Buy Now!
New Shock & Spring Assembly from 1AAuto.com 1aau.to/ia/1ASTS02224
A shock and spring complete assembly simplifies installation. You don't need to separate the spring from the shock absorber. This video shows you how to install a new shock and spring assembly designed specifically to fit your 2001-2005 Honda Civic.
This process should be similar on the following vehicles:
2001 Honda Civic
2002 Honda Civic
2003 Honda Civic
2004 Honda Civic
2005 Honda Civic
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oqj/1AXAA00013
• Pry Bar 1aau.to/oew/1AXAA00020
• 14mm Wrench 1aau.to/oeo/1AXAA00010
• 14mm Deep Socket
• 15mm Socket 1aau.to/oqm/1AXAA00015
• 17mm Socket 1aau.to/oqm/1AXAA00015
• 19mm Socket 1aau.to/ohb/1AXAA00043
• 1/2 Inch Breaker Bar 1aau.to/obd/1AXAA00078
• 3/8 Inch Breaker Bar
• Ratchet 1aau.to/orC/1AXAA00016
• Torque Wrench 1aau.to/ojN/1AXAA00044
• Anti-Seize Grease
• Brass Punch
• Center Punch 1aau.to/oaH/1AXAA00055
• Floor Jack 1aau.to/oeN/1AXAA00068
• Jack Stands 1aau.to/oev/1AXAA00065
• Rubber Mallet 1aau.to/oac/1AXAA00413
Subscribe: / @trq
Check out our playlist:
Honda Civic 2001-2005 7th Generation: • Honda Civic 2001-2005 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Негізгі бет Автокөліктер мен көлік құралдары How to Replace Right Rear Shock 2001-2005 Honda Civic
Пікірлер: 8