nah bro ain’t no one did it better than you definitely the first to make a great informative video 💯
@eddieblcc
3 жыл бұрын
This a dope comment man thank you brother 😊 I got Jack in the box head now lol
@bri-bbri-bmusic3066
3 жыл бұрын
Yo Fam I appreciate this so all you connection points you are connecting with the pins then cutting them right?
@eddieblcc
3 жыл бұрын
@@bri-bbri-bmusic3066 yes I'm cutting them but I also leave a little room to work with just in case I have to remove it never cut the pin too short or it's a pain man and thank you
@bri-bbri-bmusic3066
3 жыл бұрын
Thanks again E I really appreciate this help
@jason6010
Жыл бұрын
Bear Garcia was making these on VHS in the early 90s.
@OgKrazyNick
Жыл бұрын
“We have to support each other, my brother in this hard struggle” 🤝🏽 that could’ve been a rap song right there!
@eddieblcc
Жыл бұрын
Yes sir I'm here to help...
@OgKrazyNick
Жыл бұрын
@@eddieblcc how do you learn how to copy paste that’s important!
@theworldaccordingtoali387
2 жыл бұрын
Thank you for taking the time to explain your style. It’s clean, very creative.
@eddieblcc
2 жыл бұрын
Thank you brother I really appreciate that it gives me the motivation to keep doing what I'm doing God bless bro
@Cochise231
2 жыл бұрын
Thank you brother for your videos they are the only ones that try to really explain things it is very much appreciated I haven’t seen a new video from you in a while I hope all is good with you and your family during these crazy times just wanted to let you know that you are missed and your work is appreciated God Bless you & yours
@eddieblcc
2 жыл бұрын
Thank you for the kind words brother God is good my friend stay tuned and thanks for the encouragement dose. Bel-Air part 2 hydrolic install coming up God bless you and the family peace brother.
@OgKrazyNick
Жыл бұрын
My boy Eddie teaching people the hustle! 🔥
@michaelspoonmore8427
8 ай бұрын
Thanks for keeping our hobby rollin on hip
@lowone21
3 жыл бұрын
I took a screen shot of the pins. Thank you forgiving out this advice. Much appreciate!
@eddieblcc
3 жыл бұрын
Anytime brother peace
@rananaeem2900
2 жыл бұрын
Hi
@FIJFIY87
3 жыл бұрын
appreciate the video, not a lot of people wanna show how to do this for some weirdo ass reason. thank you
@eddieblcc
3 жыл бұрын
Yeah I feel that I had to teach myself I asked a few questions but all in the end I did it myself thank you brother peace
@eddieblcc
3 жыл бұрын
Greed probably.
@gilbertcampos8007
2 жыл бұрын
Thanks 4 the scoop. Sweet set up
@OgKrazyNick
Жыл бұрын
You have it set up like a real Lowrider I saw how you had that realistic hop you’re really killing the game Eddie with the fabrications! 😮
@Cochise231
3 жыл бұрын
I appreciate your time You made it very clear and it is a very big Help Thank you and Peace to you and yours
@eddieblcc
3 жыл бұрын
Thank you so much brother I really appreciate your words stay tuned there's going to be a part two with more details
@dereed5991
3 жыл бұрын
Yessir!!! Good work. Thank U Eddie 🙌🏾💯💯
@eddieblcc
3 жыл бұрын
Thank you brother 😊
@creativewoodz
Жыл бұрын
That's Dope Brother!
@stig800
3 жыл бұрын
I made one a few years ago not as good as yours. I will be watching and I will have another go.great video.
@eddieblcc
3 жыл бұрын
If you ever need any help I got you old friend
@ruckusrodkustom8140
Жыл бұрын
Very cool! Good job!
@eddieblcc
Жыл бұрын
Thanks for watching brother and also for the cool words
@tonyg7884
3 жыл бұрын
Nice video bro, I'm new to the model lowrider thing. I've been trying to find a video on how to make one. Two months ago I bought a custom 1/25 1958 Impala wagon body only. So had to get a donor kit for parts. I found a 1/25 Revell 1958 Impala kit on eBay and it came with a new set of pegasus wire wheels. So anyways I was about to give up on the model lowrider thing. But found your video, thanks to you now I'm going to give it a try and see what happens. You got new subscriber!
