Just wanna say I have this car and your videos have helped so much I appriciate you my brotha I hope Nothing but too the moon for you my friend
@CarRepairsMadeSimple
3 жыл бұрын
Thank you very much! It’s a fantastic car and I’m glad my videos have been helpful!
@fata3176
3 жыл бұрын
Just bought a 2003 tl type s and I enjoy watching your videos. Keep it up 👍👍
@CarRepairsMadeSimple
3 жыл бұрын
Thanks for watching! I appreciate it!
@OPayton
Жыл бұрын
Thanks for the video, I literally did everything you said except change the hose now my power steering has no noise... Lando from Saint Louis, Missouri Thanks
@CarRepairsMadeSimple
Жыл бұрын
Awesome! Glad to hear my video has helped you!
@CitizenPerkins
3 жыл бұрын
Nice video, sir! I've had that problem before (after having a new PS pump installed) but didn't know how to get rid of it. I think it's gone now but the next time I start my '02 TL-S I'll be listening for it. 👍
@CarRepairsMadeSimple
3 жыл бұрын
Thank you! It's an easy & affordable fix!
@raymondcostello2798
13 күн бұрын
Thanks!
@CarRepairsMadeSimple
13 күн бұрын
You are very welcome! I'm glad you liked my video, and thank you so much for the Super Thanks! :)
@jessicaortiz3552
Жыл бұрын
Most helpful video I have seen. Thanks! Definitely should make more videos.
@CarRepairsMadeSimple
Жыл бұрын
Thank you! I know, I’ve been a little MIA lately, but I got a few videos coming up this summer for sure!
@MacInAction
3 жыл бұрын
Another awesome video, Incin3ration. Keep em' coming. I wish I knew about this 5 months ago. My mechanic charged me $600 to replace the power steering pump on my 02 TL Type S. I suspect all that was needed was replacing the O-Ring. 1 Question - would you recommend replacing the O-Ring on a regular basis? Like once a year? Or just listen for the power steering noise on a cold start as you demonstrated? Also totally unrelated but what type of gas mileage are you getting? Mine has 225k miles and I'm averaging around 270 miles per fill-up using 93 octane. This is almost exclusively city driving. Billy
@CarRepairsMadeSimple
3 жыл бұрын
This is the first time I've had to replace this o-ring in its 317,000 mile journey, I would say listen for P.S. noise and replace it as needed! And it also depends on the commute. With my current drive to work, I'm averaging 79mph mostly on the freeway and I'm getting 23mpg and around 400 miles per tank. Last month I took a day vacation where a majority of the drive was 65mph highways and backroads, and I got 26.8mpg and could have gotten 450 miles. These cars do get 19mpg city, so I would say 270 miles is on the low end, but I don't know how accurate the city mpg estimates are.
@KENEVERETT1
8 ай бұрын
😢😢😢😊😮❤❤jj bj v.
@HarlowSinn_95
3 ай бұрын
Hey man so i just installed a new pump and new o rings but im stilling getting the whining noise, didnt change the hose so that might be it or is it possible that the belt is to tight or to loose? Would love to hear your thoughts thanks for the vid!
@CarRepairsMadeSimple
3 ай бұрын
It’s possible there’s simply still air in the system too. There are only a few possibilities. Try following the final part of the video by holding the rpm’s up and turning the steering wheel.
@erikcastro5321
2 жыл бұрын
You are the man
@CarRepairsMadeSimple
2 жыл бұрын
Thank you! Glad my video could help!
@A_reel_job_fishing
Ай бұрын
How long did your Acura go? Just picked one up.
@CarRepairsMadeSimple
Ай бұрын
@@A_reel_job_fishing about 347,000 miles so far! A lady side swiped me a couple months ago, so I’ve been slowly fixing the car this last month and hopefully will get it back on the road soon!
@james_schneiderwind
Жыл бұрын
Great video! I'm trying this on my TL right now, but unfortunately I just can't get my wrench around the bolt for the inlet joint. I've been trying on and off for several hours now with no luck, and was wondering if theres anything else that should be removed to make it easier to get to
@CarRepairsMadeSimple
Жыл бұрын
Hard to say without being there in person. You could remove the plastic engine cover and the ignition coil cover to potentially give you more working room.
@james_schneiderwind
Жыл бұрын
@@CarRepairsMadeSimple thanks for the quick reply man! I'm gonna keep going at it and I'll lyk if I'm successful!
