The keys use MIDI channel 1 and the pads use channel 10. To use drum mode on the pads, change the tracks MIDI In to 10 in the Track Editor section of the Inspector. Any tracks you want controlled only with the keys, use MIDI In channel 1. It's pretty cool, because if you select a keys track and a pads track to record simultaneously, you can play the pads and keys at the same time.
@accentontheoff
11 ай бұрын
Newbie here, can you advise on how to map the drum pads to specific parts of a drum kit.
@rogcustom_2017
9 ай бұрын
@@accentontheoffx2
@robsmithiii29
2 ай бұрын
@@accentontheoffafter plugging in the Launchkey, open Logic and create a new drum kit track (Drum Machine Designer, Ultrabeat, or other plugin). Open MIDI Learn window. Assign Drum Pads by playing a pad on your Launchkey Mini to trigger a MIDI note. In the MIDI Learn window, click on the drum pad in the software instrument you want to assign. Hit the corresponding pad on your Launchkey Mini to map it. Test the Mapping by playing the pads to ensure they trigger the correct drum sounds.
@accentontheoff
2 ай бұрын
@@robsmithiii29 Nice thanks.
@emmaberry129
4 жыл бұрын
I was debating getting the Akai and I’m so happy I waited and did enough research to get to your video! So helpful thank you soooo much! 🙏🏼☺️
@apollossoundgarden667
4 жыл бұрын
Glad I could help!! I remember I couldn't find this information anywhere when I was researching, and when I finally got it it was right there, easy!
@emmaberry129
3 жыл бұрын
@@apollossoundgarden667 I just got mine- and the drum pad mode isn't working either- it allows me to play but it doesn't light up- and when I go to innovation components to program it and send it- it asks me which channel and I say channel 1- still doesn't light up. Did you ever figure this out or get a response from Novation?
@inverseK
3 жыл бұрын
Exactly what I needed to see to help me make up my mind between the two, as a total novice beatmaker with Logic at my disposal. Appreciate it!
@accentontheoff
2 жыл бұрын
Did you get it. Are you enjoying it.
@katsuOfficial
4 жыл бұрын
I got the MK3 today. Your video helped me a lot to work mine with logic. You’re great. Thanks!
@apollossoundgarden667
4 жыл бұрын
Glad I could help :)
@junholee7047
4 жыл бұрын
Did you get to assign knobs automatically? I just got mine, it wouldnt automatically assign/map controls.
@LongEarthTradingCompany
3 жыл бұрын
Damn, why do Novation not market this more for all the Logic users out there. I had the exact same thoughts as you describe before watching this.
@cisco9027
2 жыл бұрын
One of the better demo’s on this controller I’ve seen nice explanations.
@Robbieez
3 жыл бұрын
Hey I’m relatively new to music production and I was wondering if the built in arp syncs with the project tempo in logic ? I know it does in ableton but I’m not too sure for logic. Thanks ahead :)
@xSKiiLLER
3 жыл бұрын
Would like 2 know too
@TAVCE
3 жыл бұрын
Yes it does 👍🏽
@jeffagoddard
3 жыл бұрын
Great, timely video! I saw this when your first released it and it was the BEST fact based review. On this basis I bought the Novation LaunchKey 49 (refurbished was such a good deal). I’ve directed lots of musicians to this video.
@apollossoundgarden667
3 жыл бұрын
Thank you Jeff for sharing, glad it was useful!
@Juliano_DJOL
2 жыл бұрын
I have used just about all the 25 key midi controllers and I think the nektar impact lx25+ and 49 are very under rated. Especially anyone new to midi controllers, the presets it comes with map really well to logic. It's easy to use in the begining and the more time u have on it the more u learn. I've had the nektar 2+ years and still learning things on it! Novation and native instruments keys good too!
@grambience3139
4 жыл бұрын
My experience EXACTLY with the MPKmini ... that software that you have to use to program the different programs.. royally suuucck.. and you’re right, the pads are a little.. insensitive 😂 So yes.. thanks, so niiiice to have the walk through you provided! Just returned my mpkmini!
