Thank you so much, I have spent a lifetime trying to remove, however with your video I done it in a minute. 😊
@DavidPhamChannel
2 күн бұрын
Glad I could help!
@thebritishindian1
Жыл бұрын
That was super helpful because I didn't know the exact technique to change my Speedmaster's original Omega NATO strap to the original Omega leather one. I asked the shop to change it to the NATO strap at the point of purchase. They took it out the back, changed the staps over, then put the leather one back in the box. So I was never able to observe the technique. Thanks to this video, I used the Omega tool that came with my Speedmaster to quickly swap the leather one back on without causing damage. Your technique was the key. Thanks so much for posting this video.
@DavidPhamChannel
Жыл бұрын
Glad i could help
@Ztinkyy
Жыл бұрын
Perfect execution and plenty of cautioning - very professional. That’s the way you teach. Thank you.
@DavidPhamChannel
Жыл бұрын
You're very welcome!
@dangermuz
2 жыл бұрын
Thanks so much for this! After struggling for an hour and watching 5-6 other youtube videos on this subject, this was the absolute best video out there. After watching this it took me 3 tries and I was golden! Worked as a charm on my BB 36 where all other tips in videos did not get me anywhere. Again thanks a bunch, I was close to giving up before I found your video
@DavidPhamChannel
2 жыл бұрын
You're very welcome!
@Zyklop223
Жыл бұрын
Same here! I didn't know that you really have to put a bit more pressure on the bracelet. That was the key. Thank you!😊
@getzoutdoor
Жыл бұрын
Thanks so much! I was trying hard to do this on mine and I was scratching up my lugs. You helped with the push index finger trick.
@SOYDEMONTERREY
Жыл бұрын
Thank you sir! I was struggling putting back in the bracelet. Your instructions made it easy.
@DavidPhamChannel
Жыл бұрын
Glad it helped!
@papaghys
7 ай бұрын
THANKS !!! Saved me a lot of time and frustration ... pushing up...what a simple and great idea !!
@edmundang5174
2 жыл бұрын
This was really helpful. I just managed to remove my SMP 300 bracelet with your tips. Thank you.
@DavidPhamChannel
2 жыл бұрын
Awesome, enjoy the watch!
@dezmarinvestmentsllc9964
2 жыл бұрын
Thank you!!! I was about to give up and take it to an Omega store. You saved me a trip. It's much easier to take the bracelet off than put it back on.
@bradcover39
2 жыл бұрын
Best tutorial concerning this type of bracelet I have seen - thank you!!
@DavidPhamChannel
2 жыл бұрын
Glad it was helpful!
@THEVIVMATHEW
2 жыл бұрын
@@DavidPhamChannel 😊
@DaveFL1976
9 ай бұрын
Wow, you make it quick and easy! Thanks for the video, I usually include brute force and curse words to complete the process,
@jondavies4027
Ай бұрын
Awesome video straight to to point solid advice.
@DavidPhamChannel
Ай бұрын
Thanks!
@Kaleema007
Жыл бұрын
Thanks mate. This helped a lot. I switched my bracelet out on my Omega Seamaster Planet Ocean from QoS with a nato strap
@John..18
3 жыл бұрын
Thanks for this,, useful tip about applying the pressure, with your finger,,,, I took my bracelet off my smp 300m, a couple of months ago, to wear it on an Isofrane strap, for the summer, and will be putting it back on the bracelet maybe around October... I'll check out this video again, before I re-install the bracelet, ! Many will say, this is totally obvious what to do, but I like to be 100% confident, before attempting anything to do with my very expensive pride and joy,, ha ha.. Thanks again,, all the best... ps,, I highly recommend the Isofrane black rubber strap.!!
@morganstrapco
Жыл бұрын
Dude, thank you so very much bi watched your video and decided not to through my watch out the window because I finally got it off the bracelet. And my daughter liked your video.
@DavidPhamChannel
Жыл бұрын
Awesome, thanks, glad to help!
@flamabl1
Ай бұрын
Nice tutorial, it worked great. Thank you.
@pablogonzalez8304
2 жыл бұрын
Thanks Dave! This method really worked like a charm not for an Omega though for a Mido
@DavidPhamChannel
2 жыл бұрын
Glad it helped!
@jesselivermore4318
6 сағат бұрын
To avoid any scratch have to use tool who remove at the same time both side of the springbar
@iriehd
Жыл бұрын
Very helpful for a beginner like me. Thanks a lot!
@brentonl1746
Жыл бұрын
Thanks for this very clear instruction makes it incredibly easy to change bracelets. 🇦🇺🇦🇺🇦🇺
@DavidPhamChannel
Жыл бұрын
No problem
@antoniovillar1729
4 ай бұрын
Perfect instructions! Thanks so much.
