√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@He8MyHand
4 ай бұрын
Don’t need to remove calliper carrier, don’t need to remove disc, don’t need to remove abs sensor just remove both brackets from the arch/shocker. Don’t need to remove driveshaft from gearbox at all you can do it in place, just wasting gear oil. Also best if hitting the edge of the cv joint with a hammer rather than hitting it internally with the brass, less likely to damage the internals. Also using a zip tie is a BIG no no it’ll just come off and you’ll lose your grease 10 miles down the road.
@johnjoseph7382
Жыл бұрын
guys, just cut the band don't use a punch, you don't want to damage the cv joint surface as it may leak grease when driving
@deluxegdm7435
Жыл бұрын
Don’t need to take out the brake rotor to get the axle out.Not sure if you have to do the same procedure with the abs model.
@user-LYK.
Жыл бұрын
good video
@iamfinally
2 жыл бұрын
did you put the drainage of the tranny fluid back into the transmission??
@zakkajek1513
2 жыл бұрын
Same question
@johnjoseph7382
Жыл бұрын
they will rarely leak unless you have that side lower than the other side
Пікірлер: 10