Your professionalism and clear information delivery and clean language use is refreshing and enlightening. Thank you, blessings, and keep it up!
@JeremyFieldingSr
7 жыл бұрын
Thank you
@mwatkins2464
6 жыл бұрын
I don't know if this might help you but thought I'd let you know this. I've been trained and have been in the hvac/r and electrical fields since 1987 and the way we find the common, run and start are by checking ohms. The highest ohm reading is always between the start and run windings, the lowest ohms is between common and run windings . If you want to check what kind of shape the windings are in then After getting all these ohms readings if you add the 2 lowest ohms together they should equal the highest ohms reading. If they don't equal out then there's a problem in the motor windings that may cause a failure very soon. This way is used in checking a compressor on a heating/cooling unit but should also work on motors since the compressor is just a motor also. Take care
@sampickett3843
7 жыл бұрын
Found your channel while surfing. I am now a subscriber. I love great teachers like you.
@jimhester2004
7 жыл бұрын
Fascinating. Very well made, and a lot more logically explained than most videos I see. Having basically no prior knowledge about motors, I'm finding your tutorials very helpful. Thanks.
@tonymann8765
4 жыл бұрын
Getting back to basics- I love it. About 10 years ago, Bill Mayo, a Shopsmith rebuilder in Florida, showed me how to take a Shopsmith headstock motor apart & connect a DPDT switch to have both forward & reverse motor rotation. Kinda like surgery. Like you mention, simply looking for the thinner wires made it easy to locate the starting winding. After the first one, only took 15-20 minutes to do. Bill had spent some time in a motor rebuilding shop. Not sure if they even exist anymore. Thanks for sharing.
@ronbpalmer9389
3 жыл бұрын
I find myself coming back to your videos over and over for two reasons when I need practical implementation information 1. You address the needs of someone teaching themselves and 2. Your explanations are very well articulated. I think the fact that you taught yourself keeps you focused on the real world which is very valuable. People who are formally educated are often good at delivering theory but fall short in practical application. I highly recommend your videos to anyone who needs to actually get things done.
@aisotton
3 жыл бұрын
Thank you Jeremy! I just reversed a motor with these instructions so that I can use it for the old lathe that I got. I really appreciate what you do!
@zsemberigabormate6581
3 жыл бұрын
Precisely explained!! I got the answer for the question I was looking for for 2 days! Awesome, I owe you!
@cmgray74
Жыл бұрын
I found a compressor - 21 Gallon 3/4 HP - Craftsman...After watching your video I replaced the capacitor. dressed up the motor switch. And I saved it from the dump and its inow in service in my rear pole barn. Thanks for the videos!
@joerosburns5639
6 жыл бұрын
You are the best motor engineering and physics teacher I've ever encountered.I have worked in theater and film/tv as an electrician for 40 years. I've tried to learn theory of electricity and motor control as part of my professional development. You are the BEST resource on the internet for straightforward, concise, and lucid explanations of theoretical and practical information!
@JeremyFieldingSr
6 жыл бұрын
+Joe Ros Burns thank you!
@Good-Enuff-Garage
2 жыл бұрын
here here
@caddiman9834
5 жыл бұрын
I just started watching ur videos and i find them very interesting. Im not into this kind of stuff but i must be honest and admit that u have helped me in so many ways and in helping me use this type of application in motor vehicles. Im a gear head and u would be surprised on how i used ur ideas and methods in cars. So i want to thank u and say keep up the good work and keep enlightening us with ur intelligence. 👍✌️
@Edgardocelectric007
5 жыл бұрын
As a electrician your video is a good refresher, I did motor control back when I was an apprentice back in 70s
@mikemichelizzi2023
7 жыл бұрын
Thanks for putting in the work to make these videos. The extra effort like mounting the exposed universal motor to better show its construction definitely helps. I look forward to both more of this series and more of the ways you deal with writing in a small space.
@echobot7100
3 жыл бұрын
Thank you for saving me a lot of time with my project! Your delivery is excellent.
@PhillipShockley
3 жыл бұрын
Jeremy You do amazing work. You make really complicated things very simple. You truly understand what you are teaching as Albert Einstein said "If you can't explain it simply, you don't understand it well enough." Thanks!
@Good-Enuff-Garage
2 жыл бұрын
yeah, tell that to my college professors, ha ha
@gilbus4989
6 жыл бұрын
I think this video might have answered my question about reversing rotation on my drill. Now I have to figure how to wire the DPDT switch to do it manually. Thanks Jeremy
@bobf12
7 жыл бұрын
good video.straight to the point and no distracting music.