@apollossoundgarden667
4 жыл бұрын
Thanks for sharing! Glad the video was helpful to you :)
@woahsarah
2 жыл бұрын
for some reason sound isn't coming out of my launch key.. any idea how to fix that??
@theysamtheirs
3 жыл бұрын
Hi there! Does your launckey mini mk3 still work with Logic and the latest updates? I just got this the other day, and it seems to not really work. Many of the features you highlight here seem to be broken! Would love some thoughts on your recent experience since 10.5 or even now 10.6.
@wang2194
3 жыл бұрын
have you figured this out at all? i cant change tracks in the session mode in logic 10.6
@theysamtheirs
3 жыл бұрын
@@wang2194 nope! actually using the akai mpk mini mk3 mostly now with my ipad mini, but also playing around with a launchpad mini.
@wang2194
3 жыл бұрын
@@theysamtheirs after much investigation, I found that alot of the issues can be fixed by changing the mode under control preferences. 95% working now. 👍
@martinkulik9466
3 жыл бұрын
@@wang2194 yeah mine controllers aren't working either...novation should have updated it
@markus.leonardo
3 жыл бұрын
Would you know why the Launchkey Mini MK3 isn't showing up in Logic's control surface setup window? I've already reset control surface defaults and installed the script from Novation, but I can't get Logic to show anything other than "Launchkey Mini" from Focusrite, which doesn't do anything to with my MK3.
@accentontheoff
11 ай бұрын
Hi thanks for this. I am planning to get this device primarily for the mapping with the smart controls. So, wanted to just confirm that the mapping is stable and stays put. Could you advise. This will be my third MIDI keyboard (the other two don’t do it) so I am trying to be sure before buying. Thanks!
@bobzilla174
3 жыл бұрын
Thanks a lot for the video! I pressed shift Drum and the pads work now!
@TheSingateh
3 жыл бұрын
Any idea on my novation 49 all the navigations are working but is not given out any sound can you help on that pls.
@maxravedj
4 жыл бұрын
Drum mode sends midi notes on channel 10 so tweak your AU plugin to catch notes from channel 10 or all channels or change note channel with Scripter midi effect.
@deblish
3 жыл бұрын
So useful, thanks for taking the time buddy!
@b.9096
2 жыл бұрын
I am having trouble using my drum pads on the LaunchKey 49 with my Drum Machine Designer in Logic. How do I sync instruments I choose to my drum pads on my keyboard?
@BusterDarcy
3 жыл бұрын
Thanks for this, I’ve been considering the arturia minilab but it’s missing the chord and scale features of the novation that I would love to have as a novice player looking to focus on songwriting. My one concern about the novation is the nobs not being endless like the arturia and even the akai. What happens when your hardware nob is at one end and the software nob is at the other? I can see this becoming annoying and messing with the creative flow. How much of an issue is this for you?
@RichyMcFly
4 жыл бұрын
Great video, keep them coming! I am actually amazed by the fact it works good with logic too, unfortunately I have to wait another week before getting mine with Corona and all.
@apollossoundgarden667
4 жыл бұрын
Thank you for your support! There will be more videos coming up soon. I'm really happy to see that this video is being useful and watched by so many people. More than I expected, I'm really grateful. Enjoy your Launchkey!!
@RichyMcFly
4 жыл бұрын
@@apollossoundgarden667 Subscribed to your channel ;)
@hvhvgitaar
3 жыл бұрын
Novation are really missing a trick here. I initially stayed away from their keyboards because I am a Logic user and they really are perceived as an Ableton club member. So I got an M-Audio oxygen pro, which was claimed to work seamlessly with Logic. It doesn’t. To cut a long story short, I exchanged it for a Novation Launchkey mk3 25 (the mini’s big brother) and I am super pleased. Novation rocks. The mini is on my wishlist for mobile production 😉.
