How to prime the hopper on the PitBoss Pro Series 820. As soon as you assemble the PitBoss, and before installing the grates and grill. Prime the hopper before you start using it. We followed the PitBoss manual step by step.
Below are the steps for the Hopper Priming Procedure:
Open the lid to make sure there are no foreign objects in the auger.
Cut the PitBoss power on and turn the temperature control knob to smoke.
Once the auger starts turning, it will be very loud, kind of like an engine. Place your hand over the fire pot to feel for airflow. Do not touch the fire pit as it will be very hot and can burn you or cause injury.
Now that you’ve verified everything is working and the firepot is hot, turn the Pitboss off and keep the temperature control knob on the smoke position.
Grab your PitBoss pellets and fill up the hopper. I filled it up to the line inside the hopper.
Once you’ve filled up the hopper with pellets, it’s time to turn the PitBoss back on and keep the temperature control knob on Smoke. Press and keep holding the Prime button until you see the pellets start falling into the firepot.
As soon as the pellets start falling into the fire pot, release the Prime button and turn the PItBoss off by pressing the off button.
Now you can reinstall the shelves, grates and cooking components. The grill is ready for the grill burn off procedure, which we will do in the next video.
If you enjoyed this video or want more step-by-step instructions, be sure to visit us on our website SmokerGrillGir...
Негізгі бет How To Prime The Primer On The PitBoss Pro Series 820
Пікірлер: 18