**EDIT** Once you plug in your Crane into your computer, you can turn it on. This is how the software will detect the Crane.
@lucaercolani6797
6 жыл бұрын
Thanks for the video, man. I followed all the instructions, but at the end on the display I get an " X ". I tried different times, but nothing. Firmware version: 1.70. Can you help me, please? Thanks a lot!
@willem1777
6 жыл бұрын
Same!
@Seimstudios
6 жыл бұрын
Bricked. All I get now is an X symbol after the update. The crane will no longer power on.
@ReubenMRU
6 жыл бұрын
Me too with the crane plus...
@ReubenMRU
6 жыл бұрын
Did you manage to fix it?
@herbherbert
5 жыл бұрын
Yes, a very complicated firmware upgrade procedure. Being an old geezer I would never have been able to complete it without the help of this very clear and well made tutorial. Thank you.
@3fs557
6 жыл бұрын
For all who have issues with the firmware upgrade specially on mac Sierra: you can't open the calibration tool on mac! the usb driver (i tried all of them!) did not recognize the crane 2. so i did the whole process on a windows laptop and it worked fine😀 I upgraded from 1.66 to 1.73 and Pov mode is working!!
@ThomasPrettyman01
6 жыл бұрын
Man, any time I google Zhiyun Crane 2 + whatever my problem or question is, your channel comes up. Thank God for that. Thanks for the awesome content.
@MomentumProductions1992
6 жыл бұрын
Yay! Thomas! I am so happy that these videos are helping you out! :)
@leoheinl
Жыл бұрын
Just bought a Crane 2 and your videos have been so helpful, just got the latest firmware now, you made it easy, thank you 😀
@johnhunter9065
6 жыл бұрын
Haha why was searching for a KZitem video needed just to update the Firmware..? thank you man.
@magnetixxx
3 жыл бұрын
Crane 2s in 2021. Device wouldn't activate or upgrade with the app. This fixed it, and now im up and running. thanks for the assist!
@craigbrockway652
2 жыл бұрын
Thank you for this excellent video! It is still current and valid four years later. Zhiyun would do themselves and all of us a huge service by using this as their "Official Tutorial". I did swap out the flat cable with a quality USB-C cable due to the "serial port has been closed!" notices and finally was able to upgrade a Crane 3s to V1.87
@CobaltRift
Жыл бұрын
Thanks, this process also worked for the Crane M3 gimbal. I was missing clicking on the upper "Open" button in the app.
@RightArmProductions
6 жыл бұрын
Thanks, this was so much more concise than the official Zhiyun video on the subject.
@BADHILUX
6 жыл бұрын
HI I need help! you seem really good at this and I've watched all your videos on how to balance and update the gimbal. Do you know why my crane m won't detect my Sony a6000. I've tried everything and im 4 hours in with no luck. it works sometimes and then just stops working. Im on my second gimbal since I returned the last one cause I thought it was defective!
@FOKKINODV
6 жыл бұрын
already has firmware 1.713 it is very good, with it running the control panel and the flow of focus. do not regret your stabilizer.
@MohnishD
6 жыл бұрын
Upgraded! Glad to know that starting in inverted mode works now!
@EveryDayHoliDay
6 жыл бұрын
soooo useful!! You guys simply rock!!!!
@AnthonyBordignon
6 жыл бұрын
this was awesome. Couldn't have made it anymore clear and simple. Thank you very much. Ive subbed and your advice and tutorials has really helped me grow as a youtuber
@DreaDom
4 жыл бұрын
Thanks very helpful! It wouldn't let me upgrade though. I'm assuming because it already was upgraded to the current firmware? I literally just bought the crane m2, current version says V2.02.
@formattester6
5 жыл бұрын
ANSWER TO A COMMON PROBLEM: myself and endless others on various upgrade firmware videos like this have had a problem with the tab named... "OPEN".... being ..."greyed out" thus not allowing to click "UPGRADE" at the bottom because it was "GREYED" out as well. i tried 3 different USB cables and had NO SUCCESS getting the "OPEN" click tab to become active. i tried another USB cable (4th) and "IT WORKED". its fair to say that this was a "CABLE ISSUE". all of the USB cables i tried work just fine for the battery charger yet the gimbal itself is far more particular. hope this helps some people here with this issue.
