Perfect video, helped to fix all issues i have with my 1.9 zafira b. I have changed the throttle as i oil inside the electrical part, engine light disappeared and the car regained full power. Also changed the faulty map sensor as the rpm max at 30 with no power and engine light is on, all ok sfter charging map sensor, i changed the air filter and cleaned the egr and maf same time with the map sensor change and the car is performance is very good. Honesly this video helped me more thsn the workshop as they couldn't figure out the problem and they suspected bad turbo which is not correct. Hopefully my comments are helping others facing same issue.
@statorius
3 жыл бұрын
So amazed. Finally, someone do understand how to make proper DIY video. Thanks.
@Sarpulis
7 жыл бұрын
many thanks ! for the tips. i was having problems on low speeds 60kmh when gently accelerate car was struggling cutting out. no problem on the shut down . found loot of oil in the connection and inside the body. after cleaning works well , no more problem. vectra C 1.9 dt 88kw. thank you !!!!!
@stefanreck7908
2 жыл бұрын
That throttle body is such an abomination... Having the electronics directly under the drive mechanism inevitably floods it with a mixture of oil, soot and condensate. Cleaning it out helps when the ECU starts throwing random errors but the problem will return, as the leaky lower seal of the throttle itself is almost impossible to fix. Why didn't they simply turn the whole unit 90 degrees, putting the electronics box on the side? The space is there.
@nikolajuren
3 жыл бұрын
Perfect video to see how it is done, even this EGR was not so bad, and if there was problem it was in MAF and would be great if solenoid was disassembled also, but also was OK, so lucky for him not much hard work :). But really great video for anyone to manage to get it done. Even all other things on this car and motor (i have Zafira) are complicated and lot of effort, this tutorial and every tip is perfectly shaped and so well incorporated, so this job is really easy if you have right tools. WELL DONE !!!!!!
@dwebb8910
5 жыл бұрын
Thanks for this video. Cleaned mine out today and it runs like a dream. Really appreciate you post this.
@TheSaipher
4 жыл бұрын
Great video thank you :) Edit : today i got power loss on my alfa 159jtdm can't go up from 20km/h and 2000rpm i stopped turned the engine off and started again no problem - map maf dpf egr are ok i had a throttle body error on diagnostic so this video is uber useful for cleaning everything :)
@user-it7pd9qg7d
3 ай бұрын
Как всё здорово показано и без единого слова,браво
@fabiansemedus1650
2 жыл бұрын
Very well explained, basically a perfect video
@brendanbradyfan3589
6 жыл бұрын
These Z19DT 120 for me have been nothing but problems and not the easiest designs when trying to repair hate the damn cars much prefer the VW 1.9
@Carlostype
6 жыл бұрын
Never thought of disconnecting the cooler pipe, looks easier than my method but everything else i do! And the anti shudder valve or throttle body collects a crazy amount of oil in its base
@neildean7515
11 ай бұрын
Whats the difference between anti shudder valve or throttle body? Is it one or the other?
@Carlostype
11 ай бұрын
@@neildean7515 throttle butterfly valves are on petrol engines this anti shudder is a diesel component
@apnachotala5295
3 жыл бұрын
Helpful video Thanks 😊
@garethbrown5534
3 жыл бұрын
What causes the oil to leak into the circuit board box as just cleaned mine and was full to brim of oil thankfully all cleaned and working properly again
@redyxTM
3 жыл бұрын
I have the same problem
@redyxTM
3 жыл бұрын
did you manage to clean it? And stop the oil to get in the circuit board box?
@garethbrown5534
3 жыл бұрын
@@redyxTM yeah cleaned it all out but couldn’t figure out how oil was getting in but since clean nothing so a weird one
@boderek3039
3 жыл бұрын
Amazing videos!
@konradgacek7156
7 ай бұрын
Ja mam dalej problem z przepustnica błąd P1125 są dni gdzie chodzi idealnie a są dni E wywala błąd za błędem do tego podczas gaszenia słychać klapę w przepustnicy powoli nie ma siły
@leecampbell3162
6 жыл бұрын
Really great video! Well thought out process and actually able to see what your doing been a big help thanks! 👍😁
@polistolas1064
10 ай бұрын
Can it be a problem with dirty throttle body when pressing the gas gently and car struggling? Looks like turbo cutting off or something like that. There is some oil around throttle body
@Tracks777
7 жыл бұрын
Good video! Keep it up!
@Zoe-dl5kx
4 жыл бұрын
Iv recently done all this, then engine management light came on with code p1125 any ideas what it could be?
