Scott: Within Logic, if you go into the drop-down menu entry "Settings... / Display...", there is a setting in the "Displays" section called "Display Middle C As:". By default, it is set to "C3 (Yamaha)". If you change this to the alternate setting "C4 (Roland)", your Note Names and MIDI numbers will align in accordance with those indicated in your DMX controller documentation.
@ScottUhlMusic
Жыл бұрын
BOOM! Knowledge! Thanks man, I appreciate it! I was wondering why it was doing that. I seriously didn't even think about it until I was editing and I was like... wait a minute. I appreciate the definitive answer! Thanks for sharing.
@theplinkerslodge6361
Ай бұрын
I watch a TON of instructional videos on KZitem and your style with this vid is OUTSTANDING. No dawn-of-time explanation, I learned more by just following what you did than any other video would hand me. Thanks a ton.
@ScottUhlMusic
Ай бұрын
Thank you! I appreciate that :)
@izzy4el
Жыл бұрын
USELESS TRIVIA: Way back in the day when my brother and I first got midi controllable lights we showed up in the A.M. after a gig the night before and programmed every light and scene laboriously one at a time. We spent HOURS doing this, Until our sound guy came in and said "Why don't you just copy the horns track midi and send it to the lights?" Haha We were so pissed! It really was that easy with the gear we had at the time! Great video Scott. I'm amazed at how doable all of this stuff is today. Thank you for this video!
@ScottUhlMusic
Жыл бұрын
😂😂😂 the number of times I’ve spent hours doing something just to find out there is an easier solution hahahaha
@mauroo33
Жыл бұрын
This channel gets better and better!
@ScottUhlMusic
Жыл бұрын
Thank you! 😊😊
@wilcandou
Ай бұрын
You do a great job Scott... any band would be fortunate to have your skills. Well done.
@ScottUhlMusic
Ай бұрын
Thank you 🙏
@NelsonClick
11 ай бұрын
Wow!! Excellent video. There is an art and skill to disseminating information and you evidently have these. You don't stutter or sound unsure and you move forward at a strong pace. You don't linger with inconsequentials, you're thorough and complete every idea presented from beginning to end. There are no other videos on YT about this subject that is this good. You show and tell, explain and demonstrate. Bravo. Subscribed. Thank you.
@ScottUhlMusic
11 ай бұрын
Thanks man! I appreciate that! Editing takes sooooo long with these videos, so I’m glad to hear people appreciate it 😁
@Thenoisemusic
10 ай бұрын
You're such a positive person. Thanks for the amazing tutorials!
@ScottUhlMusic
10 ай бұрын
Glad you like them!
@CHASETHE28
3 ай бұрын
Brilliant - thank you! 🙏 We use Stage Traxx to send MIDI to MainStage to trigger FX, now we can control the lights as well🥳
@ScottUhlMusic
3 ай бұрын
Nice!
@oneminuteguitarlessons6060
Жыл бұрын
Thanks! I emailed you about trying to run my lights with my iPad and you were kind enough to point me to your video. I have watched it a few times but something clicked. There are to routes for me to accomplish what I want but I have now managed to create a midi track, export it to MT and have it cue my Chauvet Foot C-2. So, I know I can make that work. Next, I am going to try and get the Photon-2 app to trigger the show. It seems much slicker. Thanks.
@ScottUhlMusic
Жыл бұрын
Awesome! Thanks for this comment, and I’m glad the video clicked for you!
@MattTube
6 ай бұрын
I’m really excited for the w1mk2. This would work as your “box” if you will. This device is amazing, I’m blown away. The M2 had usb that can have a midi input. The midi input can trigger lighting scenes you setup within the w1mk2! It also makes patching fixtures a dream!
@My_Dream_Sailing
2 ай бұрын
Excellent 🤓 The video is a super-cool summary and introduction - all you need for being successful!
