DIY SEALED SUBWOOFER BOX BASS TEST AND DEMO - kzitem.info/news/bejne/tIloqWZ4bmSdomk
@User6701k2
4 жыл бұрын
I love ur work brother from India ❤️✌️🙏
@ellisyadav1179
4 жыл бұрын
Thanks sir
@CHRISB-cb5to
4 жыл бұрын
Do you make enclosures to order? I have been searching for a 2x 10 or 12 ported enclosure for a 2016 Chevy Silverado double cab. Or possibly 1 single 10 or 12 ported to utilize the entire underneath of the rear seat. Thanks for your time , and love your videos.
@chrclmnky
4 жыл бұрын
@@CHRISB-cb5to Hello Chris, yes these subs I'm building are orders from clients here in the Philippines. Thanks for the feedback.
@Suresh.v608
4 жыл бұрын
Wer s Air holes
@reinhardtmaritz7654
4 жыл бұрын
Love these pioneer subs with the integrated basket. Affordable, look good and perform really well 2 of these in a sealed box would be great
@davinchi2496
2 жыл бұрын
Nice and quick. All you need is full blown woodworking shop and all of the tooks
@chrclmnky
2 жыл бұрын
Yes i agree thanks
@diyexplorer8728
4 жыл бұрын
Impressive speaker box right there.
@葉蛇
3 жыл бұрын
Yes it easy to make because you have tools to deal with. You are professional. Great.
@chrclmnky
3 жыл бұрын
yi
@magnuswf
4 жыл бұрын
Nice box, and nice detail to router the edge of the endpieces, so you can hide the cloth in there. But I think it would look even better, if you had countersunk the sub, so it is flush with the surface :) and maybe tighter seal around the lip.
@chrclmnky
4 жыл бұрын
Thanks for the feedback. :)
@edwarddemesa4630
4 жыл бұрын
Nice wedge type 👍
@onkarsharma1639
4 жыл бұрын
Your's works is loving ♥️💐👨
@chrclmnky
4 жыл бұрын
Thank you so much Onkar. 😀
@aaronjohnvillegas7363
3 жыл бұрын
Work of art 👍
@chrclmnky
3 жыл бұрын
🌞😎
@carlosesparzavazquez4753
4 жыл бұрын
Nice looks good and clean . Nicer than what the stores offer
@chrclmnky
4 жыл бұрын
Thanks for the feedback Car-litos.
@74midwestbass74
4 жыл бұрын
NICE VID BRO!!!
@chrclmnky
4 жыл бұрын
Thanx!
@santhoshs4845
3 жыл бұрын
Pioneer masss 🔥🔥🔥🔥🔥🔥🔥
@user-mu8mr3us2n
4 жыл бұрын
Работа в удовольствие 👍
@chrclmnky
4 жыл бұрын
Thanks
@DIYAudioGuy
4 жыл бұрын
I enjoy your videos, the music and edits are very Zen.
@chrclmnky
4 жыл бұрын
Thank you for the feedback, DIY Audio Guy. :)
@ufcker915
3 жыл бұрын
That song playing in the background is stoopid nice..
@chrclmnky
3 жыл бұрын
yuh it iz
@TheBlackz05
3 ай бұрын
Hi, i would like to fit a kenwood KFC-PS3016W subwoofer (12 inch) into a small ported box and then into a hatchback... how much would i lose by severely undersizing the box? Would it end up sounding horrible? 1st time attempting to build a box, always had pre-fab boxes. Thank you.
@chrclmnky
3 ай бұрын
Hello, undersizing the box actually maximizes the output but also heightens the tuning . That is what most SPL guys doing: Undersize the box OR oversize the port to achieve higher tunings (around 45-55Hz tunings) but very loud.
