Great video. Years ago I used to run a wire coat hanger through the heating element tube. What manufacturers do now is put a metal screen inside so you can't do that. I take a drill bit and drill out that screen careful not to drill through the side. Then you can run a hanger wire all the way through. The coffee manufacturers do this on purpose so you have to buy a new maker. Everything is a scam these days. Sometimes I get around it sometimes I don't :)
@salauerman7082
4 жыл бұрын
Bob Czz yep: land fills keep growing because of deceit that leads to unnecessary waste!
@TheJmax59
3 жыл бұрын
I knew that after 5 seconds you identified the problem with my snazzy red & black Mr. Coffee that my dearest son bought for his Mom as a Christmas present. So here's another project for me that goes on the list. I'll just use my percolator on the stove again. You're terrific and I've subscribed to your page. Thank you!!
@BudNoodles
Жыл бұрын
I was so frustrated with Mr. Coffee and the three beeps, and this video saved the day! I am back to my non-grouchy caffeinated self. THANK YOU!!! :D
@CommodoreMuggleYC
6 жыл бұрын
Fantastic! Inspired me. Gave me confidence to tackle on my own! Love the "security screw" issue and your total disdain for the manufactured obsolescence. Did almost same procedure on a similar Mr. Coffee model. Immediate results! Folks those little rubber feet will pop out and pop back in...don't be too gentle. Keep track of which hose you take off. My model has a red rubber tube with a back-flow valve in it, I believe. Don't mix it with the other. Otherwise, have at it. What is the worst that can happen? You trash it, concede and spend the bucks for a new model. So, not high risk. BUT high reward to fix it yourself. I feel like Magnum PI now. Thanks! Love the can-do, all-American, fix-it ethos.
@TheOriginalMechanic
6 жыл бұрын
You're welcome. And thanks for sharing the fun and funny commentary. I really enjoyed it!
@RG615
2 жыл бұрын
You mean you feel like " MacGiver"....you did a MacGiver fix. 😉✌️
@CarlosOrtiz-gb3tn
4 жыл бұрын
The american spirit! always fixing things like in the old good days!.. Good job!
@anthonymarino4260
4 жыл бұрын
same as you
@corolla3947
3 жыл бұрын
Ueaaa
@mounasweiss8986
9 жыл бұрын
I admire the idea that you fix something before you throw it. At least this is the way we where brought up at our house, my brothers were fixing stuff all the times and there was no need to call a handyman. I was having the same problem with my machine, did the vinegar solution and automatic cleaning. So far it works, but still makes that bubbly noise. I might fix it your way. Thank you for your help :)
@TheOriginalMechanic
9 жыл бұрын
Mouna Sweiss Thanks for the comment. I got the fix it habit from my dad. He would recover and re-purpose things that even I wouldn't bother with!
@JosephMendoza-wu2vu
Жыл бұрын
This Keurig was a gift to a lady that has never in her life operated one
@hastingb
5 жыл бұрын
First of all thanks for posting this video. I had the same problem with my Mr Coffee. I tried running some CLR through it but it still was brewing really slow. So after watching your video I decided to crack it open and sure enough it was exactly the same inside as your coffee pot. I pulled the hoses and checked the heating element but everything looked spotless. The problem I had was with the ball valve inside the inlet tube. If you shake it, you should be able to here the little ball inside. I was able to extract it and give it a good cleaning and insert it back into the hose. Works great now!
@peggywillingham7469
5 ай бұрын
Thank you!!! You saved me from having to buy a new coffee maker!!!! Your video made it so easy even though my coffee maker was different than yours I just followed your instructions and now I'm so proud of myself that I could fix something instead of throwing it away. God bless you 🤗
@TheOriginalMechanic
5 ай бұрын
Good job! Thanks for watching and I really appreciate the comment.
@woodswalker88
7 ай бұрын
I must have had to replace my Mr Coffees 10x! Now I got my French Press & decided to ditch Coffee Makers altogether. But first i"m gonna take it apart & see if I can fix it. Why? to get experience Fixing Stuff. It's a great Life skill. Thanks for your video, it's the best on the subject.
@maithevnesegirl6404
5 жыл бұрын
Thanks for the info. I cleared the ball valve and it works now. Save me $50.
@HemiVic
4 жыл бұрын
Did you run a carafe of white vinegar after you assembled it? Then three carafes of cold water to make sure it’s clean? I’m sure you did!
