Buy Now!
New Control Arm Mounting Bracket from 1AAuto.com 1aau.to/ia/1ASLF00206
This video shows you how to install a new upper control arm mounting bracket on your 2002 -2007 Chevrolet Trailblazer.
This process should be similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer
Tools you will need:
• Pry Bar 1aau.to/o2E/1AXAA00020
• 21mm wrench
• 19mm Socket 1aau.to/oas9/1AXAA00043
• 21mm Socket 1aau.to/oas9/1AXAA00043
• 1/2 Inch Ratchet 1aau.to/oas9/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/obra/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obMu/1AXAA00015
• Torque Wrench 1aau.to/oaUB/1AXAA00044
• Gloves 1aau.to/oaAh/1AXSS00048
• Safety Glasses
• 7mm Allen Wrench 1aau.to/ocU/1AXAA00007
• Floor Jack 1aau.to/oaiG/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o6W/1AXAA00065
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Негізгі бет Автокөліктер мен көлік құралдары How to Replace Front Driver Side Lower Control Arm Mounting Bracket 2002 -2007 Chevrolet Trailblazer
Пікірлер: 2