@katyb798
5 жыл бұрын
This solved my issue as well, thank you for this comment!
@Maturnentertainment
4 жыл бұрын
I'll try that
@akmalhaziq2305
5 жыл бұрын
does this works on crane v2 as well bcs i couldnt see any v2 firmware on the download page
@CallMeJ.
3 жыл бұрын
At 2:30, that "open" button is also greyed out. I can't click on that "open" button or the "Upgrade button."
@dovtographie8312
6 жыл бұрын
finally a video with clear instructions. This worked perfectly. thank you!
@MomentumProductions1992
6 жыл бұрын
Thank you for your support :)
@jcsheng505
6 жыл бұрын
Thanks for the video. It was time to upgrade and I remember watching this video when I first got my Crane 2.
@MomentumProductions1992
6 жыл бұрын
Thank you for watching :)
@divingandbaiting6408
5 жыл бұрын
I appreciate this video bud, for the life of me I could not figure this out
@1183tn
4 жыл бұрын
Zhiyun is crap, they can't seem to get software correctly in any shape or form. Most applications out there would notice that something was plugged in or even identify. They got it all backward when you have to go: 1. Their website, 2. Select what you think you got, 3. Manually download 3-4 application to get started.... This is probably the last time I buy their product.
@Almanzajj
Жыл бұрын
thanks! pan is working well now!
@theampedlife
5 жыл бұрын
Thanks Josh, where would I be without your channel??
@mauriciosantamaria5162
Ай бұрын
Thank you so much for this video!!! It save me a lot of time
@ToysBeingAwesome
6 жыл бұрын
Winner! Thanks man. And for the POV email. I had NO idea. Coulda used it a ton last week here in Sydney.
@CollinAbroadcast
6 жыл бұрын
This was very helpful. Thank you!
@MR-or3bg
3 жыл бұрын
You can also confirm the version by going to the camera settings > general > software version in the app after you restart/flash the firmware
@FrontRowFilmsco
5 жыл бұрын
worked for me! Just follow the link in the description instead of typing it in.
@ruslancoi56
2 ай бұрын
Я решил проблему) только на М3 , скатился на версию 1.72 - потом отключил стабилизатор , далее зажал кнопку М и начал прошивать на 1.77 - вуаля сработало!
@joshrosales
6 жыл бұрын
Josh Thank you so much...you are the best! excellent instructions very easy to follow....done my Zhiyun crane 2 new firmware..
@GKVideography
6 жыл бұрын
Awesome, thanks! The instructions on this aren't very clear to say the least so glad I found your video. Have a SUB!
@MomentumProductions1992
6 жыл бұрын
Thank you so much for subscribing to my channel Gavin Kerr! I hope that my content will greatly help your career in filmmaking. If you have any questions, please feel free to comment on any videos or send me a personal message! I will talk with you soon!
@paolodetailing
6 жыл бұрын
I have used the zyum carne with Sony A9 and 28 135 Sony cinema lens! Perfect
@lainol
6 жыл бұрын
how? I can't with a7s + 28-135
@rken100
6 жыл бұрын
man your videos are great im getting all my info about the crane here thanks bro!!
@CreatingASimplerLifeOffGrid
4 жыл бұрын
Is there anywhere I can get my crane v1 serviced in the USA? I cant seem to find any help with this thing .Help please...
@CaliKim29
6 жыл бұрын
On the Mac calibration/upgrade interface, with the Zhiyun, plugged in and on, you may need to click on the Open/Close button for the software to communicate with the crane. Great vid, hope this helps!
@jon_almas
6 жыл бұрын
Greatest resource for Crane users there is! Question for you: what motor setting do you use it on? Is there a chart that has recommended motor size to weight?