@LetitiaOwens
3 жыл бұрын
Thank you I am gonna try this.. I love your statement "Why do this?" for me after three of these with the same issues I decided to get some HELP from my Friends at KZitem THANK YOU, I hope it works for me too. :)
@collinmorgan9737
Жыл бұрын
UNREAL THERE IS A SCREW TO KEEP US “THE WONDERFUL CONSUMER” FROM BEING ABLE TO BREAK IN AND CLEAN OUR MR. FAITHFUL ESPRESSO MACHINE. #AWFUL YOU GET WHAT YOU PAY FOR…I’LL NEVER SPEND ANOTHER FLIPPIN’ DIME ON THEIR PRODUCTS.
@Webcoreinteractive
Жыл бұрын
Thanks for the video. Mine is doing the same thing. I'm going to buy another as a backup, but def fixing my current one.
@lorichandler266
Жыл бұрын
My coffee was not coming out at all so I tried the easiest thing first and banged the empty potless coffeemaker twice on the counter and now it works. Must have been the check valve. Thanks for the hint. I don’t have a hard water problem because I use filtered water so I thought the check valve was probably stuck.
@alicebackhaut7859
Жыл бұрын
Thank you !!!!!!!!!!!! Totally awesome, I'm so glad that I found your video!
@shesangs434
2 жыл бұрын
Watching this video in 2022. Thanks for helping me!❤
@ericfritsch7613
2 жыл бұрын
Agree everything designed to fail so you toss it and buy another. Built to last will over come this disposal garbage sooner than later!!!
@grapefruitm00n
2 жыл бұрын
Cool vid. Watched. Couldn’t get the odd shaped screw off. New one will be here by tomorrow
@dennyb3896
9 жыл бұрын
Thanks, I'm the same kinda guy when it comes to stuff like this. Some people don't understand.. ;) Ours quit flowing this A.M. I should have it fixed shortly. Take Care
@pedrorivera7597
10 жыл бұрын
You can use a pressurized Air duster used to dust off computers to flash the heating element also.
@terrytate6006
9 ай бұрын
Mine was clogged up at the heating element I drilled it out with a 316 drill bit
@paulahowell1420
2 жыл бұрын
Awesome, I know just what you mean . That's what I seem to be good at also 😃. My coffee maker is a mr coffee mini (3 cup) and after having it 2 yrs roughly and cleaning it may 3 or 4 times; it is just not working right. I may just have a look under the good. Thanks and God bless you original mechanic. P.s you must be a corporations nightmare.... awesome 😎👍🏼💗
@maddogguzman3961
3 жыл бұрын
I cant get those dam security screws off, wth help!!!!!
@Nektopoulo
2 жыл бұрын
You even slightly resemble TV's , nice work,
@ohio342
2 жыл бұрын
Thanks, Yeah, I like to fix something when I can too.
@jayneweaver8695
6 ай бұрын
GREAT video, thank you!!!
@johnrobinson7036
4 жыл бұрын
Many thanks. 45 minutes. Found a clog. Made a full pot that took 15 minutes to brew. Great job.
@handiman5
8 жыл бұрын
Cool video! Thanks for your understandable explanations, and especially for sharing your reason 'Why' you do the repairs! Right on!
@TheOriginalMechanic
8 жыл бұрын
Thanks for the comment. Always good to hear from a like-minded viewer!
@Hammerthumb1
9 жыл бұрын
Thank you for posting that video. Coffee pot came apart just like in video, and I think my problem was coffee grounds in the check valve. Design flaw in pot allows coffee grounds to overflow back into water supply tank if basket or pot is misplaced(as happened to this pot). There is no filter to keep them out of water intake line. Red hoses are made of soft rubber and easy to remove. Check valve is inserted into cold water supply line, and can be removed by applying compressed air to heater end of hose. Cup your hand over end of hose so you don't loose valve when it shoots out. Toss out those "tamper proof" screws and replace them with phillips. Corporations have flooded our marketplace with shoddy imported crap, and have no regard for the American worker or consumer! Better to fix it than give them more of your hard earned money.
@TheOriginalMechanic
9 жыл бұрын
+Hammerthumb1 You're welcome and I thank you for posting the detailed and helpful comment. I replaced the coffee maker in this video when the heating element opened up (a fatal problem). I found an eighties, US made machine at a garage sale and have been using it ever since. If it ever fails I'll fix, it but I doubt if it will.
