Thanks for showing the beauty of the 1 switch looper and the use of command center.
@jimmcdougall9973
3 жыл бұрын
This must be the best tap dancing lesson I’ve ever seen! The extent of your talents ceases to amaze me.
@Newnodrogbob
3 жыл бұрын
Do you mean “never ceases?”
@jimmcdougall9973
3 жыл бұрын
@@Newnodrogbob purposefully left out 😉
@picksalot1
3 жыл бұрын
I like loopers, particularly for quickly creating a groove to jam with. They help inspire me, as the free up my fingers to explore different parts, textures, and rhythms. I agree, reverse is a lot of fun. I have a JamMan Stereo Looper, so combined with the looper in HX Stomp, I can have twice as much fun! Thanks
@BillySoundFarm
2 ай бұрын
Thank you so much This is the only how to line six looper video that was any help to me
@tossedpenny
3 жыл бұрын
Awesome tip, it never crossed my mind to mix up the reverse and half tempo options to get some interesting loops. Definitely going to try this.
@chrishandley
3 жыл бұрын
Cool instructional idea, I'll certainly revisit if I get a Helix or similar... 👍🏼
@jamescampbell5594
2 жыл бұрын
This is fantastic. Exactly what I needed re: assigning loop controls to additional buttons on main stomp page, thanks mate.
@guitarjonn7103
9 ай бұрын
I think it's worth mentioning, if it hasn't been brought up, is your footwear could be a factor in getting things in sync for recording and playback of the looper. I've found that softer soles on my shoe or soles that have tread on them (like a sneaker) can effect your timing when you trigger the looper (a wide sole can also be an issue). A harder, flatter, narrower sole is much more dependable.
@saddestchord7622
2 жыл бұрын
Thanks for this. I had tried looping with the Stomp and it was like the switch didn't always work the way I expected, so I gave up on looping with the Helix and forgot about it when I got an LT. This 6-button looper is a lot better, so I can take the old Boss looper off my board now. If they'd add a really simple drum machine or even just a metronome it would be great.
@ymelfilm
Жыл бұрын
Stomp HX looper literally sucks.
@JohanJoosLaur
3 жыл бұрын
9:46 : John, we told you many times...Irish coffee in the morning is a bad idea...look at you...😕😂😂
@johnnathancordy
3 жыл бұрын
Man it nearly got me
@JohanJoosLaur
3 жыл бұрын
@@johnnathancordy That shot looks like an action movie scene, I love it ahahaha
@MySleepingQuarters
2 ай бұрын
cheers bro - helped massively!
@thisisebo
2 жыл бұрын
Nice demo, it helps a lot. I usually use my helix + Boss RC loop pedal. Now I can use Helix the utmost. Thanks a lot!
@stevebowley6348
3 жыл бұрын
very useful John, great video and playing as always...
@Rockstar69000
Жыл бұрын
I wish the helix had a built-in drum machine so that’s why I use my Digitech band creator also
@ssiowi
3 жыл бұрын
Thanks John. Your work here persuaded me to spend more time with this Helix feature. I love the Helix yet have opted to loop with my Boss RC-3 and FS-6 combo. You make a great case for looping via my Helix. Also, good on ya mate for implementing Snapshots; I'm a fan. Keep the great content coming Sir. Cheers from Spokane, Wa.
@deanandthebeans857
Жыл бұрын
Hi - is it possible to sync the loop to external midi? Thanks!
@hockeyman2274
3 жыл бұрын
Great instructional video - Thanks!
@reubenlim2619
3 жыл бұрын
MIND BLOWN. THANK YOU
@howellsband
Жыл бұрын
You are a beast of a player
@mirllewist3086
2 жыл бұрын
Nicely done - thank you
@jakollee
3 жыл бұрын
Fascinating video, I'm gonna have to watch it again. I tend to do much longer loops with my ditto and sometimes it's a bit challenging to get the timing right (of course I should use a metronome!). That reverse feature is very cool!
@2ShadesOfGray
3 жыл бұрын
Good tutorial, thankyou
@ymelfilm
Жыл бұрын
The double stomp to stop freaks me out
@johnnathancordy
Жыл бұрын
Timing on that can get iffy can't it
@ymelfilm
Жыл бұрын
in practice , it is cumbersome for me. Tired of it. I go with the 1 stomp stop loopers. @@johnnathancordy
@jnh73
3 жыл бұрын
Also, I don't think you mentioned it John (possible I missed), though when you switch into 1/2 Speed mode, it drops an octave (or raises it up an octave if you're in 1/2 Speed and going back up to Full mode). That makes it dirt simple to know how your looped phrase will fit into the chord/riff/progression.