@TheBlackz05
3 ай бұрын
Thank you very much for clearing this up... i was quite worried its gona end up sounding bad. Im gona go ahead and use an undersized ported box 😊
@mszeitgeist
4 жыл бұрын
Please share the measurement of this sealed subwoofer box.thanks
@speedpros
2 жыл бұрын
You did a good job but you didn't show how you created the angle cuts on the wood, I mean what was this video
@chrclmnky
2 жыл бұрын
Hello, angled cuts are a bit tricky. Here's another video of mine showing how it's done. kzitem.info/news/bejne/l4iQy3qMbmh6n4o
@JorgeMendezTol2
4 жыл бұрын
Super execele contenido,🎬📽️🎬 wuauuuu!!! 👌🚀Sigan así🚀 y saludos👍😃 desde zapopan jalisco México 😄🙋♂️
@BLICKBEANZ
4 жыл бұрын
I need a friend who can make something like this
@YuriTaard
3 жыл бұрын
Or you could buy one 🤔
@Leon-oz4uf
2 жыл бұрын
@@YuriTaard a friend?
@YuriTaard
2 жыл бұрын
@@Leon-oz4uf Yes. I hear all good audio stores stock friends now.
@Leon-oz4uf
2 жыл бұрын
@@YuriTaard 😂
@vikram6586
3 жыл бұрын
Maine apna ek handmade speaker bnaya h cpu cabinet m vo project ko aap aur bhi update karke lagbhag 3000 around bech sakte h mere liye vo abhi affordable nhi h or m apna project spoil nhi krna chahta usme 2 satellite or ek woofer lga hua h saath m tda 2030 based amplifier with cooling fan lga hua h bluetooth aapko lgana padega uski sound m distortion nhi h tej karne p bhi clear aati h
@Badassvidsz
4 жыл бұрын
Your hands are gold :-)
@chrclmnky
4 жыл бұрын
That's new. Thanks for the gold feedback.
@Badassvidsz
4 жыл бұрын
You are much welcome dude and have very pleasant hi-fi and not only Christmas Holidays { Christian or not it doesn't matter } Greetings from Greece :-)
@marciodasilvalima7105
4 жыл бұрын
Parabens pelo belo trabalho
@chrclmnky
4 жыл бұрын
Thank you Marcio.
@SOBR_19
4 жыл бұрын
Красавчик красиво сделал
@user-zh7eo2ul2v
4 жыл бұрын
Very neatly job! 👍 Box made perfect! 👍 But this subwoofer very very low quality driver! Because this Woofer have very high Fs 46,fantastic high Qts 1.04 and very heavy Mms 123 gr.!!!!!!!😣☹️😞🙁!Very poor Driver!😟😞🙁👎👎👎👎 MR..next time use perfect bass woofer - Seas h1192-08 cd22rn4x, this Woofer have size only 8.5"!!!Very little, but have very low Fs 20 Hz,and Audiophile level Qts 0.24!!!Have very light Mms 41-42 gr.!Amazing woofer!👍👍👍👍👍👏👏👏👏👏But need use two passive radiators tuned 14-16 Hz,because this amazing little woofer have big VAS 108 L. Two passive radiators need for balance diffuser...
@adam_1dizon121
4 жыл бұрын
another good one bro..
@babeyouze
4 жыл бұрын
I feel it, they're coming. "WHERE IS THE PORTTTT"
@chrclmnky
4 жыл бұрын
😂
@jimboyechavez1987
3 жыл бұрын
akong gipang download imong mga video idol nindot kaau tan.awon....❤️❤️✌️✌️
@Joey231610
4 жыл бұрын
Quick n easy all you need is 5000 dollars worth of tools for a 60 dollar box
@chrclmnky
4 жыл бұрын
Yes you are absolutely correct Joy Mermaid. How are the seas and the oceans today?
@therealxree1755
4 жыл бұрын
I love watching your videos. They’re so satisfying
@chrclmnky
4 жыл бұрын
Thanks. :)
@laineribeiro2192
4 жыл бұрын
Nice grapichs broo
@chrclmnky
4 жыл бұрын
Thanks.
@thisisroy1893
3 жыл бұрын
No pongas música de fondo, el simple sonido de tu trabajo relaja tanto
@chrclmnky
3 жыл бұрын
Ok thanks for the advice Roy. Helps a lot.
@user-gt4pc2fk6y
4 жыл бұрын
What are the benefits and reason for putting cotton or wool inside the amplified box
@chrclmnky
4 жыл бұрын
Please read other previous comments. Thanks.