@vegetablepolice1
3 жыл бұрын
Because we can and because thay dont make then how they used to
@LJSask
2 жыл бұрын
You could have cleaned those valves out without taking apart- you just run 4 cups of straight vinegar and shut off machine after 3 cups of the vinegar gets flushed through- leave last cup inside machine and let set for a day or two - than rub last cup through - then run a full pot of clean water through machine to flush out particles - works like a charm
@TheOriginalMechanic
2 жыл бұрын
Great tips. Thanks for sharing!
@harveyt7
5 жыл бұрын
Also, for those who are on a budget and don't have the money to purchase a new coffee maker as well. Granted they are not expensive but the digital ones aren't cheap as well.
@Majestiicc12
3 жыл бұрын
An old video I know, but the message is paramount, the last part about the Why. Seems as though people don't understand that part much these days, far easier to go to Walmart and get a 'cheap replacement'. Rather, in my opinion, they know full well why one should be repairing their own devices, it is just easier to go get a new one. They are comfortable. In any case, thank you, this is great, I appreciate it.
@user-iy8vq7xr2n
8 жыл бұрын
Where can you buy a replacement hose? Mine is stuck to the heating element intake and when I tried to remove it it started to rip. Kind of glued on from the heat. They don't make those hoses long enough to cut a piece off.
@sarahgiannino8088
Жыл бұрын
Did this on my own super proud and i used a bra wire to get it to unclog the heating element 😂
@TheOriginalMechanic
Жыл бұрын
There's a creative solution for clearing a clog!
@TerryMcGearyScotland
7 жыл бұрын
Well done you! I admire your attitude. Too many things are just thrown away for very little reason and that is an environmental crime in my view, even if some of the item is recyclable. If something is 'broken' I will almost always have a try. There is nothing to lose and it is interesting at least seeing how something works!
@TheOriginalMechanic
7 жыл бұрын
Thanks for watching and I appreciate the comment!
@Siobhan146
2 жыл бұрын
Thank you so much! I can't believe I was able to fix it! I would never know how without your help
@sjr7822
3 жыл бұрын
I filter all my water, but, yet, 8 months later the coffee maker takes 40 minutes to make a 12 pot of coffee, thanks for the insight
@RG615
2 жыл бұрын
Awesome dude...have same issue and "had ordered new coffee maker" from Amazon. I just canceled order.. thank you. 👌
@hugoc.8534
4 жыл бұрын
I was gonna unclug mine but since Mr Coffee decided they'd use those star screws with the bit in the middle for a special screw driver, I can't.. lame.
@mostrogolf22
2 жыл бұрын
All your comments are very valid. Thank you for doing what you do. Tinkerman with a moral conscience, outstanding. Now to fix mine.
@chizziron
9 жыл бұрын
Had the same problem - took 45 minutes to make six cups of coffee! Did the vinegar but to no avail! I watched the video and it was exactly the same thing. I had to drill through the blockage (I made sure not to drill through the metal tube) and soak it with vinegar for a few minutes. Put it back together after washing out the vinegar and now it works! Thanks for the video - nicely done!
@hippygunner
5 жыл бұрын
Great video. Solved my ignorance. Once I got the hoses off I then realized the ball valve was plugged. Then I put it back on the wrong side. Never do that.lol Thanks
@upload6426
6 жыл бұрын
This method also works to get larger debris out of the intake tubing. Somehow I got a bit of paper towel into the reservoir, and it got sucked through the intake and was preventing most of the water from entering the heating element. It was sitting right in front of the little plastic one-way valve inside one of the rubber tubes. Works like a charm now once I got that cleaned out.
@johnnymidnight2982
3 жыл бұрын
What I'm gonna have to do to fix this piece of shit is take it apart screw by screw and until it is completely disassembled. Now, I'm gonna need several specialized tools just to open the back hatch, and those are gonna run you about 500 a pop. OR, I could just throw this fucker in the garbage and buy another maker for 40 bucks.
@marciagalhardo7576
6 жыл бұрын
Your video saved me 40 bucks today, thank you.
@TheOriginalMechanic
6 жыл бұрын
You're welcome. Nice work!
@6955beniegn
5 жыл бұрын
try goodwill for cheaper
@duaneevans9639
2 жыл бұрын
Great video. I have the same problem and now know how to tackle it. Thanks.
