This is a great video but I'm concerned the average user will be too scared to disassemble the whole printer. This is a skill for the experts.
@alissamaemarticio149
3 жыл бұрын
Indeed
@MikeMushovic
4 жыл бұрын
Thanks for the video guys... you just helped me disassemble ONLY what I needed to
@Okipentv
3 жыл бұрын
Great to hear!
@darkquantum
3 жыл бұрын
thank you so much for this video. i was about to throw way my printer
@hiremnk440
3 жыл бұрын
Hi. 2m38 you unscrew something before turning the printer round to the camera view... what screw were you turning as I am at 2m50 and cannot take that black cover off (it’s stuck at the centre although the top came off fine at this point). Thanks
@modalosimy3046
2 жыл бұрын
Hello, where is this maintenance shop located? How can I find you?
@mikhailgregovszki7478
3 жыл бұрын
All HP had to do was make the fuser user replaceable and this wouldn't have been needed. Damn you HP!
@stebrad123
4 жыл бұрын
For future referemce you can normally remove that kind of paper jam by pushing a laminated A4 sheet through the gap to clear the paper jam
@parrhesia626
4 жыл бұрын
How?
@stebrad123
4 жыл бұрын
@@parrhesia626 drop thebrear door anf there is a gap in the fuser. Push a laminated A4 sheet through towards the paper output tray and it pushes any blockages out with it. Or push from the output tray side towards the rear depending on where the jam is.
@wt3861
4 жыл бұрын
Many, many thanks for this invaluable advice. I had a similar paper jam on a M254DW and I thought I was gonna have to take the whole printer apart. Laminated A4 sheet worked like a charm. You're the best!!!
@ckvkkeek
4 жыл бұрын
This... this right here should be its own video.
@LauraTinnel
3 жыл бұрын
Are you serious? WHY did I buy an HP. I should go back to the trusted Okidata that I had for years. Never had anything like that with that color laser printer.
Пікірлер: 15