CHECK OUT OUR EBAY STORE: K20 K24 / HONDA PARTS IN STOCK READY TO SHIP www.ebay.com/str/racepartsnow
@lazygamer9751
2 жыл бұрын
Which k20
@123onemind
Жыл бұрын
I would like to know can this setup be placed in a ep3
@EdwardJoy
Жыл бұрын
Awesome!
@hondaguy2532
Жыл бұрын
Wat fuel bro
@Az-bseries
2 ай бұрын
Wheres the links? Camshaft data?
@stevewelborn8744
3 жыл бұрын
The port job looks very nice. You can tell he knew what he was doing. His very nice work is responsible for a chunk of that 300 hp.
@mikegutierrez2008
2 жыл бұрын
Currently halfway on doing my straight k24 swap into my ek hatch , thanks for all the input and I can relate since I'm in the kinda semi budget buld on my motor , maybe one of the best straight forward vids , keep it up and more power to your channel !!
@iron-gamerstv
2 жыл бұрын
This is why , when I found your channel today! I knew I found a gem on KZitem. You guys are awesome, you know what you're talking about and I'm a fan of that. Keep making great content about Honda's. I appreciate you for all that.
@SinisterBlackShadow
2 жыл бұрын
Dang..thanks dude for all your videos on this motor, including your 1000HP build. I have learned a good bit watching here on this channel. Just wanted to say thanks for the uploads.
@elmaschingon8237
Жыл бұрын
Thanks for taking your time and not B.S people. Straight to the point, and to let people know that you can also build a motor for cheap, have fun and say I have a 10 sec car.
@NestorPulido85
3 жыл бұрын
I inherited a 05 Civic EM2 EX SE 5 speed and I was never in the import scene maybe bc I just never opted to buy one. But since I've own this civic I've fallen In love with it I've now owned it for about 2 years and seeing the K series engine and the potential it has has opened my eyes. The only thing for me has been and I'm sure we can agree is that there is a lot of misleading information on the internet. I like your channel and what you guys are doing so my plan now is to swap a k series in my EM2 thanks again for your channel maybe one day we can meet at the track.
@Jigga2700
11 ай бұрын
I love that message towards the end about you dropping Knowledge so we can go into this with confidence I’m glad I ran into your channel💯👌🏽
@royn.1968
3 жыл бұрын
ITB's would be sick!! A collab with PFI Speed would be so cool! Take care MIke!
@shawnmarques7117
9 ай бұрын
I built a k20/k24 makes about 287 hp 195 torque on pump gas.Drag cartel cams 3.2
@tallglassofwhiskeysauce8552
2 жыл бұрын
After watching this video alone I’m now subscribed to you. I have a 2000 Honda Civic coupe and this is great for any other questions I have or concerns I need for my k swap build.
@anthonycastro715
3 жыл бұрын
Dam always good content!!! Every video they put out i watch all the way through every time!!! Beast of a motor as well
@zacharycofer3791
2 жыл бұрын
Thanks for dropping the knowledge, it's a big step in the right direction to improve the safety an advance this sport.
@Ricology56
3 жыл бұрын
Watching you from WA. Thanks for providing links in description!
@thecincylife1603
3 жыл бұрын
I have been waiting for this vid thank you
@bryanmitchell8295
Жыл бұрын
DIYMike your content is great man! Watching you from Philly! I have been out of the Honda scene for 10-12 years. But I am looking to getting back into it.
@michaelb5330
3 жыл бұрын
So good that your sharing knowledge Very interesting and open not to mention able to save people money and get them into to motor sports more people competing So many others just want to make huge money from others Great attitude From Australia
@joehowell9058
3 жыл бұрын
Great build great Channel y'all keep up the good work and I'll keep watching. Y'all switch me over to K series so you're doing something right considering a drag race a b series car for over 20 years.