@bisayakoyvlog1333
4 жыл бұрын
Ang liit ng box
@mmittal422
3 жыл бұрын
Bro u r great
@chrclmnky
3 жыл бұрын
Thanks Mohit 🤘
@XxTrustNoOnexX
4 жыл бұрын
SQ box 👌
@BrewdClutch
4 жыл бұрын
Not really Q is 1.3.!!!
@JoseRoberto-cp9qq
4 жыл бұрын
Ficou legal em gostei
@harjotkhatrao6942
3 жыл бұрын
Little spark in subwoofer and the box will be on fire 😂😂
@preetlehal5614
2 жыл бұрын
Aaag lgaa di bhai
@IrshadIrshad-li5zp
4 жыл бұрын
Good work 👌
@chrclmnky
4 жыл бұрын
Thanks ✌️
@TattooHustleOfficial
4 жыл бұрын
Grinabe yo 👌🔥🔥🔥
@chrclmnky
4 жыл бұрын
😊
@edud8452
4 жыл бұрын
Very nice your boxes always turn out great! what program are you using for box designs? I use a program called Cutlist Optimizer to lay out all my cuts on a 4×8 sheet it is awesome i hardly have any wasted wood.
@chrclmnky
4 жыл бұрын
Thanks Eric. How I wish I could afford a CNC machine and a huge place for it. I use several programs but right now I am loving BassBox Pro 6. It gives out accurate calculations.
@fernandoperilo28
Жыл бұрын
very nice!
@chrclmnky
Жыл бұрын
Thanks a many, Fernando. 🤘😎☀️
@gewilrepa
4 жыл бұрын
Hello friend, a query, because it presents the fabric inside the box. what is the function of the fabric
@chrclmnky
4 жыл бұрын
Hello Elmer, poly fiber fill makes the box appear "bigger" to the subwoofer, lowering the overall resonance frequency.
@gewilrepa
4 жыл бұрын
@@chrclmnky Excellent. Thanks friend for your quick and efficient response. I'll keep watching your videos and of course learning.
@dumitriuvlad4818
Жыл бұрын
great work !! what's the song in the video?
@chrclmnky
Жыл бұрын
Thanks. Tracks are in the video description
@dumitriuvlad4818
Жыл бұрын
@@chrclmnky i think you missed adding the track for this video because it's not in the video description. please give the track id
@bilalkafeel9666
4 жыл бұрын
Good man👍👍
@grimlord5654
4 жыл бұрын
kung makaon pa; lamia sa mga toolz ni bossing oi.
@chrclmnky
4 жыл бұрын
Matsalams sir. ;)
@ssempijjaabra9732
2 жыл бұрын
So nice
@chrclmnky
2 жыл бұрын
Thanks
@waqaraskari2365
4 жыл бұрын
Good sir💯👍
@nkm99channel73
4 жыл бұрын
Anjai alat nya canggih semua coba kalo di bawa ke indonesia pasti bisa viral di kabupaten ku
@just_venky9394
4 жыл бұрын
Bro no air hole ..does it hurts the spkr and it's performance
@chrclmnky
4 жыл бұрын
Sealed boxes are actually good for subwoofers.
@brayanphyyytt444morales5
4 жыл бұрын
Muy buen video bro cual es la app para sacar las medidas de un cajon
@chrclmnky
4 жыл бұрын
Thanks for the feedback sir. The app is tinkercad. You can copy and edit the same layout and design. There is a link in the video description.
@imranpasha4900
4 жыл бұрын
You have not left air hole
@Fire0101011
4 жыл бұрын
Do you have to fill it up .. how does that help ??
@chrclmnky
4 жыл бұрын
Hello Richard, the polyfiber fill makes the "bigger" to the subwoofer.
@CheekyAquarius
2 ай бұрын
Thanks for your video. I’m a First time box builder with a jig saw and hand sander, no table saw, chop or miter. Anyway to help keep the cuts straight? Also, thoughts on Mdf vs birch ply? Same price for me locally for a 2x4 sheet. I’m making a 1.0 cube sealed box for a single Dc 12”
@chrclmnky
2 ай бұрын
If mdf is same cost as birch, then go for the birch. Mdf here in the Philippines is very cheap by the way while high grade plywood are a luxury. Get a straight edge and use it as guide against the jigsaw. You might want to screw down halfway that wooden straight edge guide.