@james_schneiderwind
Жыл бұрын
@@CarRepairsMadeSimple I ended up just taking the whole pump off to get to that bolt, and after I replaced the o-rings and drove it around for a bit the annoying whine I was hearing before went away! Thanks for making this video man! It was really helpful! Unfortunately I think I’ll still have to replace the pump though because the bearings seem pretty worn out and don’t move freely when you turn the pulley. Anyways, that’s a project for another day. Thanks again for your help!
@CarRepairsMadeSimple
Жыл бұрын
@@james_schneiderwind you’re very welcome! Glad my video helped you!
@champsweet1668
11 ай бұрын
Im scared that once i take it off, im gonna drop the bolt, never to be seen again.
@CarRepairsMadeSimple
11 ай бұрын
You should be okay. Plus with the paper towel under the inlet, that should catch it if you drop it
@champsweet1668
11 ай бұрын
@@CarRepairsMadeSimple Hope so, im gonna hope replacing the oring and not doing a flush will be enough to make the noise go away.
@kayso12
8 ай бұрын
By the inlet. Did u just use a regular wrench to remove the bolt or how did you do it? I’m struggling to remove the inlet which is the only thing left. But I’m not able to reach the bolt
@CarRepairsMadeSimple
Ай бұрын
sorry for not seeing your comment, I never saw a notification! I'm sure you've already finished this project, but yes, I used just a wrench to remove that bolt as visualized at 5:50 in the video. Thanks for watching
@Geetavish
2 жыл бұрын
Thank you for your instructional video. I have a 2003 Acura TL with the same aluminum inlet. I was able to remove the inlet with a 10 mm wrench but having a tough time to reinstall it. The screw keeps falling. How do you manage to remount it back?
@CarRepairsMadeSimple
2 жыл бұрын
I think I simply started it by hand and then snugged it down with the wrench. It's definitely a tight squeeze in there. If you need a little extra room, maybe you could remove some of the plastic trim covering the front spark plugs and the engine.
@Geetavish
2 жыл бұрын
@@CarRepairsMadeSimple Thanks once again. This time I covered my index finger with a Rubber Finger Tip ( that you get at Office Depot) to thread the screw by hand. Previously the finger was hurting due to the sharp edge of the screw of the Inlet. To protect the screw from falling I tied the screw with a small thread (used in tailoring) with the other end tied to the 10 mm wrench. This way I was able to pick up the screw whenever I dropped it. Finally I succeeded in screwing back the inlet with the new O ring. Boy, what a thrill, to see the Acura running again without any noice!
@CarRepairsMadeSimple
2 жыл бұрын
@@Geetavish I'm glad this worked for you! Nothing better than a nice quiet ride!
@chrise.321
2 жыл бұрын
@@Geetavish clever idea using string to hold onto a screw!!
@rgeorge2
2 жыл бұрын
Great video! Would you happen to know the size of the screw? Mine fell in somewhere and its hard to reach. I’ll have to use the string next time.
@guitarded10
3 ай бұрын
Can this also create foaming power steering fluid?
@CarRepairsMadeSimple
3 ай бұрын
It certainly does. Foam is a mixture of air and fluid, so this video very well could be the solution for you.
@bodhitree1128
2 жыл бұрын
Thank you
@CarRepairsMadeSimple
2 жыл бұрын
You’re welcome! Thanks for watching!
@MacInAction
2 жыл бұрын
After replacing with a new o-ring and hose and filling with new fluid to the top line, the whining sound went away but after driving twice on short trips I saw some new fluid spilled in my driveway. The level was down to the lower fill line. While running and checking for leaks, I saw the fluid reservoir bubbling. Not sure exactly what’s going on here. Any ideas?
@CarRepairsMadeSimple
2 жыл бұрын
Luckily there aren't many lines associated with the power steering system. So compare where the puddle under your car is with the parts diagram on acurapartsforless.com, and that should give you a good idea of which part/s are bad. The bubbling is because the fluid level is so low.
@bostonmonster58
2 жыл бұрын
What do you recommend on keeping your Acura TL last longer. I saw yours has a lot of miles on it, and it seems it’s going strong. I have a 2001 TL with 185,000 miles, so far so good for me!
@CarRepairsMadeSimple
2 жыл бұрын
The most important thing to keep up on is the transmission fluid and filter. You want to do a single 3-quart drain and fill every 15,000 miles and change the exterior ATF filter every 30,000 miles. I have another video on my channel with lots of more information on it. And like with any other vehicle, simply keep up on all the other fluids too!
@cjsnow539
3 жыл бұрын
How can I contact you? I have same car. Want to keep up on things and maybe share some things with you Thanks CJ
Пікірлер: 47