I've seen a couple such videos and this is _hands_down_ the best one. Thank you NRS!!
@alaskanappalachian4394
2 жыл бұрын
Thanks for the information!
@cullumstirling
9 жыл бұрын
Any suggestions for applying a patch where the cut is within 1/4 inch of a major seam?
@noyaks546
11 жыл бұрын
Thanks Josh, I used this information to add a Scotty Rod holder to the tube of my Watermaster raft. Very easy info to follow and worked excellent.
@moukafaslouka4796
4 жыл бұрын
This was very helpful. Thanks a million!
@NRSWEB
4 жыл бұрын
Glad it was helpful!
@cheek1m0nkey
Жыл бұрын
Thank you!
@timo9355
Жыл бұрын
Any videos on painting or dying rafts for a custom color/design??
@cabbycabby1770
3 жыл бұрын
Great. I'm going to patch the silly amount of scupper holes on your Pike kayak. I've noticed the new version doesn't have them.
@NRSWEB
3 жыл бұрын
When a whitewater company builds a flatwater boat is it really a surprise that we added drain holes? Glad the video was helpful.
@Bill-NM
4 жыл бұрын
Seems so odd that a person would wait for the glue to "dry" before assembling the parts. Do you really mean DRY? Or do you mean more like "tacky", or "thick"? Something like that? Also wondering if heat can be applied to "flow" the glue, esp perhaps, next year when maybe the patch isn't holding as well and "re-flowing" the glue might fix it? Thanks...
@NRSWEB
4 жыл бұрын
Thanks for the comment. You're correct that the glue will be tacky not dry in between coats and before the patch is applied. We often use the knuckle test here. You stick your knuckle (of a gloved hand) to the glue. If the glove sticks the glue is ready, if the glove slides around on wet glue you need to wait longer. If it doesn't stick you waited too long and need to apply another coat of glue. You can use heat to remove a patch but using it to re-stick a patch that has come loose probably wont work. In that case your best to remove the patch and reapply with fresh glue.
@elcompanachillo2006
8 жыл бұрын
you guys are great.
@garylacoma1169
3 жыл бұрын
The hole in my pontoon is the size of a quarter. How do I apply glue so that it won't stick to the surface behind the hole. Do I apply the glue in a doughnut shape leaving the immediate hole area clean?
@NRSWEB
3 жыл бұрын
Hi Gary, You'll want to avoid getting glue on the inside of your tube if possible. One option is to use Tear-Aid on the inside of the tube to hold everything in place while you apply the adhesive. If that isn't possible you'll just have to be careful when brushing on the glue.
@garylacoma1169
3 жыл бұрын
@@NRSWEB Thanks.
@ehabmourad2326
2 жыл бұрын
Please, can you send the name of the glue, how to use it, and the company that manufactured the glue?
@NRSWEB
2 жыл бұрын
All of the glue used in our videos is available at NRS.com. Some of the glue from older videos is not longer available but we typically have replacement options. Give us call if you have additional questions 877-677-4327.
@handgunNmore
3 жыл бұрын
thanks for the video it helped ..... would you recommend a second larger patch after the first patch has cured for spreading the stress over a longer run of pvc ?
@NRSWEB
3 жыл бұрын
Thanks for the question. A second patch is definitely an option. They're typically used on high wear areas like the bottom of a boat. Feel free to reach out if you have any other questions.
@MrRobinski
Жыл бұрын
Which glue will stick the PVC to the transom and the nose cone rubber?
@ShopperPlug
2 жыл бұрын
1:22 - Each and every adhesive you recommended can not be found on Amazon...
@NRSWEB
2 жыл бұрын
Hello Max, All of the adhesives from this video can be purchased from nrs.com. The one exception is Vynabond that is no longer made. HH66 is the replacment for Vynabond that is also avalible at nrs.com. Shipping adhesives can be difficult because they're flamable. That could be the reason amazon isn't selling them. Feel free to give us a call if you have any additional questions. 877-677-4327.
@ahmedjelidi135
4 жыл бұрын
شكرا جزيلا
@nicolasberthiaume5456
4 жыл бұрын
Really helpful video, however I understand that's mostly a repair when your back at home. Do you have a suggestion ''while on the go'' suppose you have an incident during your excursion ? Is Aquaseal good or Airhead Vinyl repair ?