@Andrew_O
Жыл бұрын
I used to use FreeStyler DMX software on a laptop (with USB-DMX dongle) to control my lights which were mostly 2 moving head spots with GOBO's and 2 7-LED PAR's. Along the way I picked up a far number of wireless DMX units like yours before completely downsizing to a boring all-in-one T-Bar like every other one you'd have seen with a foot-switch. I do still have all of that other gear and occasionally consider getting back into it, but since I bring the PA most of the time the extra load-out and low pay tends to make that unappealing. Always open to new ways to do this and if I get into backing tracks like you've put out so many great tutorials about this may be that "next level" thing to bring the show game up a notch. Cheers!
@ScottUhlMusic
Жыл бұрын
Thanks! And yeah, bring lights AND PA can be a lot for sure. Being in Colorado, anytime it’s in the mountains, the load in is always a nightmare. I’ve had to take it up ski lifts (well, enclosed ones) before lol. It definitely made me want to downsize. I have a pretty small setup that actually does work quite well though!
@cklassen
5 ай бұрын
So helpful! Y'all, we need to get this guy to a MM Subs. Its a crime you are not there already Scott
@ScottUhlMusic
5 ай бұрын
Thank you Chris! 🤘
@cedricchabot9996
6 ай бұрын
You always have answers to my questions, i absolutly learned a lot on your channel. Thanks man.
@ScottUhlMusic
6 ай бұрын
Glad to hear it!
@paullongden-musician7113
Жыл бұрын
Looks like I've got two introductory videos to catch up on. Thanks for the great content Scott
@ScottUhlMusic
Жыл бұрын
Glad to help 🤘
@shawnkichta7076
Жыл бұрын
Great vid as usual. I do this with a Chauvet Foot-C2, which is a little more limited than a full controller, but is perfect for what I need and adds emergency foot control over the lights for instances of "technical difficulty" that inevitably arise. Thanks again for all you do!
@ScottUhlMusic
Жыл бұрын
Nice! I haven't heard of that one and I'll have to check it out. Thanks!
9 ай бұрын
With a few bands I play live with, we use a cymatic utrack 24 to send backing tracks to FOH and to our iem monitoring system BUT it also has a midi out that we use for lights. It's discontinued since the brand no longer exists but check it out and if you find one 2nd hand I suggest you get it because it's really a neat piece of gear to have !
@retrobutionband1147
9 ай бұрын
I just purchased MC6 Pro to change my splits during a song but also have it control DMXIS (that I helped the developer Dave Brown troubleshoot), vox FX, Axe FX, and Roland kit. Ableton is my VST host for complex 80s patches and counts us in. My band doesn’t use backing tracks but I do for solo gigs. -John Ianni
@ScottUhlMusic
9 ай бұрын
Nice! Great setup you have there, and thank you for the donation 🤘😊 I appreciate it!
@oneminuteguitarlessons6060
Жыл бұрын
Exactly the video I was looking for and couldn’t find anywhere. Thanks
@ScottUhlMusic
Жыл бұрын
Glad to help 🤘
@ixtapavangogh
4 ай бұрын
You have helped me more than you know. SUBBED!!!
@ScottUhlMusic
4 ай бұрын
Thank you 🙏 Glad to hear it!
@reminerb5838
11 ай бұрын
Thank you for making great videos, I`ve learned a lot from them! I have been looking for a lighting/DMX setup that can be controlled by Stage Traxx and also supports fades, and I think I finally found a good solution using Stage Traxx app, Photon 2 app and a DMX King MAX 1 connected to a wireless router. I tested the setup live last saturday and it worked flawlessly. Earlier I`ve been using a similar controller to what you are demonstrating in this video, but I really wanted the possibility to program fades. Big thanks to you Scott and to CaliforniaCreedence, for making great and useful content!
@ScottUhlMusic
11 ай бұрын
Thanks! I just started using the DoreMidi Midi to DMX converter and it’s been working very well! Video coming soon
@reminerb5838
11 ай бұрын
@@ScottUhlMusic good to hear, I look forward to watch the video 👍👍
@giarebig474
Жыл бұрын
for fading in/flashing the lights I use the standard midi control CC00. values between 0-5 are very usable
@gtrdaveg
7 ай бұрын
Is that because your hardware supports CC input, or because all hardware supports CC input and some manuals fail to mention it?