@fiaalfaro3839
4 жыл бұрын
Victor, I just wanted to leave helpful "criticism" -- I'm sensitive of hearing, mostly for noises people can't hear or aren't bothered by. I wanted to let you know that at certain points in your speech (I believe it's because of mic and not you) I can hear your tongue and your breathing very heavily. It made it hard for me to pay attention and learn (from this amazing tutorial, this is gold. Thank you). That's just my tea. I appreciate this regardless!
@apollossoundgarden667
4 жыл бұрын
Hi Fia.. Thanks a lot for the feedback, it's very helpful. I did have some problems with the mic in this video, since I had just got it at the time. Hopefully it will be better on future videos :)
@actualcris
2 жыл бұрын
The up and down arrows next to the Launchkey Mini option are not showing for some reason so I can't configure the input/output options.
@xtrct7303
4 жыл бұрын
I've switched from Ableton to Logic because of the MPE support. With 10.5 updates I can basically do everything i did in Ableton (still miss the Instrument rack tho). However, I notice one thing, it seems that the Launchkey's arp tempo isn't synced with Logic's BPM (in Ableton, the tempo knob does absolutely nothing), and IMO it's making it harder to make quantized arps. Do you know how to fix that??
@apollossoundgarden667
4 жыл бұрын
Good question, I don't use the arp function so much.. But I see how that can be a problem
@devanshkhetrapal
2 жыл бұрын
Hi, at 4:46, I'm unable to change the input and output ports. It shows my input port is invalid and output port is off. And I cannot change those. There isn't an option. Can you help?
@HUNTXR8
8 ай бұрын
Same for me, did you manage to fix this?
@yblanco
4 жыл бұрын
Cool video. Thanks. I got the Launchkey to use with Ableton but will give Logic Pro a try since is now free for 90 days. One question: at 10:29 when you are talking about how to map the pads to drums I can see the Drum kit part names next to the piano roll. Is this standard feature in Logic? Does it work for all Drums or is something you made yourself? Thanks again
@apollossoundgarden667
4 жыл бұрын
Hi Yon. Thanks for your comment, glad I could help. Yes, every drum kit in logic will show the kit parts like that in the piano roll. They keep a similar pattern through different drum kits (hi-hats, kicks, snares, are usually always in the same note for all drum kits). You can also use the Drum Machine Designer in Logic and assign the pads from Logic itself.
@yblanco
4 жыл бұрын
@@apollossoundgarden667 Thanks again. I can see it now that I installed Logic. I had problems setting up the Launchkey. I could not get what you show on the video. I was getting an orange exclamation sign on the Launchkey icon while trying to add it as a Control surface. I found this thread discussions.apple.com/thread/250866428 that helped me to get rid of the problem and install it. Then I could follow your steps nicely. Again thanks for this great video
@apollossoundgarden667
4 жыл бұрын
Thank you for sharing your problem and the solution! I'm sure it can be helpful for others too!
@yblanco
4 жыл бұрын
@@apollossoundgarden667 I have a question that you might have encountered: I'm having some trouble trying to map the midi knobs to Logic parameters using CONTROL SURFACES=>LEARN ASSIGNMENT. It is very buggy and crashes Logic quite often. I saw some videos from people using other midi controllers and seems to be easier. Even though I found a way to map the knobs for s single case use (since that will lock that knob to that only use) I'm looking for a more practical solution like the behavior in Ableton. Using Ableton, no matter which mode we are in: Session, Drum, Custom or Device, the knobs will map one to one to each of the devices/effects installed in the rack without doing any mapping which is quite handy. In Logic I noticed I can use the knobs for some amps (Gain,Bass,Mid,etc) but they don't do anything for example on an Echo effect. I can use the LEARN to train it for the Echo but then I lose it for the guitar Amp. Have you run into this issue? and would you please a solution to share? I will ask Novation as well. Thanks in advance !
@DjTomcat14
3 жыл бұрын
Just the video I was looking for!! I'm literally debating so hard between these two.... yup this is the one!.
@alistairhomewood7344
3 жыл бұрын
How have you found the launchkey?
