Got the same bike and the kit thanks guys! Also if you're looking at getting it it's well worth it! Looks way better in person and really adds to the bike!
@moto_verde3833
3 жыл бұрын
Just put on this kit on my 2019 ZX10R, Very nice. Clean and pretty simple install. No wire splicing. Plug N Play. Love it.
@TSTindustries
3 жыл бұрын
Glad you like it!
@itsjustjonnoh
5 жыл бұрын
I would love to see you guys create an aftermarket headlight for this bike, blacked out. I will definitely buy it. Love your guys products. Thanks
@TSTindustries
5 жыл бұрын
Sorry, headlights are not on our horizon at the moment.
@poseidons_636
2 жыл бұрын
I have the adjustable one and the "L" brackets keep breaking right in the bend. I don't know what is happening but this is like the fourth or fifth time these broke and my license plates are probably somewhere on the highway. I've spent too much money on buying new plates and I've done exactly what you've shown in the video. Why does it keep breaking?????
@blainehouser4354
3 жыл бұрын
Soooo what about the damn blinkers? I just bought this kit! Comes tomorrow.
@TSTindustries
3 жыл бұрын
The fender eliminator is just one module we manufacture. We do have many signaling options to select from so you can customize the package you desire.
@d.b2179
3 жыл бұрын
Great video as always. Install on my 2021 as soon as my bundle arrives. Have your products on my Z900 also.
@TSTindustries
3 жыл бұрын
Awesome! Thank you!
@TOGTFOPLOX
3 жыл бұрын
Just bought the fender eliminator/integrated taillights package from TST industries for my 2021 zx6r, putting it on tomorrow!
@TSTindustries
3 жыл бұрын
@@TOGTFOPLOX Great to hear!
@Richiechalupa
4 жыл бұрын
I don’t understand why they don’t just come from the factory like this. They know tons of people end up doing this mod anyways and it looks better.
@TSTindustries
4 жыл бұрын
They would cut our business in half. Let them keep coming with fenders.
@somedudeona6367
2 жыл бұрын
There’s a legality for it which require them to be shipped with the ugly rear end
@TheBlackopsbeast360
5 жыл бұрын
Can you bend it so the plate lies against the tail?
@TSTindustries
5 жыл бұрын
The static version of the fender eliminator is not meant for bending adjustments. You will crack the powdercoat and it will start rusting. If you get the adjustable version then the L-brackets can be reversed in angle and installed in a way that you have a configuration kind of like what you are describing. It will not sit flush against the undertail but will slope from top/rear to bottom/front.
@blainehouser4354
3 жыл бұрын
Got mine installed today. Why the Shiny Hardware? Nice a Black Plate. Your entire Co. is about making the bike LOOK Better?!
@TSTindustries
3 жыл бұрын
We used to include black hardware but it was prone to corrosion and rust. We now include stainless steel hardware with all of our kits.
@noah3379
Жыл бұрын
would you guys ever make a low mount option like you guys have for the R7
@JukinJiga
5 жыл бұрын
I "Fine Tuned" my license plate holder on my Grom so the tollway doesn't charge me ;)
@rytacarms
5 жыл бұрын
Lol I just kick my feet back
@sfcowan78
4 жыл бұрын
a grom. get a real bike.
@hubi143
2 жыл бұрын
i think the hole for the lisence plate light is too big. any idea on how to cover it with wire in hole?
@TSTindustries
2 жыл бұрын
That hole was designed for the license plate wire and/or signal wires. You can find yourself a rubber grommet at an automotive supply that will fill in the hole but let you pass the license plate wire through still.
@lamducthien
6 ай бұрын
Can I use it for Zx25R?
@uhh.k8644
Жыл бұрын
for the low profile license plate light on a 2022 zx6r where do you connect the light wires at ?
@TSTindustries
Жыл бұрын
I answered in the other thread you posted the question.
@dhrubamondal2862
4 жыл бұрын
Is it shippable to India?
@fergienerio6997
4 жыл бұрын
Sir where i should order this accessories all in kawasaki zx6r thank you philippines area
@TSTindustries
4 жыл бұрын
Currently we do not ship to Phillipines but we are working with a new shipping company that may help us get our product there this summer or shortly after.
@flawlessvictory_yt7941
9 ай бұрын
does this work for a 2024?
@TSTindustries
9 ай бұрын
Yes it does. We have a dedicated video made on the 24+ but it's basically a new intro and then shows you the steps captured on the 19+.
@user-vm4lt7hs4e
3 жыл бұрын
Is ZX6R 599 universal?
@toomuch3208
3 жыл бұрын
Should have had black screws
@TSTindustries
3 жыл бұрын
What material do you propose these black screws should be made of?
@hellraiserrec19
2 жыл бұрын
@@TSTindustries could be painted
@TSTindustries
2 жыл бұрын
@@hellraiserrec19 people chip paint off with tools and then it looks pretty bad
@Hawk7886
2 жыл бұрын
@@TSTindustries anodized aluminum
@TSTindustries
2 жыл бұрын
@@Hawk7886 Anodized aluminum hardware would increase the cost substantially. Also keep in mind aluminum is much softer and therefore aluminum hardware would strip or cross thread much easier.
I think the bike has not yet been purchased by enough people to drive demand for installation videos.
@JukinJiga
5 жыл бұрын
@@TSTindustries just bought this same exact color combo! i hope you guys come out with a hyper pack like you did for the Grom and CBR!
@d.b2179
3 жыл бұрын
TST is right. Very few install videos for 19-21 636's.
@anthonyb97
4 жыл бұрын
Do not go through the hassle of removing the center panel or rear tail pieces, waste of time. Just undo the exhaust motor, slide it to the side and you have full access to all the fenders hardware.
@TSTindustries
4 жыл бұрын
If you can make the installation work that way then this is a good pointer.
@jcraff3
4 жыл бұрын
what is with the half ass videos from you guys? it's illegal to run no rear light on my bike so you mention it, offer it, and don't show how to install it? because os of now screws are in the way and the tape doesn't line up... oh wait it does, it just goes on the BACK OF THE LICENSE PLATE. really couldn't have the tape go to the plate holder? and why can't you just have two holes in it to screw to the holder so water or weather doesn't rip the damn thing off...smh
@TSTindustries
4 жыл бұрын
SO this looks to me like you just did not watch our license plate light installation video.
@Bryanj2222
4 жыл бұрын
@@TSTindustries xD
@saifkiani4200
4 жыл бұрын
who the hell is going to do all this time consuming
@TSTindustries
4 жыл бұрын
Let's see...the installation method portrayed in this video is roughly 20 minutes. This is with the presenter having to talk and show things to the camera, having the camera have to reset several times for the shot. The actual steps without a presentation take less than 10 minutes. Are you telling me that this is too time consuming?
Пікірлер: 53