@AutoVidzzz
2 ай бұрын
This was super useful. Thank you
@DavidPhamChannel
2 ай бұрын
Glad it was helpful!
@enriquezebede536
2 жыл бұрын
Wow finally I learned I strugled for months thanks
@DavidPhamChannel
2 жыл бұрын
Glad I could help
@dougritchie6870
6 ай бұрын
Thanks! Hardest springbars I've ever removed
@alexanderm8476
2 жыл бұрын
Brilliant video. The only one that helped me!
@jckhshtg5475
7 ай бұрын
ur the best!!!, bin trying for 3 days till now ( Longines Hydroconquest )
@SpaghettiWithMeatSauce
3 жыл бұрын
Nice and succinct video, thank you. I have seem a couple of Omega bracelet removal videos now and they all suggests sort of "lifting" the base of the strap out of place to gain access to the pins. Mine doesn't seem to even budge on my 2021 Speedmaster. I shall keep trying! EDIT: Just kidding. I got it. Thanks again.
@DavidPhamChannel
3 жыл бұрын
Glad it was helpful!
@petergilbert8286
Жыл бұрын
Brilliant video, life saver, many thanks
@DavidPhamChannel
Жыл бұрын
You're welcome!
@claymore9359
9 ай бұрын
Thank you for this tip!!!!
@DavidPhamChannel
9 ай бұрын
You bet!
@allymac68
7 ай бұрын
Nice video David - Helped greatly! Subbed.
@DavidPhamChannel
7 ай бұрын
Thanks for the sub!
@leelennon56
11 ай бұрын
Thank you for sharing, great video !
@DavidPhamChannel
11 ай бұрын
Thanks for watching!
@skarn911
4 ай бұрын
It was a great help! Appreciate🙏🏼
@henz993
2 жыл бұрын
Thanks for making a very helpful video.
@DavidPhamChannel
2 жыл бұрын
Glad it was helpful!
@marcn8750
Жыл бұрын
Omega spring bars are single collar vs Rolex which are double collar and easier for the tool to grip them. You may be able to buy an aftermarket spring bar that has a double collar for the omega. I would tape the lugs front and back and even part of the case and bracelet. This is a safety measure should the tool slip and scratch the case or lugs. I would also open the bracelet from the clasp to make it easier to access the holes to insert the spring bar tool. Also, move the watch case away and to the bracelet instead of the other way round. Keep the spring bar tool stable. This is when using a spring bar plier.
@augusto8821
11 ай бұрын
Sehr sehr gute Beschreibung 👍
@DavidPhamChannel
11 ай бұрын
Freut mich, dass dir das Video gefallen hat.
@patrickkohli6456
3 жыл бұрын
Thanks for posting this. I have the same watch with both bracelet and OEM strap but I struggle when it comes time to put the rubber strap back on - it doesn't click into place as easily as the bracelet. Would you be willing to do a video on how to install the OEM rubber strap with the Bergeon 6767? I bet others would find that useful as well
@DavidPhamChannel
3 жыл бұрын
Hey watch this video, just slow down the video speed. Starts at 1:20 kzitem.info/news/bejne/0pCbnoh4sqCYhnY Its not as detailed as this video but the steps are more or less identical to this one. Let me know how it goes.
@patrickkohli6456
3 жыл бұрын
@@DavidPhamChannel So it's a little hard to see how you did it... the bracelet was more clear. Are you putting the springbar in between the lugs first and then wiggling the strap so that both ends get seated into the holes? Or are you guiding one end of the springbar into the hole first with the forked tool and then pushing down on the other side until that clicks into place?
@DavidPhamChannel
3 жыл бұрын
@@patrickkohli6456 You will only need the spring bar tool to seat the 2nd end of the spring bar. the first end of the spring bar gets inserted into the hole at the start without using the tool. Does this make sense?
@Account150877
Жыл бұрын
I would also place a thumb on it for better control, before pushing it upward. That way you're not causing the scratches (scratches I wouldn't be OK with, imagine trying to sell an unworn watch this way with a different strap)
@cyklopPL
Ай бұрын
Thank you
@DavidPhamChannel
29 күн бұрын
You're welcome
@rahulchowdhry9472
3 жыл бұрын
Great video. A few questions for you since I have the exact same Planet Ocean: 1- how often do you swap from bracelet to strap? And do you always use the Bergeon 6767 or do you use the tweezers? 2- Have you noticed any enlarging or deformation of the lug holes? I keep thinking that the tension from the springbar while it’s between the lugs can put pressure on the edges of the lug holes as it’s “clicking” into place. Any thoughts on this?
@DavidPhamChannel
3 жыл бұрын
I usually change between strap and bracelet a couple times a year. No, I haven't noticed the holes deforming/altering in any way, aside from some surface scratches. The lug holes have not changed since owning the watch. Be sure to use OEM omega spring bars, they are built to fit in the holes perfectly without any wiggle, after market spring bars are rounded on the ends and a tad smaller so when the are seated they will wiggle a bit.
