No one has good videos on gloss black offset truck wheels. Finally found one! Thank you
@ethangenier_2002
2 жыл бұрын
Awesome video!! Just purchased a set of 22x12 Fuel mavericks and they definitely need to be polished!
@SaltySerenity
3 жыл бұрын
I will be buying all your stuff thanks for the knowledge!
@HotBakedZiti
2 жыл бұрын
I'm not one to typically leave reviews but I honestly had to after using this product. I have 20x10 gloss black truck wheels with 5 years worth of salt, mud and brake dust that were never professionally cleaned or coated. Everytime I would clean them it looked like i was doing more harm then good and they felt like sandpaper when I would rub my hand on them.... I bought their wheel kit as shown in this video but instead of a 5" pad i bought a 6" pad with a 5" plate. My wheels have a deep lip recessed between the spokes and barrel. This allows me to get into those deep areas without having the polisher hit the wheel. I followed the steps in this video and I honestly cannot believe the difference. My wheels literally look brand new and are glass smooth. I wish I could post photos. I honestly thought I would have had to repaint my wheels but after a few hours on a boring day afternoon the results are unbelievable. If you have gloss black wheels do not sleep on this.
@Monahanweldco
2 жыл бұрын
Good video man I’m definitely doing this when it gets warmer!
@kodypemberton
3 жыл бұрын
Thank you! Great video
@SGTCantu
2 жыл бұрын
Thank you so much for making this video... I have similar wheels and this definitely helps a lot on keeping them clean!
@tristanhossack2206
2 жыл бұрын
How to you get the spokes all clean and shiny as well?
@briansside9668
3 жыл бұрын
Thank you so much
@jhill6033
3 жыл бұрын
Thats crazy they have my exact rims on here!
@BreakBeatStu
2 жыл бұрын
What are they? They look super nice 👍👍👍
@danielquiroz8294
Жыл бұрын
Does this get rid of haze from tire shine spray on wheels? Also does this get scratches out?
@ISILENTNINJAI
2 жыл бұрын
Would this work on spray painted alloy wheels? Recently spray painted my wheels black gloss and I'm going to just say the finish looks sub par. I got some orange peel and some runs/ clogs.
@dura-coatingtechnology9620
2 жыл бұрын
It won't fix that issue I don't belive. You won't remove orange peel with that polish
@somd_lftd_hoe8074
3 жыл бұрын
Weird there arent any reviews on this stuff at all anywhere re
@RageWin
2 жыл бұрын
Wish you guys would have put links to this bundle of products or individual products. You have so many I am having trouble finding the exact setup. Oh well. Just a thought.
When u go to clean them after the coating do u use a wheel cleaner or just soap. I'm assuming a wheel cleaner might remove the coating
@dura-coatingtechnology9620
2 жыл бұрын
Mostly soap but you can still use a wheel cleaner
@Rudyfastcat1
2 жыл бұрын
Is the Iron off supposed to have an overpowering chemical smell? The 32 oz I received sure does and I can still smell it 3 weeks later after washing my wheels
@dura-coatingtechnology9620
2 жыл бұрын
We don't have that issue at all. We have hundreds of gallons in out shop and we can't smell it at all. Sounds like the caps are not on tight or it's leaking. I also have it in my garage for my vehicles and can't smell it all. Check your caps on your bottles. We don't have any issues like that nor has anyone ever had that issue that's purchased this product
@tonyfoley9988
Жыл бұрын
I noticed you didn't apply any to the middle of the wheel (spokes), is this not supposed to be applied there? Still another great video about a awesome product.
@dura-coatingtechnology9620
Жыл бұрын
This is just a product demo video. We didn't do the entire wheel. The demo process would apply to all parts of the wheel. All areas can be polished and coated
@tonyfoley9988
Жыл бұрын
@@dura-coatingtechnology9620 thanks for clarification. I figured the whole wheel could be polished with the product but I had to make sure, thanks again. Absolutely 💯 a customer for life!
@leroypinkney9493
7 ай бұрын
Question whats a good polishing brush i can use on a small impact driver i have high gloss black rims
@dura-coatingtechnology9620
7 ай бұрын
We have no recommendations for that. Purchase a small 2 or 3 inch machine polisher from amazon
@iiSup3rior
3 жыл бұрын
What's the difference between wheelie clean and iron off?
@dura-coatingtechnology9620
3 жыл бұрын
WheelyClean is an acid based cleaner and Iron Off is a PH neutral cleaner
@ramazankaya538
3 жыл бұрын
Nice vid ! Do you guys also ship to Belgium ? Regards
@kbrown4023
2 жыл бұрын
Anything for matte black wheels? Would I do same process?
@dura-coatingtechnology9620
2 жыл бұрын
You can't polish matte surfaces unfortunately
@brandonnguyen1486
4 ай бұрын
Hey can you do a video for more heavily scratched black rims?
@dura-coatingtechnology9620
4 ай бұрын
The videos are based on what vehicles are in our detail shop and what work we are doing. The process would be the same except use a heavier cutting pad and our Step 1 compound and then finish them down using softer foam pads and ceramic Final polish
@brandonnguyen1486
4 ай бұрын
@@dura-coatingtechnology9620 I have no experience with a da. Can you recommend a heavier pad for cutting and the softer pad? It's in numbers correct? Like sand paper?
@dura-coatingtechnology9620
4 ай бұрын
@@brandonnguyen1486 use a microfiber cutting pad first with our Step 1 compound, then use a black foam pad with our ceramic Final polish
@brandonnguyen1486
4 ай бұрын
@@dura-coatingtechnology9620 could you achieve this same result with a white foam pad vs that microfiber pad?
@paulvivier8594
Жыл бұрын
My wheels are narrow and a lot of spokes. How do I get between them?
@dura-coatingtechnology9620
Жыл бұрын
You may not be able to but we would need to see how narrow they are
@jasonwaldron1347
2 жыл бұрын
Where can I find your products for sale?
@dura-coatingtechnology9620
2 жыл бұрын
Our website at dura-coating.com or Amazon
@elkabong3136
2 жыл бұрын
What size pad are you using ?
@dura-coatingtechnology9620
2 жыл бұрын
Our microfiber cutting pad
@johnforrest1429
3 жыл бұрын
What speed do you run on the da polisher?
@noel3466
3 жыл бұрын
Can it be done my hand ?
@dura-coatingtechnology9620
3 жыл бұрын
You will not get as good of a result at all with he polish
Tf that's still a new wheel let's c it on 10yr old wheels 👏
@DirtNassty
Жыл бұрын
Def not a new wheel lol... That shit was scratched and marred to hell my man.
@AntoineFinch
Жыл бұрын
WOULDNT A PALM POLISHER BE BETTER?
@dura-coatingtechnology9620
Жыл бұрын
We don't use palm polishers at all. But if that works for you have at it. Palm polishers being used in the detailing trade are very rare if at all. That's more a body shop tool. We do have Palm polishers we use for sanding
@AntoineFinch
Жыл бұрын
I just thought with the small space available on a wheel it would be better, no criticism was meant, didn't put it in question format, I apologize for questioning you
@dura-coatingtechnology9620
Жыл бұрын
@@AntoineFinch palm sanders aren't popular for detailing. You certainly could use one. We like the polisher in the video but you can use what ever works for that task. We only use palm Sanders for wet sanding. Sorry you're offended. No offense meant
Пікірлер: 54