@MomentumProductions1992
6 жыл бұрын
Thank you for your awesome comment! I usually shoot with the low motor setting :) I will make a video on motor strength recommendations soon :)
@arkansashotboy
4 жыл бұрын
Mine says "searching failed"
@fhehle
4 жыл бұрын
Mine too. And tons of people have the same issue. Zero support from Zhiyun. At least next time we'll know what brand not to buy.
@naturalback
4 жыл бұрын
Me too
@diegolagunes3213
4 жыл бұрын
@@naturalback Anyone can find the solution?
@thejourneyofclapandtap4995
5 жыл бұрын
Hi Im struggling to calibrate my Zhinyun crane 2 gimbal . Could you please help.
@oddvids6803
6 жыл бұрын
I always love a good howto! Well done.
@PhuljungTulku79
5 жыл бұрын
thanks tons, your video saved me
@MomentumProductions1992
5 жыл бұрын
Awesome! I'm glad it helped :)
@BLACKTURNUM
6 жыл бұрын
Thank you thank you thank you! Just saved me so much time! :)
@MomentumProductions1992
6 жыл бұрын
Yay! Danny! I am so glad to read this!
@henriqueyago1935
3 жыл бұрын
You helped me a lot. Thank so much my brother.
@nanameolo4230
2 жыл бұрын
Good Guide line
@tscott6843
5 жыл бұрын
Still valid info. Thanks, you saved me a bunch of time.
@soamjena
6 жыл бұрын
Is this same for v1 too ? Because I dont see v1 firmware upgrade on zhiyun website
@peterstudiollc
6 жыл бұрын
I tried to use the other usb cable , but it doesn't work . It has to do the zhiyun USB cable update the firmware .
@Pompsie
6 жыл бұрын
Thanks, I love you. subbed.
@FirstLast-gs8tt
6 жыл бұрын
Awesome Job my friend! Your videos are Most helpful and save us a good chunk of time! Thanks again
@MomentumProductions1992
6 жыл бұрын
I am so glad to hear that! Thank you for the support :)
@jkolada
6 жыл бұрын
Thanks dude, really straightforward and hepful!
@BeconStudio
6 жыл бұрын
Thanks a lot...works perfect and i have now POV function. Great!!!
@maciejdominiktanski3768
2 жыл бұрын
Hi, many of us have following issue: gimbal signs "Upgrade" And than "x". And there is no use of Thatsache gimbal anymore. Do you have an idea how to solve this problem? We would be very glad hearing from you.
@videocompany4886
3 жыл бұрын
It helps a lot dude thank youu vary much !!
@susannalluch9191
6 жыл бұрын
The link to Zhiyun-Tech Download Page is not working for me... can someone help me please? :)
@whateverjustposting
5 жыл бұрын
I am trying to update the firmware on the servo. I have read that I plug my computer into the SERVO itself (only ever had luck plugging it in to the port that is supposedly meant for cameras [the camera icon is right next to this port], otherwise my computer simply doesnt recognize the servo.). I select the servo firmware update v 1.70 that I jumped through several flaming hoops to locate (why doesnt Zhiyun list it with all the other product firmware updates?), click "open" within the zhiyun tools app and then click upgrade (be sure to switch the servo into upgrade mode and also be holding the POWER button the entire time otherwise it will "close" the serial port. It upgrades and then says to turn on the GIMBAL to finish updating. I turn on the gimbal and NOTHING HAPPENS. The user manual says to get an update going you must (after turning on the gimbal - after plugging it into the computer like you say in your pinned comment) "long press" the mode button to enter standby mode (WHAT THE FUCK? "LONG PRESS"?). I do this and all it does is swap once from PF to L, and then back to PF, no matter how long I hold it. The gimbal works fine and I dont understand why I even need to fuss with it to update the servo firmware. The issue I'm having with the servo is that even though I can "set" the A/B points, they dont actually appear to be working; the follow focus moves right past the A/B points, and since I'm using a physical focus lens when it reaches the end of the range on either side there is a violent jolt and hideous grating/clicking noise. Every video Ive watched of people trying to explain how to update the gimbal software glosses over this standby mode that i need to long press the mode button to enter; is it simply not necessary? surely not because i havent been able to get the gimbal to show "upgrade" on the handle display. This is a fucking ridiculously poorly designed product and if i hadnt bought it second-hand I would have returned it by now already (and before you ask, no, the previous owner didnt break it, they barely even used it more than a handful of times.)