@N54_Dre
2 жыл бұрын
Nyc definitely here. Thanks for dropping them gems. 💪🏾💪🏾💪🏾👌🏾
@dyllenger
3 жыл бұрын
saving this video for when the time comes ! thanks for sharing mike
@TrackSol
3 жыл бұрын
Hi Mike! Thanks for the breakdown! 👍👍
@Ludeboi420
2 жыл бұрын
watching you since the pink del Sol keep the Honda game alive man I'm looking to jump back in with a k series hatch or CRX
@waltermiller2534
2 жыл бұрын
Kansas watching. Building my k24/k20 ordered some stuff from your eBay site. Thanks for the info
@LuisGarcia-tb9po
Жыл бұрын
I want to take my 05 Accord lx and take it from its stock 160hp to about 250hp, it’s an amazing car and I think just a little more power after supporting mods would make it a perfect car for me ❤
@K20Aaccord
Жыл бұрын
How’s the update ?
@killer2931
Жыл бұрын
A2 swap from an 04-05 TSX will get you well on your way. Drops right into the 03-05 Accord. Just need a tuner to disable EGR.
@brucey5585
5 ай бұрын
Your accord have a 9.7 compression. Change that to 12.4:1 and add cams. Then get a catless header. Also get a tuner. You should now be close to 230-250. Dont forget premium gas only from now on.
@miixfixxgarage
2 жыл бұрын
Much appreciated with the intel!!! REAL GEMS 💎 of info straightup!!
@hectoralva787
Жыл бұрын
Nice I’m a first time viewer from Florida and I can’t wait to put a k series into my hatch and hit 10’s or maybe high 9’s 😎
@jrmarine2077
3 жыл бұрын
Houston Tx here good job bro
@diveaddict6885
3 жыл бұрын
Car building always a learning curve
@patrickdailey4825
3 жыл бұрын
Appreciate all u do
@jacobkobernik1596
3 жыл бұрын
Good info, thanks for sharing Mike. Keep making that content!
@gtgodbear6320
Жыл бұрын
Rods, 13.5:1 pistons, dual valve springs, 2,200cc injectors, sleaves, inserts, ECU and flex fuel E85R/E90.
@rjrulz2
3 жыл бұрын
This is my favorite automotive KZitem channel! Thanks for all the information
@arthellstrobles1241
2 жыл бұрын
Thanks for the knowledge, slapped the like and sub button.
@NEWNATURE777
2 жыл бұрын
Thank you for dropping some tips and knowledge, you should more subscribers 👍
@Constan19
3 жыл бұрын
Watching from France 🇨🇵
@bryanbridges6152
3 жыл бұрын
Keep up the great work, more All motor k series videos please
@Corleone_123
7 ай бұрын
Thank You so much! Really simple built & I need your help with my 2 crx….
@tjabdon606
3 жыл бұрын
Good info man. Saves a guy time and money
@cocx88
3 жыл бұрын
Thanks for being real mike
@adamlakey1554
3 жыл бұрын
Ive already been looking into this. Swaping a k24 into my 98 hatch takes more than a motor. Lol so i built and daily the single cam for reliability for fun. But k is next!
@mitchelllucier6930
3 жыл бұрын
Thanks for sharing this info mike
@alexortiz5660
3 жыл бұрын
Dope video. Now all I need to do is build it and put it in my 1st gen crv.
@funkyd04
Жыл бұрын
Super curious about how you went about the porting and matching, need a good video to follow for my own work
@richard1galvin
2 жыл бұрын
Great build.
@colorblind1983
3 жыл бұрын
Looks like a fun project
@MiSCHiEF_BassMusic
6 ай бұрын
Thanks for the knowledge
@slowskietube
3 жыл бұрын
Jersey is Here!!
@onehellofapunkrockshow6181
3 жыл бұрын
Florida reppin the set
@875-performance4
2 жыл бұрын
Awesome sharing
@mikesanto69
2 жыл бұрын
Big K community in Phoenix too...Home of HASPORT!
@ashtonmaass6055
3 жыл бұрын
Minneapolis here baby!
