Learn how to DIY your own Cup Turner! This one is for two cups but can easily be modified. I go through it pretty quickly, so comment or reach out on Instagram if you have questions! For Tumbler Tutorials click here: kzitem.info/door/PLY1xNd7MWi5sdm13LW0yWxefpH06iLiCR
@ultraultra6726
3 жыл бұрын
Hey, the motor with the screw that keeps coming loose is turning the opposite direction of the other motor. If you change the orientation of the wires on the back of the motor, then it should turn the other way... which may stop the screw from loosening. Hope this helps!
@caitlincorrigan790
4 жыл бұрын
Watching now, but you know what I really like about your tutorials ? They’re short, sweet, & to the point. I am subscribed. Thank you!!!!!
@AlisonCrafts
4 жыл бұрын
Thank you for subscribing! I'm so glad you like the videos 💕 no one has time to comb through and hour long tutorial lol!!!
@boomersdad
3 жыл бұрын
You should be able to replace the pvc cap and pvc arms with standard size pvc. Also try a little loctite on that screw.
@carmenmendiola5163
4 жыл бұрын
You can use a cap of the size of pvc and drill a hole and use an M5 screw to attach the cap to the motor.
@roxannpatzman2703
3 жыл бұрын
I agree with the other posters, I love your tutorials! It's nice to have someone who's concise, and straight to the point. Thank you.
@AlisonCrafts
3 жыл бұрын
Thank you
@Shazian_Fleur
Жыл бұрын
Great tutorial...I know you're in the U.S. and we have different amazon and stuff from you....but just linking stuff makes it easier for me to find it here. I've never done a tumbler turner but I'm interested to make my own. Thank you so much! LOVED the entire video. Cheers :)
@kellymaldia128
3 жыл бұрын
I figured out the cap problem not fitting 1/2” pvc pipe. I bought 1/2” caps from Home Depot. I drilled a hole in the center to fit in the end. Now I can use 1/2” pvc pipe.
@lindatorres-lopez8306
4 жыл бұрын
Thank you for sharing this tutorial. It’s been the most simplest I’ve ever seen on making a cup turner. Definitely something doable.
@AlisonCrafts
4 жыл бұрын
Totally doable!
@christiniaholcomb2615
4 жыл бұрын
I changed mine to a 3/4 inch CPVC and just used the flat end caps.
@TheBeardedUber
3 жыл бұрын
The screw that keeps coming loose, I would recommend Threadlock. Cheap bottle of blue stuff that will hold the threads in place. its the reason that Store bought products are so difficult to take apart.
@NapperFamily
4 жыл бұрын
The blue caps that the wands connect into can probably be replaced with pvc caps that are threaded. I did that with the turner bought from amazon so I could make it extra wands to change out.
@valynn221
2 жыл бұрын
Thanks for sharing getting ready to order mines now 😊
@teaninigeorgette8564
Жыл бұрын
Thank you so much :) Happy new year :)
@kimramsdale5088
3 жыл бұрын
Thank you so much for your tutorials, they are very easy to follow thank you 🙏🏼🇦🇺
@AlisonCrafts
3 жыл бұрын
THanks for watching
@suestayton3482
3 жыл бұрын
I like this idea. Thanks so much for doing this tutorial.
@AlisonCrafts
3 жыл бұрын
Thanks for watching!
@adijat7508
3 жыл бұрын
I'm deliberating making a 4 (or even 6!) Cup turner. I'm scared, but I may need to go for it. My one cup turner isn't enough
@AlisonCrafts
3 жыл бұрын
do it!! It will be so nice to have a lot of turners!
@adijat7508
3 жыл бұрын
@@AlisonCrafts I'm nervous, but I think I'll try! A 4 cup one. Need to find decent lumber at a good price
@user-pz1ve1jb5s
Жыл бұрын
I suggest you put a lock washer to prevent the screws from coming off.
@adijat7508
4 жыл бұрын
Omg, you're teasing me with the HP book tumbler in the video. Need that tutorial yesterday! Haha
@AlisonCrafts
4 жыл бұрын
soon!!!
@alfkey4155
2 жыл бұрын
Hi Alison, Hello from the UK , yours is not the first tumbler turner channel that have made this request ,that said, @4:09 , I have purchased this same motor ( AC 100 -127v ) I'm a wood turner and I need to make a motorized turntable , with said motor , wired it up left it running while I found the grub screws and Allen wrench got back it was over heating , it was rather hot , the problem maybe the voltage (UK mains electric runs on 240 volts ), any help would be appreciated,,. Stay safe,. Regards Alf
@carolhorne4981
4 жыл бұрын
You could put lock tight on screw and it would not keep coming loose
@AlisonCrafts
4 жыл бұрын
I used E6000 and it came loose. Ugh. I will try loctite!