@dylanhoward718
11 ай бұрын
Just started doing this with my helix. I can change scenes,chases, switch from rhythm to lead tone, bypass or unbypass different fx all with a single foot switch press. I've got it setup with my snapshots as verses and chorus for each song.
@ScottUhlMusic
11 ай бұрын
Nice!!
@Bluebear2016
Жыл бұрын
Haha love that you use my exact setup. I use the MC6 pro to control stage Traxx which sends midi to the ADJ in my rack with widi Jack to control my ape labs lights!
@ScottUhlMusic
Жыл бұрын
Nice!! Good choices 😊
@k0csisgab0r
Ай бұрын
Thanks!
@bbrrwwnn
7 ай бұрын
That MVP unit is very interesting. Hope they send you a test unit soon. Subscribed!
@ScottUhlMusic
7 ай бұрын
I’m going to talk to them at their booth at NAMM. Looking forward to finding out more!
@miniontoby
Жыл бұрын
OSC is also really helpful for DMX and for making custom DMX devices.
@ScottUhlMusic
Жыл бұрын
I need to look into that more. I’ve heard good things about it
@jakeurban2836
2 ай бұрын
Amazing video! Have you explored using the b-beat to control lights while also doing helix patch/snapshot switches or something similar? Or would you do a video like that? Very specific situation I'm after here but would be real handy :D
@ScottUhlMusic
2 ай бұрын
Thanks! And yeah the B beat can do that for sure! I have videos on my channel of controlling helix with midi 🤘
@thaddeuscleo5920
4 ай бұрын
Anyway this is just an input to help. Maybe you can try to pre program the lights then use midi to sync the lights with the music tracks.
@ScottUhlMusic
4 ай бұрын
You, that would be a great way to use this 👍
@emersontanakamotion
Жыл бұрын
Great video...looking forward for the B Beat video!
@ScottUhlMusic
Жыл бұрын
That thing is wild!
@scottharris6105
3 ай бұрын
Scott, when you go into stagetraxx 3, edit lyrics area, what is this area/type of programming called? I'd like to look for documentation to learn more about what is possible. Thanks.
@ScottUhlMusic
3 ай бұрын
My stage traxx midi video is here: kzitem.info/news/bejne/s2t_r6ajg4l8fW0si=BtPYcpw7_iH6MeJm
@ventman2au
Жыл бұрын
Another very informative video mate. Cheers.
@ScottUhlMusic
Жыл бұрын
Thanks Alan 🤘🤘
@Ray9s
Жыл бұрын
You asked for a box that just takes MIDI commands and outputs to DMX. Have you ever taken a look at the DecaBox MIDI to DMX Converter? Looks like it does exactly what you're looking for. Also, thanks so much for the videos. I've watched this one several times just trying to figure out what to do with my light show.
@ScottUhlMusic
Жыл бұрын
Yes!!! It looks amazing and exactly what I’m looking for! One other person recommended it, you are the second one. I definitely want to get that 🤘🤘
@HuttyTheKid
Жыл бұрын
My new favorite channel wow
@ScottUhlMusic
Жыл бұрын
Thank you! 🤘
@scottharris6105
3 ай бұрын
HI Scott, Could you possibly do a tutorial on programming chases with the operator 384, storing chase speeds and fade times and then programming in stagetraxx 3 a complete song switching between scenes and chases. I'm struggling to figure this out. Thanks
@ScottUhlMusic
3 ай бұрын
Yeah I want to figure that out as well
@aaronl7669
3 ай бұрын
Hey man, great video. I'm wondering why I might want to use/convert to a midi controller rather than just buying a DMX foot controller like the Eurolite DMX Move Bigfoot?
@ScottUhlMusic
3 ай бұрын
Thanks! And using software is definitely easier, but this is a helpful way to do it without having to use a laptop or software
@tinsweep
Жыл бұрын
Curious to see some of those new products. I've just been trying out Lightkey to send MIDI from my Ableton tracks, then from the laptop to Artnet. It seems to work well enough, but would love something easier to set up for a cover band sized catalog.
@ScottUhlMusic
Жыл бұрын
Nice! The b beat video will be out next week. Definitely curious on checking on that MVP. My computer is too old to handle ALL the midi, tracks, lighting, and video for my live show haha
@samremmusic
7 ай бұрын
Hi Scott, did you manage to figure out the fade timing issue between scenes?