@DjTomcat14
3 жыл бұрын
@@alistairhomewood7344 its a great little piece of hardware! I'm still not all too familiar with it. I've been accustomed to using just my MacBook keyboard so its been a bit of a learning curve but for the price I'm surprised at the functionality it has with logic
@alistairhomewood7344
3 жыл бұрын
@@DjTomcat14 yeh I think that's how I am too, cos I don't have a midi keyboard I recently just did a whole orchestra score for my chorus (over 20 instruments) with just my computer keyboard as a controller lol. Its a pain to add in velocity after. But yeh I think I'm set on this launchkey mini now, thankyou!
@HUNTXR8
8 ай бұрын
Does not work for me I downloaded the Novation Mino MK3 script but in the output and input port only Logic Pro Virtual Out comes up...
@MikeTsx123
2 жыл бұрын
Hey there, merry christmas and a happy new healthy year!! I have a huge problem he last month with my Akai MPK Mini mk3.I use Logic Pro X and when i connect it in the setup menu it shows up the device....everything ok BUT.....when input/output ports are in MPK Mini mk3 the keyboard doesnt work ,and some keys minimize/maximize the interface of DAW.Only the pads play sounds.What is going on please help me!!
@nowzen4240
3 жыл бұрын
hmmm I must've done something wrong. I only have few lights that light up when I press "shift" and I can't hear the keys, when I'm playing.
@brendanhoffmann8402
2 жыл бұрын
I looked into these for years. I'm a midi nube! I recently switched to Logic (From Reaper). I'm amazed. Having so much fun! I've had it about a month I think. I've been notating with mouse clicks and it's really cumbersome. Really looking forward to using it. I did a few muck around pieces and it was tremendously fun.
@matiasmoulin2126
2 жыл бұрын
I'm with Logic since 10 years and I have a love-hate relationship with it - especially when it comes to Midi it is a nightmare. I used to chase controllers that actually work with Logic - they all claim to do but lots do actually fail in my opinion - so be warned! However, a few years passed since my last disappointment with the Impact LX25+ so I'm amazed to see that the Novation actually comes with a Logic script. Might look into that as well.
@jackplaysviola6428
4 жыл бұрын
The novation launch key doesn't show up when you are setting up a new control surface. They only have Novation's launch pads. Do you know how to get around that.
@apollossoundgarden667
4 жыл бұрын
Hi Jack, did you download the Script Installer from the Novation website?
@maxisingleone
3 жыл бұрын
Can you control synths like U-he as easy as Logic synths and pluggins?? Or you have to map the controls in custom mode? Thanks!!
@meanwhileinespoo1265
3 жыл бұрын
did you find a stop function or do you need to use the typing keyboard or mouse? Thanks
@ConeyIsland1952
4 жыл бұрын
how do you transpose the key on novation launchkey mk3 25? I am trying with transpose lit,.. holding shift pushing +/- but it only changes the sounds not transpose what am I doing wrong?
@Mariogino
11 ай бұрын
does the novation installer do the software setup for you?
@agathauy2709
4 жыл бұрын
So drum mode totally doesn't work with the Launchkey Mini Mk3 right? :O That's a bummer. Or is it only in device mode? I wonder if the pads map to things that could be CC assigned? By any chance do you know if changing the midi channel of the device, like as in changing it from on device and not Components, also change the midi channel of the knobs? And pads if in Ableton? I've read that in Drum mode on the Mini MK2 they do change as well. And my LK 61 does change midi channel on the knobs on the fly.
@apollossoundgarden667
4 жыл бұрын
Hi, thanks for the suggestion, I will try that. For me it totally doesn't work (in Logic), but to be honest I got used to using the custom mode. I've created the drum set up I like, so it's working for me like that.
