Got it! I'm seasick now from watching, but I've got it.
@PenasGarage
Жыл бұрын
Hahaha yea I was just a kid when I made this video o laugh going back and rewatching
@loufernando7617
3 жыл бұрын
I broke the shit out of mines 💀
@loufernando7617
3 жыл бұрын
👏👏👏
@loufernando7617
3 жыл бұрын
Awesome thanks bud
@JohnFleshman
3 жыл бұрын
I never would have figured out that fuse is bolted in place. thanks for the great tip my dude! You saved me hundreds of dollars in mechanic costs.
@CompetentSalesUSA
4 жыл бұрын
Hard to understand. Which screws are you talking about? Thank you
@PenasGarage
4 жыл бұрын
Bills Sawshop there on the bottom side
@CompetentSalesUSA
4 жыл бұрын
Brian Pena Could you show a picture, this is the most important thing in the video. Thank you
@daltonmichaels3065
4 жыл бұрын
How many wires connect to the 100 amp fuse
@skabands
4 жыл бұрын
Thanks!!
@ncvman
6 жыл бұрын
who the f designed a fuse like this. so dumb
@jasonmccarthy820
6 жыл бұрын
I'm going to tell you right now, if you have air in your system, this isn't going to work perfect. The only way to get the bleeder vacuum to work perfect is to drain the entire clutch assembly like I did. Then fill the resevoir up, then use the bleeder, create a vacuum and them pull it out real fast and let it suck in the fluid, re-fill and keep doing it over and over. I couldn't get mine to work for shit like this video is doing, I got pissed, drained the entire thing and then did it. Now it works perfect, I have a full pedal with full pressure. Hope this helps anyone who is trying it like this video and coming up with nothing.
@LSWhat87
7 жыл бұрын
Just ordered a Mityvac and will be doing this on my 2000 SS. Hopefully it works good like in the video
@dombravo7330
7 жыл бұрын
when you say you pulled the tube out with the fluid still in the tube did you need to top off the fluid with the tube still in the reservoir? what kind of fluid, brake fluid right?
@PenasGarage
7 жыл бұрын
sense you are putting vacuum inside the lines when you pull off the mighty vac the slave cylinder is gonna suck down some of the fluid from the reservoir just keep adding to the reservoir so it wont suck air
@GregJoshuaW
7 жыл бұрын
It is super cool we make videos to help each other out with these things. I never had the patience to film myself doing these things, just wanted the job done. So - thank you for uploading. Gotta work on my brother's car tomorrow and this is exactly what I needed.
@zombiekidx3256
7 жыл бұрын
dude how many times do I have to do it
@PenasGarage
7 жыл бұрын
when the pedal gets stiff then your good
@darkcrystal438
7 жыл бұрын
I did similar just now.. tyranny is an M12 T56. I used a vet syringe with clear tubing and similar fitting to yours to plug hole in resiviour. pulled the syringe back to create vacuum and unplugged the tube from resiviour - fluid from the resiviour rushed in.. repeated 4 times till no bubbles came up the tube and clutch is perfect!. I had installed new clutch/slave/braided clutch line. glad I never have to worry about reaching that bloody bleed nipped on the tyranny!!
@R8erz28
7 жыл бұрын
This nigga.. u have to cut the clear tubbing 2" length is enough to save u from pumping it so much.. n there is a bleeder valve on the top of the tranny
@PenasGarage
7 жыл бұрын
theirs no bleeder valve on the tranny and why would i wanna cut the hose worked fine for me clutch feels good
@loukaine9618
7 жыл бұрын
Brian Pena there is a bleeder but it's a bitch to use
@The1972Cutlass
7 жыл бұрын
do I have to feel the fluid reservoir up all the way when pumping, and does the helper just keep pumping the clutch while I use the mityvac, I am trying to use this method on a Honda prelude
@PenasGarage
7 жыл бұрын
yes put fluid . and yea you can have someone pumping pedal
@thexntrikjay-mo2858
7 жыл бұрын
+brianpena what size socket?
@racinhonda450
7 жыл бұрын
worked perfectly great video
@valinap.8056
7 жыл бұрын
dude where would the horn fuse be located??