@akflyer129
2 жыл бұрын
wish I would have watched this yesterday, when I threw away my Mr Coffee and bought a new one. My old machine quit after 19 months. Back then it was 32 bucks, in Alaska, now in July of 2022 they cost 40 bucks and change. I'm gonna fix my old one now and take the new one back to Wal Mart> Thanks for the great video
@TheOriginalMechanic
2 жыл бұрын
Good luck getting it going again! You might want to try letting it soak in the vinegar solution for a day or two before taking it apart. Other viewers have had success trying that first.
@BreadNButterArt
9 жыл бұрын
Okay, I'm going to try to fix mine.
@anthonymarino4260
4 жыл бұрын
piece of cake. you can only learn. no down. side
@ymaylove
7 жыл бұрын
Awesome video! I have been using Reverse Osmosis water for Mr. coffee for 23 years before it broken No calcium clogs precipitated in heating tube,that is amazing
@methadonefreeiamNiki
2 жыл бұрын
I bought a cheap backup but it does the same thing gurgles and collects in the basket doesn't even drip none of them work. So I bought a French press.
@johnkrueger944
Жыл бұрын
I have found it infantry simpler to just "brew" 2-3 full pots of straight vinegar.
@RRODKKEN
6 жыл бұрын
Your detail instructions help me save about $30.00 to $50.00 bucks. I will be giving you a toast tomorrow morning. Thanks.
@lalala7806
5 жыл бұрын
...I'll just buy $15 coffee maker.
@delphi5966
4 жыл бұрын
Thanks for this guide. I followed it and got my coffee maker going again and brewing faster than it had been in a long time.
@myverynow
5 жыл бұрын
exceptional movie, thanks! added thumbs up and subscribed!
@montsergirl
2 жыл бұрын
Thank you so much!!! This helped me a ton! 😊😊😊
@killerhawks
Жыл бұрын
Years later still providing help.. thanks
@Khelah10
5 жыл бұрын
Thanks for the video! Did the same with mine.
@xadpx
9 жыл бұрын
I am really confused by how you removed the security screws, could you please go into more detail?
@aaahandy
9 жыл бұрын
There is a little nipple looking thing in the middle of the head to prevent the torx tool from fitting in. Now you can find the proper tool to remove them. But he is using a small screw driver that will fit in between the above mention nipple and the side of the head of screw just well enough to remove. Once removed just replace with a screw with a regular head.
@YousefGhalib
5 жыл бұрын
Thanks for the video. It helped me fix my sister’s coffeemaker.
@lilygarcia5668
4 жыл бұрын
Horrible model,I will never purchase this model again.
@alexhunterjr.6344
3 жыл бұрын
Good Video, on mine had to replace a hose. does the check value come out if you have to replace the hose on the other side?
@fbn89
2 жыл бұрын
Ok Genr coulsen lol you sound like him. Coulsen fromagent of shield lol
@salauerman7082
4 жыл бұрын
One basic, learned from the days when you banged on the tube tv to fix the picture... I almost tried unscrewing and checking the tubes, but decided to turn the coffee maker upside down and smacked it - figuring the (bearing ball?) inside the valve might be stuck: that got the light to shut off and the coffee maker was quiet as it had been while percolating! I appreciate the mechanical explanation of the construction of the machine- thanks!
@lorichandler266
Жыл бұрын
Thanks for your hint. It worked for me!
@salauerman7082
Жыл бұрын
…and what’s funny is getting a reply the same day I had to use the technique again, after my white vinegar descale process failed to make the light go out on both my coffee makers (the other is a Keurig). On the other, I also unplugged for a moment, then it was happy again.
@BigEightiesNewWave
4 жыл бұрын
FAIL Only use filtered water , will never have this happen.
@MrBrian7309
7 жыл бұрын
Thank you for making this great how-to video Dave. I have the exact same coffee maker and it too is clogged. I'm glad you did not go off too much on the "why do I fix it" summary. It was starting to sound a bit strange.
@TheOriginalMechanic
7 жыл бұрын
You're welcome. Thanks for watching and commenting.
@TheCompanyVideoLog
5 жыл бұрын
Thanks for the video and the time you took to make and upload it. My wife's coffee maker just started doing this and thanks to this video, I know what to do. Hopefully it all works out.
@TheOriginalMechanic
5 жыл бұрын
You're welcome. One thing I learned since making this video is that putting the machine in the cleaning cycle and then shutting it down and letting it sit for a few days can also work.