@agathauy2709
4 жыл бұрын
@@apollossoundgarden667 if you can try it out, the shift + transpose + pad # button midi channel selection method (just to be clear), please let me know (if that's ok with you), thanks! Been looking all over the net for this info to no avail 😂
@apollossoundgarden667
4 жыл бұрын
@@agathauy2709 Hi, I tried hitting shift+transpose+the Drum pad button.. but I'm not sure what happened. Do you know what exactly this command does? all pads turned red when I hold shift+transpose
@agathauy2709
4 жыл бұрын
@@apollossoundgarden667 it changes the midi channel of the device! The keyboard should be changed, what I'm not sure of are the knobs and on which modes they are changed. The midi channel from 1 to 16 depends on which pad you check :D You can verify this on stuff like Midi Monitor or anything that can see MIDI data
@agathauy2709
4 жыл бұрын
@@apollossoundgarden667 the midi channel change shows if used in Logic, but in Ableton, it doesn't really multiple midi channels on one track. I found different midi channels on one track in Logic useful for making the most out of knobs :D It's like 8 knobs x 16 channels per track!
@jay2theloo
3 жыл бұрын
Thanks for this! Very nice. But how did you get to the 'web based' interface?
@cheeseonbread4132
3 жыл бұрын
I can't get the knobs to work for some reason. is it something in my MIDI settings?
@alexpleva
4 жыл бұрын
I'm not seeing the control surfaces feature on my Logic Pro X menu. I see "Preferences" and "Key Command Presets" but no "Control Surfaces" in between. Any suggestions?
@hvhvgitaar
3 жыл бұрын
you need to enable advanced tools under Preferences>Advanced
@newnation3191
2 жыл бұрын
In my Input Port i dont have a Daw Port? can you help me?
@mithiyaz991
Жыл бұрын
I installed the device software from the website and my Logic pro X (10.5) is not showing Launchkey Mini mk3… Anyone else facing this issue? 😢
@josephdi-lenardo6637
Жыл бұрын
any way i can live loop with this in an earlier version than logic pro 10.5 im using logic pro 10.3.4 and i really want to find a way to live loop thanks for the video and subscribed
@kjbond4
2 жыл бұрын
I did this and my keyboard stopped working :,( anyone else?? Please help (never downloaded the logic driver but my keyboard has always been fine..i did it to use the record/stop buttons and now none of my keys or pads work in logic)
@FredGomesmusico
3 жыл бұрын
Im trying to understand what you did to make the pads work with the drums
@tottenhamfan01
3 жыл бұрын
Have you solved the problem with the pads?
@jonathoncooper1865
Жыл бұрын
I would be really grateful if you know how to change the lights, they are an horrible red and green at the moment
@yashkumarsingh747
4 жыл бұрын
I literally saw your video many times just to make sure I want to buy Novation Launkey mini Mk3, as I'm working on logic I was a bit unsure to buy it. the thing is its not in stock in my country so waiting for it to come and then I will buy it, so is it ok to buy Novation Asking you, Reply if possible.
@bloodcell6282
3 жыл бұрын
Go with the 37 key version,both are fine and have had updates across the board,plus novation does firmware updates
@AmazingNickFlair
3 жыл бұрын
Does anyone know a way to use the '>' and 'Stop Solo Mute' button to scroll through the sounds?
@harpham13
4 жыл бұрын
when I go into control surfaces all of them are in italic and cannot be chosen. did you have to do anything specific to get them usable?
@apollossoundgarden667
4 жыл бұрын
Hi, I just installed the plugin and it was available in the list. I'm not sure what is your problem, have you tried contacting Logic Support?
@pierrebibaultguitar
4 жыл бұрын
You have to go on the Novation website, create an account, insert your product + serial number. Then, you'll see a page like Apollo is showing at 3:33. You download the Logic plugin, install it. Only then you plug the Novation Launchkey and you restart Logic. You keep on following instructions given by Apollo, and you're done. I had the same problem than you, but now it works
@danielgustavogonzalezpatin6749
4 жыл бұрын
It does not allow me to use the Solo, Play, Record buttons. Do you know what the solution is? Do I use Logic Pro Version 10.4?
@awestonbackwards
4 жыл бұрын
I can help you get the session mode working, but it disables the drum pad like his is in the video. However, the lights on drum mode get disabled as soon as you load the Logic mapping from Novation anyway. So, I can also help you map your custom pads out to make up for it.