@eddieblcc
3 жыл бұрын
man this a cool comment this why I try and make the video so people can learn and not give up on the hobby you know this been around since I was a kid why not keep it going it taught me something maybe I can teach somebody else something thank you for the description buddy I appreciate you more than you know
@burnzy5150
2 жыл бұрын
@Tony G how did your build end up turning out? Im trying to learn as well any advice?
@rickhenry2212
2 жыл бұрын
Thanks for the 411. I've been searching for a 55 rag.. I need to learn how to post. I have some head shakers
@jdthegreatone2757
Жыл бұрын
Ahh man you came thru with this one big dog,im getting into buliding and this was a big help Thank you!
@eddieblcc
Жыл бұрын
No prob brother thank you for watching and God bless I appreciate you
@ernestomartinez3481
3 жыл бұрын
Right on bro!!! It's really awesome that we all have our own style Dre one is the man and the scrounging for parts around here you couldn't find a pen that work the tubing was gone or the Springs were missing lol👌👍👊✌💯💣
@eddieblcc
3 жыл бұрын
Lol this funny thank you brother 😊
@ernestomartinez3481
3 жыл бұрын
Cool bro make sure you keep us posted I want to see that Chevy spank some bumper😉😁
@eddieblcc
3 жыл бұрын
@@ernestomartinez3481 lol thank you brother 😊
@kdkustoms
3 жыл бұрын
Awesome video brother! thank you !!
@eddieblcc
3 жыл бұрын
Thank you brother 😊
@imaginenonn37
2 жыл бұрын
Nice video, thanks for sharing.
@eddieblcc
2 жыл бұрын
Thank you for watching brother I really appreciate you man good looking out
@iixsupreme_streetz4501
2 жыл бұрын
I love how you do your style G with those model car projects😏
@eddieblcc
2 жыл бұрын
Thank you for watching
@iixsupreme_streetz4501
2 жыл бұрын
@@eddieblcc 👍
@petesmodelcarcustoms584
3 жыл бұрын
Eddie. That was the most helpful vid on suspension I've seen🤩thanks a lot and best wishes from jolly old England. Pete😎
@eddieblcc
3 жыл бұрын
Wow england awesome and thank you brother I appreciate you ☺️
@petesmodelcarcustoms584
3 жыл бұрын
@@eddieblcc I was subbed to you but you seemed closed but have subbed again as you've restarted. I'm sawing up parts from a 51 bel air following what you said. And putting Jimmy Flintstone chopped body on it. 😎Pete😎
@petesmodelcarcustoms584
3 жыл бұрын
@@eddieblcc Wow, you've subbed me😲👍👍I feel honoured when people with your level of skills are interested in the models I'm doing. I've sawn loads of bits. Back ends swinging. Front upper a arms I've stolen from corvette to mount in bel air. Thanks for your advice and support,Eddie, cool. 👍Pete 😎
@eddieblcc
3 жыл бұрын
@@petesmodelcarcustoms584 thank you brother I appreciate you man and awesome comment too
@petesmodelcarcustoms584
3 жыл бұрын
@@eddieblcc I try to be straight up about stuff and hate b, s. 😎
@DerangedDrew
Жыл бұрын
Hey man great tutorial, looking forward to putting this into practice. Regards from Australia.
@eddieblcc
Жыл бұрын
Any time brother thank you for watching take your time and kill it on your build. God bless
@DerangedDrew
Жыл бұрын
@@eddieblcc Im partially thru a 61 impala build thats static but I wanna do another will full suspension articulation. Will keep you posted bro. Thank you.
@eddieblcc
Жыл бұрын
@@DerangedDrew thank you brother I gotta see this keep up the good work. peace ✌️✌️ brother
@jrsscalemodelz4378
3 жыл бұрын
That’s a real nice belair 👍🏻 so far looking good nice video
@eddieblcc
3 жыл бұрын
Thanks brother I appreciate you watching man
@eddieblcc
3 жыл бұрын
Just subbed you
@deelist100
Жыл бұрын
This video helped a lot but for the slower hands on learners need a step by step video
@eddieblcc
Жыл бұрын
You for supporting the channel my brother much appreciated good luck on the building it's going to come out tight.