@NRSWEB
4 жыл бұрын
Hi Nicolas, Thanks for your question. Aquaseal and TearAide tape are both great options when you're on the river. I've never tried Airhead but it might also work. If the damage is significant enough the type of repair shown in the video maybe required. Its always a good idea to bring the supplies from the video, just in case.
@kenbrunskill4789
Жыл бұрын
1st issue is I'm restoring a Scadden Inflatable Kick Boat, all the components (Oarlocks, Oar Storage Clips & Footbar holders), I presume were added to the boat by Scadden after they received it from the boat manufacturer were loose and falling off! I used Acetone to clean those components and they still have a tackiness to the touch, which I presume to be residual adhesive, seem no amount of cleaning gets rid of that tackiness. Can I apply Clifton or Stabond adhesives to that tacky surface? 2nd issue is the previous owner used an unknown adhesive to add Scotty Rod Holders, when they were removed a hard crackled appearing adhesive remained so far Acetone seems to barely affect it. I live in California where M.E.K. is outlawed & unavailable. Any suggestions?
@NRSWEB
Жыл бұрын
Yes, applying Clifton or Stabond to that tacky surface will work for you. Unfortunately, MEK substitutes do not often work well. The best suggestion besides MEK is going with a stronger acetone.
@davisscott8499
27 күн бұрын
What glue would you recommend for a seem repaire about 2 inches long on pvc kayak?
@NRSWEB
26 күн бұрын
Clifton PVC Adhesive or Stabond Adhesive are both great options for making repairs on PVC boats. Please feel free to give us a call at 877-677-4327 if you have any additional repair questions!
@isla7899
3 жыл бұрын
I see that the raft is not full of air but somewhat flaccid. I thought it would want to be firm. I guess if it is tight because it is full of air, the surface could be stretched slightly whereas the patch is not. I will deflate slightly before applying patch. Thanks for the info.
@NRSWEB
3 жыл бұрын
Hi Meg. The repair in this video was done on a Urethane IK thwart. That material is very stiff and the fact the thwart so small it looks like there is some air in the chamber but its actually totally deflated. When doing repairs like this you don't want any air inside and you want the area being repair over a flat hard surface so that you can get adequate pressure when you roll the patch. let us know if you have any other questions.
@mckenziekeith7434
2 жыл бұрын
Depending on the size of the hole, it could be difficult to keep the pontoon inflated while patching it. You may have no choice but to do it flaccid. Also, maybe the air bubbling into the patch area will interfere with proper adhesion of the patch?
@AdamHrebeniuk_apexadam
2 жыл бұрын
Slow leak in one chamber. I could NEVER find the offensive location. No bubbles. No sound (even using a stethoscope). No fix. Just a slow deflation over a 3-hour period. So very frustrating. But the video was good!
@rtharmon454
2 ай бұрын
But Its always on a seam
@lostandfound404
2 жыл бұрын
I haven’t found anything that says which side of the patch faces outward, the glossy textured side? Or the smooth dull side? Logic tells me glossy side out, correct?
@NRSWEB
2 жыл бұрын
Thanks for your question. Both sides of the fabric are the same material. The only difference is from the manufacturing process. So you'll have a succesfull patch no water what side you use. We tell people to match the texture with the rest of the boat.
@inside452
9 жыл бұрын
did you just draw a perfect circle free hand at :30 sec mark?
@dasolow
8 жыл бұрын
+inside452 I saw that as well. This guy is a boss!
@colterjones8674
4 жыл бұрын
Ha!
@srsorbo
3 жыл бұрын
I literally replayed that to see him do that again!