@ScottUhlMusic
7 ай бұрын
I did not, no
@IvamMedeiros
9 ай бұрын
Hey Scott, I'm glad I found your channel. Pulling my hair out in trying to automate tracks with DMX from Mainstage. This video helped a lot. I could get the scenes trigged as I added notes on the MIDI track in Logic. When I export the track as MIDI point out the exact same channel that worked with logic, and load it in Maistage it doesn't work. As far as I know, Mainstage only sends the MIDI file once and when I change the patch. Let me know if you have any thoughts of what I am doing wrong. Thanks for sharing such a valuable content.
@ScottUhlMusic
9 ай бұрын
Interesting… I tried MainStage years ago and decided to go with ableton, so I’m not familiar with MainStage. Try using that midi file in different software and see if it’s a problem with MainStage or the midi file.
@andyhutch7164
Жыл бұрын
Hey Scott ,Great video , Have you looked at the Enttec dmx usb pro it can store show on, you still need a controller or app, But once you have built you show it can store it so no need for a laptop . Keep up the good work .
@ScottUhlMusic
Жыл бұрын
That’s really crazy you mention that because I JUST read that like 3 minutes ago haha. Good timing! I have to look into that more. I cannot stand that their software is a subscription though. That’s drives me nuts.
@andyhutch7164
Жыл бұрын
@@ScottUhlMusic not sure if it's subscription now but mine was around £120.00 and that's all I payed , I brought the extra Breakout leads which has midi in and midi out as well as the dmx in,s and out,s, I build my shows with D-Pro which is now subscription but wasn't when I bought it I bought the lift time license so all good their. Have a look into it may work out for you. Great channel you have has helped me a lot so thanks and keep up the good work
@joeydego2
10 ай бұрын
After using the ADJ 384 controller a little more, I feel like the DMX implementation could have been better. When you select a scene and go to another bank and select another scene, it doesn’t shut off the first scene. If you go back to that first bank the scene will still be on. A scene should trigger the previous scene off.
@joeydego2
10 ай бұрын
Also blackout should have an all scenes off function. This way you can start a programmed song fresh. Changing songs around a list for different shows will create all sorts of conflicts between beginnings and endings.
@aschelocke5287
Ай бұрын
@@joeydego2can you recommend a better alternative?
@CarsonHoy
4 ай бұрын
Shoulda known it would be wireless 🔥
@MatthewMadore
Жыл бұрын
Thank you
@ScottUhlMusic
Жыл бұрын
🤘
@martinmichaels234
4 ай бұрын
do you have a video where the audio is playing while the midi is controlling the lights? from 1 Ipad... thx
@ScottUhlMusic
4 ай бұрын
Not for this, but the idea is the same… send midi from a device that can send audio and midi and it will work 👍
@RegionalOneBand
5 ай бұрын
Have you found a way top run the MIDI commands as a synched track or something, from your SPD? We run our Backing Tracks from the SPD-SX, hoping we can tie this to lighting also by sending a synced track on maybe the sub output to a DMX controller?
@ScottUhlMusic
5 ай бұрын
I haven’t tried outputting midi from the Spdsx, just inputting midi. I would have to look into that because I’m not sure if it does allow that
@RegionalOneBand
5 ай бұрын
hmm yeah, we'll have a look into it also :) @@ScottUhlMusic
@roscius6204
Ай бұрын
You can't sync to a tap tempo, so could you possibly do this at the midi controller tap temp a sequencer that can send midi out. an arpeggiated lighting chase might be cool
@ScottUhlMusic
Ай бұрын
I wasn’t able to figure that out
@roscius6204
Ай бұрын
@@ScottUhlMusic Could be great for the keyboard solos too. Seems like it should be doable given a midi keyboard will send note values.
@LucianoVarelaClasesdebateria
Жыл бұрын
Awesome video man! thanks a lot! Is there something that might replace DMXIS on the market?