@TruthTree-ls5ii
Күн бұрын
Get table saw, is the best saw.
@Tevin254
2 жыл бұрын
Hi.....I bought pioneer 314d4 I'm planning on using it at home......any ideas on cabinet design whch will give me good bass.
@lemniscate2218
4 жыл бұрын
Amazing
@sigitsantoso7890
4 жыл бұрын
keren bang, , , ,pengen bisa buat gitu bang
@chrclmnky
4 жыл бұрын
Yes you can. 😇
@jerrygonzales2860
4 жыл бұрын
Saan po pwede ikabit ang sub woofer sa amplifier? Unit ko po ay sakura av-5ub. Ang gagamitin ko na sub ay galing sa aiwa component.
@elsaoliveira1280
4 жыл бұрын
Ficou top
@trev815
4 жыл бұрын
Love watching you work ! Any advice on a box and sub which can be super slim ? I hav a powered space saving sub in my van at the min but need more bass so would like to have a proper sub again but space is very tight to get ample cubic feet ! Would probably hav to be an 8" too 👍
@chrclmnky
4 жыл бұрын
Many thanks for the feedback, trev815. To get the slimmest box, would be sealed. This one is sealed too, and the box is the smallest I can build. But output still huge.
@RileyRides
3 жыл бұрын
Why does the sub box get filler will fluff?
@chrclmnky
3 жыл бұрын
To make the box appear bigger to the sub.
@RileyRides
3 жыл бұрын
@@chrclmnky ok thanks
@turebekreymov3981
4 жыл бұрын
Good man
@idontcaresapo8233
3 жыл бұрын
I thought you can touch the filling with the sub since it can get trapped in the motor of the woofer. Is that true? I'm thinking to the same
@chrclmnky
3 жыл бұрын
That is just a theory.
@mustseenow991
3 жыл бұрын
if I dont have carpet could I wrap my wooden sealed subwoofer box with soundskin/dynamat/automat material instead? Would that improve sound?
@chrclmnky
3 жыл бұрын
Carpet does not improves sound. Just for aesthetic.
@drrckhamilton
4 жыл бұрын
Do the nails hold the enclosure together well without any problems? What about a heavy duty subwoofer?
@chrclmnky
4 жыл бұрын
Glue and pin nails are good for boxes with subwoofers having a power up to 1000w RMS. More than that should be of some industrial strength materials.
@amthanhkeokeo92
4 жыл бұрын
Hello in Vietnam
@chrclmnky
4 жыл бұрын
Hi. From the Philippines
@amthanhkeokeo92
4 жыл бұрын
@@chrclmnky Mr linh, âm thanh kẹo kéo
@feedthemachine99
3 жыл бұрын
Do all sealed boxes need that much fill.I have a sealed 12 with probably a 1/4 of that fill.?Good vid btw!
@chrclmnky
3 жыл бұрын
I think I over filled it. 🙁
@feedthemachine99
3 жыл бұрын
@@chrclmnky LOL,thanks .
@peterlallas1326
3 жыл бұрын
When you put that last section on the side why didn't you make it go flush with the rest of the box instead of like a insert, just curious. Wouldn't air escape that unless it went against the other boards?
@chrclmnky
3 жыл бұрын
@@peterlallas1326 box is coated with rubber cement so no leaks. Also sealed all the seams inside the box.
@_Thale_
4 жыл бұрын
The wiring connection to the sub please specify how you did it these dual Vcoils can be confusing
@chrclmnky
4 жыл бұрын
Just parallel wiring to get a 2 Ohm final impedance.
@josegaribay9962
2 жыл бұрын
Bro all that work and you don’t test it out for us I was looking forward to hear it bump 😔 fail
@chrclmnky
2 жыл бұрын
Here's the test - kzitem.info/news/bejne/tIloqWZ4bmSdomk
@maksrassi
4 жыл бұрын
Awesome work dude! Question: is it necessary to fill up the box with cotton?
@chrclmnky
4 жыл бұрын
Thanks for the feedback. The polyfiber fill will make the box "bigger" to the subwoofer so low frequencies will be produced lower than the initial box tuning.