@ashtonmaass6055
3 жыл бұрын
Pink widow fans unite
@HotRod-wv4vm
3 жыл бұрын
I have a Honda Element, no civic but I enjoy your show
@Spudstrodamus
3 жыл бұрын
Thanks for the shout out. New Jersey I'm the house. #RPMACT
@antwyngascar
Жыл бұрын
Thanks bro I'm on this asap
@kevinkev1530
3 жыл бұрын
Thank you, 🔥📛 tips
@seekerofgrace1247
2 жыл бұрын
Did you see a big improvement from the side feed intake manifold to the xcessive center feed?
@toysforboysrc
6 ай бұрын
From @10:00 onwards about ppl being secretive vs sharing the knowledge, you get more bees with honey💪 it’s not like helping others will undo what you have accomplished or your wisdom… even if those types of ppl were to speak out what they know, it’s still not going to hurt them in the kind of way you would imagine it would bcs it STILL takes months and years to be physically capable and knowledgeable enough to a apply that advice and execute it well enough to be any kind of a threat while still assuming you also have the “connections” of social network and the time and money to buy parts and labor services. The real crowds that might be a competitive threat are those on the track as often as you, not the ones spending half their time on YT and still in phase 1 or 2 of this racing demographic. So what you said and how you put it is a mature and noble way to clear that statement because… todays newcomers are tomorrow’s future for motor sports UNLESS yall want this whole drag scene to go fully electric 😂… OMG imagine the crowd on the bleachers wearing Bluetooth headphones so that we could all hear the AI simulated exhaust on the electric cars on the drag strip 😆.
@ScollayTable
3 жыл бұрын
You guys should build a track car!
@joaquinvalencia3076
Жыл бұрын
Have a question. Wich series at the button you used? And what do you think about the nippon rods and pistons for k24A jdm
@seanforehand755
3 жыл бұрын
I really want to do this build and put it in my e30 lol
@raviolitrail
3 жыл бұрын
I wanna do this build for my Miata too.
@waltercox4577
2 жыл бұрын
Lol exactly why I'm looking it up, same here
@ajnorris4562
Ай бұрын
Same!😂
@AngelTorres-ny6cn
3 ай бұрын
Also a lithium bank or super caps will help feed the engine it's crucial electric power.
@carrollcheek8817
3 жыл бұрын
Thank you, I thought you might know weight of long block sans any accessories
@bobbydelamar606
Жыл бұрын
I have a TSX K24A2 in my 1989 CRX. The rods should be okay right? I just need Type S oil pump for bottom end reliability...?
@tommygomez5343
2 жыл бұрын
Can you post a link to the throttle body and intake adapter you used please?
@kallday4584
3 жыл бұрын
Time to build. From Nor Cal
@mrcurtis3714
3 жыл бұрын
Canada don't forget us eh.
@seshelbow336
Жыл бұрын
i have my exhaust exit out of the hood but then over my roof and pointing directly at my rear wing for extra downforce
@roywalther8472
3 жыл бұрын
Saludos desde España🇪🇦
@seanforehand755
3 жыл бұрын
Man that run was damn near a half mile with all that darting around lol
@giannagiavelli5098
2 жыл бұрын
So if I want to someday rebuild my B16a for more power what would u recommend
@unknow5518
2 жыл бұрын
Hi can i make bold on 300hp skunk intk exhaust full and only rebuild the entire engine with pist con ecc
@jaysonperez3705
3 жыл бұрын
@diymike what version of maxspeeding coil overs do you have on jena and did you swap out the springs? Is she stiff ? Like a drag coil?
@thedude3189
2 жыл бұрын
Damn all I need is good cams and valvetrain I have everything else. I hope I can hit 300. 🙏
@ytmB4HyU4kUq
7 ай бұрын
What transmission did you guys use? 5spd? 6spd? LSD? Good content, thanks.
@carrollcheek8817
3 жыл бұрын
I appreciate your thinking. I want to build a Honda for a dirt midget. Weight is a big factor. Can you tell me what a long block weighs? Including pan and valve cover. Thanks, friend
@diymike
3 жыл бұрын
307 pounds. thats fully dressed.
@rj6198
3 жыл бұрын
This video is why I f@##'s with yall man. Thx for the tips 🤙🏼
@d.i.mdoitmyselfgarage8874
2 жыл бұрын
Any head modification like springs to accommodate the cams?
