THANK YOU!This was the fix for my 2012.I purchased the touch screen Launch X431 CRP EBT Elite it worked Perfectly.I had two mechanics tell me the dealer had to flash it.This tool worked seamlessly.I can't say my jeep is a POS It has 165k and my wife's has 200k still going places most vehicles can't.
@robcaldwell5117
Жыл бұрын
Hey buddy. Just wanted to thank you sooooo much! I followed your directions and bought the Launch. Feels great to do things myself and save money. The only challenge I had was figuring out how to release the tabs to pull up on the connector. Watched another youtube for that. This has been driving me crazy for a year and I finally fixed it with your help! Thanks again!!!
@Donnythelatemodeltech
Жыл бұрын
Yeah, that connector is pain in the butt, if I was using one of my better cameras I would have touched on it , but, I was in a hurry and just used the action camera . Thanks for the great comment !
@bowtiebuilding
9 ай бұрын
How did you know you needed to replace the module? I took my jeep to electric “expert” and he told me I had an ABS module from a 2013 on my 2010 jeep wrangler. However we didn’t have an ABS light on but we did have an ESP/BAS light, traction control and the weird thing was the brake lights stayed on with key on and with the jeep running. Hoping the dude doesn’t tell me I need a new module and then need to program it. Might cost you to $800
@dangerousfreedom4965
2 ай бұрын
@@bowtiebuilding how much you want for the 2013 module?
@forte1174
29 күн бұрын
What year is your jeep?
@beaubuchheit7345
2 ай бұрын
@Donny The Late Model Tech. Wanted to give you a huge thank you for this video. I replaced the ABS Module (used/rebuilt) in my 2016 RAM 1500 and had to reprogram it. I bought a Launch X431 CRP919E Elite from Amazon and followed your steps. Saved me $$$ and time. Thank you sir!
@Donnythelatemodeltech
2 ай бұрын
Glad it worked!
@freebehindbars8654
Ай бұрын
$130/shop time vs $465 for this to program? I get you have the device after, but it didn’t save you money. The video and installing yourself sure will. His video was on point.
@JamesDavidCaldwellJR.-el2dg
24 күн бұрын
Thanks for your help with the video. I have a 2016 JK and had to replace the pump as well because the electrical unit is currently indefinitely unavailable through Mopar. When I installed the Full ABS unit the traction control light remained on ams the cruise was disabled. I bought the Launch unit (keep in mind that Launch USA does not take questions on nor service models bought on Amazon or Ebay) similar to yours and after running the initialization program the traction control light went off and the cruise works. I also bought the used module with my VIN pre-programmed. The scan tool at first recognized the used VIN and would not re-write the new VIN, but when I ran the initialization my VIN magically appeared on the updated ABS unit. Still have to bleed the unit as my brakes are softer but good for the moment.
@Donnythelatemodeltech
24 күн бұрын
Really appreciate the comment on this issue. Lots of people asking about used - vins - and really had no answers. Most appreciated. Friendly reminder to use that scanner to bleed the brakes to get it done 100%.
@justsomeguy4319
3 ай бұрын
What feature does your scanner have to have to reprogram the vin for the abs module
@kylehatfield8491
3 ай бұрын
Thanks buddy! Replacing one tomorrow on a 2015 jeep, hoping the used ethos scanner I bought will work. If not I’ll buy this scanner through your page.
@Donnythelatemodeltech
3 ай бұрын
Good luck 👍
@kylehatfield8491
3 ай бұрын
Welp parts just informed me the ABS module is on restriction till mid July 🤦♂️. On to the next one lol.
@Epicfunk
7 күн бұрын
Did you try just reprogramming in old module to see if that works?
@FireePops
2 ай бұрын
Trying to replace the module on my 14' Wrangler, and i can not find it anywhere because it's discontinued. Where did you purchase yours from? Or do you have any other suggestions?
@frenchcurse7287
7 ай бұрын
yeah i love this video u teatch me alote thank you for ur time
@TrueWarOutside
11 ай бұрын
Hey I got a 2010 Jeep wrangler unlimited Sahara. I checked online to see if the part number will be the correct fit for my jeep but different online mopar sites say it doesn’t fit. I’ve been looking for a year trying to find the right part so I don’t mess up my jeep and waste money. I just want to know if it fits and works fine for your ‘08, you think it will do the same for my ‘10?
@Se7vinDeadlySins
Жыл бұрын
Did you the leave the scanner plugged in while you were driving around? My BRAKE light comes on intermittently, so this will need to be done soon for me. And can I use the LAUNCH to program a instrument gauge cluster?
@Donnythelatemodeltech
Жыл бұрын
Check the level of you brake fluid?
@4csfabrication621
Жыл бұрын
Great video, did you have a VIN discrepancy before or during the initialization? I am currently getting that IDK..
@Donnythelatemodeltech
Жыл бұрын
No issues at all , everything in the video is exactly how it went down
@Donnythelatemodeltech
Жыл бұрын
Just a heads up, there are a couple different modules for the different years, make sure you have the correct part.
@richarddiaz8248
11 ай бұрын
I have a 2012 jk but bought a 2018 abs guess it won’t work even with a scanner like your s
@Donnythelatemodeltech
11 ай бұрын
I've never tried to program a newer abs module on a older jeep.... Let us know if it works.@@richarddiaz8248
@sheerwillsurvival2064
Жыл бұрын
Excellent video 👊🏻👍🏻 Iam sure mine will go out eventually
@Donnythelatemodeltech
Жыл бұрын
Fyi, 07-11 abs module are a little hard to find.
