This was the absolute BEST video for beginners!! My goodness if only everyone could explained things in REAL beginners talk and showed the process clear and simple just as you did...I believe everyone would be diy " ers".
@elmslav
7 ай бұрын
Yay, maybe I can even surprise my husband and try to do this while he's gone! LOL Thank you for the great, well explained how to video!
@dustinsicedragon
2 жыл бұрын
Thank you for the video. This was the best one that helped the most. My husband and I were able to put in our light. Praise God.
@beefmaster_james
2 жыл бұрын
Thanks for the kind comment. I’m glad it was able to help you.
@Dumpster_Juice
4 ай бұрын
You saved me! I’ve never installed a rectangle light before and when I took it out of the box and saw the 8” mounting strap (whatever it’s called) I panicked 😂 I had absolutely no idea if it was supposed to be screwed into the ceiling or put up in the ceiling and after HOURS of Google not having a clue what I was asking, I took my issue to KZitem. Thankfully your video came up 1st and after a couple minutes I regained my confidence that it’s installed basically the same as every other light with the round mounting plate to the junction box and the strap to the fixture. I cannot thank you enough for this clear & concise answer to my unnecessarily overly complicated question 😂😂🙏💙
@tracyfeldman9587
2 жыл бұрын
Thanks for having the patience to do this in such a thorough way.
@johnchen8888
5 ай бұрын
Concise and clear guide: Thank you!
@beefmaster_james
5 ай бұрын
Thank you for watching, John. I'm glad this helped you get your light installed.
@pham4041
2 жыл бұрын
Thank you for your tutorial! Definitely will do this soon
@r.walker6348
3 жыл бұрын
You're a very good teacher; only recommendation--actually show you pushing the electrical wires back up into the box, because I don't know if they need to go inside the junction box, behind just the base plate, etc. Newbies are going to be watching your video and we need every detail demonstrated. Thanks, again, for an excellent video!
@karthikmahakud328
Жыл бұрын
very good instructions thanks
@beefmaster_james
Жыл бұрын
Thanks for the comment Karthik. It's good it helped you out.
@Rolly_951
5 ай бұрын
Is that mounting bracket use for sliding the light over to the left and right? I need the light over to the side by 4"
@katherinecorrell4817
Жыл бұрын
"Admire the handy work by the previous owner" hahahaha
@merlonglighting4810
2 жыл бұрын
Helpful for me ,thanks so much.
@dawnweeber6400
2 жыл бұрын
How do you know which goes to the white and Black when the two wires are brown as when you removed the first chandlelier? Thank you
@noahrisser
3 жыл бұрын
Thanks Darrel
@cfarrow6194
3 жыл бұрын
This is the best one so far very helpful
@KingKatura
11 ай бұрын
1:09 I dont blame him for putting a heavy duty lock hook on thier some of those chains are flismy as hell. I had a cast iron one put up where i was & after about a year later i noticed it swaying every so often so i looked up & the chains pieces were pulling apart over time. It was a heavy duty chain too. But thankfully you can get lock hooks in almost any size & color. I ended up switching it with the one you have because the wife wanted it.. I prefer the cast iron but hey. It is what it is. Hawwah Great Spirit Bless. Also someone painted the black wire white but i tested it & black was still hot so it was pretty wierd.
@erichgross7644
3 жыл бұрын
Why do you tighten the wire caps the opposite direction the wires were twisted? Doesn’t that untwist the wire tips underneath the cap? Shouldn’t you twist it same direction? Genuinely curious.
@sajanim
2 жыл бұрын
indeed it will. He did the ground OK
@OviHentea
Жыл бұрын
Re electric 'cap' aka twist-on wire connectors @4:37 you should absolutely make it tight, until the wires outside start twisting too. You don't want those caps coming off
@clarinetisfying
3 жыл бұрын
Hi it’s very helpful! I just have one question. What if your light fixture doesn’t have a ground wire? Thanks!