@ScottUhlMusic
Жыл бұрын
I need to find one, Dmxis was so great
@MarkKnightasElvis
4 ай бұрын
Hi Scott, I use StageTraxx on Mac. Great videos BTW. I can't use midimittr on my Mac. Do you have any suggestions as I don't have a pedal or any other hardware?
@ScottUhlMusic
4 ай бұрын
Thanks! And you can use the Widi Master / WIDI Jack: kzitem.info/news/bejne/qJCMrWaLn6l7Z6wsi=Oa8IVF4JkFCk5S98
@hbxrcbil
4 ай бұрын
Hi, do you change the MIDI/DMX switch when triggering from MIDI and not from the controller? I'm trying to get my lights trigged from Cubase but they are dead. Works from the controller (same as you have) The USB interface is Roland UM One. Can that be the problem?
@ScottUhlMusic
4 ай бұрын
If I understand your correctly, this might be a better solution for you: kzitem.info/news/bejne/039ptX-Bq3p4g3Ysi=HH5dZ5bOxhPcZIiV
@hbxrcbil
4 ай бұрын
@@ScottUhlMusic I mean the switch on the ADJ 384. Is it set to DMX or MIDI when you control it in daw? My USB blinks-interface and gets signal, but nothing happens with the lights so something is wrong clearly.
@halv3r357
3 ай бұрын
Hello Scott, thanks for the tutorial, really helpful ! Nevertheless I do have one question, I'm using the operator 384 as well, do you know if there is a way to control the intensity via midi ? From what I understood, via midi, I can only select bank, chase and scene, but I would like to have my red intensity fading, do you know if that's possible ? Cheers
@ScottUhlMusic
3 ай бұрын
I believe that’s with the value of midi if I’m not mistaken. But I find this method is better for triggering scenes mostly
@halv3r357
3 ай бұрын
@@ScottUhlMusic you mean with CC ? I tried some CCs but no result on intensity so far :/
@leifpearson5205
27 күн бұрын
Scott have you used photon 2 to trigger from st3 and allow for auto beat detection lighting?
@leifpearson5205
27 күн бұрын
Also have you thought about using maestro DMX?
@ScottUhlMusic
27 күн бұрын
Haha I’m working on a video right now about Maestro, so good timing! I have a call with them today for some setup stuff. And I’m interested in Photon 2 for sure 👍
@BrandonSherman-oi9hf
2 ай бұрын
Can you use midi to control rotating heads?
@ScottUhlMusic
2 ай бұрын
You can, but that would be pretty tough with something like this unless you were able to trigger scenes
@joeydego2
10 ай бұрын
I purchased this same lighting controller. This works with a Widi jack only AFTER: You flip the polarity switch. This took a half hour out of my life. You have to power the Widi jack. The ADJ sends no power from the midi out. Other than that I’m up and running.
@ScottUhlMusic
10 ай бұрын
It’s always a half hour to figure out one switch needs to be flipped lol
@joeydego2
10 ай бұрын
@@ScottUhlMusic Can you verify if the ADJ 384 USB port provides power to a WIDI device?
@joeydego2
10 ай бұрын
Just for documentary purposes if anyone else stumbles across this: the midi output jack WILL NOT power a WIDI device, such as a WIDI jack. The USB B jack will, however. Amazon USB B to USB C cable and problem solved.
@kurtfriedenberger8839
7 ай бұрын
Scott, is there a way to program/create a midi light show in Logic via DMXis software (alongside the backing track so it’s perfectly on time) and export the midi data to stagetraxx3 in the backing track file?
@kurtfriedenberger8839
7 ай бұрын
While using the enttec DMX pro hooking up to my computer to speak to the lights
@ScottUhlMusic
7 ай бұрын
Dmxis hardware needs the software to work, so unfortunately you cannot export it to ST3
@jakubkratochvil9097
11 ай бұрын
Hey I was wonedring if I have a launchpad X and i connect it to a PC and then connect a usb to dmx cable from a pc into the lights do i still need to get a midi to dmx controller like you have the adj dmx operator 284 or would it just work with the lanuchpad to pc and pc straight to lights?
@ScottUhlMusic
11 ай бұрын
I haven’t used the launchpad X so I’m not sure
@jakubkratochvil9097
11 ай бұрын
does the usb to dmx cable (plugged from oc to lights) change midi to dmx instead of the dmx controller?
