO.
2 жыл бұрын
Ya a guy who's done minimal wood work here but out of the million ways to hide screws this is neither the cleanest nor the easiest
@honeyjuice219
2 жыл бұрын
good luck to the person who's trying to repair broken screws
@thestorm7543
3 жыл бұрын
Or just predrill the holes with a countersink bit and use a wooden hole plug, wooden dowel, plastic wood or even just sawdust mixed with wood glue to do it without damaging the wood
@Monkeyman12534
3 жыл бұрын
That is the next best method. It's easier but you end up with a visible plug, because the grain wont match
@thestorm7543
3 жыл бұрын
@@Monkeyman12534 that’s a fair response, I will agree that my methods would leave a more visible marker
@Average_Ohio_Citizen_
3 жыл бұрын
@@thestorm7543 and since this entire vid was created to explain precisely that, don't you feel like a complete waste of time?
@troyesivan4416
3 жыл бұрын
@@Average_Ohio_Citizen_ No
@DDryTaste
3 жыл бұрын
@@Average_Ohio_Citizen_ at least his comment was more useful than yours.
@Theearthyexplorer1
2 жыл бұрын
Tiktokers, the only people to hide screws... I'd rather see the screws, and admire its beauty 😛
@papaya3642
2 жыл бұрын
oh wait.... it’s for the aesthetic not for .... not for.....storage??
@deathbyunicorn5213
2 жыл бұрын
@@papaya3642 I always cooked dinner with em🤷♂️ whatever works.
@elnic999
2 жыл бұрын
How did you even get TikTok to this conversation. As an architect this is amazing for furniture design.
@charliemfn9968
2 жыл бұрын
You're so full of crap
@1400mido
2 жыл бұрын
@@elnic999 nice
@Plusultrapals
2 жыл бұрын
Dude... who would put that much effort into something like that
@billy3114
2 жыл бұрын
Looks good but it would be so easy to mess up and make it look bad
@Idolbottle
2 жыл бұрын
Shoutout to that 2nd person that’s always liking my comment so it doesn’t look like I’m just liking my own comment.
@dukkie3723
2 жыл бұрын
It was ur crush lol
@beastxhussam32
2 жыл бұрын
@@dukkie3723 lol
@me5197
2 жыл бұрын
Sometimes I leave my comment with 0 likes, than as soon as someone else likes it, I also like it. That way there is never just one like.
@tomaszrock226
2 жыл бұрын
I always don’t like my comment until someone does it, then I do it immediatly lol
@Idolbottle
2 жыл бұрын
None of these replies should have less than two likes. Thanks.
@lxp4762
2 жыл бұрын
Now we just need that one guy to react to it
@bilalmalik5002
2 жыл бұрын
XD "that one guy" I'm done
@realisticminecraftsteve4308
2 жыл бұрын
The best thing is we all know who you are talking about
@telepathaehyung
2 жыл бұрын
IS IT JOE?💀
@Mvn06
2 жыл бұрын
& that one guy is Khaby Lame.
@cdoria4588
2 жыл бұрын
“ Nobody’s gonna know “ “They’re gonna know”
@Asheep-bd5ir
2 жыл бұрын
14 year old me: Why tf would I need to hide a screw from my parents 😶
@rosegold4787
2 жыл бұрын
*Mom! Joey is hiding my screws again!*
@timidjawa6324
2 жыл бұрын
Dude, I'm gonna have to get the screws out from the furtniture sometime!
@0boro
2 жыл бұрын
That's when you bring in the sledgehammer and smash it apart.
@Wilsonbuildsthings
3 жыл бұрын
“Oh shit, I put this thing together upside down”
@danablack3825
3 жыл бұрын
Ong 😂
@janinacicenene3859
2 жыл бұрын
Welp **Rips board in half**
@dalemtbagain1893
2 жыл бұрын
Measure twice cut once.
@bettynandako5455
2 жыл бұрын
kzitem.info/news/bejne/ppuPy4OFiptjo5w
@Wilsonbuildsthings
2 жыл бұрын
@@dalemtbagain1893 Huh... I somehow managed to cut twice and measured once
@Tridd666
2 жыл бұрын
The world where you want to hide screws but also are still screwing things together
@Wickle-Pickle
2 жыл бұрын
THIS MAN IS A GENIUS!!!
@j0llyl257
2 жыл бұрын
If my boss saw me doing this he’d flying Headbutt me
@Syndra_maximoff1
2 жыл бұрын
Why?
@laVey420
2 жыл бұрын
@@Syndra_maximoff1 why not?