@dfu1685
Жыл бұрын
Again outstanding. I thought the speed of your explanations and depth of specifics was perfect in this video. Thank you so much!
@EmancipatedSquirrel
7 жыл бұрын
I have been subscribed to TPAI before finding your channel. Funny part is I found your channel as a recomendation after watching one of his videos. Have an awesone day! :)
@MJCPeters
7 жыл бұрын
I am more knowledgeable today than yesterday, thanks to you!
@georgeeads8689
7 жыл бұрын
I like the way you explain how the motors works. You explain it simply so regular people can understand. Great video.
@JeremyFieldingSr
7 жыл бұрын
Thank you!
@kerrygleeson4409
7 жыл бұрын
Jeremy great work ,you are very clear and easy to listen to and today I have learnt something new thanks From down under Australia
@dabradz
5 жыл бұрын
thanks mate .. from Oz .. my son was putting an AC motor on a planer & found your video really good .. U DA MAN !! :-)
@TIRCQ
4 жыл бұрын
Came for info years later... thank you for your great work and knowledge share. Greetings from Costa Rica! Pura Vida
@8ohmrecords
6 жыл бұрын
Your presentation is great buddy, informative and easy to listen to, keep it up!
@lesstime1678
5 жыл бұрын
Sir let me tel you a short story, you are exactly like me, i work on 2 motor shops on my life,for about 20 years ,i love motors and generators ,but a"m retiring know but i have so many motors in my house ,,,(all kind motors ,DC ,AC SINGLE PHASE, 3 PHASE, all sizes etc,etc and i can not resist play whit motors, even before i start watch this video i play whit a setup G M (MOTOR GENERATOR ) i have in my basement just to see this babies runing on the bench , let me say that,,,,, you are very smart person and a good teacher ,you know what you are doing,tanks for teaching this stuff the right way , i can see you love motors like me ,good bless you end enjoy teaching ,TANKS
@ford56798
7 жыл бұрын
Great explanation,very clear and understandable! Keep up the good work!
@JoshuaJonah
7 жыл бұрын
I'm loving this video series. I tend to buy air compressors with broken pumps. A great cheap source of high horsepower motors.
@oxbowfarm5803
7 жыл бұрын
Thanks for the great video and the very generous links to other great motor video. I keep adding your motor videos to my reference playlist. Love your channel.
@gebular118
7 жыл бұрын
You make very good videos. They are clear, concise, and well presented. You often recommend that viewers research subjects on their own to wake up that creativeness inside them. Your videos are useful and just fun to watch. Keep going!
@JeremyFieldingSr
7 жыл бұрын
+JOHN GEBHART thank you John. This kind of comment is very helpful to future videos as well.
@boomblooka
7 жыл бұрын
I bought a bunch of motors at an estate auction. Three washing machine motors, a couple beefy old induction motors with capacitor on top, a big 220v motor, one with a gear reduction, and a big variac that they thought was a motor. All that went as one lot that no one else bid on, so I got it for $1.
@joseluisrodriguez5302
6 жыл бұрын
it´s a robbery Sir !
@seedsman02
3 ай бұрын
This advice is invaluable mate, I have been looking for you. Wonderfully explained and I now can say hi to the washing machine in the corner lol
@claytonc.7261
2 жыл бұрын
You are a great teacher my friend.
@ronblake2585
5 жыл бұрын
Jeremy- I knew you would save me. I bent the shaft of a Harbor Freight band saw and put on a craftsman motor I had only to find it went the wrong way. I went right to you for this video and presto! You're like some motor savant or something. You know your shit. Thanks so much for sharing your knowledge. Ron
@ronsmerczak5795
6 жыл бұрын
Than you. All sorted, Very very helpful!!!! Got 3 washing Machine motors to sort out. Regards from South Africa,
@NathanNostaw
7 жыл бұрын
Great video, Thanks. Clear instructions and easy to understand.
@vincenttelfer4206
6 жыл бұрын
I'm gonna have to watch this a few more times.
@kengamble8595
7 жыл бұрын
Looks like you watch about the same stuff that I do ! Also seems like you're doing a lot of the same things that I've done, twenty years ago ! I've always hated wasting anything so would salvage most if not all of parts for my project. I didn't have the Internet for information at the time so you are lucky to have that now. You have good content and are growing your channel so keep it up, like it's said " If you build it, they will come " Thanks for sharing and take care.
@vincenttelfer4206
6 жыл бұрын
Ken Gamble then make your own video with something interesting.