@bigshotsPhoto
6 жыл бұрын
This is a good tool but what Zhuyin is failing to do is tell us what is the most current version of firmware. Seems like a lot of work to find out you already have it. But no reflection on your video. thanks for taking the time to make it.
@MarioVisions
6 жыл бұрын
Is this the update to use the focus control for panasonic or is it still only canon
@MarceloGori
6 жыл бұрын
Hey Josh, good as usual!!!! Thanks again!!!!
@theampedlife
4 жыл бұрын
Josh you’re the best mate!!
@MomentumProductions1992
4 жыл бұрын
Hahah thanks man! :)
@corneliusreed4873
6 жыл бұрын
Would you please do a tutorial on updating the Zhiyun Crane 2 software using a PC?????????? Please........ I am stuck when I try to open the PTZ file........
@gerrygaldo182
4 жыл бұрын
Same here. Wish you could have a tutorial step by step. Thnx.
@leny5543
6 жыл бұрын
Love to know if you have any issues with the gimbal after the firmware update that a lot users are complaining about. Cheers. 👍🏽
@jorgealarconYT
5 жыл бұрын
hi dude, nice video, I've just got a problem with the update, its just not working, it says POV and V in the GYMBAL but somehow is not working properly and the gymbal is doing strange movements, can I downgrade the firmare and upgrade it again?
@deezyalexander2865
5 жыл бұрын
thank you bro hopefully this works for me when I'm able to do it.. you got my thumbs up and I am subscribing to your channel thanks again man
@willmovestomelbourne
6 жыл бұрын
Worked perfectly, thanks Josh!!!
@MomentumProductions1992
6 жыл бұрын
Anytime Mr. Good!
@perfectstarmakers1035
4 жыл бұрын
my cable is not working .. can we do this without cable or any other way ?
@hoikimmedia
6 жыл бұрын
after foloowing all the steps it say Zhiyun_Gimbal_Tools.dmg no mountable file system, please fix if u can.
@hoikimmedia
6 жыл бұрын
i was to update Zhiyun Crane2 and my current version is v1.66
@adventuresofwildcarrot
6 жыл бұрын
I'm having this same issue
@Fuzzmistro
5 жыл бұрын
THANKS,,, NICE AND SIMPLE. ANOTHER GREAT VIDEO JOSH.
@MomentumProductions1992
5 жыл бұрын
Thanks os much! :)
@ginotarabotto
4 жыл бұрын
Thanks man!
@satyamegadigital
12 күн бұрын
sir plz make video on crane 4
@guidolois
2 жыл бұрын
Thank you!
@cre8853
3 жыл бұрын
You’re the best thanks 🙏🏽
@MomentumProductions1992
3 жыл бұрын
You're welcome!
@otosproperty
3 жыл бұрын
dear MP, please help us...could you tell us how to upgrade firmware zhiyun crane 3 lab via pc ? thanks
@techmusic7009
6 жыл бұрын
Hi thx for this tuto i upgrade this morning my crane 2,what is the difference with the old firmware ?
@jorgeuribe6215
Жыл бұрын
hola tengo mi crane 2 en la ultima versión 1.77 y desde que lo hice los motores pierden fuerza y los modos están fallando, alguna solución? eh trato de volverlo a la anterior versión pero no la encontró
@adelhosny3331
Жыл бұрын
good afternoon , please I have a question , I have Weebil s & Camera Cannon , Why Error 70 appears during connecting to Zhiyun Gimbal?
@adilsonmoralezfotografo2529
4 жыл бұрын
Thanks for very good & clear explanation. Worked as designed :-)
@diegolagunes3213
4 жыл бұрын
I just bought a crane plus, i need to update before i used it? or i can use it just like that?
