In this video, I will be demonstrating how to replace the high-pressure power steering hose on a 2002 Acura TL-S. Over time in older Honda and Acura vehicles, these hoses can wear out due to the extremely high pressure produced by the P.S. pump, which can be as high as 1500 PSI! This can result in the hose forming a leak, which usually occurs where the rubber hose and metal line meet.
If it's an option, you could drop the catalytic converter, and the hose will simply drop straight down. However, these exhaust bolts tend to get extremely rusted over time, and this simply isn't an option for most people. It is possible to remove the hose from either the top or the bottom, but either way, what makes this job much easier is removing the Front Strut Bar and having two people guide those hose out so it doesn't get caught on anything.
Tools and Parts Needed for this Project:
High-Pressure Power Steering Hose, Feed - Acura (53713-S3M-A02)
Power Steering Pressure Switch O-Ring (7.8X1.9) - Acura (91304-P0H-013)
14mm Flare Nut Wrench
7/16" O.D. Vinyl Tubing - www.homedepot.com/p/UDP-5-16-...
3x 12oz Bottles of Honda Power Steering Fluid - amzn.to/3s54uYI
2001 2002 2003 01 02 03 Acura TL TL-S TL Type S CL CL-S CL Type S Base Premium 3.2L V6 Incineration Incin3ration
Негізгі бет Автокөліктер мен көлік құралдары How to Replace Leaking High Pressure Power Steering Line - 2002 Acura TL-S
Пікірлер: 54