@luissuarez8129
2 жыл бұрын
Thanks for your video, I'm new to repairing or patching an inflatable boat. My son bought a Saturn 16 fett and it had some repairs and some loose handles,? which glu do you recommend? and what already has a patch but they have come off and some air loss, what do you recommend? Greetings from Fort Lauderdale Florida
@NRSWEB
2 жыл бұрын
Hi Luis Saurez, The Clifton PVC Adhesive we offer on NRS.com is probably the best option for the repairs you mentioned. Feel free to give us a call at 877-677-4327 if you have additional questions. www.nrs.com/clifton-pvc-adhesive-la-4009/pjw8
@gerleincastrogil8405
4 жыл бұрын
En colombia donde consigo el producto
@bsch1955
3 жыл бұрын
Can i attaché a PVC fitting to a Hypolon boat- specifically a handle or d ring?
@NRSWEB
3 жыл бұрын
You can but you'll need to use Stabond adhesive. Its better to use the correct handles and d-rings for your boat but if that isn't an option this will work.
@saksirikridakara
2 жыл бұрын
Would HH-66 Vinyl Cement work well to repair PVC and Urethane Boats?
@NRSWEB
2 жыл бұрын
HH-66 works great for accessories such as dry bags and small outfitting projects. For permanent repairs we recommend a two part PVC adhesive with a cure accelerator for the best results. Clifton PVC Adhesive and Clifton ACC 4844 Accelerator work great!
@theeasybeats5913
9 жыл бұрын
Is that MEK or NEK?
@conman20000
6 жыл бұрын
What stroes carry these 3 adhesives? Couldnt find one at the store in my town.
@mojokitchenloungeasheville4912
2 жыл бұрын
Can this same process be used to patch the bladder?
@NRSWEB
2 жыл бұрын
It can be used for a bladder, provided that you have the correct patching material. Most people use Tear Aid to patch bladders. Tear Aid is fast and super easy, and because its protected by the outer shell its basically a permanent fix.
@ethor44
9 жыл бұрын
to theeasybeats: it's MEK
@1minibean
6 жыл бұрын
Can you tell me the best place to buy large sheets or rolls of pvc and hypalon .?
@NRSWEB
6 жыл бұрын
Hey 1minibean, we sell both PVC and Hypalon (aka Pennel Orca) material by the foot on our website.
@wiredforstereo
2 жыл бұрын
My PVC raft is coming apart, the bottom is coming off the sides.
@NRSWEB
2 жыл бұрын
Hi Solomon. Sorry to hear about your raft! If you purchased your boat through NRS or an NRS dealer, please give our Customer Experience team a call (877-677-4327). We'd be happy to walk you through the repairs or discuss other options.
@dharmeshanandnodualidad3798
3 жыл бұрын
Hi, is HH 66 good enough? fora Zodiac 310 RIB with a lot of needed patching...Thank you
@NRSWEB
3 жыл бұрын
If your Zodiac is PVC, then HH66 would work but it wouldn't be the first choice. One of the Clifton adhesives or Stabond would be a better option. PVC is a difficult material to glue so using a quality adhesive will be your best bet to insure you get a lasting repair.
@dharmeshanandnodualidad3798
3 жыл бұрын
@@NRSWEB Thank you friends ;)
@rebecascorner
4 жыл бұрын
Is clifton urethane adhesive the same as hh66 cement?
@NRSWEB
4 жыл бұрын
Hi Rebeca, They're different adhesives but there is some overlap between the two. Clifton is a stronger adhesive and is typically used on rafts and thicker material. HH66 is typically used on thinner vinyl material. If you have specific questions give us a call at 877-677-4327.
@gr8fuldaniel
8 жыл бұрын
Amazon doesnt have ANY of those adhesives.
@NRSWEB
8 жыл бұрын
Thanks for watching DanG Tube. You can purchase these adhesives on nrs.com here: www.nrs.com/category/2988/rafting/pvc-pu-adhesivessolvents. If you have any other questions, feel free to give our repair experts a call at 877-677-4327 or shoot us an email at service@nrs.com.
@ab79381
7 жыл бұрын
NRS how can I get your product while it is not eligible to ship inflammable products abroad? I live in Kuwait and I desperately need this adhesive for my PVC inflatable boat?
@neonskyline1
7 жыл бұрын
I repaired our Dinghy with the patch and glue supplied, it stuck ok but the glue melted when it was left in the sun, what glue won't melt ?
@hidingo
7 жыл бұрын
if the can of glue came with a built in brush why didn't he use it?
Пікірлер: 71