@LexiconDevil
4 жыл бұрын
I wouldn't reccomend polyphil if you have a high end sub, they tend to heat the coils by a lot, I added some to my box (sealed) and it sounded pretty good but my sub was way hotter than without the phil
@chrclmnky
4 жыл бұрын
@@LexiconDevil This sub is not high end. It's low end. Has 47Hz Fs and a QTS of over 1.15. So must fill something to lower the overall tuning a bit.
@LexiconDevil
4 жыл бұрын
@@chrclmnky I know that sub, one of my favorite lower end ones, I personally have the diamond audio hxp124, and I was curious to see if polyphil would help it, but it got so hot to the point where the dust cap is untouchable, so I had to remove it in order to get it running again, take note that I only got like 2 layers of it around the walls of the box so it wasnt that much
@maksrassi
4 жыл бұрын
Psychedelia not sure what you mean by “high end”, but my sub is Pioneer TS-310S4.
@bokrard
3 жыл бұрын
Nice one sir! Kapag sealed box po ba kailangan ko gumamit ng subsonic filter? DS18 SLCMD12.4 D 250w RMS po sub ko then naka set ang gain ko ng 22.3 Volts lang gamit multimeter. Amplifier ko naman po ay LL Mono 1000w.
@bharatprajapati503
4 жыл бұрын
Super
@arturomendoza236
3 жыл бұрын
Hey I have a pair of these in a pickup with a separeted sealed box ( because of few space)with a 1000w amp 400 rms, but I think is not enough, I dont know if is because they need a ported box or should I change the amp?
@chrclmnky
3 жыл бұрын
These subs bumps, might need at least 2kw rms amp for a greater headroom for burps and bumps. Also, ported box will give justice.
@Simelmunduiyaapnasong5530
3 жыл бұрын
Kimat kitna hai babu ji ...good morning
@fatihakay8200
4 жыл бұрын
Congratulations. Good workmanship. What are the dimensions of the box?
@chrclmnky
4 жыл бұрын
Hello Fatih, check in the description for the link to Tinkercad layout and design. Thanks!
@Drzycimoos
3 жыл бұрын
I have this speaker and it's not so good Am plug him to 200 Watts RMS amp and the voice coil burning after 1 hour listening bass music. Not maximal volume!
@chrclmnky
3 жыл бұрын
That's because your amp is too weak. You must hook this up to at least 1000w amp.
@daggieboitv9193
3 жыл бұрын
Boss.. yn ba ung deep bass na 2nog? Ok rin ba pag serries gamit pg deep bass?
@peloteroification
4 жыл бұрын
Dude, you should make a copy of the jl audio H.O. enclosure.
@chrclmnky
4 жыл бұрын
Tell me more about that enclosure.
@junaidgt90
4 жыл бұрын
Dude how did u find this amazing sub in NEW condition? Im a big fan of this sub that im using since more than 5 yrs
@chrclmnky
4 жыл бұрын
Yes they're very durable and built like a tank. And can produce serious bass. This and big brother 311d4 still available on online flea market here in the Philippines.
@abhishekjohari7328
2 жыл бұрын
I purchased sony d40 from flipkart in big billion day and the subwoofer box is little broken from bottom side Should I replace it or its okay no problem
@chrclmnky
2 жыл бұрын
No should not be broken. Output will be different. You should have it replaced.
@abhishekjohari7328
2 жыл бұрын
@@chrclmnky subwoofer box means wooden box Can I get ur email so that u can see pic and reply accordingly please
@achu__mnr2542
3 жыл бұрын
Bro place evida
@nguyenquang1670
4 жыл бұрын
👍
@ortiztaxi1055
3 жыл бұрын
What type of wood did you use and what are the other materials for the box that you used? Such as the glue and the inside for the sound barrier aswell the wire connectors?
@chrclmnky
3 жыл бұрын
Hello Heriberto, the wood is just an MDF.
@ortiztaxi1055
3 жыл бұрын
What do you mean? Sorry I am confused. I am a mechanic and mainly a do-it-yourselfer when it comes to automotive. I prefer to make my own box and install it myself then pay an arm and a leg for someone to install it.