@jaybilgera2858
4 жыл бұрын
can you help, cant download the latest version from there website, firmware and drivers
@miguelgonzales3003
6 жыл бұрын
Hello Josh! I've been following you for days now and you're superb in handling Gimbal. I had a minor issue whenever I set the mode to PF or L, my Crane 2 starts to vibrate whenever I tilt it up or down. Is it normal because the gimbal should not be tilting during this modes or is it an issue? Thanks!
@AboveandBeyond44
6 жыл бұрын
So I went to upgrade my V2, step by step here. Gave me a "searching failed" message when It tried to connect, and now is a brick. Now I have screwed myself in the middle of a shoot. Anybody have a cure for this? Thanks. Super bummed
@9161yash
3 жыл бұрын
Hi i hope you are doing well I am in a emergency I am shooting a destination wedding and I am using the crane 2 and suddenly the display on the gimbal stopped working can you help
@andytimi.studiocreativo
2 жыл бұрын
Hi! Hoy can i set up my Zhiyun crane 2 with my sony a7sIIi? Thanks!
@dylanvanleuven1370
3 жыл бұрын
It’s only giving me a windows option for usb driver
@paolodetailing
6 жыл бұрын
Very nice job! I have Sony A9 a beast of camera for 4k video to!
@martinsundstrm2801
6 жыл бұрын
I know you're not exactly employed by Zhiyun, but maybe you know: Why am I not seeing Crane V2 on their download page?
@ryanfreer77
5 жыл бұрын
I was wondering the same thing. The ZY Play app on my iPhone reports that I have software v1.60 installed on my Crane v2, which is the current firmware version listed under "Crane" on Zhiyun-Tech's website. However I can't confirm whether this is specifically for the Crane v1, or both v1 and v2. Without knowing for sure, I wouldn't want to chance upgrading.
@user-jn6eq9pk2i
2 жыл бұрын
Can you help me sir? I can't upgrade zhiyun crane 3 lab with smartphone. I do try until 13 but not upgrade.
@davidtrunk5583
3 жыл бұрын
Oh boy, thank you so much dude 🤝 That was a freakin' p.. i... t.. a.. until I've found your video 😅 Well done 🍻
@SBKProductions
6 жыл бұрын
do you have to use the cable that come with it or can you use anyone that fit?
@MomentumProductions1992
6 жыл бұрын
You have to use the one that comes with it :)
@abdulrahman_5lf250
5 жыл бұрын
What about crane 3 is it the same?
@crashmediaproductions2365
2 жыл бұрын
I seriously need help updating my crane 3 Lab! I did everything like it said for updating via the ZY play app and im still getting the upgrade error message on the gimbal and can't figure out how to fix this! Please someone help :(
@luizfeliz2
3 жыл бұрын
I am very confused !! my brand new Crane 3s has no any response when I powerd on and goes on sleep mode straight away Zz !! the app could not connect with device and and firmwere is version 1:00 ! what shoud I do ?
@maciejkaron-dslr7738
6 жыл бұрын
Thanks Josh, like always helpful :)
@MomentumProductions1992
6 жыл бұрын
Thank you Mac!
@zafariqbal-js7tn
5 жыл бұрын
Thank you... Do i have to turn on tge crane or not? Because when you plugged usb cable it was off
@diggy75
4 жыл бұрын
thank you this was helpful.
@joshrosales
6 жыл бұрын
Josh any chance to factory reset my Zhiyun crane 2? as i need the time laps settings than the POV.
@domenicolucarelli3748
5 жыл бұрын
Thanks man! number 1!
@adnharshakumar7709
6 жыл бұрын
for this upgrade in crane2 the options in which crane plus are there , those options also will be there in this or its the sepaerate
@jimmm886
4 жыл бұрын
my follow focus isn't working. what can i do?
@conlineordonez3768
4 жыл бұрын
what is the actual version?
@AdventuresinFabrication
6 жыл бұрын
What changed between the old firmware and the new? My crane seems to be working ok and was wondering it is worth the effort to upgrade.
Пікірлер: 354