@deelist100
Жыл бұрын
@@eddieblcc I still have questions like how exactly did you do the front half of the rear end as far attacking it to the bottom of the body
@chesterhawkins6147
2 жыл бұрын
E.blocc I still see you handling business I'm starting to get the picture on how to get this thing.hopefully I'll start next year on my own.building a corvair for myself and a 59convrt for a buddy.thats what taking all my time as of now. Keep doing what you do brother. Chester -denver
@eddieblcc
2 жыл бұрын
Thank you for the kind words brother this is pure motivation and encouragement for me to make another video God bless you and the family man
@johnnych1ngas
3 жыл бұрын
Thanks for sharing 👍👊
@eddieblcc
3 жыл бұрын
Thank you brother 😊
@szymonszewczyk8225
2 жыл бұрын
That 55 bel air,,got me wanting to buy a new kit now....cus that shit came out fresh eddie..💯2 thumbs up👍👍
@eddieblcc
2 жыл бұрын
You still got work to go thank you brother I'll be making a part too soon
@szymonszewczyk8225
2 жыл бұрын
@@eddieblcc that's what's up right their.its coming out 🔥.if u make a part 2 I'll definitely watch cussy,,,💯💯👍
@user-jh1tm8sw8s
5 ай бұрын
Very good bro
@Adam-ms2wg
2 жыл бұрын
Thank you!
@angelomartinez9686
3 жыл бұрын
You helpp a lotg thank you
@eddieblcc
3 жыл бұрын
Thank you very much brother stay tuned there's going to be a more detailed part 2 with the motors and strings peace
@pac-mantheamericanbully7328
3 жыл бұрын
Looking forward to part 2! 😄 good info brother!
@eddieblcc
3 жыл бұрын
Thank you brother 2 coming soon
@Reyes_Repainting_Curb_Service
3 жыл бұрын
Dope video keepum coming
@eddieblcc
3 жыл бұрын
Thank you bro
@Reyes_Repainting_Curb_Service
Жыл бұрын
Do you primer you cars before painting ?
@ceg1959
3 жыл бұрын
Thanks for all your advice. Does that kit come with the continental spare tire kit?
@eddieblcc
3 жыл бұрын
Yes it' does brother thank you for watching
@ccshowtime1462
3 жыл бұрын
Thanks homie
@joshuarogers932
3 жыл бұрын
Thanks for this man! Gonna try my first build soon! What are you using for ball joints?
@eddieblcc
3 жыл бұрын
Sink stopper chain thank you for watching brother I appreciate you
@OgKrazyNick
Жыл бұрын
You got 22K views on this video bro you are really successful man that’s a really good accomplishment for model car channels, bro
@eddieblcc
Жыл бұрын
I wish it was enough to get money from lol good looking out for watching these videos
@eddieblcc
Жыл бұрын
Nobody really tells all of them lowrider model car secrets so I just let it out there to see what happened and it did pretty good 😊
@OgKrazyNick
Жыл бұрын
@@eddieblcc FACTS
@OgKrazyNick
Жыл бұрын
@@eddieblcc And I see a lot of people tuned in for the knowledge look Eddie that’s a lot of use for a diecast channel! (🌌#SkyBlue) 1962 Chevrolet impala 283 C.i. PowerGlide I Had The Same Car Back In Da Day 1/64 Scale! kzitem.info/news/bejne/x5iQr5Vss2uZmXY
@OgKrazyNick
Жыл бұрын
@@eddieblcc video like that makes you about $100 if you can do that on a regular!
@robertvasco9950
2 ай бұрын
Like that I want to do a Jada Impala metal 1:24 scale custom lowrider thanks for the help.
@eddieblcc
2 ай бұрын
Appreciate you watching in commenting
@weaponexicanLOWMONEY
3 жыл бұрын
Hell yeah OG thanks for always spreading some knowledge. WHat sizes of styrene do you mainly use for for stuff like arms and cylinders? Thanks for subricribing too homie. I just dropped my first video on a rc 1/24 car
@eddieblcc
3 жыл бұрын
Thank you brother I appreciate you watching as nd this is a cool comment
@OgKrazyNick
Жыл бұрын
I have a navy blue and baby blue two toned 1955 belair and I also have a candy red (just impeccable) coming out soon!
@eddieblcc
Жыл бұрын
I hit the notification button so I'll be able to catch it on time
@OgKrazyNick
Жыл бұрын
@@eddieblcc KZitem got smart bro so when you subscribe to somebody’s channel it automatically has the bell set to receive all notifications. This is something that they fixed recently.