@michelledriscoll9133
4 жыл бұрын
I'm pretty sure that motor can spin either way.. you may be able to grab the arm and switch the direction to keep the screw from unscrewing
@AlisonCrafts
4 жыл бұрын
It has been helping to only have it spin towards the right so the screw doesn't get loose while spinning!
@Zooyorker-sx2ne
2 жыл бұрын
Personal opinion…I watched the video on the globeous and was holding out to buy that…however I would like a mult spinner (I just planned on buying more globeous singles)….what do you think? I know there were several reasons you liked the globeous…space, 2 way direction spin, etc
@roberthollis11
Жыл бұрын
Nice job
@chrisgreco4834
3 жыл бұрын
Use blue loctite for the screw that keeps getting lose.
@AlisonCrafts
3 жыл бұрын
Thank you! I'm glad to hear you recommend it, i just bought some last week LOL!
@coryransdell6000
3 жыл бұрын
Use BLUE LOC TIGHT on any screws that come loose..it will keep them from coming loose but you can also take them off if needed
@AlisonCrafts
3 жыл бұрын
Thank you! I just got some to add !
@douglashersom5128
2 жыл бұрын
Does the screw you tightened with the wrench and screwdriver you said kept coming loose hold the piece that the tube slips into? If so you could use a piece of half inch or 3/4 inch PVC and end caps for replacement rods.. just drill a hole in the center of a cap and the PVC pipe will slide right into it.
@chrispainterguy6525
3 жыл бұрын
The side that comes loose is reversed polarity .it spins the opposite direction so it comes off.simply switch the wires around on that motor....
@Multiplemom3452
2 жыл бұрын
Where your screw keeps loosening take it out and put some kind of glue or adhesives behind it.
@02Huntet
Жыл бұрын
darn the motor setup kit is no longer available on amazon
@RadicalXpressions
8 ай бұрын
How do you make this without purchasing the motors?... Like make the motors from something else like a clock or something?
@AlisonCrafts
8 ай бұрын
I’m not sure, but they’re pretty cheap now to just grab on Amazon! amzn.to/42dHnxl
@shadowhenge7118
3 жыл бұрын
Try putting some thread lock on that screw that keeps working out.
@hplowe
2 жыл бұрын
Do both motors plug into the one side together? So in parallel?
@nathanhomer326
2 жыл бұрын
What were the measurements you used to drill out the holes with the spade bits?
@doycebrimmage6865
2 жыл бұрын
The link you provided for the motor kit is not correct.
@mikel4510
3 жыл бұрын
Less than $30? Amazon has several for that price.
@keliwoodall9710
2 жыл бұрын
I have a question... do you know how I could obtain a replacement for the hobby lobby's single cup tumbler maker Turner arm screw all I see is long screw, it don't even have a name all I see is "long screw"?
@keliwoodall9710
2 жыл бұрын
And also I would very much appreciate it if you could see about the other parts of the your DIY Tumbler Turner please. Thank you Kindly
@stoots1000
3 жыл бұрын
Do these spend all the way around? Or stop and reverse?
@justinellis4642
2 жыл бұрын
Change the direction of the one motor that’s unscrewing
@romaldstewart7262
2 жыл бұрын
Link for motor kit on amazon?
@alexandrianicodemus137
3 жыл бұрын
Where is the link to the spinner you bought off Amazon. I am not able to make one myself right now
Sorry if I missed it, but did you include a link for the tumbler turner you said you bought from Amazon?
@AlisonCrafts
3 жыл бұрын
amzn.to/3AV2sxt
@bethwinger6457
3 жыл бұрын
Thank you!
@jennifermalone6083
3 жыл бұрын
What are you using to hold your cups, are you using footballs?
@AlisonCrafts
3 жыл бұрын
I use foam but going to transition to 3D printed inserts! The foam is listed here under tumbler tools www.amazon.com/shop/alisoncrafts
@jeffreycanfora1091
Жыл бұрын
I’ve had the same question for a week with all kinds of search results with no leads or ends. The ones on Amazon are currently unavailable. Is there anyway to get the link to 3D print them? Please, thank you 😊
@joshuawoods7699
3 жыл бұрын
add a little blue lock tite.
@joyceorrick9045
Жыл бұрын
Think I’m going to the dollar tree. For. A cup turner it’s 5 bucks 😊
@AlisonCrafts
Жыл бұрын
This video is old, there weren't as many options as there are now! Definitely super easy to find one to buy, just read some reviews first :)
Пікірлер: 67