Thanks marc! We are getting ready to eat eat eat oh yeah 🦃🍴🔪
@justinweaver8107
Жыл бұрын
Same to u an urs sir
@TheNutzandBoltz
Жыл бұрын
Cut a cord of wood for the mother'n'law every Thanksgiving day. Love saws, love serving others, and proud of channels like Buck'n Billy Ray. Thank you to all the saw running, saw making people out there.
@BuckinBillyRaySmith
Жыл бұрын
you bet
@juliomcdermott4696
Жыл бұрын
Had a realisation. These videos just keep getting better and better. And its because of the energy behind them. Deep down, its that energy we relate to, and thats what inspires all of us to a whole other level in our life. Thank you so much Buckin.
@TimStout71
Жыл бұрын
Happy Thanksgiving everyone ! I love watching Buckin playing around with his chainsaws. He's like a kid on Christmas morning. Puts a smile on my face every time.
@davidthomas5997
Жыл бұрын
Happy Thanksgiving Buckin and to this wonderful community. I am thankful to have found you all!
@i-love-comountains3850
Жыл бұрын
"Work hard, be honest, and be kind." Love your energy brother thank you for being here.
@ictdpowerstroke4591
Жыл бұрын
Hello Buckin great video Friend,,,have a lovely thanksgiving,,god bless
@shaner67
Жыл бұрын
I so remember when Ironhorse conceived, designed and built that rams horn for you and Hogans 266. Harvey was so secretive about showing it to his subs until it was sent out to Nanaimo. Great design and so innovative.. That man truly thinks outside of the box.. Gotta Love uncle Harvey..
@Swarm509
Жыл бұрын
Loving the MacMillan Bloedel jacket! My grandfather helped build and then worked his full career at the Nanaimo Harmac pulp mill. Got his 35 year Omega watch right next to me with the MacMillan Bloedel logo on the face.
@shapeshifter7753
Жыл бұрын
Thanks for all of you who take the time to put this info out to the public. It helped me with a free saw I found. It was missing the muffler. Most likely would’ve bought a stock one but because of all this great type content I was able to fab one outta scrap and I gotta say it sounds and preforms wonderfully👍
@jirusjirus9322
Жыл бұрын
Thank you... Time to give thanks... is most of the time. 💌
@diy7594
Жыл бұрын
Gotta love old IRON HORSE I watched all his vids learned alot. Love everything about power saws and tree cutting .THANK YOU GUYS FOR SHARING YOUR HARD EARNED KNOWLEDGE
@tinmanssaws
Жыл бұрын
I personally love loud and offensive hahahaha
@Piledriver2235
Жыл бұрын
Saw: "Braap BRAAAAAAAAAAAAP!!! *shuts of saw My Ears: "Eeeeeeeeeeeeeeeeeeeeee" My brain: "Welp, that didn't cure my tinnitus, but it didn't make it any worse either.... She good!"😁
@larrypalmer2415
Жыл бұрын
Getting ready for family and Thanksgiving here in Ohio! Everyone have a blessed day!
@terrywhite9017
Жыл бұрын
Love you Buckin Billy, there's something about your suped up power saws. Thinking back to those sounds of dirt track racing. Music to mine ears.
@sassy6292
Жыл бұрын
You should see the mess here in Nova Scotia after hurricane Fiona. You would be shocked at the damage to the forests. I’m working in increments to make things right on my own acreage but it will be decades before we aren’t looking at horizontal forests anymore. Trees piled on top of trees in great long swaths of of wind damage. My salt marsh shore line is all lifted up. That was my place of peace and now it’s inaccessible unless you go in with equipment. I cried real tears when I stood in a deep well of huge trees piled up all around…it was a hell of a trek in to that spot and dangerous but I was careful. It used to be a lovely forest to visit. During the lockdowns I went in there to get a handle on what’s real in the world and what actually matters.
