I never would have figured out that fuse is bolted in place. thanks for the great tip my dude! You saved me hundreds of dollars in mechanic costs.
@GregJoshuaW
7 жыл бұрын
It is super cool we make videos to help each other out with these things. I never had the patience to film myself doing these things, just wanted the job done. So - thank you for uploading. Gotta work on my brother's car tomorrow and this is exactly what I needed.
@carychiu36
10 жыл бұрын
Dude!!! I burnt the 100 amp fuse in my '99 Protege on the weekend. I called garages but they weren't open. I looked online and followed your video step-by-step. Instead of I don't know how much a garage would have charged, total charge for me to get my car started again was $4.99 for the fuse and $19.99 for a ratchet set. Thanks a million from Canada!
@starrshine5976
9 жыл бұрын
Cary Chiu Did you buy fuse from "Lordco"? They want $10.00 + tax for same fuse.
@carychiu36
9 жыл бұрын
starr shine Hi, I bought my fuse for $4.99 from Canadian Tire.
@badavis1267
10 жыл бұрын
Your video was right on. Good advice for placing battery "not on concrete". Loved the entire session.
@starrshine5976
9 жыл бұрын
Thanks for video. I totally annihilated my 100A trying to get it out. Dude at parts store 100% useless. I told him I was having trouble getting it out. He was "It should just pull out man....Now you gonna buy it so I can get my commission or what....?" Thanks for video. Now I gotta get in there and get dirty!!!!!!! :-)
@videojeff01
12 жыл бұрын
Thank You, Thank You!! Finally! I found a video that actually shows how to replace the main fuse. You're the only one I've found. All the other videos are shit! Thank You, Thank You, Thank You!!!
@WillKat66
12 жыл бұрын
Thanks alot for uploading this video, i just needed to replace the 100 AMP fuse on my MAZDA Protege 2002 and did not know it was bolted down on the sides. thanks to you; i manage to replace it myself, wife was asking me to take it somewere to fix it. thanks Buddy
@gretchengund8375
3 жыл бұрын
Got it! I'm seasick now from watching, but I've got it.
@PenasGarage
Жыл бұрын
Hahaha yea I was just a kid when I made this video o laugh going back and rewatching
@ruthcat009
14 жыл бұрын
excellent video...I recently had to change the 100 amp fuse on my toyota corolla...
@christopherpratt7898
10 ай бұрын
Thank you. Very informative.
@8.5x11
14 жыл бұрын
Cool, i didn't know that the fuse was tied down with bolts. Also, car not starting, possibly a dead starter. Try banging on it with a hammer then try again. Circuit Tester are a help too (about 15$ at autozone). Anyway, mazda626.net is a good source for info.
@werdchris
13 жыл бұрын
I'm sure you already figured this out, but when I blew my 100amp fuse on my 2005 Mazda 6, there were two other fuses in the inside fuse panel that had blown, specifically the "engine" fuse.
@coolshariq
8 жыл бұрын
My Mazda 2002 Protege 5 is same way. I tried to pull it won't come off than used the screw driver and totally destroy it. lol
@skabands
4 жыл бұрын
Thanks!!
@PenasGarage
12 жыл бұрын
i know i seriously busted the crap out of my fuse i was pulling on it with channel locks and every thing but i finally figured it out !! but hey thx for watching!!!
@PenasGarage
12 жыл бұрын
busted the shit out of mine to lol! it took me awhile to find them bolts lol
@loufernando7617
3 жыл бұрын
Awesome thanks bud
@MrGrumpypoppy
2 жыл бұрын
Awesome!
@thexntrikjay-mo2858
7 жыл бұрын
+brianpena what size socket?
@videojeff01
12 жыл бұрын
yup, I tried wd40 and still no good. in fact, I was applying so much pressure to the wrench that I warped the piece of plastic that the fuse is plugged into.
@CompetentSalesUSA
4 жыл бұрын
Hard to understand. Which screws are you talking about? Thank you
@PenasGarage
4 жыл бұрын
Bills Sawshop there on the bottom side
@CompetentSalesUSA
4 жыл бұрын
Brian Pena Could you show a picture, this is the most important thing in the video. Thank you
@PenasGarage
12 жыл бұрын
its possible that the engine could be blown/seized i put a big wrench on mine and i couldnt get it to turn
@lildevilchild23
11 жыл бұрын
thanx for the vid man gotta change my mx6 one tomorrow its looking a little old and rusty on the inside and broke the top off the one thats in there couldnt figure it out so hanx again
@dianabrabbs4777
11 жыл бұрын
why would you change the fuse i got a promblem with my 97 mazda 626 dx the day before this happened the overdrive blinked on and off all day the next day i got in and drove about twenty miles came to a stop sign and the car wouldnt go i turned it off a few seconds later turned it back on and it drove to the next stop sign and it did the same thing somebody help any suggestions
@jesusramirez000
12 жыл бұрын
i have the same car and it does the same the starer will start but the engine wont anymore i dont know whats wrong with my car minute 8´13
@daltonmichaels3065
4 жыл бұрын
How many wires connect to the 100 amp fuse
@loufernando7617
3 жыл бұрын
👏👏👏
@valinap.8056
7 жыл бұрын
dude where would the horn fuse be located??
@PenasGarage
12 жыл бұрын
have you tryd wd40 if that dosent work get a hole new fuse box from the junk yard
@PenasGarage
12 жыл бұрын
@WillKat66 no problem thanks for the comment(:
@PenasGarage
14 жыл бұрын
@ruthcat009 thank you
@videojeff01
12 жыл бұрын
but unfortunately the screws connecting the cables to the fuse were screwed on so tight that I couldn't unscrew them! so I still wasn't able to get that fuse out of there.
@garystinten9339
7 жыл бұрын
videojeff01 gently crack the nuts forward until you feel them just crack then go backwards..
Пікірлер: 41