I've been using an Anycubic Mono for years, no trouble whatsoever. I prefer the Crealty Grey that is water washable and very strong, with just the right amount of flex.
@ColinKlupiec
2 ай бұрын
Thanks, that's a good tip on the Creality Grey. Always good to find out about different strong and flexible resins.
@MrJBA79
2 ай бұрын
I use it for everything, it's soo cheap.. also, you don't have to stock iso and then dispose of it ethically. I just take it to my bathroom because my toilet is fancy and has triggered hand nozzle that is no joke, I just pull it over to the basin and have at it. Then I printed this little holder for a single Stanley blade and it's easy to get under even tiny prints.. right there in the basin. Now, every time I use my printer I'm also fully washing the enter head assembly and it's no effort at all. I wait for it to go on special and stock up. @@ColinKlupiec
@johncarter6572
Ай бұрын
Thank you 💖💖💖💖
@ColinKlupiec
Ай бұрын
You’re very welcome.
@darthhall6187
2 күн бұрын
Hi, I tried this using your guide but my Mono M7 pro won't recognise the file I saved using the R_E_R_F name. I wonder what the problem could be? I can use the file that comes on the USB stick, but would prefer to use my own file really.
@ColinKlupiec
2 күн бұрын
Hi, thanks for your question. When you sliced the file, did you make sure that the slicer was set to the M7 Pro? Sounds like a silly question, but I've got a few printers set up in Photon Workshop, and I've made that mistake before. Just enter R_E_R_F and let the slicer put the suffix onto the file name. Also, are you using the Anycubic slicer? If not, you may wish to use it just for creating this file.
@darthhall6187
2 күн бұрын
@@ColinKlupiec Hi, thanks for your reply. Yeah, using the anycubic slicer, and it's set to the m7 profile. It's really strange. I'm fairly new to printing, so perhaps I'm missing something else.
@ColinKlupiec
2 күн бұрын
@@darthhall6187 One other thing you could try... was the original R_E_R_F file written in Chinese script? You may need to copy the characters of the original file supplied with the printer, and then copy those instead of the English R_E_R_F characters. I had that on the Mono X 6Ks. That printer accepted both the Chinese characters, or the English characters.
@darthhall6187
2 күн бұрын
@@ColinKlupiec I think its a fault in the firmware. It is now not reading any saved files at all. Very annoying. Will contact their customer service once my anger subsides. Thanks for your input all the same, much appreciated
@ColinKlupiec
2 күн бұрын
Sorry to hear that. Hope you get it sorted. Anycubic is usually ok with support and they should help you out.
@kolschejung4465
2 ай бұрын
could you please upload the file, i have the same printer
@ColinKlupiec
2 ай бұрын
You can download the Photonsters file here www.printables.com/model/229429-photonsters-validation-matrix-v2
@LoremIpsum1970
2 ай бұрын
Hi Colin, which printer and resin is your go-to for your functional parts? Have you shared your modelling process and print build settings for your parts?
@ColinKlupiec
2 ай бұрын
Anycubic Tough Resins. The Tough Resin 2.0 and Tough Resin Ultra are excellent. Use the Ultra if you need super flexible. You can use this affiliate link and coupon to get $25 off. store.anycubic.com/products/tough-resin-2?ref=CK Coupon code: CK3DPRINT. Haven't done a video on my process for parts. It's a good idea...I'll add it to the 'to do' list.
@LoremIpsum1970
2 ай бұрын
@@ColinKlupiec Thanks, will do! What about prefered printer? I'm opting for Anycubic now...
@ColinKlupiec
2 ай бұрын
@@LoremIpsum1970 Sorry, forgot to mention. For functional parts I actually like a small build volume printer to start with. Less resin to work with for each prototype. Then if you need to print multiples you can go with a larger one. Just my preferred way. My favourite printer is actually the Anycubic Photon D2 DLP. There are many advantages of DLP, and the D2 has recently seen a huge price drop. I have two larger Anycubic printers as well, but for starting the prototyping process I always start with the smaller D2. store.anycubic.com/products/photon-d2-dlp-3d-printer?ref=CK
@LoremIpsum1970
2 ай бұрын
@@ColinKlupiec Brilliant. Thanks for the reply, will look into that.
Пікірлер: 19