@coolshariq
8 жыл бұрын
My Mazda 2002 Protege 5 is same way. I tried to pull it won't come off than used the screw driver and totally destroy it. lol
@starrshine5976
9 жыл бұрын
Thanks for video. I totally annihilated my 100A trying to get it out. Dude at parts store 100% useless. I told him I was having trouble getting it out. He was "It should just pull out man....Now you gonna buy it so I can get my commission or what....?" Thanks for video. Now I gotta get in there and get dirty!!!!!!! :-)
@carychiu36
10 жыл бұрын
Dude!!! I burnt the 100 amp fuse in my '99 Protege on the weekend. I called garages but they weren't open. I looked online and followed your video step-by-step. Instead of I don't know how much a garage would have charged, total charge for me to get my car started again was $4.99 for the fuse and $19.99 for a ratchet set. Thanks a million from Canada!
@starrshine5976
9 жыл бұрын
Cary Chiu Did you buy fuse from "Lordco"? They want $10.00 + tax for same fuse.
@carychiu36
9 жыл бұрын
starr shine Hi, I bought my fuse for $4.99 from Canadian Tire.
@badavis1267
10 жыл бұрын
Your video was right on. Good advice for placing battery "not on concrete". Loved the entire session.
@lildevilchild23
11 жыл бұрын
thanx for the vid man gotta change my mx6 one tomorrow its looking a little old and rusty on the inside and broke the top off the one thats in there couldnt figure it out so hanx again
@dianabrabbs4777
11 жыл бұрын
why would you change the fuse i got a promblem with my 97 mazda 626 dx the day before this happened the overdrive blinked on and off all day the next day i got in and drove about twenty miles came to a stop sign and the car wouldnt go i turned it off a few seconds later turned it back on and it drove to the next stop sign and it did the same thing somebody help any suggestions
@videojeff01
12 жыл бұрын
yup, I tried wd40 and still no good. in fact, I was applying so much pressure to the wrench that I warped the piece of plastic that the fuse is plugged into.
@PenasGarage
12 жыл бұрын
have you tryd wd40 if that dosent work get a hole new fuse box from the junk yard
@videojeff01
12 жыл бұрын
but unfortunately the screws connecting the cables to the fuse were screwed on so tight that I couldn't unscrew them! so I still wasn't able to get that fuse out of there.
@garystinten9339
7 жыл бұрын
videojeff01 gently crack the nuts forward until you feel them just crack then go backwards..
@PenasGarage
12 жыл бұрын
i know i seriously busted the crap out of my fuse i was pulling on it with channel locks and every thing but i finally figured it out !! but hey thx for watching!!!
@videojeff01
12 жыл бұрын
Thank You, Thank You!! Finally! I found a video that actually shows how to replace the main fuse. You're the only one I've found. All the other videos are shit! Thank You, Thank You, Thank You!!!
@PenasGarage
12 жыл бұрын
busted the shit out of mine to lol! it took me awhile to find them bolts lol
@PenasGarage
12 жыл бұрын
its possible that the engine could be blown/seized i put a big wrench on mine and i couldnt get it to turn
@jesusramirez000
12 жыл бұрын
i have the same car and it does the same the starer will start but the engine wont anymore i dont know whats wrong with my car minute 8´13
@PenasGarage
12 жыл бұрын
@WillKat66 no problem thanks for the comment(:
@WillKat66
12 жыл бұрын
Thanks alot for uploading this video, i just needed to replace the 100 AMP fuse on my MAZDA Protege 2002 and did not know it was bolted down on the sides. thanks to you; i manage to replace it myself, wife was asking me to take it somewere to fix it. thanks Buddy
@werdchris
13 жыл бұрын
I'm sure you already figured this out, but when I blew my 100amp fuse on my 2005 Mazda 6, there were two other fuses in the inside fuse panel that had blown, specifically the "engine" fuse.
@PenasGarage
14 жыл бұрын
@ruthcat009 thank you
@PenasGarage
14 жыл бұрын
@Citiclown ya buddy ahh that moter is seized
@ruthcat009
14 жыл бұрын
excellent video...I recently had to change the 100 amp fuse on my toyota corolla...
@8.5x11
14 жыл бұрын
Cool, i didn't know that the fuse was tied down with bolts. Also, car not starting, possibly a dead starter. Try banging on it with a hammer then try again. Circuit Tester are a help too (about 15$ at autozone). Anyway, mazda626.net is a good source for info.
Пікірлер