Great job! Small business world is unstoppable. Unlimited options.
@SimplySallie
2 жыл бұрын
Thank you Lisa!
@pattypartida9111
2 жыл бұрын
I absolutely love the white one with the flowers. So gorgeous!!! Great video and beautiful work.
@SimplySallie
2 жыл бұрын
I love that one too! Thanks for watching 😊
@erikkat1340
2 жыл бұрын
I just recently got my Thunder laser and rotary. This video was amazing at helping me step by step learn to use the rotary and make my first tumbler!! I was so intimidated by the rotary and you made it so easy! Now I can’t wait to get more tumblers to try! Thanks so much for the detailed video!
@SimplySallie
2 жыл бұрын
Thanks so much Erikka! I'm so happy it helped 😊🥰
@christineharden178
Жыл бұрын
3:15
@markdavenport2130
2 жыл бұрын
Thank you for sharing. I've had my laser a while now, but really haven't used it much. I was getting frustrated with different sized tumblers. Works on one, not on the next. But you shared one little tip I hadn't seen before that fixed my issues. Thanks - looking forward to more videos.
@jamiperry3827
2 жыл бұрын
These are so cute! I love the tall slender teal one... my fav color!!
@mandyfreshiesvibrantdesigns
2 жыл бұрын
That's from Fall Out my husband plays that game long time ago. I love how the cups came out . 😍😍😍
@kristineallison4787
2 жыл бұрын
This is something I will never have the pleasure of making or needing to learn but it was so cool to watch. You are such an inspiration and joy to watch. I agree with another comment so jealous lol, but extremely happy for you. Tfs
@SimplySallie
2 жыл бұрын
Aww thank you for watching Kristine, this means so much to have the support!!
@patrickh9810
Жыл бұрын
I don't own a laser (cutter) machine. One day I will and then I will come back ☺️ Enjoyed watching thanks so much.
@SimplySallie
Жыл бұрын
Thank you!
@SimplySallie
Жыл бұрын
Thank you!
@warriorhook
2 жыл бұрын
The only thing that I’ve done different is steps per rotation I’ve had my rotoboss and thunder laser for over a year I set up steps per rotation one time and I’ve never had to do it again and I do a lot of tumblers it’s always worked out for me good video by the way
@thesquirrel905
9 ай бұрын
I know this is an old video but I followed all your steps. I also have a Nova 51/130 with a roto boss and every time I send it over to laser the mug it says “Rotate mode disables absolute cs” and won’t let me proceed at all. Any ideas?
@2andor4
2 жыл бұрын
Can't wait till you put them in your shop so I can get some. I think they would also be good with my company logo on it. Another great video!
@enriqueguiterrez6123
Жыл бұрын
Great video. We have a 130w Aeon Nova and the settings were near perfect. We just went from a focus of 7 to 7.5 as the 7 was too strong.
@brendamaroney2966
2 жыл бұрын
Simply Sallie loved watching the tumblers on your co2 laser. Making tumblers looks like so much fun to make. Will you be personalizing them in your Etsy shop? I love that you took different sizes and showed them side by side or after the other. I heard you say your husband helped you come up with the calculation. Could you and Jon show the math or where he came up with the way? I know Lightburn is fantastic, but understanding that number and how to calculate it for me would help plan the rotation or, should I say, understand the cycle. I know it will be practice to fine tune, but the principles help to see it explained simply for me would help, I think, understand how to make sure my ends meet flush, not askew.
@taylorhilliard7082
2 жыл бұрын
I run my sane machine at 400/20/7mm focus with the same line interval with no problems. Cuts it like butter at 20 power
@SimplySallie
2 жыл бұрын
I tested out lower power on my machine and it had some spots that didn't go through the powder coat fully, but this was on my old tester cup. I'll try this out again on a newer cup as well! Thanks!
@computercreationz
2 жыл бұрын
Loved the video, I appreciate the shout out in the video!
@SimplySallie
2 жыл бұрын
Your video helped me figure out a ton!! Love making tumblers.
@bekahfielder2305
2 жыл бұрын
This was SO COOL!!! Love it!!!💗💗💗
@atoptip6193
5 ай бұрын
Hi Sallie! The “etched” metal looks shiny. Does it actually get etched or does the coating burn off exposing metal? Also, what is the coating - anodizing? Paint? Great work and I will appreciate a response.
@dwaerial7858
Жыл бұрын
Hi Sallie, these videos are amazing. Thank you. What is the spray that you are using to clean up the tumblers please.
@rosanne7804
2 жыл бұрын
Great job, Sallie.
@SheWritesHerJourney_
2 жыл бұрын
Girllll they are sooo cuteeeee
@SimplySallie
2 жыл бұрын
Thanks!! They are addictive for sure 😍
@SheWritesHerJourney_
2 жыл бұрын
@@SimplySallie oh I can imagine 🥰
@murlyssnippets1964
2 жыл бұрын
Learned something new!
@tonycabero
2 жыл бұрын
Very nice and informative video! Thanks!
@rotobossrotaryattachments
2 жыл бұрын
Beautiful Work!!!!!
@SimplySallie
2 жыл бұрын
Thank you so much!
@Indpendnt27
Жыл бұрын
So cool.
@Shutterok
2 жыл бұрын
Hi, Sallie Sawandee kub Thank you for share to us. Your video is very useful for start to learn use laser machine. I need to know Rotoboss rotary attachment for thunder laser machine ,how to purchase its ? Thank you again for do video and share to us. Cheer!