@StormbringerMM
7 жыл бұрын
Ha, got the same tach yesterday - thanks for the info, this will be useful in my wiring troubles to bring it back into use. I haven't been able to solve the runaway velocity problem yet - still busy restoring me old lathe
@justchris846
7 жыл бұрын
Great Videos! You really should make one showing how to build an electric motor, where the theory applies to any size build/application. Show things like where to get bearings that the shaft spins on, what type of wire to use, what type of shaft is used to make it and where to find it.. etc..I like your videos. keep up the good work!
@GalenCop9
Жыл бұрын
Excellent video...this should be what I was looking for on a motor I'm wanting to change the rotation on! Thanks!!
@bmitchizzle
Жыл бұрын
Please keep them coming. Very excited for a whole series on your new, industrial robot. Reverse engineering, episodes on individual smart design/engineering elements, maybe a while Jarvis 2.0 where you simply reproduce the giant with considerations/adaptions for its smaller stature.
@Ohm51
3 жыл бұрын
Thank You for explaining some of this ... I am fairly clueless about these things.
@Jhelm
6 жыл бұрын
Great job explaining. There is only so much you can learn from a book.
@dustindavy4319
Жыл бұрын
You're awesome, Jeremy. This was very helpful. I need to reverse the rotation on an attic exhaust fan and for some reason can't find documentation or a diagram online. Thank you!
@davesstuff1599
7 жыл бұрын
Love this stuff, right up my alley. I only have five welders.
@MarkMcCluney
7 жыл бұрын
excellent vid Jeremy, I'll be back soon with my notebook! thanks for sharing.
@dennistuescher7982
3 жыл бұрын
Just happened to come across your video and liked it so much that I had to subscribe.
@arthurf8651
7 жыл бұрын
Thanks for the videos. I have a home shop and all your videos help.
@Tim-kryan
9 ай бұрын
Thank you for this explanation of how to reverse the direction of motors. I didn't even know for sure if it was possible without rewiring the motor. I made a mount for a motor onto a meat grinder. Once it was all hooked up, the grinder spun the wrong way. 😢 I didn't want to re-mount the motor to where it would be hanging off the back. My motor says on the tag to switch the red and black wires to change CW/CCW. Easy! Thanks
@benchtopwoodworks
7 жыл бұрын
great video Jeremy, thanks for posting!
@patcb829
7 жыл бұрын
What a great video, learned so much.
@Portrayalpress
6 жыл бұрын
Super videos Jeremy. Well done! Thank you.
@ThePwcj
7 жыл бұрын
Thank you for the great info and video. Paul.
@buddyupshaw6004
7 жыл бұрын
you have opened a new world for me .thanks
@JeremyFieldingSr
7 жыл бұрын
You sir are why I do this. Thanks for letting me know.
@scania357
5 жыл бұрын
New sub, like the way you explain things. Will be watching more of your stuff. Thanks for posting
@thejaebeing
6 жыл бұрын
Love your videos. Much respect.
@zombieprinting2670
4 жыл бұрын
Just subbed and lovin the channel. Thanks for the clear descriptions :)
@TheOpenAirGarage
7 жыл бұрын
Some very good information in this video. Good Job.
@confabrication
7 жыл бұрын
Thanks, Jeremy, for answering my question of 2 days ago and going to the trouble of adding the link. Sadly it is of no help, it being a much larger capacitor start motor, (mine has no capacitor) and also it has the wires all accessible externally. 220 or 110v - the procedure would be exactly the same, I imagine. Thanks again for trying, but I'm now resigned to further searching to try to find the way to get this motor reversed. Maybe I'll dismantle the motor and mess about with the field coil wires inside......
@zuluflight5467
6 жыл бұрын
Again- I learned a lot. Thank you very much for uploading Mr Fielding, and i think you believe in jesus, cause your videos are making me calm.
@Vanbulance89
3 жыл бұрын
Very helpful and clear video! Thank you. I am subscribing.
@jdwilliams5244
3 жыл бұрын
Thank you for your instruction. I know nothing about A/C motors, but I've come across a large industrial fan. Some DYI person added a one phase motor to it. Looks like an old dryer motor (like the gray one on your left). The motor runs in the wrong direction and blows air out the back. I tried reversing the fan, but it worked the same. I'll take the motor off and try your suggestions. Thanks again.
@brukernavnfettsjit
7 жыл бұрын
This makes perfect sense. Thanks. I have the diagram for my lathe motor, but I cant read it for the life of me. My head don't work that way.. But Thanks to you I can figure it all out with a multi meter. :D
@JeremyFieldingSr
7 жыл бұрын
thank you for letting me know... that is awesome
@dakwman
7 жыл бұрын
another great video. now I have to start looking for motors. Looking forward to #3 way to rock your channel you've got almost twice the subscribers as Grizzly.