@PaulSmith-ur3hn
Жыл бұрын
Buckin' Billy! You ol' rascal ypu😘 At a time in my life, you helping me tremendously. Both, with falling trees which is why I found you...BUT,,, I found so much more. You have all these "likes" for good reason my friend! All the best, Always. Paul Smith from NS
@andrewschrotenboer9445
Жыл бұрын
Hope you have a great Thanksgiving with your family!
@randybarnes6661
Жыл бұрын
Wished I lived close enough to hang out and work with you could learn some more about saws and falling trees like your videos buddy have a good one buddy. Mtn. Man later.
@edwarddavis507
Жыл бұрын
Happy Thanksgiving from the U.S. You rock Buckin’. Thank You for the short lesson. I can’t wait to see what Ironhorse has brewing for you!
@meradu2
5 ай бұрын
Lol you are correct my friend the fester I can zoom true any wood the better👍 and love the 2 stroke noise I grew up watching street racing two-stroke 50 to 500 cc And the smell and the sound just kind of stuck with me I’m working right now on making a muffler for my poulin wild think see if I can get it any wilder lol I have multiple saws and looks like just like you I love the vantage more than the new ones KZitem is constantly sending me this videos from you but I don’t mind them keep on going ,have a blessed day
@KLRFJR
Жыл бұрын
Great stuff lately, thank you! One request, if you please, an update on your forging journey...?
@allandriver2066
5 ай бұрын
Love the chanel but, I'd love you to come to Australia and see what cutting wood is all about.....no softwood....gotta work for every cut...👍
@ryanressis8179
Жыл бұрын
Happy Thanksgiving buck! Hope you have a full belly and a great cup of Joe 🪓 🌳 🪵 starting my holiday off with a good ol buckin special 🤘
@marko1025
Жыл бұрын
Great video friend . I’m making a ram horn muffler now you have inspired me . Thank you for all your efforts so we can learn from you . ✊🏻🇦🇺
@okami9811
Жыл бұрын
Man that's a nice pickup truck and work table tailgate . Stay elevated brother ✌️❤️🌲🪓🐝
@eaf27
Жыл бұрын
I love the pure joy of Mr. Smith. I strive to be as positive and joyous. 2 things, 1. Why when you power down a saw do you pull the string a bit? 2. would putting a baffle in the muffler chamber help with the back pressure?
@justinweaver8107
Жыл бұрын
Love that pipe brother happy ur here an a part of my life an inspiration. Appreciate u an all u do.
@ryankelly1846
Жыл бұрын
Dudes working with chainsaws in an argyle sweater lmao love it
@johnbroderick4594
Жыл бұрын
Happy Turkey Buckin!!!! Keep up the RPMs
@traynegrau8248
Жыл бұрын
Yes absolutely happy Thanksgiving to one all in the Buckin family !!And iron Horse seems to make great everything lol and now he's retiring damn the luck!!
@i-love-comountains3850
Жыл бұрын
You remind me of The Essential Craftsman. I think you two would get along famously.
@hogansmith7075
Жыл бұрын
they actually collaborated on a podcast u can find it if your search them both on youtube if your interested to see it
@tomnielsen6439
Жыл бұрын
One thing about the ram horns, It is a little longer tubes and could build up higher velocity to where it almost sucks the exhaust out.
@kevinholbrook7174
Жыл бұрын
Hey Billy, That ram horn muffler sounds awesome! Where can I get one for my Holziforma saw?
@bladimilsanchez7905
Жыл бұрын
Happy Thanksgiving Billy,,I going to get me a new chainsaw for Christmas,I still have much to learn, much love,
@joehackett9471
Жыл бұрын
Great video! I REALLY like that ram horn muffler! Keep up the great work! Happy turkey day!
@BuckinBillyRaySmith
Жыл бұрын
thx joe
@tazman-kennyfuller
Жыл бұрын
That ram horn is just awesome. Hope to see them on the website and hope to own one of those beauties. Bolt on performance. Love it. 🌲❤️🌲👊🪓
@stuegg7554
Жыл бұрын
You had me at: Loud and offensive😂😂👌 Love your videos man, keep on rocking
@stevenowell
19 күн бұрын
Hey Buckin, keep on truckin
@JandSChainsaw
Жыл бұрын
Gotta Give it to the old man on that saw it sounds awesome....