@jakubkratochvil9097
11 ай бұрын
also if the lights dont have presets but have channel 1 is red channel 2 green channel 3 blue and channel 4 is stroboscopic all have 0-255 is there a way to controll that with the pc? btw i want to use it live not program it
@mipiaceiltubo
Жыл бұрын
Hello, great tutorial, congratulations. Do you know Edvard Hansson? I would like to try creating a light show like he does with a visualizer such as Wysiwyg or Daslight, using only a DAW (Cubase in my case) before testing it with actual lights. Do you know how it works? Would you be able to explain it in a video? I have been desperately searching for someone who can explain it for at least 10 years, but I have never been lucky enough to find someone who can explain it to me...
@ScottUhlMusic
Жыл бұрын
I haven’t heard of Edvard, but I’ll have to check it out 👍
@gomarslive
Жыл бұрын
I have an iPad Pro 12” that only has a USB C output. Is there a way to use my 1 iPad, to play tracks and control lighting simultaneously? Can you output USB-MIDI and mini Jack to a splitter, simultaneously, aswell as charging?
@ScottUhlMusic
Жыл бұрын
Interesting… I haven’t tried that. But you could use the widi master or widi jack to wirelessly send midi commands and still have access to the usb c port for other stuff 👍
@gomarslive
Жыл бұрын
@@ScottUhlMusic I’ll give this a shot. Thank you Scott. Love the channel 👌🏽
@giarebig474
Жыл бұрын
but you could help me out: tell me how I can program midi-commands to have a kind of "in between"-light (white) when a song ends and the next song starts. thanks in advance
@ScottUhlMusic
Жыл бұрын
You would just trigger a white scene between songs 👍 same way to you trigger any lighting with DMX
@giarebig474
Жыл бұрын
problem is, I don't work with "scenes". I treat light like midi-notes. There are only 4 pitches for blue green red and white from C0-D#0 and I'd like to have (for example) white (D#0) to hold till the next song starts. I use Eurolite LED CLS-18 QCL RGBW. There is an app called MPS by miditool I use, that can do that when ever I stop the song (as it tuns off the reverb etc...) I even sucked out the midi-notes it sends for the "pause"-light, but if I send it from a different sequenzer-app like cubase/logic... it just doesn't hold it... but it is a windows device and therefor not very stable - having troubles with drivers all the time. So I search for a Mac or IOs - solution...
@joeydego2
10 ай бұрын
Will this lighting controller send midi messages for programming stagetrax?
@ScottUhlMusic
10 ай бұрын
My understanding is that this DMX controller can be used to send midi. But I’ve never done that personally…. And I would just get a midi controller for that purpose instead
@joeydego2
10 ай бұрын
@@ScottUhlMusic My disconnect in understanding here is why wouldn’t I want to use the controller that is already right in front of me? What is the benefit to sending the command with another controller? Wont that just add an unnecessary layer of complexity?
@ScottUhlMusic
10 ай бұрын
@@joeydego2 I need to look into it more, but I believe it either sends DMX or MIDI, but not both. I prefer Foot Controllers for MIDI, but definitely do whichever works best for your setup!
@joeydego2
10 ай бұрын
@@ScottUhlMusicYou are correct. There is a switch on the back for DMX OR Midi, not both.
@davidemessina1970
Жыл бұрын
Hi, can I control DMX mixer with MIDI program change or it is possible only with MIDI note?
@ScottUhlMusic
Жыл бұрын
It depends on the DMX controller
@booxwee3804
Жыл бұрын
This is kind of a long shot, but I just got into dmx controlling and got a pretty basic controller. I got the hang of creating scenes and chases etc. I run into problems when trying to use midi controlling. I cant get the controller to recieve the midi notes, The setup is pretty simple, DAW (fl studio) -> USB midi to DMX -> DMX controller Im pretty sure the midi channel setup is correct, but Im kind of at a loss and cant figure out what Im doing wrong. Any help is appreciated :)
@ScottUhlMusic
Жыл бұрын
That could be so many things to be honest. My best guess is that it’s the way the computer is setup to output midi is off. That’s usually the issue. I would mess with FL to see if it’s outputting midi correctly 👍
@booxwee3804
Жыл бұрын
@@ScottUhlMusic Turns out I connected the wrong MIDI cable into the DMX controller, should have checked it before doing hours of troubleshooting hahah
@jamesrotenberry4989
Жыл бұрын
Hey Scott….I was just wondering if you are familiar/used this or and similar unit….. Behringer C210 200W Active Column Speaker
@ScottUhlMusic
Жыл бұрын
With a speaker? Like a PA speaker?
