My laser keeps spinning the cups off when I hit start or frame but then slows to the speed I have set when it engraves, how do I get it to stop so it won’t mess up my engraving on cups?
@omtechlaser
Ай бұрын
Hello, you can reach out to our customer support team via support@omtechlaser.com. They will provide professional support for you.
@medicinewheel357
10 ай бұрын
Best video for learning tumblers!
@griffo3043
5 ай бұрын
I'm kind of wondering why OMTech bother doing any videos at all the couple I've seen have been pretty much useless for such a great product you need to do better. 1. You removed all form of bed from the device adjustable shelf now what's it sitting on? because it's still able to up and down. There's also no mention of how you aligned it to the X top rail. 2. you changed from normal to rotary does changing it back ruin the existing settings I've seen other videos show you how to backup existing setting so you don't ruin your old settings. 3. You've located the drive rollers on the part of the tumbler that has a thread on it I just cant imagine why you'd do that risking it walking up and down the thread. 4. You've centred the device but how there are no markings on the rotary device. 5. No mention at all of how your going to stop the project from walking up the drive train nothing stopping it from doing this. 6. If I was OMTech I'd have suggested settings for all my models for this process or should we just destroy 6 tumblers working it out. 7. No mention of Lightburn suggested settings for line interval distance either. As a business owner and CEO if your going to do something do it properly this is pretty useless.
@brittanymacdonald4991
Жыл бұрын
I am confused my 60 watt engraver say not to engraver anything metallic yet everyone is engraving metal tumblers and other metallic things??? What am I missing?
@jaimiyoung8822
Жыл бұрын
As long as it is powder coated it’s good to engrave
@frederickheim8613
5 ай бұрын
You cannot engrave the metal, you can engrave the coating off, leaving the metal.
@fritziesuggs
2 жыл бұрын
Can you engrave any kind of tumbler or does it have to be a specific kind?
@omtechlaser
Жыл бұрын
With a PiBurn Rotary, you are able to engrave nearly any kind of tumbler!
@RussellRay
3 жыл бұрын
You have several different turners. What is the difference between them
@omtechlaser
3 жыл бұрын
Good question!! Yes, we have several types of Rotary Attachments. We have a 4-Wheel, Jaw Chuck, and "Hotdog" Rotary for cylindrical objects. Whereas, we have the 80mm for irregular-shaped objects. You can explore each one at omtechlaser.com/collections/accessories
@progettazioneerealizzazione
Жыл бұрын
For to connect and disconnect Rotary machine will be on or off and about to remove honey comb mine 50 w doesn't have it ,how i can rotary .. Dino
@Birdnson2012
3 жыл бұрын
Great video. Couple of questions, do you disconnect the rotary cable while the machine is on ? And when you disconnect it do you do.it while the machine is on ? When going back to regular, after plugging back y cable your settings Don't change right?
@omtechlaser
3 жыл бұрын
Great questions!! Yes, you have to disable the rotary device and can do so through LightBurn. Then you will have to disconnect the rotary device and connect the regular Y-Axis connection back while the machine is on. Afterwards you will have to reset the machine. For more questions or assistance, please reach our Technical Support Team at omtechlaser.com/pages/contact-us
@airwolf08
4 ай бұрын
You said once finished with the rotary you have to reset your machine how exactly do you do this please
@randysiebert1667
2 жыл бұрын
How do you make sure that rotary is centered with laser?
@omtechlaser
2 жыл бұрын
Good question! You will have to place your rotary on the bed and position the laser head over the rotary and object. You will then have to select your starting point and track the frame to see if it appears centered. Hope this helps!
@dawitjiru3178
Жыл бұрын
I have OMTECH 50W laser and same rotary, follow all instructions but every time I try to frame it it will jump and bee off the roller tried adjusting idle speed didn’t help and idea?
@sheenagraham8924
6 ай бұрын
A step by step settings in lightburn would be great. I know alot of people have bought Omtech lasers lately and like me need a little extra help. I have the k40+ and regular roller and it throws the cup off every time. I want to upgrade to the Chuck rotary but apparently it doesn't fit on mine.
@omtechlaser
6 ай бұрын
Hey there we appreciate your feedback! We will make sure to provide the suggestion to our marketing team. In the meantime, if you need any technical assistance please contact us. Please contact us at techsupport@omtechlaser.com we're also available by phone at (949)438-4949 during the business hours of 8:00AM - 5:00PM PST Monday-Friday. Thank you for your support.
@JCCreativeStudio
3 жыл бұрын
I was watching another maker and they went to machine settings in lightburn and made changes prior to the rotary settings but I didn’t see you do that. Also they said some rotary machines the art needs to be mirrored first. I have this laser and your rotary. Are those things that need done and just wasn’t part of this tutorial?
@omtechlaser
3 жыл бұрын
If there was something not addressed, please reach out to our Technical Support Team for further assistance!
@jessesieben
Жыл бұрын
Where do you put the rotary, we have 100 watt and chuck style
@bearman3163
Жыл бұрын
How long did it take to engrave the tumbler in the video?
@josemanuelamayaleiva7824
Жыл бұрын
deberia de enseñar como funciona con el programa rdword
@rmw603
10 ай бұрын
@omtechlaser I've watched this video many times. I have an OMTech 80w and have matched the steps in this video one for one. All of my settings are the same. It does not cut through my powder coating. And now, I just get Frame Slop. Any advice?
@omtechlaser
10 ай бұрын
Hey Robert we think it would be best for one of our senior techs to assist you. We were able to locate your order and sent you an email regarding getting you set-up with our techs for help.
