Amazing video! Very helpful! I have ordered the HD 20 or 30, the new one with the screen and settings. I will update you on arrival.
@Isaacmantx
2 жыл бұрын
Any updates?
@oskarmeester3062
2 жыл бұрын
@@Isaacmantx shit yes, I find that the unit is not strong enough if you want to weld pure nickelstrips which is something I do require because of high performance builds. This is basically the problem with all portable spot welders (I’ve tested 3 or 4 different portables). If you just use nickel plated strip than its fine so I would get 0.12 or 0.15mm nickel plated strip. I have now upgraded to the sunkko 709 ad which is amazing, it’s a strong and functional machine, it also has a very good built in soldering iron. This machine is more professional which I need as I’m planing a project requiring me to make tens of thousands of spot welds. If you have any questions about the device, feel free to ask.
@camielkotte
2 жыл бұрын
I needed this. thx Edit: what i noticed is that the battery indicator always shows 4 dots. When connecting to a charger it shows the actual state of charge by blinking the next indicator led. When it is half full, i.e. after 5 days of none usage or approximate 50 to 70 welds at setting 3, the welds won't stick anymore. I need full charge in mine. Appearantly the battery does not supply enough amps when half charged? Also i saw a tip about cleaning the copper tips and sharpen them or use at an angel. But the most precious was the use of, or rather the lack of, pressure. Someone on youtube actually suggested 500 ounce?!?! It was a different brand but same dimensions spotwelder but that seems way off to me.
@ridzrodz89
3 жыл бұрын
Useful video.. Terima kasih 👍😊
@alanlow6195
3 жыл бұрын
sama sama bro!
@bogmaerke
3 жыл бұрын
I bought a similar spot welder, same ratings (650A, etc.), on it's max setting it doesn't weld nearly as good as your's on 3! I wonder if it actually outputs near the 650A on max or if the manufacturer has been cheap on the battery.
@alanlow6195
3 жыл бұрын
From our experience, don't press the tip too hard to get a good weld. But I suppose different brands could have different output on their power settings. So far BIFRC been pretty good
@mirnoyan6480
2 жыл бұрын
Nice review
@arewang4973
2 жыл бұрын
After press 5 sec to shutdown & green indicator is gone, i test to put 2 probe on nickel, it still weld nickel.. is it abnormal.?
@1slicka4nd
2 жыл бұрын
I also purchase this. I just don't know what else I can use it for. Please can somebody give me some other uses joining batteries. Thank u
@ceeney6
2 ай бұрын
thanks but mines a dud it barely get the nikel to fuse on max
@pedromillan927
2 жыл бұрын
When soldering negative side of battery Ican do two or three tries but when soldering positive side it turns off at the moment of welding.... :'-(
@user-2uf2kr2c
2 жыл бұрын
Hi, do you have a link? Thx
@samsman007
3 жыл бұрын
Hi. Thanks for the video. I got 2 questions. 1. What would happen if those 2 probes were touching each other? 2. After a number of days of inactivity, will the LiPos drain itself to a safe storage level automatically?
@alanlow6195
3 жыл бұрын
Hi, if the probes were to touch each other there is redundancy design so will not damage the circuit. But the current is high and may affect the battery lifespan. Regarding the battery, it will just drain off over time. Works just like your external battery pack for mobile phones.
@AmigaWolf
3 жыл бұрын
Thanks for the video, this is a great informative video, hope you make a more of such video's. I got the same BIFRC DH20 Pro+ spot welder, and yeah it works great, made a 20v 6A Worx battery with it.
@alanlow6195
3 жыл бұрын
Thanks for the compliment
@AmigaWolf
3 жыл бұрын
@@alanlow6195 Your welcome.
@alvinteo983
2 жыл бұрын
I just got the 30 version with screen. Is there a standard table for weld? Eg. 3 for 0.8mm, 5 for 1mm etc. Thanks.
@alanlow6195
2 жыл бұрын
Hi Alvin, there's no standard table for welding. Suggest to try from lower power setting to see which works best for the different thickness
@avgear2694
2 жыл бұрын
Can i change firmware? Where i can find?
@jeffclassics
2 жыл бұрын
They have a version with led screen, you think this one is more power?
@alanlow6195
2 жыл бұрын
From what I know they have an improved version with screen because some dubious factory in Shenzhen copied their design wholesale including their brand name and selling on banggood. If in doubt over authenticity, better to get new improved led screen version
@angelffalcon3134
3 жыл бұрын
Hi . Can you tell me if i can use an 8mm x 0.15 nickel strip? Just ordered both. Thanks
@alanlow6195
3 жыл бұрын
Yes you can. Just need to adjust the power setting to get a good weld
@carolyncarpenter9682
2 жыл бұрын
Well built, looks good. Works only on the thinnest metal, tips must be clean. Useless for any serious work Ed c
@younessghir
2 жыл бұрын
Give me the link with original product
@vaikekaktus
3 жыл бұрын
Have you tried 0.2mm thickness?
@alanlow6195
3 жыл бұрын
I haven't. But if you adjust the power accordingly it should work good
@DexBerry
3 жыл бұрын
where did u buy this?
@alanlow6195
3 жыл бұрын
I got it off taobao but you can get from banggood as well. [S$76.20 16% OFF]DIY Spot Welder 9 Gears Mini Spot Welding Machine With Quick Release Pen Nickel Plate 18650 Battery Spot Welder Professional Tools from Tools on banggood banggood.app.link/JZtJTxF9Wib
@DexBerry
3 жыл бұрын
@@alanlow6195 how about shopee? do you find any link for that
@alanlow6195
3 жыл бұрын
@@DexBerry dont think its on shopee though. Can try aliexpress i think available there also
@pasqualecatalano3880
2 жыл бұрын
non salda niente, appena la striscia di niche in dotazione
@NyyphoHerr-3D-panorama
Жыл бұрын
4:02 - See how a really good welding should work: 1) There should not be much heating under the base. 2) there must be high-quality welding so that it does not come off with your hands. Your welding at 4:02 is not satisfactory. Look at real good spot-welding: kzitem.info/news/bejne/o2p7uYxtcYJ5m6A
@nadeemuk6194
Жыл бұрын
Hi I have same one welder but problem is I have been facing when I press the on button green light not stay on like gear green light welder keep if Then I press on button again After one weld again spot working
@alanlow6195
Жыл бұрын
Hi you probably have a defective unit
@palanskisimmons
Жыл бұрын
Thanks for the advice I just ordered me 1 👍
@johnnybuoy9551
2 жыл бұрын
is it really effective? I mean such a small battery.. Can it last for long? I am getting skeptcal
@alanlow6195
2 жыл бұрын
It works differently than Lipo cos its discharge rate is very consistent and can discharge to lower than nominal of 9.9V
@rverdonk3
3 жыл бұрын
Omg you crickets in your house!.I can hear them at 5:35.Call the insectkiller :-p
Пікірлер: 43