Instructions to reglue or reattach your rear view mirror that has the stainless steel button as your attachment method.
😱😱😱 - INTERESTING VIDEOS
11 Minutes of Detailing My Car: • How To Detail A Car In...
How To Shampoo Car Carpet: • How to Shampoo Car Car...
Muffler Hole Patch: • How to Patch a Muffler...
Knocking Noise In Engine (Fixed): • Knocking Noise In Engi...
Whole Bottle of Back to Black: • Mothers Back To Black ...
There are seven steps to the Permatex kit and they are easy to follow. You want to remove the old adhesive layer off of the stainless steel button. You need to clean the button and the windshield off with a grease and wax remover. Before you clean the windshield you want to mark where the old adhesive spot was before removing the old adhesive so you know where to place the new adhesive. After you clean the button and windshield, inside the Permatex kit there is an adhesion promoter pad that you need to open. Open the adhesive promoter pack and wipe on a centered location (where the old adhesive was that you clean off). Let the adhesive promoter dry for about 60 seconds. Put one drop of the adhesive supplied in the Permatex kit onto the center of the stainless steel button. Quickly apply the button on the windshield making sure the button is oriented correctly and that it is straight up and down. Put firm pressure on the button for 60 seconds. Allow the adhesive to dry for at least 30 minutes. Then reattach your rear view mirror.
✅✅✅ - SUBSCRIBE
Subscribe: goo.gl/EScwor
Recent Upload: goo.gl/q32KFc
🎥🎥🎥 - PLAYLISTS
Toyota 4Runner Playlist: goo.gl/FjrRXp
BMW E36 Playlist: goo.gl/1yWbxH
Chevy Lumina Playlist: goo.gl/UTgibi
🔧🔧🔧 - TOOLS
Tools In This Video
amzn.to/2tSbA5y
🔧🔧🔧 - TOOLS
Other Useful Car Repair Items
Ratchet Screwdriver: amzn.to/2k4Psl6
Shop Towels: amzn.to/2ku8amT
Hand Cleaner Goop: amzn.to/2jqHJNg
Orange Hand Cleaner: amzn.to/2jg3ZpM
34 Piece Ratchet Set: amzn.to/2k1rLdm
Car Jack (BestSeller): amzn.to/2jqAcOo
Jack Stands: amzn.to/2jqOJd7
Torque Wrench: amzn.to/2jNBALe
---------------------------
AutOdometer was previously MCRC (My Car Repair Channel)
Disclaimer: Each video that is produced and published is intended to be educational. Tips and tricks will be offered for your viewership. The outcome of your car repair is solely your responsibility. Research and a good thought process should be completed before each repair.
Негізгі бет Автокөліктер мен көлік құралдары How To ReGlue and ReAttach Your Rear View Mirror
Пікірлер: 71