@andyperez700
Жыл бұрын
Enjoyed the vid very well explained ,but can you show how you put the motors in I really need help with that part
@eddieblcc
Жыл бұрын
Yep I sure can the video for that one is coming out soon it's going to be part 2 to the one that you coming over thanks for watching I appreciate you
@markjoneswheelsfordays568
Жыл бұрын
Nice
@eddieblcc
Жыл бұрын
Thank you For watching brother I appreciate you
@TheDriverr97
2 жыл бұрын
Yooo, any updates on the ride? Having trouble with the string hook up
@negromob4096
2 жыл бұрын
Thank you bro I'm about ready to start tearing shit up.💯💯😎✌️
@eddieblcc
2 жыл бұрын
Thank you for watching brother just take your time and you'll knock it out the ballpark I just sub to your channel good work when your car is man love it
@negromob4096
2 жыл бұрын
I will brother thank you guy's and helping us beginners get into more advanced details on our builds
@negromob4096
2 жыл бұрын
A brother would you be able to tell me where you order your rims and wheels from I've been having trouble trying to find some good pairs.
@negromob4096
2 жыл бұрын
Lowrider rims and wheels for the model cars
@eddieblcc
2 жыл бұрын
@@negromob4096 the only place I order rims from is Pegasus hobbies man they got a large selection to choose from you're going to like their store and they're not all that expensive God bless you brother and keep me informed on the model
@morales_805morales5
3 жыл бұрын
Great video. I am frustrated with the 55 I have been trying to add A Arms to. This video gave me some more ideas. What springs do you use? I tried using the ink pen ones, but I can’t get it correct.
@eddieblcc
3 жыл бұрын
If you go to home Depot they have a giant box of every size spring you can imagine it cost 5.99 I highly recommend that thank you for watching brother peace I wish I could send you a picture of the box I have it setting right here but I don't think KZitem lets us share pictures through the message
@morales_805morales5
3 жыл бұрын
@@eddieblcc I am in the model car Facebook groups under Rogelio Morales. Thanks
@eddieblcc
3 жыл бұрын
@@morales_805morales5 ok is it lowrider nation
@morales_805morales5
3 жыл бұрын
@@eddieblcc I am in that one, as well as some others.
@quarlomcswain6270
3 жыл бұрын
Thanks bro
@ThisNamesNowTaken
2 жыл бұрын
How could you get the wheels closer to zero camber doing this setup?
@quarlomcswain7631
3 жыл бұрын
damm my boi i think ima be able to do this bro on your next one could you eplain how to do the servos and string it up i feel i can learn from you bro
@eddieblcc
3 жыл бұрын
Yep I'm going in deeper because it's more very small crucial things that people need to know like how high to set the front so it isn't locked up too high thank you my brother I'm trying my best stay tuned peace
@freeddie2007
Жыл бұрын
👏🏾👏🏾👏🏾
@village5190
10 ай бұрын
I got a AMT 1963 Chevy Impala , where should I cut to get the top and bottom A arms ?
@thatonekidd6184
3 жыл бұрын
Can you make aye video on we’re to hook up the lines and the servo and Johnson motors
@Someone-hw9bv
Жыл бұрын
Can you do a full a-arm tutorial, I’m having a lot of trouble with them
@eddieblcc
Жыл бұрын
Thank you for watching brother and a video for that is coming next...
@johnlapa5469
Жыл бұрын
Brother can you suggest some pages as im a complete beginner my whole life I've always wanted to but never had the chance & here in Australia I have no clue where to start I have the kits though
@famesaeteurn8969
Жыл бұрын
Do you have a hydraulics tutorial from start to end?
@eddieblcc
Жыл бұрын
Not yet brother thanks for watching thank you for coming soon maybe I will have a part 2
@dre1onlymangram817
2 жыл бұрын
I see you picc'd up the ball to show them how to build good stuff bruh I'm still around good to see you fam .
