These are very cool, I like how you can custom make whatever you want instead of buying what the store happens to stock, and these are very professional looking, I like how you took the time to get them perfectly centered, a detail that eludes some.
@MakeTechCreate
5 жыл бұрын
Thanks, Colin ... let me know if you want some.
@MakersGottaEat
4 жыл бұрын
Glad I found your channel. Your videos are very well done. One of the better channels on YT for laser howto.
@MakeTechCreate
4 жыл бұрын
Thank you and thanks for watching!
@MarkusMahlberg
3 жыл бұрын
Thin your paint a bit with water. You might need a second coat, but the finish will be much nicer.
@MakeTechCreate
3 жыл бұрын
Thanks for tip and thanks for watching!
@MarkusMahlberg
3 жыл бұрын
@@MakeTechCreate Thinning your paint with water is for acrylic paint only, of course.
@lizarrrdbeth
2 жыл бұрын
Great video. Great tips.....thx! Fun hobby....I'm obsessed!!
@MakeTechCreate
2 жыл бұрын
Glad you enjoy it! Thanks for watching!
@Jacbean10
Жыл бұрын
Thanks. Nice video!
@MakeTechCreate
Жыл бұрын
You're welcome 😊
@Silent-G
2 жыл бұрын
How durable are these coasters? Do they smudge when they get wet.
@robwgeorge
2 жыл бұрын
Those look great. Thanks!
@MakeTechCreate
2 жыл бұрын
You're welcome!
@oldelibertystructures5401
Жыл бұрын
Do you have a video of burning multiple coasters at a time with the same logo?
@MakeTechCreate
Жыл бұрын
Sorry, no, but that's easy enough to setup in a program like Lightburn. I'd cut a plywood jig to hold them all in the same place every time.
@Dancopymus
2 жыл бұрын
Very cool! What kind of paint did you use? Can spray be used? Instead of cork, I would use mdf. P.S. Is it possible for you to share the file you used to make the Plastic Template? Thanks
@Bill.L.Carroll
4 жыл бұрын
I've been looking at the 2.5 and the 5. This isn't bad at all. 👍🏽 I just need to engrave A3 and A4 wooden books.👌🏽 2 for one deal... Coasters and frisbee's 🤣🤣🤣
@MakeTechCreate
4 жыл бұрын
Ya, for the price, they're nice machines. If you're looking mainly for cutting, get the 5w, for engraving the 2.5 is better. Also, you'll what to add an air assist as it will give you deeper, cleaner cuts.
On the un painted coasters, how deep is the engraved part of the coasters? Is it noticeably burnt down in slightly or is it completely flush with the non-engraved part and smooth?
@MakeTechCreate
Жыл бұрын
It's not deep but you can feel the engraving. Cork seems to be hard to get a deep engraving into.
@TheDwilliams1000
3 жыл бұрын
Where do you get the coasters from?
@nerio1975
2 жыл бұрын
I’m new in the world of laser engraving/cutting, what’s that net and what recommendations you have for a newbie like me?
@MakeTechCreate
2 жыл бұрын
There's a lot of different machines available these days. It really depends on whay you want to engrave or cut.
@nerio1975
2 жыл бұрын
@@MakeTechCreate i bought the txool d1, I want to buy a mat or something that I can use as a base, like a self healing mat (I’ve seen several people using those) or like in the case of this video, a special metallic mat (or something like that), would you guide me about it?
@rifqiala5553
3 жыл бұрын
did you cut the perfect circle by yourself?
@MakeTechCreate
3 жыл бұрын
I just bought the blank coasters at discount at my local dollar store
@jaymo2511
2 жыл бұрын
Can you legally sell those? Or do you just give away to friends and family?
@MakeTechCreate
2 жыл бұрын
Personally, I don't sell any of them. I just give them out as gifts, like you said.
@makersfab
5 жыл бұрын
Nice bro...
@MakeTechCreate
5 жыл бұрын
Thanks for watching!
@Michael-lo3ht
5 жыл бұрын
I know you time-lapsed through those. But about how long do those take on an average?
@MakeTechCreate
5 жыл бұрын
About 15-30 minutes with a 2.5W Diode laser. A good CO2 laser would greatly decrease the time, though. Thanks for watching.
@schlotdoglaser
3 жыл бұрын
@@MakeTechCreate I agree. I have a Co2 and it takes about 2 mins. per coaster
@paulrackouski6609
4 жыл бұрын
Where do you find the files you load into the program??
@MakeTechCreate
4 жыл бұрын
For these coaster I just used raster images I found online and imported them in T2 Laser. Thanks for watching!
@TheDwilliams1000
4 жыл бұрын
I wanna learn how to laser engrave coasters. Where can I get bulk coasters like this?
@schlotdoglaser
3 жыл бұрын
Amazon......30 coasters for $9.90
@nikburton9264
4 жыл бұрын
Anyone know of any books one might read to learn about laser cutting?
@MakeTechCreate
4 жыл бұрын
I'm not aware of any books. Most people learn from KZitem videos and Facebook groups. Thanks for watching!
@mikevolkin2954
4 жыл бұрын
what laser do you use?
@MakeTechCreate
4 жыл бұрын
I used a 2.5 watt Elesklaser in this video. But I'm running a 50watt CO2 laser now.
@SuperTelevideo
4 жыл бұрын
Hi. whats is your laser name and model? Thanks
@MakeTechCreate
4 жыл бұрын
It a 2.5 watt EleksMaker Elekslaser A3. Thanks for watching!
@ashokhanni8863
2 жыл бұрын
Paint link
@TheFlyingKiwiNZ
4 жыл бұрын
Don't forget to soak the cork first!
@robevans8555
3 жыл бұрын
Why? Genuine question
@TheFlyingKiwiNZ
3 жыл бұрын
@@robevans8555 look up 'soaking cork' on KZitem. Comedy innuendo
Пікірлер: 51