@jomatzki
7 жыл бұрын
thanks! i dont know why others cant explain things as easy as you did! :) big help bro.
@JeremyFieldingSr
7 жыл бұрын
+jomatz tolentino thank you!
@JeremyFieldingSr
7 жыл бұрын
+jomatz tolentino thank you!
@armancha23
4 жыл бұрын
I am needing to do exactly what you did on the first motor. I replaced the washer motor and it was spinning counterclockwise instead of clockwise. I will try this in the morning.
@AmitSharma-pu1lz
5 жыл бұрын
Very very beautiful video thanks
@larryniidji
5 жыл бұрын
Another great video.
@hamzarashad3632
5 ай бұрын
thank you for suggesting the channel
@MrLeigh
6 жыл бұрын
First off, very good video. I've watched several and you are very good at explaining complex concepts clearly. I would like to add some input to this video. Motor direction, unfortunately, is not standard across all manufactures. NEMA, National Electrical Manufacturers Association, states that motor direction is determined from the non-shaft end, but many manufacturers state rotation from the shaft end (like you are doing in this video). In an effort to clear up any confusion, some manufacturers are now stating CCWSE meaning counter-clockwise from the shaft end or CCWLE meaning counter-clockwise from the lead (non-shaft) end. I truly only point this out to hopefully help those who may get confused by motor direction as stated by the manufacturer. Again, you do a very good job with your videos. I look forward to more in the future.
@JeremyFieldingSr
6 жыл бұрын
My source for maintaining this view support.industry.siemens.com/cs/document/60605536/defining-the-direction-of-motor-rotation?dti=0&lc=en-US. I am not aware of NEMA having a different reference
@MrLeigh
6 жыл бұрын
Jeremy, NEMA MG-1-2016 Rev 2 Para 14.6 - Direction of Rotation - ...the standard direction for dc motors and single phase ac motors is counterclockwise, when viewed from the lead end of the motor. (the lead end is defined as opposite the shaft end of a motor)
@healthcoachchris7382
7 жыл бұрын
Nice video Jeremy! Keep 'em coming :)
@dodznb238
3 жыл бұрын
Sir have nice video explaination ...salamat sir..means thank you sir
@robertcastillo2170
4 жыл бұрын
Very good video through in showing
@JWB671
7 жыл бұрын
Awesome channel keep it up!
@frankewing1769
6 жыл бұрын
Thank you so much for this for this video! I've been a subscriber for awhile and have watched all of your motor posts. Today I finally fitted an old Leland motor to a very old grinder. After being really proud of myself I turn it on and saw that it was rotating the wrong way. My first thought was to Jeremy. I re-watched this video, found how to get into the motor and then changed the polarity on the start windings. It works like a charm. Thanks again.
@JeremyFieldingSr
6 жыл бұрын
Thank you for letting me know! That is so awesome.
@cabraldegah6997
6 жыл бұрын
thank you very much, i had all my answers from your video
@JeremyFieldingSr
6 жыл бұрын
That is awesome! My job here is done
@Kntryhart
7 жыл бұрын
Good stuff! Thanks!
@parasocial_police
3 жыл бұрын
Very helpful thanks
@inspectdrone9900
10 ай бұрын
Jeremy, Love your channel and I greatly admire your work. I have a situation which I suspect a significant portion of your subscribers may find themselves in. Long story short, I bought a lathe to use in my garage. I converted the 3-phase motor to run on single phase 220 volt power using a Static Phase Controller. It works great but only in one direction. However, the 3-position drum switch no longer works. When I start it, the motor (and chuck) only rotates in one direction. The drum switch doesn't change anything. I have found online wiring diagrams on converting 3-phase motors to single phase 220 volts. I have found wiring diagrams for drum reversing switch's on single and 3-phase motors. But I have not come across the wiring diagram for my particular situation. Other details that may help you. 1. SPC: Phase-A-Matic PAM-300HD static phase converter. 2. Motor: Century brand Squirrel-Cage Induction Polyphase Motor (1.5 HP, model number SC-184-FC4-7). 3. Drum switch: 3-position, Cutler-Hammer Forward-Off-Reverse lever-operated switch. 4. Startup switch: A circuit box equipped with a green start button and a red emergency shutoff switch. 5. Magnetic Starter: GE CR306 Magnetic Starter (NEMA size 00) Let me know if this is something you would like to address. Sincerely, Bill
@dongraf9434
7 жыл бұрын
Interesting stuff..... Thanks
@FirstTry379
6 жыл бұрын
great video!!
