Dude, these are clever ideas. Sanding juice grooves is such a pain
@gusgranrath1840
2 күн бұрын
Great video , very creative and resourceful way to sand juice grooves. Tools designed for many different applications.Will definitely try this. Thx. Brother!!
@SavageVoyageur
4 ай бұрын
Great tips that will keep me in the groove, thanks.
@aam50
Жыл бұрын
These are both inspired ideas - and useful for much more than just the juice grooves. Thanks for sharing.
@Chris_laws
Жыл бұрын
Thank you, I use the multi-tool sander for sanding inside of curves or odd shapes
@alesenoni
2 күн бұрын
you're very creative. Good job
@geraldhickey7781
Жыл бұрын
Awesome ideas especially for multi tool 👍
@lightbulb68
Жыл бұрын
Greetings. I have enjoyed to see all the ideas that you came out with. I can tell that you are a very bright and full of innovations. It looks like that any field that you are going to pursue will have a great success and satisfaction. I wish you luck and continue with your great work.
@avir5604
Жыл бұрын
Amazing idea 💡 and thank you for sharing. 🙏
@landoncarter6452
6 ай бұрын
Thank you for this excellent and very helpful information.
@gregcarter661
Жыл бұрын
You're a genius!
@BeaulieuTodd
Жыл бұрын
Some good ideas. I’ve struggled with sanding them. I recently got a cnc and I’m hoping that will significantly improve my grooves.
@gaylewilliams7353
Жыл бұрын
Wow! This is so much better than how I've done it. Thanks! You've got a new subscriber.
@Chris_laws
Жыл бұрын
It’s definitely saved me a lot of time and frustration 😅
@JB-kt3gd
6 күн бұрын
Thank you!
@bwasman8409
4 ай бұрын
Good method worth trying...thanks!
@brandonjohnson7559
Жыл бұрын
Very clever, will defiantly be trying this
@GeometryBuild
Жыл бұрын
Awesome tricks! Thanks!
@KeithBurtis
Жыл бұрын
Brilliant man. Thanks for the tip!
@yourunclesam6780
Жыл бұрын
Wonderful tutorial Bro.thanks a lot
@JoseJavierCCP
Жыл бұрын
Very good idea with a multifunctional machine, my problem is the hardness of the wood, the router starts
@chrisweigand1817
Жыл бұрын
great tip on raising the grain on the juice groove then hit it again with the router at the same depth.. question about the thin strips. Are they face grain? Are all your pieces face grain to face grain? I am confused about putting face grain to edge on cutting boards. is that ok over time? I know not to ever mix end grain with face or edge but I can't get a definitive answer on face to edge glue ups. both long grain so should be ok?? anyway your boards are beautiful and definitely going to try one.
@Chris_laws
Жыл бұрын
Thank you! The cutting boards in the video are face grain. I’ve made face grain, edge grain, and end grain cutting boards. I am by no means an expert, but I think you’re right on never mixing end grain with face/edge grain, mainly because of the issue of - when it comes time to flatten the board; unless you sand it flat, you don’t want to send a piece of end grain through the planer. I don’t see a problem with mixing face and edge grain. I’m sure some of my ‘edge grain’ boards have a couple of pieces of edge/faces glued together because I’m not the best at differentiating the two, and they have held up well. Regardless of the orientation of the boards, i.e., face grain glued to edge grain or vice versa, I think the most significant factor in determining a wood cutting board’s longevity is the quality of the glue joints.
@taboa
Жыл бұрын
Que ideia top amigo! Parece até brasileiro fazendo nossas gambiarras! 😂😂😂😂
@casperscuts2627
Жыл бұрын
Great information, thanks!
@m.at.the.w.
Жыл бұрын
Harbor freight makes some little rolls of sandpaper like you made for the rotary tool you should check out
Пікірлер: 34