@rmw603
10 ай бұрын
awesome! Thank you! I figured the frame slop out, but definitely need some tech help. I'll be on the lookout for email. Thanks again. @@omtechlaser
@Acanders1980
Жыл бұрын
I’m confused how do I focus the machine if I removed the bed and set the rotary on the bottom below the blades?
@drood78
Жыл бұрын
Did you watch the video?
@rcgamer
2 жыл бұрын
With the wheeled rotary the cup is just moving around like crazy.
@itswittyweirdo
2 жыл бұрын
Exactly
@johngomez4957
2 жыл бұрын
thank you for the video
@melissacase6160
3 жыл бұрын
I just tried out my new rotary with the settings at 30 power. It is on a white tumbler and there is a yellow almost burn coloring around the lettering. Does that happen when the power is too high?
@omtechlaser
3 жыл бұрын
Hey there, thanks for reaching out! There are different factors that can lead to discoloration including the material and quality of the material, beam alignment, and the speed/power of your settings. We suggest slightly decreasing the power and increase the speed . In some cases the tumblers will need to be cleaned after being processed. For more assistance or advice, please reach out to our Technical Support Team at omtechlaser.com/pages/contact-us
@bjhstetson26
Жыл бұрын
My 80W auto focus says that i can not engrave metal, what tumblers can we engrave? The one you engraved looked like metal.
@omtechlaser
Жыл бұрын
Hello, we're checking in with our specialists here in-house to get a clear answer to your question, we'll will get back to you shortly!
@jamesnichols9592
Жыл бұрын
you can engrave the finish off metal, and plain metal you can apply brilliance and it will stick to metal after you laser it
@SipDIY
3 жыл бұрын
Great video...I think I can do this Luis....Deniera here...hopefully they're back in stock for immediate purchase.
@omtechlaser
3 жыл бұрын
Hey Deniera!! We are expecting a lot of our machines to be available in early April. We appreciate your patience and support!! For the time being, you can click the blue "Email Me When Available" button next to the desired machine that is out of stock.
@SipDIY
3 жыл бұрын
@@omtechlaser No Luis, I have the laser...just need the rotary....will check the site tonight.
@cougartracker72
3 жыл бұрын
Great video but your missing some steps. 1. what is your home setting? 2. Where do you have the home set to?
@omtechlaser
3 жыл бұрын
Hey Ben, great questions!! In this video, the machine homes to the top right. The origin settings for the project were set to Current Position, and origin location was set to top left. Hope this helps!!
@jeff2487
2 жыл бұрын
Does the rotary sit in the tray in the bottom of laser?
@omtechlaser
2 жыл бұрын
If your machine has a debris collection system (catch tray), it may sit on top. If not, it can rest on the honeycomb bed. Hope this helps!
@alexydaisy77
3 жыл бұрын
estoy interesado en com prar una cual es precio que tiene y tinen tecn
¡Buena pregunta! Ofrecemos soporte de habla hispana. Puede comunicarse con ellos en 949-503-9348.
@rogert5365
3 жыл бұрын
I just bought the 50W laser from omtech. It is supposed to be here next week. What speed and power would you recommend me to start with when engraving tumblers? I was thinking 250mm/sec at 50% power before I finished watching the video. I noticed you go slower.
@omtechlaser
3 жыл бұрын
Hey there, thanks for reaching out and choosing us as your laser provider! We're excited to have you become apart of the OMTech Community! In regards to your settings, we suggest trying our initial settings first. If the results are not the best, you can start reducing the speed. This will also depend on your wattage model, as higher wattage machines can engrave with higher speeds. For more assistance or advice, please reach out to our Technical Support Team at omtechlaser.com/pages/contact-us
@rogert5365
3 жыл бұрын
@@omtechlaser I'm having trouble getting all of the powdercoating in my cuts with the 50W laser with some colors (red, gray so far black works well). I even bump the power up to 100% and move anywhere from 150 to 75mm/s and still have some small dots of powdercoating. I'm using 0.04mm LPI. Do you think it is something with the laser or just those color tumblers? The cut looks grayish white when done engraving and there will be bumps all over it. When I clean it off some spots look good but others don't. Any help would be greatly appreciated
@omtechlaser
3 жыл бұрын
@@rogert5365 Hey there!! This can depend on the color coating and the quality of the tumbler. We suggest staying under 60% max power and reduce the speed. Furthermore, we suggest performing quick and small sample tests. Our specialist team does recommend setting the LPI at around .07-.09mm. For further assistance, feel free to reach our Technical Support Team at omtechlaser.com/pages/contact-us
@Mageikman
3 жыл бұрын
Do you run the air assist while engraving If so is it set pretty high or somewhat low
@omtechlaser
3 жыл бұрын
Good question!! We used the stock air assist for this model, and used it at around 4-7 psi. Hope this helps!!
@Mageikman
3 жыл бұрын
@@omtechlaser thank you yes it does my rotary will be here Friday so I'm actually glad this video was posted so I have a good starting point to go by as fat as settings go because I have the 80w red and black machine
@omtechlaser
3 жыл бұрын
@@Mageikman That's awesome to hear!! Acquiring a rotary is an absolute game-changer!!
@007Bashman
8 ай бұрын
Lazy presentation at best, this will not get you through actually engraving tumblers using Lightburn. Please up the content for your customers guys.
@omtechlaser
8 ай бұрын
Hey Anthony we appreciate your feedback and will continue working on improving our content.
Пікірлер: 59