I got this same thing done at J&I STHIL shop for about $84.00, And after seeing your video and seeing how easy and not a lot of time it takes to sharpen it yourself, I don't think I will ever be taking it back there again I rather do it myself now .
@CalvinThomas05
4 жыл бұрын
Hi Paul Handley. Thanks for the comments. Yes with a bit of practice this method of sharpening you're blades is very accurate and fast. Cheers, Calvin
@paulswarman
6 жыл бұрын
Thanks for the tip Calvin, really useful as I was having trouble with my Flymo hedge cutter. In the end I used my Dremel with a small grinding stone, I did take your advice about not taking too much metal off and it certainly saved LOTS of time over using a file. I found I could very quickly with hardly a need to check, move from one edge to the next and get a really sharp edge. Getting the grinding angle right proved to be quite straight-forward as you could easily see from the dull unsharpened metal to the clean, newly sharpened edge if you were grinding correctly. Many thanks.
@CalvinThomas05
6 жыл бұрын
Hi Paul. Thanks for the comments. I'm glad this video helped you out. All the best Calvin
@jeremyminns5627
4 жыл бұрын
Flexible grinding discs👍
@matsandresson4758
6 жыл бұрын
Thank you for an informative video.All the best.
@CalvinThomas05
6 жыл бұрын
Hi Mats. Thanks I'm glad this video helps you. Cheers Calvin
@surreyarborist
5 жыл бұрын
Used your amazon link to get the roloks arrived at my front door within 11hr 55mins !
@CalvinThomas05
5 жыл бұрын
Hi surreyarborist. Thanks for buying through my link. Yes that's quite fast delivery. I'd say. Cheers Calvin
@LemonySnicket-EUC
3 жыл бұрын
I use a small Milwaukee M12 battery powered version. Works great.
@donniecatalano
3 жыл бұрын
0:03 Your shop is pretty wobbly!
@bazengu1
6 жыл бұрын
Thank you mate lesson well done
@CalvinThomas05
6 жыл бұрын
Hi baz. Thanks for the comment. I'm glad this video helped you out. Cheers calvin
@gerrywalsh7677
5 жыл бұрын
Very good thanks.
@zarrow50
6 жыл бұрын
So what equipment are you using?
@CalvinThomas05
6 жыл бұрын
Hi Clive. Do you mean the hedge trimmer Its husqvarna . to sharpen the blade I'm using a little air sander. Fitted with a 50mm roloc sanding disc. Like an angle die grinder. I hope this helps. Cheers Calvin
@zarrow50
6 жыл бұрын
Thanks, I am having a problem moving the blades so I can get to both sides easily.
@zarrow50
6 жыл бұрын
What compressor does it need?
@wwh2694
6 жыл бұрын
What grit are u using?
@laurenfreeland2604
5 жыл бұрын
@@wwh2694 in one of his other videos he said 60-80 grit
@unknownpresident
4 жыл бұрын
You don't like useing griders , but u use a grinder ... 🤔 File and a Stone makes a cleaner sharper non Jagged eadge 🔪
@CalvinThomas05
4 жыл бұрын
I'm using a mini sander. Very fine grit. Not a grinder
@petercleary1000
3 жыл бұрын
20 r 30 pounds on ebay. Yes but a compressor is £ 500.🤔
@sulemanyusufadam4315
3 жыл бұрын
You can get compressors for under £100. No ones telling you to buy a £500 precessional level compressor.
@LemonySnicket-EUC
3 жыл бұрын
The Milwaukee battery powered version works quiet well.
Пікірлер: 25