@eddieblcc
2 жыл бұрын
Thank you brother much appreciated
@eddieblcc
2 жыл бұрын
I learned most of this stuff from watching your videos so big shout out to you Dre
@angelomartinez9686
3 жыл бұрын
That bad assssss gg
@eddieblcc
3 жыл бұрын
Thank you brother 😊
@angelomartinez9686
3 жыл бұрын
Keepp gggg bro
@insanediecast1858
2 жыл бұрын
How are bearings attached to the plastic, if they glued they won't move
@eddieblcc
2 жыл бұрын
They're connected by drilling a small round hole the same size as the bearing then you slide the bearing in the hole would like man maybe a half a drop of crazy glue and that'll hold it in there tight just keep it in there nice and straight and you should be good drill the hole drop the bearing in thank you brother for watching I appreciate you God bless
@skipjohnson9358
3 жыл бұрын
Thanks dawg💯💪🏾
@eddieblcc
3 жыл бұрын
Anytime brother helping is my thing.
@skipjohnson9358
3 жыл бұрын
@@eddieblcc You have a Instagram lol I want to keep you posted on the process dawg
@eddieblcc
3 жыл бұрын
@@skipjohnson9358 I don't bro haters with a video let everybody see have a good one peace
@skipjohnson9358
3 жыл бұрын
@@eddieblcc if you don’t have haters you ain’t doing something right I always say lol ,From this one vid I watched, I peep how raw you are..Been looking for this kind of vid forever dawg
@eddieblcc
3 жыл бұрын
@@skipjohnson9358 thank you brother I don't mind sharing this information that I know because I'm trying to keep the hobby going cuz I've been doing it for years so why not let some new kids do it for some more years no maybe they can teach day kids it's just a hard thing I appreciate the comments bro
@jorgeg2983
3 жыл бұрын
How much $ for a built or kit? Lol Thank you 🙏🏼 very well instructions
@eddieblcc
3 жыл бұрын
150 without a switch box and 200 for a complete a arm Hopper engine and all the trimmings and the box and thank you so much for watching brother I appreciate you peace
@youknoweverything7643
Жыл бұрын
How long does it take you to go from a new kit to completed car show low rider. Hey man thanks for the info instead of that pink melted plastic I used ever green white styrene tube looks better and stronger pivot point. Your right man your never gonna learn unless you go in there start cutting and experimenting and don't throw away the project if you mess up grab some spare parts from your scrap box and work through it you can build a low rider from a random body chassis and suspension cuse your cutting and chopping any way so don't waste a new kit if you been building a while use your scrap body and parts boxes and get wild with it. Hell mix and match the front bumper off one car onto another and build you a wild custom ride that only you have the only one in the world cuse you made it from random parts. I made a very big boat low rider two 62 thunder bird amt 2m1 kit bodies made it half a car longer and with Cadillac 67 coupe DeVille from back window back with the big wings it's sweet and looking sick it's been a year of work in progress working on it a few hours a weekend
@loshines3725
3 жыл бұрын
Cool video bro. I'm trying to do a 4 servo 64 impala. No hoping just a front back side to side dancer and 3 wheel. I appreciate any tips. I got you up on messenger but never heard back from you bro!
@eddieblcc
3 жыл бұрын
Thank you brother ,I'm on messenger
@Potman247
2 жыл бұрын
Hey bro how do string up the servos
@wassup_squez
27 күн бұрын
Bro you have any videos on how to wire your swervos? Wanna get into the hobby but can’t find any help on yhay
@eddieblcc
24 күн бұрын
There's videos on it type that in servos for model cars
@eddieblcc
24 күн бұрын
Thank you for checking out the video
@illy2066
Жыл бұрын
I wanna see how you build the back end step by step. I'm trying to learn so I can build mine
@eddieblcc
Жыл бұрын
Soon I'll make a part two to how to build the lowriders and that will definitely be in there so stay posted thank you for watching brother God bless
@illy2066
Жыл бұрын
@@eddieblcc 🙏 Thank you much. I'm definitely tuning in
@hemetcustoms1352
3 жыл бұрын
💯🔥🔥🔥🤯🤯🤯
@eddieblcc
3 жыл бұрын
Lol great comment brother thank you for watching.
@anthonywalker9408
2 жыл бұрын
Yup
@vinniemartinez6125
Жыл бұрын
I'm new to your channel. How did you make that back window? Please help me out. I use to build model cars in my teens and I'm in my 30s and I'm getting back into building model cars again. 🎸 🤘😎
@eddieblcc
Жыл бұрын
All I did was Drew a small square cut it out with the back of my exacto knife and then I sanded it to make it nice and square thank you for watching brother
@eddieblcc
Жыл бұрын
Oh yeah I had to add a square piece of styrene where the window goes before I cut the little square in it I appreciate you
@vinniemartinez6125
Жыл бұрын
@@eddieblcc i appreciate your vids
@78chevygang10
2 жыл бұрын
I see you bro
@eddieblcc
2 жыл бұрын
Thank you for watching I appreciate you brother
@747hin3
2 жыл бұрын
Really want a few of these cars.. How do I buy??