@DDB168
7 жыл бұрын
excellent video
@jorgenavarro2782
3 жыл бұрын
Thank you God bless you.
@zetuskid
7 жыл бұрын
oh its amazing the amount of information you provide in your videos. couldyou provide information on how to change a pool pump motor to work like a regular motor. thanks zetuskid
@marktheinventor2481
3 жыл бұрын
That was a light bulb moment (!) for me: spinning that motor up by hand instead of the start winding and then changing its direction. I'm a pretty experienced workshop guy, I guess - but electrical gear always seemed a bit impenetrable and frightening. Not anymore. Thank you so much.
@anavan7
2 жыл бұрын
I know nothing electrical but was assuming switch the two cables but wanted to double check. And lo and behold that is what was needed
@sartorst3376
3 жыл бұрын
Thank you I was about to install a jack shaft to reverse a motor on a lath
@wkualum3194
5 жыл бұрын
Have watched several videos and really like what you do. I bought an older 3/4 pool pump motor for $30 and would love to make it lift my boat hoist. Think it can be done? I was hoping I could go both forward a d reverse.
@buddhalovechild
Жыл бұрын
Awesome. Thank you
@danwilliams4670
4 жыл бұрын
This is very informative. I have seen many of your videos and wish I had half your knowledge. I have a sewing machine motor and I am researching a way to change the direction of the output shaft mechanically by gearing. I don't have a place to start. Any advice or Ideas would be appreciated. I'm humbly asking as I have seen your understanding of gearing displayed in other videos. Thanks.
@jimjohnson3076
5 жыл бұрын
Have you tryed to wire a alternator off a car /truck to work as a motor? If not will you ? Thanks jim love your style of teaching thank you.
@FoxMan777
7 жыл бұрын
And here it is... :) Thank you! Love the switch-a-roo trick for the starter winding and direction of rotation. I wonder if maybe you could speak at some point on protection (Thermal and Shorting), or point me to a link of something you have already done in video or that you know of somewhere else? For example I have repaired a couple of brushed AC motors for my wife's hand held mixers, because nested down between the tape and the windings was a thermal fuse. They work again, but I don't want to give them back to her until I have some sort of fusing system external to the tape on the windings. I'd love to add a fuse port on the back to make it easy, but I don't think that would address the temperature issue of the windings, only current draw. I know someone will say they are so cheap that you might as well get a new one, and we did go out and bought here a heavier duty mixer (Black and Decker of all things! :D ) But these are her favorites, because one was from her mother, and the other also from her mother is her favorite color and goes along with other kitchen items. She went and used these weaker ones meant for frosting on mashed potatoes. ;) As for sources of motors, I see the same basic sources you just mentioned in this video. It's amazing how much people throw away, and it could so easily be fixed or adapted to some other use. I have this one shop vac that only needs new brushes, but they seem to be proprietary and unavailable. Which also leads me to a question... Who's a good company or source for brushes for electric motors? :) I might be able to find something that will work... Thanks again for your videos! Cheers!
@JeremyFieldingSr
7 жыл бұрын
I am not sure what to do about the fuse, and I can't think of a good source for what you want, as you are modifying the original design. Brushes are usually very similar in size and shape. You may have to purchase some made for a different machine and shave them to the right shape if needed. At least that is what I would do if I needed custom brushes.
@carferar
2 жыл бұрын
You good teacher brv
@vionprecisionmachiningengi3349
Жыл бұрын
Thank you very much!
@nickbecraft4356
5 жыл бұрын
where is the capacitor in the first induction motor in this video? is it built into the motor? I have a DPH224L01 I pulled out of an electric dryer, but I'm having a hard time figuring out how to reverse its direction. Does the capacitor have anything to do with changing the direction? I feel like I have tried to switch all of the leads, but its spins the same way.
@bobbailey1288
7 жыл бұрын
Wow, this is great
@willoneill7269
7 жыл бұрын
It's criminal that your channel is not bigger.
@johnmichaellane1
7 жыл бұрын
Will O'Neill Dang right. I have yet to find better information on electric motors than what's here.
@FoxMan777
7 жыл бұрын
The bigger his channel gets, the less time he will have to do videos. :D He'll be answering so many questions, he'll never get back to his shop! :D
@claymationwaves
5 жыл бұрын
No it's criminal
@aaaricmondroofing1703
5 жыл бұрын
it's criminal ,I don't get notified, been unsubscribed. it is definitely criminal. This cat is one of the best teachers on you tube ,maybe the world.
Пікірлер: 366