@satidog
3 жыл бұрын
@@ortiztaxi1055 en.wikipedia.org/wiki/Medium-density_fibreboard It's cheap and available at any lumber place. Even most high end speakers are made from MDF.
@maykolcerronlagos5068
4 жыл бұрын
Hola cuales son las medidas de esa caja ?,¿suena bien¿ , no es mecesario que la caja sea mas grande?.
@chrclmnky
4 жыл бұрын
Hello Maykol, the size was calculated to perform its best. Look into the video description for the link to Tinkercad. It has the layout and design. Thanks!
3 жыл бұрын
Top muito profissional!
@chrclmnky
3 жыл бұрын
Many thanks to you Alecio.
@fx4.alvxr_
3 жыл бұрын
Wich is better sealed or ported?
@chrclmnky
3 жыл бұрын
Ported
@fx4.alvxr_
3 жыл бұрын
@@chrclmnky wait and if I have only 200w RMS it will be any good? (Sorry for bad English)
@chrclmnky
3 жыл бұрын
@@fx4.alvxr_ actually the sealed boxes need more amp power. Ported needs less so you're good
@fx4.alvxr_
3 жыл бұрын
@@chrclmnky oh ok thanks for info
@RichardTakacs
Жыл бұрын
Hello, I need help, which is the best box for the pioneer ts-w304r speaker? Or could you show and tell?
@chrclmnky
Жыл бұрын
You can copy this
@user-kf7gj1eb2s
4 жыл бұрын
Супер)))
@mjshow17
4 жыл бұрын
sir pwede rin ba to pang bahay ipapartner ko sya sa edifier r1700bt?
@zmagsi
4 жыл бұрын
Why you fill the box with cotton?
@chrclmnky
4 жыл бұрын
To make the box appear "bigger" to the subwoofer.
@gamingwithsunny6554
4 жыл бұрын
@@chrclmnky cotton name and price
@redpix3264
3 жыл бұрын
Question: Are the nails more or less efficient than screws? Asking because in doing my research to build my on box, I read that screws would be better. Thanks
@chrclmnky
3 жыл бұрын
Small box = nails be fine
@redpix3264
3 жыл бұрын
@@chrclmnky Thanks!
@devidayalravbauddhajee466
3 жыл бұрын
Nice
@chrclmnky
3 жыл бұрын
Thanks
@respectedsir1570
4 жыл бұрын
I want same box and if the cottons gets inside the coil area will it burn ?? Any idea is it safe
@chrclmnky
4 жыл бұрын
No it won't get inside the coils. Don't get too crazy about stuff.
@ni3walia315
3 жыл бұрын
Really soo cool , i have also sealed enclozer . Why u put cotton in the box ?
@chrclmnky
3 жыл бұрын
I like the ghosts inside the box more comfy.
@salvegeral7393
3 жыл бұрын
in Brazil we have a technique to have more serious we use the cotton maze
@chrclmnky
3 жыл бұрын
nice
@akolngto9314
3 жыл бұрын
@@chrclmnky so, boss pwd seguro gapas sa doldol no? Hehhe kay in ana man si ilaha dw
@chrclmnky
3 жыл бұрын
@@akolngto9314 oo pwede ra man. Para mas barato kanang polyfiber sa unlan.
@dubailife781
4 жыл бұрын
Grupo kalmado hehehe
@brunogonzalez8525
2 жыл бұрын
what bit to use on the sides?
@ganeshrajan9271
4 жыл бұрын
Hey, need some advice... I have Sony STR-DH790 AV receiver, which is having 6-16Ohms output impedance, but I have a subwoofer of 4ohm.. can I connect it.. or is there way to make 4ohm to 8ohms.. please share your thoughts.
@miggatenogokui2474
4 жыл бұрын
yes u can
@shoof1696
4 жыл бұрын
if the sub is a dual voice coil then wire it in series to get 8ohms but if its single voice then youre stuck with 4ohms
@BrewdClutch
4 жыл бұрын
Or get second 4 ohm sub!
@nfak_mr
2 жыл бұрын
Is sapecker ka name keya ha yeh Pakistan me mil jae gy reply zaroor Dena shukrya
Пікірлер: 548