@eddieblcc
2 жыл бұрын
I just build them and try and help other people build them God bless brother peace thanks for watching
@Someone-hw9bv
2 жыл бұрын
Will there be a part 2?
@eddieblcc
2 жыл бұрын
Yes brother I'm slacking I'm going to get on it thank you for watching man God bless
@rmoreno9794
2 жыл бұрын
Would like to se part 2
@eddieblcc
2 жыл бұрын
Ok soon I know I'm late I should have been made it it's coming thank you for watching
@malsapper7709
3 жыл бұрын
Oh yeah
@alfonsocharles7555
Жыл бұрын
How much do you charge for a setup like that? I have a 61 and a 63 impala i wanna get work done
@eddieblcc
Жыл бұрын
75$ it take quite a bit of detail to achieve
@alfonsocharles7555
Жыл бұрын
@@eddieblcc where can I reach out at?
@alfonsocharles7555
Жыл бұрын
I want servos all around. Front, back,side to side and 3 wheel
@juansoria8004
Жыл бұрын
Where do u get the chains?
@eddieblcc
Жыл бұрын
From most hobbie store has them brother those are from Michael's craft store thank you for watching brother
@khonesavanhvorakoune8264
2 жыл бұрын
Hey Eddie I like your setup and I'm new to the game animal type of person that I need stuff to be in front of me to learn how to do it and I was wondering if you would like to build a complete chassis that you would like to sell and if you do please get back at me thank you
@quarlomcswain7631
3 жыл бұрын
bro man like he said people dont want to show how to do this major love bro if you have instagram look up qskustommodels you can see my progress there thanks my boi for the video
@eddieblcc
3 жыл бұрын
Sorry it took so long thank you my brother peace
@jaybee1158
2 жыл бұрын
That type of chain where exactly did u get that from and how did u hook it, did u glue it or…? Also what kind of motor do you use with your servos? Also what type do you use is it the 9g”? Just so I know if you answer my questions I know the motor you are using is the same as mine. Thank you for any help.
@eddieblcc
2 жыл бұрын
I got the chain from the hardware store it's a tub stopper chain and yes I glue them in place but first I drill a small hole the same size as the chain ball joint and I didn't understand the 9g thing and that's a Johnson motor I ordered off of Amazon also the little blue servos they're standard just look up servos at Amazon usually takes a day or two to get them thank you for watching brother
@jaybee1158
2 жыл бұрын
@@eddieblcc oh ok koo bro the 9g is the rating of the servos I seen on Amazon and at the hobby store I guess it’s another way they read volts. So the guy was telling me if the motor itself can’t handle a certain volt the motor will have a hard time working hence why I asked if the motor you have with the sorvos if it’s 5v or 2 v and etc. I appreciate your feed back what your doing is pretty koo I still have the hoppers from the 90’s and I have my other models but this is more so a newer thing which is pretty koo.. keep up the good work boss..
@eddieblcc
2 жыл бұрын
I think you're right about the 9g servo thing I think that is the one that I use it's the clear plastic blue one well it's blue clear plastic thanks again for watching man I'm glad I can be of some help God bless it takes a 9-volt battery to operate that particular servo I forgot to say that
@jaybee1158
2 жыл бұрын
@@eddieblcc koo thank you bro and GOD BLESS to you and yours as well
@OgKrazyNick
Жыл бұрын
Eddie, did you see my 1/64 scale ragtop (🎸#BlackSabbath)
@raynissan89
3 жыл бұрын
Hey bro bro how you do them telescoping cylinder?
@eddieblcc
3 жыл бұрын
Part 2 coming soon thanks for looking
@williamgrimm3033
3 жыл бұрын
Have you ever done telescopic for the rear & if so do you have a video of it. Thanks
@eddieblcc
3 жыл бұрын
Coming soon brother thank you for watching peace 😊
@williamgrimm3033
3 жыл бұрын
@@eddieblcc k I have a lil problem with a model I bought & I guess I was using to much power & rear end messed up I have it back together but I don't know how to run the string though & to the telescopics if you can help me out it would be VERY appreciative . Thanks
@eddieblcc
3 жыл бұрын
My next video part two I'm going to show you guys how the run the string and how to set the wheel spindles on the front so that the car lays down and where you should put the metal at to keep the plastic from cutting when the strings are running over it trust me my brother I'm trying to help everybody when this next part two video hits it's going to be everything I know so thank you for watching man and I do appreciate you
@Someone-hw9bv
3 жыл бұрын
What’s that pink stuff?