@minisoda1914
4 жыл бұрын
Just use ableton 😆 jk
@apollossoundgarden667
4 жыл бұрын
If those buttons are not working, it sounds like the pluggin wasn't installed successfully in Logic. Maybe try downloading it again from Novation.
@dalefernandez9751
4 жыл бұрын
How about in GarageBand is the launchkey mini did it work smoothly?? ,same like Logic Pro x????
@hvhvgitaar
3 жыл бұрын
Works ok for my Launchkey 25 mk3, so I suppose will be ok for mini as well
@riasure
4 жыл бұрын
Great video thanks for doing it. It has been a great help to me. One thing that I don’t seem to be able to do is control the master volume in Logic when multiple tracks are playing. Can you do this via the Launchkey mini? I can control the volume of individual tracks but not the master. Thanks
@apollossoundgarden667
4 жыл бұрын
Hi, Glad I could help. For me, if the 8th track is empty, the last knob on your Launchkey mini controls the master volume ;)
@riasure
4 жыл бұрын
Apollo's Sound Garden thanks for your reply. That’s good to know. I will bear that in mind. I discovered a few helpful tips as a result of watching your review. Keep posting videos!! Thanks once again.
@steve5662
3 жыл бұрын
cant see my mini on the list at all.. any ideas
@martinkulik9466
3 жыл бұрын
my volume knobs don't work....earlier I fiddle with trying to play 2 instruments with 2 different midi controllers so dont know could be that. actually now I read more people have this issue with latest logic
@etph1997
2 жыл бұрын
I'm actually having the same trouble with Drum mode, but it's related to the input and output ports in Logic. If you set the input and outputs to LKmini DAW Port, the pads in drum mode are not responding, and if you set the input and output to LKmini MIDI Port, the pads in drum mode respond but then session mode is completely blocked, same for shift+ARP option and the solo/mute button. Now, I know there's a custom mode (replacement for drum mode) but it is just frustrating as everything (session and drum mode) was working fine 2 days ago (when set to DAW port).
@kingkong6666
3 жыл бұрын
Could not agree more. I had a gen 1 (?) ~2010 akai mini the software/mapping was garbage then also. I actually was in conversation with Akai tech support and they basically said there was notihing they could do after an Apple OS update rendered the already bad akai s/w obsolete. And the pad response is terrible. I have no idea other than the luster of the MPC why the pads get such great reviews. I found your vid bc I'm looking at the novation for use w logic
@EliseoProductions
4 жыл бұрын
Do you still have a problem with the drum pads?
@apollossoundgarden667
4 жыл бұрын
I still cannot use the "Drum" mode. But I wouldn't say I have a problem. The custom modes work fine and the pads work great!
@awestonbackwards
4 жыл бұрын
@@apollossoundgarden667 It seems to be some issue with drum mode and session mode colliding. I figured out how to switch between the two working separately. So weird.. just let us program the entire controller ourselves!
@FredGomesmusico
3 жыл бұрын
There's something Im missing when tryin to make the pads work with the drums :(
@govoli1922
4 жыл бұрын
The new version Logic pro 10.5, this keyboard can not work well in session view, the solo and mut function not work well
@govoli1922
4 жыл бұрын
My issues : kzitem.info/news/bejne/sYiP1pmZmHWnmqQ
@apollossoundgarden667
4 жыл бұрын
That's really strange. For me it's still working with logic pro 10.5. Have you tried contacting Novation support?
@govoli1922
4 жыл бұрын
@@apollossoundgarden667 yes I have, but still no response
@alienijena1928
4 жыл бұрын
I'm having some issues as well with the new logic 10.5, I had the 10.3 and it was working fine. I updated it, and some of the functions won't work properly. Actually, the device was note installed anymore after the update, I had to reinstall it, now it's there, but the functions appear to not work fine. I'll keep trying to see what it is.