@giniberg4816
10 жыл бұрын
I've saved some other coffee makers, but this video helped me actually get to my slow Mr. Coffee. Any particular amount of vinegar has a limited capacity to dissolve the calcium (usually) clogging the tubes. So renewing the vinegar every few hours makes sense. An easy way to put the vinegar into the tube is using a couple of feet of plastic tubing (available in a hardware store). Just suck up some vinegar and put it in the cold end of the heating tube (held to make a U), until it comes out the the hot end. I found drill bits to be useful in clearing a lot of the calcium from the hot end. Not in a drill...just in the fingers.There are probably better chemicals than vinegar, but we have vinegar at home, when the urge to take the coffee maker apart strikes.
@TheOriginalMechanic
10 жыл бұрын
Those are some good tips. Thanks for watching the video and commenting.
@ShowemRight
5 жыл бұрын
Great job, get you some Pipe Cleaners too, if it should happen again..
@TheOriginalMechanic
5 жыл бұрын
Good tip. Thanks for watching and sharing.
@sharonwilen2075
2 жыл бұрын
On the k-cup it steaming the water won't come out
@edgardavila5466
6 жыл бұрын
I had the same problem, I used steel cable 1/8 by 8 "and use it in the drill as a flexible drill bit and in a few seconds unclog the pipe !
@TheOriginalMechanic
6 жыл бұрын
Cool solution. Thanks for watching and sharing!
@michaelcampise5617
2 жыл бұрын
Throw it in the garbage and buy a perculator
@berad187
4 жыл бұрын
Wouldn't CLR work on that? The same way basically that some multi surface calcium build up that would clear that out
@TheOriginalMechanic
4 жыл бұрын
Sure
@mannshambles7006
2 жыл бұрын
It is best if you NEVER use tap water to brew coffee. Yes, I go through the hassle and expense of buying purified water. Better tasting coffee, longer coffee maker life. Great video. I will definitely try this should the same problem arise for me.
@Gigi-sf6nf
6 жыл бұрын
My Mr. Coffee brand machine is only 8 months old and it's making the same loud noises. I've been using purified water to make coffee since the day I bought it. I had a Mr. Coffee machine worked great for 10 years with no problem. I decided to buy a new one because the other one looks old. The old one just has 1 function of making coffee. Now they added a bunch of unnecessary features and screwed up the coffee machine! The main purpose of this machine is to MAKE COFFEE!! Stop messing up the coffee machine MR.COFFEE!!!
@veronicastewart1112
Жыл бұрын
My issue is, that the basket that holds the filter doesn't drain into the pot. It just sits there and drains a drop at a time.
@TheOriginalMechanic
Жыл бұрын
These baskets usually have a spring loaded release valve that opens when the carafe engages it. This part may be plugged or broken or the carafe is the wrong one for it.
@artmakersworlds
6 жыл бұрын
outstanding. I forgot that it takes vinegar days to dissolve that crud. Just running it through eventually stops working. But yea, duh. I have a room hot mist humidifier that gets cleaned the same way. Let the element sit for a few DAYS and it cleans just like new. So... one Mr Coffee will NOT go in the dumpster this time around. Thanks.
@craigconway4093
2 жыл бұрын
Thanks for this :) "Repair" is the fourth R... Reduce, reuse, recycle, and repair.
@stuzman52
10 жыл бұрын
Good job David and demonstration of how the coffee maker works!
@TheOriginalMechanic
10 жыл бұрын
Thanks for watching the video and taking the time to comment.
@peggyhall5363
5 жыл бұрын
A pipe cleaner, now found in craft department; those fuzzy flexible wires might help before accumulated so heavy.
@juliesmith9491
5 жыл бұрын
I have this model, it's 5 months old. It does nothing. Turns on, no brewing. It worked fine yesterday.
@mathesar
10 жыл бұрын
Thanks for the video I was able to fix a slow brewing Mr Coffee BVMC-SJX33GT, the internals look identical to the one in this video except the hoses were clear / transparent and it uses standard phillips screws.
@TheOriginalMechanic
10 жыл бұрын
It's good to hear that the video helped. Thanks for watching and commenting.
@josepenate7367
3 жыл бұрын
Thanks,good man😁😁,
@RedMandMs
4 жыл бұрын
When you pulled out those pliers I said, "Somebody in that house makes jewelry!" Lol! I do.