@eddieblcc
3 жыл бұрын
Those are Q-tips shafts brother I'm sorry I took so long to answer this yeah that's what it is the pink things are cute tips thank you brother
@thegeek2842
11 ай бұрын
Do more videos please
@real_gang961
Жыл бұрын
Hey brother where do you get you parts from
@eddieblcc
Жыл бұрын
Thanks for watching brother I usually get them from Michael's HobbyTown USA or Pegasus hobbies online they have lots of lowrider wheels and custom parts thank you for watching have a blessed day
@real_gang961
Жыл бұрын
You too
@papaoso6950
3 жыл бұрын
Should I just send u my car I have a 83 Oldsmobile level 4 1:26 scale
@eddieblcc
3 жыл бұрын
I got the same 84 kit I've never put hydraulics on one of these just give me a little time to look at mines to see how it's supposed to be done and then I'll give you an answer on that would more than likely I probably can build you one thank you brother I appreciate you
@NOTATTS
3 жыл бұрын
Wassup wit it bro? u sale these cars?
@eddieblcc
3 жыл бұрын
Yep if someone wants to buy one lol I'm Eddie bro nice to meet you ☺️
@NOTATTS
3 жыл бұрын
@@eddieblcc yeah bro I want to buy 1 or 2 do you have instagram?
@eddieblcc
3 жыл бұрын
@No Tatts eddie parotte.on ig
@charlesthomas7881
2 жыл бұрын
How much do you sell them for I would like to buy two of them
@eddieblcc
2 жыл бұрын
I just build them when I get time I don't sell them thank you for watching brother
@charlesthomas7881
2 жыл бұрын
How much would it cost to build one for me!!???
@SundaySmoke93
5 ай бұрын
yo Eddie blocc can you help me out ? I got a few questions I want to ask you brother
@bubba222
3 жыл бұрын
what do you mean by styrene q tips??
@eddieblcc
3 жыл бұрын
The Q-tips that I'm using are made out of plastic the same type of plastic is styrene
@bubba222
3 жыл бұрын
@@eddieblcc ohh ok thanks
@eddieblcc
3 жыл бұрын
@@bubba222 thanks for watching brother bubba
@bubba222
3 жыл бұрын
Ya no problem I'm just getting into building these lowrider modle cars and I think your very helpful and you have helped me alot
@eddieblcc
3 жыл бұрын
@@bubba222 ok im going to look for you and subscribe never give up the hobby after 40 Years of building these little things I still love them
@ivangonzalez032
11 күн бұрын
Mr eddieblcc how you been brother ?!?
@eddieblcc
11 күн бұрын
I'm good my brother thanks for checking on me how are you
@ivangonzalez032
10 күн бұрын
@@eddieblcc he’ll yeah man glad to hear from you 🙏🏼 i’m good as well bro i stay looking back at ur videos and just wanted to make sure you were good🏆
@eddieblcc
10 күн бұрын
@@ivangonzalez032 t thank you for the cool comment man you're awesome for this made my day
@ivangonzalez032
7 күн бұрын
@@eddieblcc of course man you the homie 🏆
@tjmmodelcraft8486
2 жыл бұрын
Kick ass man. Check out my cheech and chong van
@eddieblcc
2 жыл бұрын
Ok im on it
@chazzvonte4961
2 жыл бұрын
Do u have a Instagram page bro ?