@govoli1922
4 жыл бұрын
@@alienijena1928 I have contacted Novation support, and they have replied that they will fix it
@MarcusV741
4 жыл бұрын
Great content, man!
@apollossoundgarden667
4 жыл бұрын
Appreciate it!
@soulsuccess
2 жыл бұрын
Thank you for this!! 🙏🏾
@DiegooAguileraa
2 жыл бұрын
Does anyone knows if this works on GarageBand as well?
@zainalmutaqin1022
3 жыл бұрын
is the mk2 mini version also compatible with logic pro x?
@marccampo8564
3 жыл бұрын
Hi does anybody can answer that question about mk2 ? Thanks 🙏
@di_beatz6083
4 жыл бұрын
Bro can we use that with Garageband? I mean with the pads as well..if do a video for that..
@apollossoundgarden667
4 жыл бұрын
Hi. The custom mode should work on garageband as well. I haven't tried it with the nobs, and other functions. Good idea, I'll give it a try, and maybe post a new video about it.
@dalefernandez9751
4 жыл бұрын
Apollo's Sound Garden yeah pls that will help us don’t have Logic Pro x
@LostBoysLofi
3 жыл бұрын
Great video thank you
@Mnevins
4 жыл бұрын
Thanks. Very helpful.
@gen_music
Жыл бұрын
How to use rewind in Logic super appreciate for help
@THBAFFE77
9 ай бұрын
Thanks for the info 😊😊😊
@stevesam5889
4 жыл бұрын
I dont see the edit option after installing and adding LaunchKey Mini. I dont see any screen where I can set the output port and the input port (4:41)
@apollossoundgarden667
4 жыл бұрын
Hi, sorry to hear about that. Have you tried reinstalling the Logic X pluggin from the Novation website?
@marlonmessam155
3 жыл бұрын
Yeah...that's the reason I was hesitant bout the launch key because all you hear is Ableton
@zobotrombie
4 жыл бұрын
Any reason you chose this over the arturia minilab mk2?
@apollossoundgarden667
4 жыл бұрын
Hi, I did not test the arturia minilab mk2. I have seen good reviews on other channels though.
@maxravedj
4 жыл бұрын
I have both. Minilab is a lot heavier and miss arp and chords features and I don't really like knobs behavior on minilab, its kinda "slow" and you have to rotate it like 500° or more to go from 0 to 127. I also didn't manage to get knobs work in Logic but maybe I just missed something. On the other side minilab feels a way more durable and solid, keys are better, etc.
@minisoda1914
4 жыл бұрын
ijsthee I think novation really tried to make this work with current daws obviously ableton but also with logic into consideration it's even supported in the manual
@bkuberek
3 жыл бұрын
The pads do work for some drum instruments. It depends on how they are mapped. But I'm glad to see how you mapped them using custom programs in novation software. Since there are so many drum kits and they are mapped to different notes I was wondering if we could remap the drum kits to the notes in the pad instead of mapping the pads to the drum kit notes.
@paulharry3540
3 жыл бұрын
i dont mean to be off topic but does anybody know a trick to log back into an Instagram account? I somehow lost the account password. I would appreciate any help you can give me.
@hamzaace7008
3 жыл бұрын
@Paul Harry instablaster ;)
@paulharry3540
3 жыл бұрын
@Hamza Ace I really appreciate your reply. I got to the site thru google and I'm waiting for the hacking stuff now. Seems to take a while so I will get back to you later with my results.
@paulharry3540
3 жыл бұрын
@Hamza Ace It worked and I actually got access to my account again. Im so happy:D Thank you so much, you really help me out!
@hamzaace7008
3 жыл бұрын
@Paul Harry you are welcome :)
@michaelgelfand1350
3 жыл бұрын
Mother Russia! thanks def getting the Novation now.
@mauwi5539
4 жыл бұрын
It works with launchkey 49 mk2?
@apollossoundgarden667
4 жыл бұрын
Not sure about the mk2 interface. But I remember seeing some video talking about the 49 mk3
@jackplaysviola6428
4 жыл бұрын
Doesn't it not work anymore because of the 10.5 update?
