Great video sir, thank you!! I will be replacing mine this winter on a 2007 Ram. I would recommend going one step farther and replacing the Pressure and Return hoses as well as the Cooler hoses (if equipped) and don't forget to bleed the system.
@josepalacios5189
Жыл бұрын
Gracias my hermano !!! Tengo una blanquita igual mismo modelo mismo motor y lo q me dijiste de la rosca y poner la terminal igual y los gasquets de plástico fue genial y esa confianza q me diste de siempre decir SIMPLE yo mismo lo puse quite y puse y Perfecto solo la llevare a alineación y llantas NEW y listo !!! GRACIAS!! Me ahorre 245 Dlls !!!!
@russellarnold6141
Жыл бұрын
explained nicely and good sense of humor keep up the good work thank you
@hgraphix
3 жыл бұрын
This is what I get to do this weekend. Thanks for the video.
@Knudtson1000
2 жыл бұрын
Great Video! You are an awesome motivational speaker. As I was working in mine and having issues breaking loose the fasters right off the start, I would just think you saying “ you can do it “. Thanks brother…
@johnvitz310
3 жыл бұрын
Nice job,,,you probably could do an engine job with a crescent wrench,,,
@deerrudy
3 жыл бұрын
Thanks followed your video yesterday changed my rack. Saved 500 bucks. You omitted a couple parts which would have been helpful which is how to get the rack out. Had to take tire off and it comes out from left. But overall 👍
@aaronmobilemechanictv7841
3 жыл бұрын
Glad to hear it really help you watching my video.
@smurtis1972
2 жыл бұрын
Thank you for the video. You gave me the confidence to do it myself this weekend on my son's truck.
@aaronmobilemechanictv7841
2 жыл бұрын
Yes sir if I can do it you can do it 💪🏼
@castorhernandez4112
Жыл бұрын
@@aaronmobilemechanictv7841 ola amigo es el mismo proseso con una nissan quest
@davidhollis927
2 жыл бұрын
Good video. High pressure side is always the smaller diameter hose.
@robertotorres6110
3 жыл бұрын
when you chingon perica y martillo all its needs..
@jorgesanchez6769
Жыл бұрын
You are chingooooooooon homi Good job congratulations
@ricardobrito8849
Жыл бұрын
Thank you very much for the video I did it because you motivated me to do it I use la perica
@tommydyo6606
Жыл бұрын
Oh my goodness this was helpful! Thanks sooo much!
@mauriciofigueroa5898
8 күн бұрын
Gracias primo por enseñar
@1windozesuk
2 жыл бұрын
"Sometimes I let one loose" haha, I hear that bro, same here!
@aaronmobilemechanictv7841
2 жыл бұрын
Better out than in yeah lol 😆
@Myselfnyou
3 жыл бұрын
4:04 Best part of the whole video...lol
@terrysmith1729
Жыл бұрын
Thanks for helping. I appreciate it very much.
@PatriciaGreer-h4r
7 ай бұрын
Thank you it was very good and helpful
@---gz1cf
2 жыл бұрын
Aye good video bro this has been very helpful you got a new subscriber
@aaronmobilemechanictv7841
2 жыл бұрын
Thank you for supporting my channel please share it. It will help to others
@Canbechangedtwiceeveryfourteen
2 жыл бұрын
Bro I can’t believe how easy y’all got it wrenching on cars that don’t see salt and snow. I woulda rounded off every single bolt I touched with that crescent wrench lol. Got her done though real smooth and showed the important parts good video. Fuckin Bobby full of shit!
@aaronmobilemechanictv7841
2 жыл бұрын
Good stuff huh
@jmathews470
2 жыл бұрын
A f150 dodge ram. Brother you have a 1 of 1. The only one ever built.
@aaronmobilemechanictv7841
2 жыл бұрын
You really think I did a good job on that video ?
@jmathews470
2 жыл бұрын
@@aaronmobilemechanictv7841 hell yeah bro, but there is no such thing as a f150 dodge ram.
@aaronmobilemechanictv7841
2 жыл бұрын
Lol 😆 oh shit my bad I didn't realize that I but a f there
@jmathews470
2 жыл бұрын
@@aaronmobilemechanictv7841 hahahaha 😆😂
@Canbechangedtwiceeveryfourteen
2 жыл бұрын
@@jmathews470 damn bro you really were committed to making dude acknowledge that he made a mistake in spelling the title so you could laugh about it one more time. Tell me if I spell this correctly “douche bag”
@aronnevarez
7 ай бұрын
Lmfao them frogs 😂😂😂😂 great video bro
@timnels8638
Жыл бұрын
Mahalo brother nice video, love learning the Spanish to.
@nickwstp
4 ай бұрын
Thanks for the video.
@jacobgriffith2345
3 жыл бұрын
Ram f150, that's new😂
@mr.ivonahumpallot1189
10 ай бұрын
lmfao 😂 them frogs be sneaking up on every mechanic I know.