@mickbrown815
2 жыл бұрын
My model is the cuisinart cbc-00 coffee maker….same thing with mine. How does that back flow go back inside the hose? -> #* or
@TheOriginalMechanic
2 жыл бұрын
I ran water through it when it was out to confirm direction for reassembly and just seated the hoses over it.
@mickbrown815
2 жыл бұрын
@@TheOriginalMechanic yes sir I figured out this am. I had installed it backwards but easy fix. Now I’m soaking the system in vinegar and will do it for 3 days as well. Mine is so caked on but made some progress today.
@mickbrown815
2 жыл бұрын
@@TheOriginalMechanic mine is still clogged up after 3 days of soaking I guess I will put more vinegar in it. On one side it’s like halfway very cleared but the other side only can get like 1/4 of the wire in.
@stephenhill3286
2 жыл бұрын
Gotta love you tube
@terrorninja
6 жыл бұрын
You should do a step-by-step video on how to take that exact copy pop apart piece by piece starting with the top
@CG-db6ll
2 жыл бұрын
Thank you for explaining in detail!
@jantrapnell01able
9 жыл бұрын
excellent. thank you!
@TheOriginalMechanic
9 жыл бұрын
Jan Trapnell You're welcome. Thanks for watching and commenting!
@eileenfuentes6975
9 жыл бұрын
Haha at 4:45 it looked like you were doing a root canal :) Mine is doing the SAME thing. I'm NOT a morning person AND I LOVE my coffee. Waiting 37 minutes for my coffee to brew is 37 minutes of hell! LOL Thanks for sharing. I'm about to perform coffee pot surgery. I'm going to use an extra baby bottle nipple brush, those things are great to hold onto for things like this.
@TheOriginalMechanic
9 жыл бұрын
Thanks for watching and commenting. Good luck with the nipple brush. I would have tried that if I had one!
@kooldesign4u
5 жыл бұрын
Pipe cleaner might have worked.
@hungton2223
4 жыл бұрын
Which side tubing has a fault valve?
@TheOriginalMechanic
4 жыл бұрын
There is a check valve on the side toward the water supply
@drdexter33
8 жыл бұрын
Hi there. I have a similar product where it was blowing steam. I pulled the thing apart however I lost the little ball in the check valve that goes in the cold water hose. Do I need this or can I purchase a replacement valve somewhere? thanks.
@TheOriginalMechanic
8 жыл бұрын
+Doug Dexter Yeah, you are going to have need a working check valve. Without it you will get back flow of heated water and it just won't work at all.
@paulhutson6451
9 жыл бұрын
Great video. I found the tubes clear. I removed the cold water hose and squeezed out the check valve you mentioned. I found that there was a piece of coffee ground stuck in the seat for the ball that prevented the check ball from seating correctly and preventing back flow. Seems to be the fix.
@TheOriginalMechanic
9 жыл бұрын
Paul Hutson Hey, that's a nice find. It was a good idea to check the check valve! Thanks for watching and commenting.
@TalonHauser-i4g
18 күн бұрын
Do you still have that coffee maker
@TheOriginalMechanic
15 күн бұрын
No, do not. It had to be thrown out for an electrical failure.
@TalonHauser-i4g
15 күн бұрын
@@TheOriginalMechanic Could you make a video of your newer version
@TheOriginalMechanic
14 күн бұрын
@@TalonHauser-i4g No sorry, our household went Kuerig. I do have a Kuerig video though lol.
@jrahman11
Жыл бұрын
why is this a 11 min video😊
@TheOriginalMechanic
Жыл бұрын
Good question. This is very early work on my You Tube channel. I 'm a bit more self aware of the viewer's time now., while at the same time trying to provide details they may need to complete a job.
@waynewallace9055
7 жыл бұрын
I didn't tear mine apart just pour 6 to 8 cups of distilled white vinegar and run clean, u can let set a day or two or heat the vinegar then place in coffee maker, works great
@TheOriginalMechanic
7 жыл бұрын
Good tip! I've been doing that same thing lately.
@gobigpoker
9 жыл бұрын
One of my tubes had some sort of valve in it with a ball. The ball must have been stuck. I loosened it up and it works now!
@aaahandy
9 жыл бұрын
Yes he did say about something about the check valve. You need to be careful not to lose those parts and put them back in the right position.
@222mtb
7 жыл бұрын
Yes, this! Brewing starts at 4:49 am and finishes at 5:11 am. Tearing it down tonight, thanks for the inspiration.
Пікірлер: 210