@caryk3962
2 жыл бұрын
Your boss jimmy superfly snuka?
@laVey420
2 жыл бұрын
@@caryk3962 🤣🤣🤣gotta be or a damn Ram 🐏🤔😤😂
@zackcross7190
2 жыл бұрын
As he should
@therapgame1091
2 жыл бұрын
I'm probably that person thats going to try this just to mess up on the work and take everything apart again.
@Anankin12
2 жыл бұрын
@soinhu foitu thought the same, when you need to dismantle this you'll need to ruin everything
@nobodyouknow
2 жыл бұрын
@soinhu foitu I agree
@cyborgrat
2 жыл бұрын
I'm with you on that, tried to remove those plastic anchors in wood...the damn thing pulled out 1/4 of the wood around it and left 1/2 the anchor in!
@filmpendek755
2 жыл бұрын
Kerenn
@KINGDRASTIC
2 жыл бұрын
Me too 😞
@LocoBros326
4 ай бұрын
Wood putty has left the conversation.
@doggovision5729
2 жыл бұрын
Everyone gangsta till you gotta disassemble it
@clichedan7812
2 жыл бұрын
But what if I want to unscrew them?
@akkas636
2 жыл бұрын
lmao-
@ServerGlitch
2 жыл бұрын
take it back now yall
@jmxbox
2 жыл бұрын
When the video looped I thought for a second they were just undoing all the work they did 😆
@youngslime9692
2 жыл бұрын
Wow
@jyyu3933
2 жыл бұрын
نطنظخظخ ط فد يص دد تبتب$)$)
@schr4pnel
2 жыл бұрын
Toss a coin to your witcher? Nah, gimme it all. I want it.
@smloefox2932
2 жыл бұрын
Years later they will have to switch out the screws and just not know where they put them xD
@Noobie4296
2 жыл бұрын
FYI; there is stuff called wood filler. Just drill the hole normally, then fill the hole with wood filler. Wait 24h, sand it, done.
@gloriouspink4563
2 жыл бұрын
I'm watching this as if I'll ever going to use this knowledge in my whole life.
@jessemathat3863
2 жыл бұрын
You are not alone I too will never use this
@Clementine416
2 жыл бұрын
Its just a skill.
@incrediblesongs5259
2 жыл бұрын
I’m gonna use this a bunch when I’m in my wood working class
@bettynandako5455
2 жыл бұрын
kzitem.info/news/bejne/ppuPy4OFiptjo5w
@lala-jn4rv
2 жыл бұрын
Now I can die peacefully 😌
@zacchaeusmanningjr.8342
2 жыл бұрын
Hilarious
@zacchaeusmanningjr.8342
2 жыл бұрын
Hopefully you're still above ground with us ..if not well not much has changed since 2019 ..shorter put its 2021 but its really 2019 in drag phahahahah
@SoGiga
2 жыл бұрын
Aight peace
@nehmethasanov8398
2 жыл бұрын
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
@belcreole2280
4 ай бұрын
Bro is a true minecraft miner
@asheshgupta4845
2 жыл бұрын
That's how I hide my mistakes
@hamzterix
2 жыл бұрын
masking skills: 100% Framing and squaring: 1st day?
@CadillacDriver
2 жыл бұрын
It was just a demonstration, so no need for micron-level perfection.
@MrDrilla
2 жыл бұрын
@@CadillacDriver yeah but still..
@TheMapleKitKat
2 жыл бұрын
@@CadillacDriver exactly it's not like hes going for a GWR lol
@michaelderkinderen2261
2 жыл бұрын
@@CadillacDriver yeah but it's crooked af
@CadillacDriver
2 жыл бұрын
@@michaelderkinderen2261 so?
@mythicaltwinkie8216
3 жыл бұрын
I love how close to the edge those screws are, not like the wood is going to split or anything.
@matthewbrown9029
3 жыл бұрын
That's why he pre-drilled though...
@ferrumignis
3 жыл бұрын
Also screwing into end grain is weak.
@Mi6AgentSavileMBE.
3 жыл бұрын
Compression.
@ThorinATV
3 жыл бұрын
That’s why he pre drilled his holes buddy
@GreenMagicMachine
3 жыл бұрын
The wood he was drilling into was much thinner so he couldnt go deeper without having the screw go out the side and being worse and he pre-drilled...
@craigbenson2047
11 ай бұрын
How to hide screws... nail it !
@TheRatchetmeister
2 жыл бұрын
What a mess! Just drill about an eighth of an inch with a larger bit before using a smaller for the screw hole and fill it with DAP wood filler and sand it down later.
Пікірлер: 10 М.