@jonasplarr7494
4 жыл бұрын
same here
@apollossoundgarden667
4 жыл бұрын
Still working for me. What is the issue you have?
@jackplaysviola6428
4 жыл бұрын
@@apollossoundgarden667 I think I forgot to install the script. Doesn't matter anymore because I am using Ableton now
@bigggjimmm
6 ай бұрын
Thanks a lot
@beat3lohim
3 жыл бұрын
Thank you sir
@VinceBaileydns-direct
4 жыл бұрын
That was great
@Juliano_DJOL
2 жыл бұрын
I recently got a akai mpk249 and after an hour of using it I realized damn I shld have gotten the komplete 49 or novation. The mpk249 doesn't even have a control editor, wtf I know right. Normally u wld think the bigger more expensive model wld have as much or more control and software but that's not the case at all. There is very little to no support for the 249 on amy of the mpc software. But after like 2 weeks I finally got it mapped like 80% like I want it, smh! Might be the last akai product I ever buy and I'm a long time akai user!
@Neverender6
3 жыл бұрын
If anyone figured out how to get drums working with the pads can you please let me know. The web based thing seems to work in the video but some people in the comments are saying it's not working for them and I'd prefer to be able to do it in Logic. Everything about the Launchkey Mini mk3 looks good to me but the ability to do finger drumming on the pads through Logic is kind of my main selling point. I'm also a total beginner so I'm reluctant to buy if it's really complicated or difficult to set up.
@BillGathen
3 жыл бұрын
On Logic Pro version 10.6.2, I had to go into Logic Pro -> Preferences -> Advanced Tools and enable "Show Advanced Tools" and “Control Surfaces” in order to get the left sidebar of the setup window to populate so I could configure the input/output ports. Apparently 10.6 defaults to "simple" mode and you have to opt-in to this stuff. Hope this helps someone!
@surfgasminfo9845
3 жыл бұрын
THANKS BILL!!!!!!!!!
@trptgk
4 жыл бұрын
This is helpful. Thanks. The only problem: I’m color blind.
@samiles1566
3 жыл бұрын
Dude same haha
@tottenhamfan01
3 жыл бұрын
F
@guitarguy4372
3 жыл бұрын
F
@cmm102694
4 жыл бұрын
You should do a arpeggiator tutorial
@melleverie
4 жыл бұрын
I have the same problem with the drum mode
@apollossoundgarden667
4 жыл бұрын
I still have the ticket opened with Novation. If they come back with a solution I will post it here as well.
@6joe16ful
4 жыл бұрын
Weird. I didn’t have to do all this, I just plugged my midi cords and it worked.
@kevinisermeyer5793
3 жыл бұрын
What Midi Controller do you use?
@loudane9962
4 жыл бұрын
I agree. Akai mapping on the MKII is fucking terrible! I hear the new MKIII is way better, but still lacks designated transport controls...
@apollossoundgarden667
4 жыл бұрын
I haven't tried the MK3, hopefully they fixed the interface issue. I saw the pads on the Akai mk3 are also quite different, they use the same pads as some of the well known Akai drum machines..
@COJordan
4 жыл бұрын
Is anyone else having issues installing to Logic 10.5?
@apollossoundgarden667
4 жыл бұрын
Hi Jordan. I had no issues after upgrading, but I had installed it before the update. What is the issue you are having?
@govoli1922
4 жыл бұрын
I have an issues to Logic 10.5, the session view, SOLO and MUTE does not work!
@awestonbackwards
4 жыл бұрын
@@govoli1922 I halfway figured this out, but it seems you either get to choose between Session Mode working or Drum Mode working. I had them both working and then it went back to just one at a time. However, do your lights work on drum mode? Mine do not.
@Right_in2
2 жыл бұрын
sample rate problem in this video
@minisoda1914
4 жыл бұрын
What the hells wrong with your mic😆
@apollossoundgarden667
4 жыл бұрын
great question ahah.. it's sorted now tho for future videos :)
Пікірлер: 182