@sheerwillsurvival2064
Жыл бұрын
@@Donnythelatemodeltech great that’s what mine is 😳 so far so good 🫰🏻
@daze1780
Жыл бұрын
Had to drive an hour and a half away to find my exact module I returned, installed it , found out it had to be initialized. Can't believe you just dropped this video. Gave me all the info I need to finish this job . Thank you bro! Awesome job saving people time and $
@Donnythelatemodeltech
Жыл бұрын
@@daze1780 no problem! Let me know if you have any questions.
@sstjacques
11 ай бұрын
I have Autel bidirectional scanner that I need to do this on, thanks, part looks easy to swap.
@maggiepup3377
9 ай бұрын
That scanner is on sale right now. $107. Amazon. Thanks for video.
@ngo-taara569
8 ай бұрын
😢
@Donnythelatemodeltech
8 ай бұрын
Ah, probably not.
@not-AI
Жыл бұрын
Is this for a brand new replacement? I can't find new but I can see used ones. Can you reprogram a used one?
@iceburg2442
5 ай бұрын
I used the link and bought the exact same launch unit and all my options are different. Doesn't say 16 pin connector, no where does it have special features. Are there updates i need to pay for?
@BABAYAGA-d5t
Жыл бұрын
3month back order for this now. 2018JLU. They must all be shitting the bed. No recall is crazy.
@CityMotorsllc
8 ай бұрын
Can you use a used module? If so do you need the vin to the donor?
@francofornero580
7 ай бұрын
It does work, I just did it. Don’t need anything other than the tool to program it
@NorteAbroad
6 ай бұрын
So I have a 2015 renegade, bought a used abs module, but it won’t let me clear the donor vin and record mine. Do you have any idea of how to make it work?
@francofornero580
6 ай бұрын
@@NorteAbroad i don't remember, I'm pretty sure I did exactly what the guy in the the video did but I also remember that a new code appeared regarding the inconsistencies of Vin number with the module so I would press on that code and check if there is any function/action to do. let me know if that works, I don't have the code reader with me rn to check exactly how to do it but I can check tomorrow
@NorteAbroad
6 ай бұрын
@@francofornero580much appreciated. What’s the model of the launch you used?
@francofornero580
6 ай бұрын
@@NorteAbroad Launch x431 CRP919E elite
@ryanmlowder
Жыл бұрын
Just checking to see if the lights stayed off? My dealer wants $1400 to do this repair including the module. I'm thinking I'll try this if it's been successful.
@Donnythelatemodeltech
Жыл бұрын
Yes , no light.
@AirportBaptist
8 ай бұрын
My dealer said $1600 plus the 338.55 part which won't be available until mid April. Dealer rip off!
@TheBlakeFlowers
4 ай бұрын
Will this work with a used one , mine went out and could only get a used one
@FishOrDieTryinTV
Ай бұрын
Where did you find used Module
@TheBlakeFlowers
Ай бұрын
@@FishOrDieTryinTV junkyard but I ended up getting a electric repair store to redo it, and that fixed everything
@stinkymcstinkerton1854
Ай бұрын
Are you able to program keys ?
@huntertrahan8618
Ай бұрын
can you program all of the modules if anymore become an issue?
@Donnythelatemodeltech
Ай бұрын
It won’t program a pcm - only a dealer tool.
@omarrodriguez1593
Жыл бұрын
A question? I can program the ABS module with Launch x431.
@Donnythelatemodeltech
Жыл бұрын
👍
@r.w.199
10 ай бұрын
Any other scanners available with that option? What should I look for?
@AngelSantiago-y7r
6 ай бұрын
How you get to 16 pin connection??
@tonyshannon9862
5 ай бұрын
Donny, which model of the Launch scanner are you using?
@Donnythelatemodeltech
5 ай бұрын
Info and link in the description. Let me know if you have any questions
@Rrsnow850
11 ай бұрын
I replaced my module and I did the procedure. it says it was success but still shows the code with symptoms. I never cleared the old vin from the new module. Is that something that needs to be done in order for it to properly work?
@Donnythelatemodeltech
11 ай бұрын
The new module is used?
@sanityapparel
Жыл бұрын
Launch hit me up to do a sponsor video for them but they wanted me to buy it first. While i may have a use for one the cost made me say, maybe some other time. I didn't really like that it only worked on some cars. Maybe my channel will have to rethink the option.
@crunchytacosupreme9371
6 ай бұрын
Can I put a used module instead of a new one?
@alialwakil9322
6 ай бұрын
How much does it cost for a new one?
@ricardochaparro-i2m
28 күн бұрын
i have a shop, all my customers with Wrangler had to replaced that ABS module, what horrible cars, and people still are buying that piece of junk . 4runner for ever!!!!
@joshb7677
28 күн бұрын
Bro so funny, I have a 2015 wrangler which brought me to this video, and my main vehicle is an 06 4Runner. Best vehicle ever.
@ricardochaparro-i2m
22 күн бұрын
@@joshb7677 2010 toyota sequoia with 268k miles. how many abs module ? zero, starter motor 1, alternator 1, air pump 1,
@FishOrDieTryinTV
Ай бұрын
Part on backorder for eternity 😢
@tonycastro6154
6 ай бұрын
you cant reprogram vin number uinless its a new ecm,,,,
@forceuser609
3 ай бұрын
My 2014 dodge avenger is making me want to eat a bullet, this is so frustrating.
@freebehindbars8654
Ай бұрын
$465 for that seems high. Esp with the reviews it has.
@sseryoga
5 ай бұрын
Good day We specialize in repairing faulty electronic components in vehicles. We would be delighted to collaborate with you and sponsor repairs featured in your KZitem videos. Please let us know if you are interested in this opportunity. Thank you for your time and consideration.
Пікірлер: 73