@MealerRacing5
3 жыл бұрын
how are you running that fuel cell with the anti slosh foam in it?
@dc2kai
3 жыл бұрын
Love from North Carolina! 🇰🇭x🇱🇦
@diymike
3 жыл бұрын
🇱🇦🇱🇦🇱🇦🇱🇦🙏🏼🙏🏼🙏🏼
@bseries8826
3 жыл бұрын
Sheeeeshs
@zacharycofer3791
2 жыл бұрын
I wouldn't say that loosing 2mph because of putting the duckbill on the car was dumb, because me personally when you get into the 9s that extra bit of down force does make the car feel alot more stable when you get over 130mph in the 1/4
@dc5_enice835
2 жыл бұрын
How is the idle running those cams, like will it be street able?
@javonyoung3045
3 жыл бұрын
Where’s the link to the pdf? I don’t see it in the description anywhere
@jamesyoung5610
3 жыл бұрын
Yup
@douathao7038
3 жыл бұрын
What fuel? There's a local guy here in Sac low budget k20/24 drag cartel camshaft/ Nippon piston/ rod, full interior street car on pump e85 running low 11s.
@telmolourenco1437
Жыл бұрын
Hi I have an rsx type s so do I still need to get a k24 block or my block would work with this setup?
@SDCrashead
Жыл бұрын
Hi. I am closely looking all of your engine build videos. I am from Serbia/Europe where Hondas are not even in third plan, here everything is about VW and Audi :( Anyway I have Honda Accord CU2 Modulo 2009, or Acura TSX 2009 with K24Z3 engine and AT. What are your thought on making it 300-400 horses and still be like daily driver? Thanks in advance
@romellojames6690
8 ай бұрын
Ty for the free game
@j.danaclark89
3 жыл бұрын
Now to mate an engine like that to a rwd trans and graft it into my old car.
@josephdegoma3902
3 жыл бұрын
Wow!!was that on a full eg chassis?
@kouxiong92
2 жыл бұрын
I’m in the process of building a k24/k20(tsx/Z1) since my z1 started knocking. I wanted to go atleast 11.5.1 compression and was looking into RL5 pistons. However, I was reading some forums and RL5 pistons have some clearance issues or what not. Wanted to know your inputs on which pistons to go with. Thanks again for the vid and thanks for sharing! Subbed!
@TommyBlazeHD
2 жыл бұрын
Same. I'm doing research now and I want to do a K20/24 Frankenstien street build. Is it worth just upgrading the pistons alone?
@ds-zd9qz
2 жыл бұрын
Sounds like a question you should really ask your machine shop.
@kouxiong92
2 жыл бұрын
@@ds-zd9qz sounds about right, dont really want to get them if i have to shave it. I guess ill go with some NRP cast piston since its jus a street build.
@06Dc5.Jordan
Жыл бұрын
Did u needed to degree the motor with those piston/compression?
@anthonyespinoza5340
3 жыл бұрын
No chicago Come on mike bro race sence is hard asf here
@diymike
3 жыл бұрын
my apologies sir!
@hoochhenry
3 жыл бұрын
Any link for the intake manifold
@ajtorress_21
2 ай бұрын
hey i recently picked up a k20 head i bought the same skunk2 stag 3 cams, you mentioned you got ur head ported is that optional or can you give me a breakdown how that works
@mooeing
3 жыл бұрын
Man for the people here
@chrismuniz8515
Жыл бұрын
Did you use stock cam gear ⚙️? And just got skunk 2 shafts?
@michaellomax7991
Жыл бұрын
I have a 2002 Honda Civic ex coupe, I have a 2002 Honda CR-V engine that I think is a k24, I wanna build that engine but keep a/c power steering, and auto trans. I want to turn my car into more of a show type car but I wanna scare people a lil bit to 😂😂 what mods would you guys suggest to crank out 250 hp or so without turbe
@JP-xx2br
2 жыл бұрын
What axles do u use? And is it worth using si LSD?
@dougchilton-tz3on
Жыл бұрын
Could you still reliably daily this motor on pump gas?
Пікірлер: 349