@ShpendKacallniku-jo6vx
Ай бұрын
Fiat engine strong
@1Guy1SonyVegas
Жыл бұрын
What does it mean if the throttle body electronic part is full of oil? Means turbo is leaking oil ?
@MMilewski78
5 жыл бұрын
Czy klapa przepustnicy nie powinna być zamknięta? Czy jesli jest otwarta to sie sama zamknie następnym razem? Shouldn't the throttle flap be closed? Or will close itself after the assembly?
@Red_Ford
5 жыл бұрын
Klapa jest otwarta przez cały czas. Pilnuje tego dość mocna sprężyna :) Na czas gaszenia silnika sterownik wysyła impuls do przepustnicy, która za sprawą silniczka w przepustnicy zamyka klapkę na ok. 2-4 sekundy. Przepustnica nie działa wyłącznie jako klapa gasząca. Wykorzystywana jest również przez sterownik w trakcie wypalania filtra DPF.
@avideo2374
4 жыл бұрын
Hi how i can do the self-learning ?
@rscosworthfan
6 жыл бұрын
i did this on my vectra 1.9cdti and reset the eml 3 weeks later plug in my diagnostic tool its throwing up egr fault again :o(
@Doile911
Ай бұрын
8:24 what if its filled with oil?
@genttasani2771
5 жыл бұрын
excellent job
@user-nt4qo4vq2s
6 жыл бұрын
Is throttle bodi Electric became damaged ?or only we kan cleaning?
@mad2007max
6 жыл бұрын
why is there oil in the electronic side of the throttle body? some people are saying it's because of the turbo but this is happening for almost 3 years, and turbo is still kicking....so it must be something else.
@fixanddrive
6 жыл бұрын
There is always oil in the intercooler system and its normal, in fact it's oily compressed air coming from the turbo. The problem is that the sealing in the throttle body is crap and lets the oils run down to the electronics. In fact this is not a big problem. Almost each throttle's electronics has a swim in oil and its ok for many years.
@ralgor100
4 жыл бұрын
@@fixanddrive I drilled a small hole in the bottom to let it run out.
@ekans13
3 жыл бұрын
My Zafira B has started making a whistling noise when I take my foot of the accelerator. Could doing this get rid of it?
@bujargerguri9619
3 жыл бұрын
Same problem
@agenciajuegos999
5 жыл бұрын
I have a problem with my automatic zafira 1.9 cdti, after 40 minutes on the road or in the city, when changing gears the revolutions go up and hit the third gear, will it be the problem of the electronics of the throttle body?
@samuelboyd972
4 жыл бұрын
These 1.9 120hp seem to go through a period of surging ,and even stalling .at very awkward places throttle body problems fuel problems egr problems fuel sensors they seem to have an array of problems my advice would be check everything, as I even had to replace the fuel pump not a bad engine these fait units if cared for, I have 150000 on mine now with no oil usage no leaks no problems with the automatic sealed gearboxes in fact this the most superior I have driven better than mercs or bmw etc. Don't give up one day it all comes together.
@GavstarLeo
5 жыл бұрын
Is this more or less the same on the Astra H/Mk5 1.6?
@ralgor100
4 жыл бұрын
I had oil in the throttle body PCB electrics, how does it get in there?
@Red_Ford
4 жыл бұрын
Through the axis on which the flap is mounted. Over time it loses tightness and oil from the intake gets inside. I still don't know if there is any sealing or if the tightness disappears with the wear of the axle and the throttle body. On the photo below I have marked the place where the oil gets inside. imgur.com/YERR7Kb
@TheDarkangle
2 жыл бұрын
I changed the egr valve and still got and error code for throttle body. Can that be the problem?
@fixanddrive
2 жыл бұрын
What error? Did you do the pedal test? kzitem.info/news/bejne/mp5-zoBsZqGcmZg&ab_channel=FixandDrive
@laleliley1424
6 жыл бұрын
what did you use to clean the map sensor? thx
@fixanddrive
6 жыл бұрын
fireplace cleaning foam
@redihoxha2940
6 жыл бұрын
It's not nessesery to unmount and clean all intake minifold?
@fixanddrive
6 жыл бұрын
Redi Hoxha no issues at all with the inlet manifold on z19dt. The z19dth is a nightmare
@redihoxha2940
6 жыл бұрын
Fix and Drive it's difficult to unmount intake on opel?
@wordreet
5 жыл бұрын
@@fixanddrive Curses, that's not what I wanted to hear. I'm about to strip and clean mine. I only have one day to do it, the sun's not up yet and it's gonna rail this afternoon. :¬D
Пікірлер: 51