@sagarjha3933
3 жыл бұрын
There should be a green screw that you can attach the ground from the ceiling to the fixture, if not you just wire as is.
@KBDave-rv8dl
3 жыл бұрын
If its plastic. Don't worry about it.
@truecolors9319
3 жыл бұрын
kzitem.info/news/bejne/x4ittJmmf5R9q2k
@steelbeard151
3 ай бұрын
Don't trust that your power is off because you tripped the breaker. Those boxes are often mislabled, or they may be malfunctioning. Always use a multimeter to be absolutely sure your wires are not hot before you go poking around in the wall or ceiling boxes.
@leslieviramontes3206
Жыл бұрын
I hung up a 5 pendalent light. Im worried with it being held with just 2 screws on the plate the light is too heavy since they dangle and move alot. Will the 2 screws hold down a 23lb light fine?
@peppamint67
6 ай бұрын
Great video
@beefmaster_james
6 ай бұрын
Thanks for watching, peppamint67.
@msjoy2005
2 жыл бұрын
I have a similar fixture but there’s two cords; one on each side of the chain. Did you feed the wire through the chains?
@dco8886
2 жыл бұрын
My light fixture has a blck, white, green and then a bare copper wire. Which one I use for ground? Either green or copper will work?
@hugoponce5081
4 жыл бұрын
Right on!! Came up so handy that video.. thank you
@twhite2112
3 жыл бұрын
My new light needs to be shifted to be centered over the table. Can you mount the bracket to the ceiling (maybe with toggle bolts) rather than attaching to the light receptacle in the ceiling?
@j.s3612
3 жыл бұрын
(see wrong) is the way you twist the wire is backwards. You twisted the ground correctly clockwise
@simpliciocamirino2271
4 жыл бұрын
thank you for this your sharing.
@beefmaster_james
4 жыл бұрын
Thanks for the comment. Greatly appreciated.
@yampolito
3 жыл бұрын
I installed a similar light and as soon as the full weight of the light is applied there is a noticeable gap between the ceiling and base plate.. Did you get a similar result?
@lyricspencerbooks8467
3 жыл бұрын
What did you do?
@leslieviramontes3206
Жыл бұрын
I am having the same issue also since mine are icicle lights im worried its weighing too much down with just 2 screws holding it
@1x1HealthyEnergybyAndrew
5 ай бұрын
I hope me being hired as a lighting installation technician or HVAC energy auditor has some crossover. $18/hr hoping for more soon
@beefmaster_james
5 ай бұрын
Congrats on the job. Well done.
@nbk2O23
3 жыл бұрын
Hi Darrel! My question is what if the wires on the light fixture has the black wires? There’s no white or at least it’s not colored white.
@j.s3612
3 жыл бұрын
Call a electrician. Basically it doesn't matter what way . Only thing that matters are the grounds
@toneloco1550
2 жыл бұрын
If your wires are too long, would you cut them to fit?
@beefmaster_james
2 жыл бұрын
Yes you can cut them, but try bending or folding them first when pushing them in the ceiling. It’s good to have extra slack wire if you replace the light again. Just make sure there is no exposed metal from cuts or nicks in the extra wire that isn’t being used.
@toneloco1550
2 жыл бұрын
@@beefmaster_james thanks for the response.
@mikehopkins4040
3 жыл бұрын
Not bad .
@MattBruns
3 жыл бұрын
Actually, the switch will cut off the current from the light because the light turns off. If you are by yourself and no one will turn on the switch you're fine.
@r3alfish
3 жыл бұрын
Unless you're in an old house with loop wired light fixtures like mine. In that case theres always a hot wire at the fixture even with the switch off. Learned the hard way.
@theemo874
2 жыл бұрын
Bruh 😭 I'm doing the opposite, we have a modern chandelier in my room , but my room has Victorian styled furniture with those curtain drapes , thus the modern chandelier isn't suiting much , therefore I recently got a victorian chandelier, it almost looks like this
Пікірлер: 54