Please can you explain the Power Flow screen once you have clicked detail on your right hand side. Specifically how tjechouse usage is split in this screen. Thank you.
@patricksheir7708
8 күн бұрын
Please I wanna know about the charge of battery,why the grid or generator does not charge the battery
@miketurland4235
7 ай бұрын
Can this be done for one day only ie Sunday from 11am to 4pm to match BG cheep tariff day ???
@nicholaskornjaca104
9 ай бұрын
Thanks for this explanation. I am assuming that during this time (00:30 to 04:30) there is no Solar Power so no supply from the solar panels and the power to the battery is seen as house load along with any power being consumed by the house and therefore being charged from the Grid. Are these assumptions correct? What happens to the % SOC after 04:30? Does the battery then supply power to the house load in preference to the Grid and prior to the solar panels producing output? Does zero export refer to power from the battery to the Grid? And as Solar export is ticked this is the only source of power from your system? Please advise.
@rbee3936
8 ай бұрын
So why can't you choose 4:59 instead??? I'm baffled by this incompetence too...
@PipThorne
Жыл бұрын
From experience I have found that the power options in the timers relate to the discharge power only, not the charge power as inferred in this video clip. The battery charge power is set by the values in the battery settings. Specifically the charge current.
@neilbarlow24
Жыл бұрын
Would be great to have that clarified : that was my understanding too : i have mine set to the battery discharge/charge for the battery (CATL 5.12KWH which is 2560 I believe) and not the max of the inverter....
@neilbarlow24
Жыл бұрын
would welcome a reply from Sunsynk on our quesiton.
@scriptedpixelsltd
7 ай бұрын
How do I access this view from my desktop/laptop?
@rbee3936
8 ай бұрын
Another problem, which seems common sense to me, is why can't you set a start charge time, a finish charge time, a battery state-of-charge percentage and let the system fill in the charge current rate so that final level is always achieved. I currently have to work out this charge rate myself using a pen and paper - surely a computer should be able to do this basic maths the same as I can?
@rbee3936
8 ай бұрын
A few major problems here... on the inverter itself I managed to set timer2 to 04:55am (5 minute increments) but on the Android App your only choices are every 30mins - ie 4:55 is impossible to achieve. Very poor indeed. (Ideally I would have chosen 2:01am to 4:59am since Octopus Energy have cheaper electricity between 2 and 5 am, but the present oversights and limitations make this impossible)
Пікірлер: 11