@rahulchowdhry9472
3 жыл бұрын
@@DavidPhamChannel oh I definitely only use OEM bars for the watch and even minimize how often I swap between strap and bracelet. I noticed another video you use the Bergeon tweezers. Would you say the majority of your strap/bracelet changes are with the Bergeon 6767 or the tweezers?
@DavidPhamChannel
3 жыл бұрын
@@rahulchowdhry9472 I only use the 6767F for my Omega watches, the tweezers aren't great for the Omega spring bars
@rahulchowdhry9472
3 жыл бұрын
@@DavidPhamChannel got it. Appreciate the feedback. Love the videos on your PO8900. Keep it up
@stevescene8949
2 жыл бұрын
Thanks very much, very helpful
@DavidPhamChannel
2 жыл бұрын
You're welcome!
@baha069
2 жыл бұрын
Thanks alot:-) Quick and easy
@nave77
2 жыл бұрын
Great help!
@MKGamingInvesting
Жыл бұрын
Amazing tip
@DavidPhamChannel
Жыл бұрын
Glad it was helpful!
@watchland3361
9 ай бұрын
I charge $20 to do this for customers at my shop, It does have risk if you scratch. Customers get peeved. I do the same technique as you did but for added safety I put scotch tape over while I do the work so the tool or pin does not skip and scuff.
@johnnymassaBRAZIL
2 жыл бұрын
It was very helpful thank you!!
@DavidPhamChannel
2 жыл бұрын
You're welcome!
@andrewvaughan5686
Жыл бұрын
Very informative. But I still can't get it, way too finicky and I don't have the patience. These luxury brands really should all have an easy changeable strap system like iwc
@DavidPhamChannel
Жыл бұрын
I agree, they will come eventually.
@F15IDriver
2 жыл бұрын
Excellent
@felixk9221
7 ай бұрын
PLEASE AVOID SCRATCHES ON YOUR WATCH! If you just watched this video and want to try it yourself, then please tape your lugs with some sort of tape! I just introduced the first scratches to my brand new Omega Speedmaster by doing it the way it is shown here. The pins of the bracelet scratched the backside side of the curved lugs (You can also such scratches in this video). In my case the lugs have a matt finish so you can't polish the scratches out.The scratches are in. Forever. Please don't make the same mistake as I did by not taping the lugs. If you're not sure, then have it done by a professional. In hindsight I would have much more preferred paying 20 Euros/Dollars/Whatever than having scratches now.
@tagheuer02
Ай бұрын
Haha you're sucks for you
@zhizian
2 жыл бұрын
Does removing the bracelet using your technique prevents scratches on the lugs?
@DavidPhamChannel
2 жыл бұрын
It prevents scratches on the outside of the lugs, the underside may scratch if you are not careful. In the video I mention using tape to mask off the underside, if you do this there will be no scratches.
@krit5339
Жыл бұрын
99.99% scratches guaranteed. This is not the recommended way to remove bracelets. Straps, yes. Bracelet, no. Noob, lazy, incapable, whatever you want to call it, please get proper pliers.
@DamianceteVideos
Жыл бұрын
I land here after almost 30 minutes trying to remove the bracelet... Wish me luck! haha
@DavidPhamChannel
Жыл бұрын
Good luck!!
@2008wrx
2 жыл бұрын
I I could have seen/searched this before scratching my case 🙈
@DavidPhamChannel
2 жыл бұрын
Glad you eventually found it.
@adbraham
2 жыл бұрын
I don’t get it, is my bracelet the ONLY one where Omega used so much locktite it needs heat!?
@DavidPhamChannel
2 жыл бұрын
Nope, its pretty common, thus why I included it in the video.
@denisa.4341
2 жыл бұрын
How to change the date in seamster in omega ?
@DavidPhamChannel
2 жыл бұрын
By moving the hour hand forward or backwards 24 hours, there is no quick date change on this model.
@denisa.4341
2 жыл бұрын
@@DavidPhamChannel i did thank you.
@user-qs7fr5iv3m
2 жыл бұрын
Omega 🇨🇭🌍🇮🇶💪🙂👍💲💎روووعة
@fearthereaper5663
2 жыл бұрын
Hello . How do you remove the link? Thanks a lot
@DavidPhamChannel
2 жыл бұрын
I have a video on this kzitem.info/news/bejne/tYaXzKlrhWeFgGU
@fearthereaper5663
2 жыл бұрын
@@DavidPhamChannel but the ones without screws
@DavidPhamChannel
2 жыл бұрын
@@fearthereaper5663 oh sorry. I don't have any Omega watches with pins and collars anymore.
Пікірлер: 101