@jamesrotenberry4989
Жыл бұрын
Lol….this is just a random question….not pertaining to this particular video….have you every used these types of speaker systems
@ScottUhlMusic
Жыл бұрын
Oh lol. I was so confused haha. I have the EV evolve 50s and I love them!
@tangobasso
Жыл бұрын
Would using the wave generator on the MC8 help with the limitations you mentioned?
@ScottUhlMusic
Жыл бұрын
🤔 how would that work? I’m intrigued!
@tangobasso
Жыл бұрын
@@ScottUhlMusic I haven’t played around with the wave generator, so I don’t know about it’s full potential. But if it’s possible, the waveform could modulate between CC values of 0 and 127. If you set the waveform duration for quarter notes, you could trigger lighting events to turn on precisely on the downbeats.
@ScottUhlMusic
Жыл бұрын
@@tangobasso Oh man that would be interesting for sure! I don't know if my ADJ controller responds to CC commands though.
@danielritter687
10 ай бұрын
use freestyler with usb DMX interface! It is much easyer…
@ScottUhlMusic
10 ай бұрын
I’ll have to check it out, thanks!
@davidstewart4149
Жыл бұрын
Roland VC-1-DMX? YuanKanJu DecaBox MIDI to DMX Converter?
@ScottUhlMusic
Жыл бұрын
Holy shit that second one might be it!!!!!! Thank you for sharing. I’m going to look more into that 🤘🤘🤘🤘
@mikesage2043
Жыл бұрын
Another option might be the doremidi midi to dmx box mtd-1014
@davidstewart4149
Жыл бұрын
Roland VC-1-DMX?
@ScottUhlMusic
Жыл бұрын
Oooh interesting… although it seems like it says it changes the lights based on the incoming video and audio signals. I don’t know if it’s as programmable as I want it to be? Like can I send CC1 (or note 12 or whatever) and it loads what I’ve saved for scene 1?
@ScottUhlMusic
Жыл бұрын
Actually… I watched a tutorial on it, it’s pretty wild! I think that other one you said would be better. Thanks for the suggestions!
@rackmax8058
Жыл бұрын
Hey Scott thanks for your videos. Without your videos I would still be in the dark. Is there no solution from CME to drive midi dmx? May be the widi uhost? I want to use the M live b beat , to control two modeling amps and the light. Thx for your Help.
@ScottUhlMusic
Жыл бұрын
You should be able to use wireless midi from CME to control lighting the same way it works in this video 👍
@anthonytalley55
10 ай бұрын
MTD 1024
@ScottUhlMusic
10 ай бұрын
My next video is on that 🤘
@richardwelbourne955
Жыл бұрын
So now I'm looking at my Helix, thinking 'this can send midi commands...'
@ScottUhlMusic
Жыл бұрын
Yup! It definitely would work for this!
@anthonytalley55
10 ай бұрын
What about this Bro DORMIDI MIDI TO DMX
@ScottUhlMusic
10 ай бұрын
Working on a video now 👍
@maxscumbag
Жыл бұрын
I’m thinking of running this setup, but just wanted to know, how can I change the intensity of the light? By that, I mean fade from black to full white at a speed I’d like? Cheers for the great video!
@ScottUhlMusic
Жыл бұрын
With this exact setup, the speed function is the toughest. That’s why digital software can have more control over it
@maxscumbag
Жыл бұрын
@@ScottUhlMusic Ah - that's what I suspected. Sorry, I'm a complete beginner (if it wasn't already obvious), so do you have any pointers for how I can add said digital software to the setup? Cheers mate
Пікірлер: 163