@eddieblcc
2 жыл бұрын
No I don't brother thank you for watching man much appreciated 👍
@whotthat5067
3 жыл бұрын
Is there anybody that I can buy a kit all ready built off
@eddieblcc
3 жыл бұрын
Yes but builds are cheaper when you do it for yourself brother low rider nation on Facebook got a ton of builders thanks for watching brother peace
@OgKrazyNick
Жыл бұрын
🫵🏽 DA NEW KING 👑 EDDIE 22k 🤷🏽♂️
@eddieblcc
Жыл бұрын
Look up teen watts crip and you'll see me in my younger days on KZitem
@eddieblcc
Жыл бұрын
I'm wearing a blue flannel shirt and a raiders cap I was 15 there was a big documentary on young gang members
@OgKrazyNick
Жыл бұрын
@@eddieblcc Go to the video 1# go to share ⤵️ then 2# copy 👇🏽 link and then put a link to the video in the comment box! 🫵🏽 then go to write a comment press 3# paste and it’ll put the link to the video in the comment box 📦
@eddieblcc
Жыл бұрын
@@OgKrazyNick Sounds like a lot LOL
@OgKrazyNick
Жыл бұрын
@@eddieblcc Oh, I feel the same way about everything on the Internet, Eddie if people didn’t teach me I would’ve never figured any of this stuff out. It’s so difficult man!
@OgKrazyNick
Жыл бұрын
I am (krazynick) also watch how they try to steal my dodge challenger with the signal amplifier device on my real life platform. You will die laughing. It’s just insane.
@OgKrazyNick
Жыл бұрын
Check out my 62 in the thumbnail! kzitem.info/news/bejne/x5iQr5Vss2uZmXY 😮
@brucelee2941
3 жыл бұрын
Need sum advice if u can help
@eddieblcc
3 жыл бұрын
Sure what do you need brother
@brucelee2941
3 жыл бұрын
@@eddieblcc having trouble to geting my front setup just bought my Big Daddy Jackson's motors . It just gets stuck not to sure what I'm doing wrong got the back on point can't figure out the control arm new to the A arm hopperz.
@eddieblcc
3 жыл бұрын
@@brucelee2941 the motor is getting stuck because you didn't glue the springs down properly the front springs have to be set with glue on the bottom of the spring and then it'll it'll unlock the motor every time the car jumps my next video I'm going to explain all of that and how to set the front spindle where you put the wheel at it's going to be on the next video brother I'll do it in a day or two setting the spring right pulls the motor back into a free spinning motion I'm going to show you guys that on the video
@eddieblcc
3 жыл бұрын
I wish you could send me a picture
@eddieblcc
3 жыл бұрын
Do you have messenger?
@SpiritualWars
Жыл бұрын
Watch the whole traffic stop 🛑 50 minutes though Eddie and listen to what I say to the cop after I know that he let my wife goal and he’s not gonna try and take her to jail! 😮
@eddieblcc
Жыл бұрын
Watching it now!!!!!!
@SpiritualWars
Жыл бұрын
@@eddieblcc Remember I’m black ✊🏽Mexican or Latino so I know that Hispanic people hate us Black people bro worse than the KKK! My wife is from El Salvador, so I have inside information on how they really feel about us aside from what you see in the world and in the media, it’s even worse and deeper!
@SpiritualWars
Жыл бұрын
@@eddieblcc Here’s the story about them trying to steal my challenger kzitem.info/door/PLqq25BcYsDuazpMevK1IhmndfPciLH08j 4 times in one week last month. This made me not want to have a nice car ever again!
@eddieblcc
Жыл бұрын
@@SpiritualWars Well I don't hate you I dug yo style brother I'm a og from watts and even I don't talk like that but I feel you bro no disrespect
@eddieblcc
Жыл бұрын
@@SpiritualWars If you wasn't going crazy on that cop I don't think it would have been that bad bro you was going ham 😂
@chileyman2139
Жыл бұрын
@eddieblcc hey bro hope all is well first off much luv and respect to you and your channel thank you for all tips and content, do you have a actual “from start to finish “in a lil more detail” video on how to setup the hydros and the list of materials needed to complete the task, I was almost giving up on it but I said fuck that!! 😂😂I just copped a fresh ‘61 hardtop and i wanna build it hydros so if you can help me out brother in anyway it’s highly appreciated or point me in the right direction it’s all Luv💯and just subscribed to support the channel
@eddieblcc
Жыл бұрын
I got you bro coming soon I'm in the process of moving but I'm almost done I'll hook you up thank you for watching have a blessed day
@chileyman2139
Жыл бұрын
@@eddieblcc hell yeah!!! Likewise thank you
@SpiritualWars
Жыл бұрын
Watch how I lose it on the cop for trying to intimidate and harass me kzitem.info/news/bejne/sXtmvqN3nYt7ono
Пікірлер: 271