@johnnathancordy
3 жыл бұрын
Yep did mention it!
@jnh73
3 жыл бұрын
Aaaaaand now I just need to bite the bullet and upgrade from the HX Effects and a collection of preamps, to the Helix Floor.
@BobJones-bh9qz
3 жыл бұрын
I would say you won’t regret it
@cghoward2012
Жыл бұрын
Great video! Is this preset included in the bundle you offer?
@LawrenceDuffy477
2 жыл бұрын
3:10 thanks. Double press to stop the loop double press and hold cancel loop and then there's single long press do an undo all right thanks!!!
@PoppysGuitar
10 ай бұрын
How can I send the looper signal to a separate amp? I want to record a loop and send it to one amp and then set a more distorted compress guitar and send it to another amp. How do I do that?
@marcosnieto9727
Жыл бұрын
Hi John. Ok at the end of your session, can you save your loop? What happens is I turn off the Helix?
@steveandrushko75
4 ай бұрын
How long can the looper record? Can a full say 3 minute song be be recorded?
@MikeHenrick1
3 жыл бұрын
Cool
@marcosnieto9727
Жыл бұрын
Hi John, very nice video. I use my Helix Floor on top of my desk, not on the floor. Is it possible to use a external foot switch instead of the Helix switches? If yes can you tell me how to set it up. Thank you very much
@BourkeTommy
Жыл бұрын
You should be able to do what he was showing in command center using an external switch! 👍
@ChuckTheHamster
3 жыл бұрын
Great video! Can you use serveral 1-button looper blocks to have multiple loop channels like the boss rc-300?
@johnnathancordy
3 жыл бұрын
Nope - one looper per device!
@luckyno888
3 жыл бұрын
Have you tried the Singular Sound Aeros looper?
@diggidydamndave
2 жыл бұрын
I updated from the Boss GT-10 to the Helix LT recently; what was amazing about the GT-10 was that I could record a loop, and then cycle through all my presets/user patches while that loop was constantly on, so I could test out every single sound. Is that possible with the Helix, or is the looper restricted only to the preset/patch you put it on?
@Guitarrecovery
2 жыл бұрын
You can go to other patches as long as there is a looper on the patch you are going to
@diggidydamndave
2 жыл бұрын
@@Guitarrecovery But then I'd had to place a looper manually on ALL presets + user patches. I can do that, but it'd be pointless if I wanted to check a certain part of a song/riff out, as it would waste a lot of time. An external looper seems to be the only option at the moment.
@tomkemp1276
Жыл бұрын
Does the 6 switch looper work like this on the hx stomp xl?
@johnnathancordy
Жыл бұрын
Yessir
@clownshoo
3 жыл бұрын
I'm confused on my Pod Go looper. I realize I can't go back and forth between presets with different effects in one loop, but is there no memory at all when you change? When I record a loop on let's say patch A. If I power off the unit or go mess around on patch B for awhile, when I come back to patch A my loop no longer exists.
@johnnathancordy
3 жыл бұрын
It doesn't remember loops across power cycles or patch changes no - I believe if you create an adjacent patch that also has a looper, and switch to that patch, the loop MAY be preserved? But nothing that will survive a power cycle or changing presets to one without a loop.
@clownshoo
3 жыл бұрын
@@johnnathancordy Thank you for taking the time, beautiful playing as always! I guess these are only intended for performances or in the moment looping then. Now that I know, I will hook up my separate loop pedal in the effects loop to preserve across sessions.
@darrengill
3 жыл бұрын
Anyway of saving a loop and recalling it even if the unit had been turned off?
@johnnathancordy
3 жыл бұрын
No sir
@darrengill
3 жыл бұрын
@@johnnathancordy awww!
@777666777MICHAEL
2 жыл бұрын
0:06 as long as you don't want me to imagine other things while being behind me, I'm ok.
@victorvalmus8135
Жыл бұрын
how do you start a loop and then change to a preset and the loop continues? For example, you loop a clean sound then go to a lead preset? Thanks
Пікірлер: 60