@TheJu2ber
Жыл бұрын
Seems like a lot of guess work to find the steps/rotation. I wish you could enter the product circumference and lightburn would calculate the number of steps. Thanks for the video.
@LucyLu70
2 жыл бұрын
Thats amazing they came out great
@SimplySallie
2 жыл бұрын
Thank you!!
@TitansTales
Жыл бұрын
Link for the laser engraver and rotator would be amazing. I didn’t see it on your Amazon list
@erikkat1340
2 жыл бұрын
I would love for you to make a video on how to line up a design on a cup that already has a logo on it! I cannot figure out how to line it up to print where I want it over the logo.
@onyxmeuno
Жыл бұрын
Try using the center out origin or position for the placement of the start. Center your origin on your existent graphic as much as you can and also choose that option on Lightburn. It should work. I usually use that setting for my origin instead of the on the top edge of the piece being engraved.
11 ай бұрын
Have you ever done a Stanley tumbler? I am getting ready to buy my laser and after your video definitely going to switch to the brand you have! I need as many tips and tricks you have especially with the app to make them the right size that park worried me
@wileycovington4497
Жыл бұрын
Questions. I have many stainless tumblers. Can I paint them and then etch them in the laser?
@TheLaserKings
Жыл бұрын
Do I need to re do the test lines each time I set up the rotary? Because the first time I did it it worked really well, now 2 days later I did it again, and it seems I almost have double lines
@davebarker8184
Жыл бұрын
It only let's me use Y axis do you know the reason why it won't let me go to A?
@jacquescraftyexpressions5990
2 жыл бұрын
Great video. Thank you
@SimplySallie
2 жыл бұрын
Thanks for watching!!
@cassandrahickson3725
2 жыл бұрын
Beautiful........
@SimplySallie
2 жыл бұрын
Thank you Cassandra!
@Mark-yu5ni
Жыл бұрын
Thank you so much for sharing. Do you have to add the tape to the wine tumblers? We're looking at this machine as a replacement for our Minilase.
@patriotcanes1155
Жыл бұрын
What calipers do you use?
@kriss.5392
2 жыл бұрын
hi, how did you achieve the small details on the tumbler with the small flowers? im struggling to get my settings right for fine detailed engraving on tumblers
@JocelynMcKenzie-yp5rr
Жыл бұрын
Have you tried engraving with color?
@kandrstrickland9746
Жыл бұрын
Hi I was wondering were you bought the Fallout graphics??
@piratiniwood547
2 жыл бұрын
LOL! Energy-boost thing.....🤔 I thought it was a voodoo doll 😅 But, very cool, so many possibilities as long you have the inspiration. Do you, sometimes, have a "block" and no ideas? I think it's hard to re-invent yourself time after time. Say hi, to Jon.
@SimplySallie
2 жыл бұрын
🤣🤣🤣 I don't play it so I have no idea what it is called! Yes I get a block all the time- very normal! What gets me motivated is market research and trying new things! Constantly learning and growing. 😊
@steinbierz
Жыл бұрын
NIce video. I was wondering what the workflow would be if you had a powder-coated tumbler but wanted color rather than engraving down to stainless. Say I had a red tumbler and wanted a black logo on it. Would I do a normal engrave down to stainless, spray it with Cermark, and run the engrave again or is there an entirely different process that is more efficient? Thanks.
@IRTermite
Жыл бұрын
First, registering the secondary pass, after you put CerMark on there, would be next to impossible if you removed the cup from the rollers to paint it. I've never seen anyone laser CerMark over powder cost, but suppose the best approach is to do it on the first step on its own.
@steinbierz
Жыл бұрын
@@IRTermite Thanks. I wasn't certain if it was even an option; there are probably better ways to get color onto powder coating.
@thecountryjoat9824
2 жыл бұрын
Have you tried a photo on a tumbler? I'm curious how that 130w would do as far as photo engraving on tumblers. It's definitely worth trying.
@SimplySallie
2 жыл бұрын
Not yet, I definitely have it on my list to test out very soon and will let you know! 😊
@steinbierz
2 жыл бұрын
Great video...I subscribed. Where do you source your tumblers from? Thanks.
@alittleSouthernBrothers
2 жыл бұрын
do you do laser leather patches for caps?
@SimplySallie
2 жыл бұрын
Hey! I got your email and will get back today 😊
@alittleSouthernBrothers
2 жыл бұрын
@@SimplySallie thank you so much
@jessicahornlein8223
2 жыл бұрын
I have a tumbler I am trying to engrave, and the top diameter is bigger than the bottom. It is not like any of the tumblers you featured. I noticed the test line is like mine in the sense that it goes "off track". I am just concerned and wondering, if I use the top diameter, would my engraving be off? I am doing a football design on the top and the lower half the name of the team then persons name on the opposite side. I fear the bottom will not be accurate? Any advice?
@IRTermite
Жыл бұрын
You measure on top, and then angle your rollers inward to the bottom of the roller so they pinch down causing the lasered side of the roller to be level to the ground.
@margarettementor826
2 жыл бұрын
What font did you use for “Sallie?”
@SimplySallie
2 жыл бұрын
Hello spring design bundles 😊 it's by the artist linked in my description
@ThomasShue
Жыл бұрын
That is a helluva CO2 lazer
@curranc
2 жыл бұрын
Not supposed to be…but I’m jealous.
@SimplySallie
2 жыл бұрын
These were so much fun to make! ❤
@arianacordova8892
2 жыл бұрын
hoping they will be for sale so I can purchase ☺️❤️
Пікірлер: 76