@therealyoungspur
2 жыл бұрын
Thanks bro this video helped alot
@moonstar5039
Жыл бұрын
Great job 👍 sire
@matthewgreen3910
2 ай бұрын
Thanks for the video dude! Do you need to bleed the power steering system after replacing the rack and pinion?
@devo1977s
2 жыл бұрын
I wonder if it failed because they had the wrong fluid in it, I have to replace mine plus the pump this weekend and the previous owner had used power steering fluid instead of atf4, yeah dodge uses atf in the power steering 🙄
@did_that_hurt8387
2 жыл бұрын
I agree seen a few videos for the dodge rack and pinion and they all had power steering looking fluid come out instead of the red atf+4 fluid just did my leaking rack on my 04 and it was red
@threedogsmama1764
Жыл бұрын
"You can do it" for me lol. That would be great! 🤣😂
@russellburch5864
11 ай бұрын
Just watch your, and good job, young man.
@michaelpassionsgarage356
2 жыл бұрын
good video rbo, thank you
@mattwirsing6800
Жыл бұрын
Thanks for the video, but if you lived in New England, it's gonna more than a crescent wrench. My return hose would not loosen up. I had to remove the hose from the cooler and then spin the hose to get it off. Then I tried to loosen the nut on the pressed on fitting and tore the aluminum pipe. Ugh! Time for a new return hose.
@fletcherspearman4243
7 ай бұрын
Best how to video ever. Thanks!
@EllisDesignandTradeCo
3 жыл бұрын
Do you have to apply a certain amount of torque to nuts when adding them back on? Thanks for the vid, very thorough. I've been watching tons of repair videos lately and doing things myself and saving thousands. Keep up the great uploads!
@aaronmobilemechanictv7841
3 жыл бұрын
No just tighten up
@Chaos1187me
3 жыл бұрын
Yes. You do. It should be 235 ft lbs. Make sure you do that. Your steering is important. Tie Rod ends 45 ft lbs. Pressure Hose 23 ft lbs. Return hose 52 ft lbs. Maintain your vehicles by the service manual and stay safe. Here is a free download for the service manual as well www.mediafire.com/file/8k5u7yi4olsck17/2004_Dodge_Ram_Factory_Service_Manual.pdf/file
@elblaise5618
2 жыл бұрын
Whenever possible use the specific torque specs. Tight enough can lead to nuts and/or bolts that shake loose or you could over tighten things stripping threads or snapping bolts.
@Canbechangedtwiceeveryfourteen
2 жыл бұрын
Yes and no... it’s complicated lol
@aaronmobilemechanictv7841
2 жыл бұрын
Please Don't forget to Like 👍🏼 this video comment down share and Subscribe thank to support my channel
@relaxwithnature9783
Жыл бұрын
Great video
@alexanaya5088
2 жыл бұрын
Good video
@scottrouwhorst881
2 жыл бұрын
Nice
@elderromero1044
Жыл бұрын
Ya instalada ocupa purgar las líneas o no gracias
@ALIZON578
3 жыл бұрын
Se puede cambiar el rack on pinion con la camioneta asi o se necesita levantar es mire que no la levanto con gato
@aaronmobilemechanictv7841
3 жыл бұрын
Si necesitas el gato
@ndicroce
Жыл бұрын
Great video!!
@gsider13
3 жыл бұрын
Can you tell me where you found this exact part ? How much was the part ?
@aaronmobilemechanictv7841
3 жыл бұрын
Autozone
@sosaas5.755
3 жыл бұрын
When you take the hoses off does the power steering leak all the fluid in the reservoir?
@aaronmobilemechanictv7841
3 жыл бұрын
Yeah it will just get something ready to clog the hole.
@kenmartin3011
Жыл бұрын
I just put my rack in and when the steering wheel is straight the tie rod threads are extremely uneven. One side has over an inch of threads showing and the other has no threads showing. If I loosen the steering coupler at the rack, it only goes on one way. It’s like my steering is half a turn off. When I turn the steering wheel, it turns farther one way than the other. How can I correct this? 2003 dodge ram 1500 4wd
@johnvitz310
3 жыл бұрын
What you call a crescent wrench in Spanish,,,,sounds cool,,,
@aaronmobilemechanictv7841
3 жыл бұрын
It call in Spanish una perika Subcribe to my channel I will appreciate Give a Huge thumbs 👍
@samuelperez2539
Жыл бұрын
Necesito el gato para combiar el rack y pinion o Haci se puede hacer ?
@aaronmobilemechanictv7841
Жыл бұрын
El Gato vas a nesitar
@samuelperez2539
Жыл бұрын
@@aaronmobilemechanictv7841 y le puedo dejar las llantas puestas ?
@aaronmobilemechanictv7841
Жыл бұрын
Si VA estar un Poco complicado
@MrCPPG
Жыл бұрын
Couldn't you just count the turns when you take off the old tie rod?
@franciscocalvillo1281
3 жыл бұрын
I noticed you didn't have to jack the truck up to install. What did you use the floor jack for?
Пікірлер: 78