@flmulcahy
3 ай бұрын
I can see an old Pioneer lurking behind the door. Maybe a 620?
@tomshelnutt2256
Жыл бұрын
Are there any options for a stihl saw?? Specifically a 362cm
@WildWestGarage
Жыл бұрын
I’ve got the Iron Horse Ram horn
@BuckinBillyRaySmith
Жыл бұрын
oh yeah
@phredrocks
Ай бұрын
That is a great sounding saw
@gregjones3453
Жыл бұрын
Happy Thanksgiving Bucking!! Be sure to keep a tight and wet chain.
@GorgeyWoofy-jb3ip
Жыл бұрын
That's got a nice sound to it that muffler sounds like a dirt bike I wouldn't mine putting that muffler on my Stihl ms 500i chainsaw
@ioneldragan968
Жыл бұрын
Cel mai mare meșter ... Felicitări din România 😎!!!
@SteveRogers370
Жыл бұрын
Thanks!
@stephenjohnson61423
Жыл бұрын
Put copper flat washers on it it. Will tighten it self Co efficient diff in copper it expands with heat faster than aluminum or steel dyno_steviee said that cameron illinois love what your doing great outlook on everything keep it up
@fabzacres-blackcat
Жыл бұрын
I sent a pipe to Dyno Joe for testing purposes- it was built for a g372xp and he’s testing it on a 372xp x-tra torque. Will be cool to see what the Rowdy pipe does on his Dyno
@Fparrish
7 ай бұрын
Ram horn is sounding amazing Buckin 🤙🏼
@plowmaster1206
Жыл бұрын
The more i see these the more i wanna make one... happy Thanksgiving
@stevenmacfarlane2925
Жыл бұрын
I am new to your channel and thank you for passing on your extensive knowledge. I am also new to using a chainsaw, I have noticed when shutdown your power unit you pull the starter cord out a short distance. Could you please explain why and do you need to this to all saws.
@stevenmacfarlane2925
Жыл бұрын
Thanks mate
@stephanebouquiaux6507
Жыл бұрын
Hi, thanks for your nice spirit and your great lessons through your videos ! Can you sometime explain why are you pulling the cord while killing your saws ? I don’t get it 🙄
@snoozinglion8596
Жыл бұрын
Billy I know that there is such a thing as tuned headers for engines... you need someone to determine the proper length of a "header" for the saw... the idea is that the proper length will create a suction that draws mix into the cylinder... it could be curled like the ram horn... and maybe just a single pipe... just thoughts....
@brandywine1548
Жыл бұрын
All the pipes he’s got, and he talks about all the people that make them, but nobody sells them
@valqueenofValhalla
Жыл бұрын
Happy thanksgiving 🦃🍁🍽 y’all
@jacobcheney3987
Жыл бұрын
Happy Thanksgiving buckin billy
@lordmark4966
Жыл бұрын
happy thanksgiving to yall, years been tough but theres still a lot to be grateful for.
@BuckinBillyRaySmith
Жыл бұрын
Lord .. how are ya ?
@lordmark4966
Жыл бұрын
@@BuckinBillyRaySmith trudging along my man, depression is an everyday battle. im making more money, getting fitter, but theres something missing still and im trying to find it. i think i will but just gotta keep doin what i can and helping ppl i come across.
@gerardgutierrez2468
Жыл бұрын
How do I get a ram horn exhaust?
@BuckinBillyRaySmith
Жыл бұрын
not sure
@babalu1126
Жыл бұрын
That it, now I have to make one. I have the capability, and the tools. Happy Thanksgiving everyone.
@nuttynut54
Жыл бұрын
I could use that muffler for my souped up 266xp from the late 80"s Now it's a 72cc I believe or a 75cc But the guy how souped it up it an old logger from the 60's and that man knows his stuff
@btrnsfrmr
6 ай бұрын
if you dont use great care to tighten exhaust or you will likely burn up the coil. ask me how I found out...
@jason972
Жыл бұрын
I love you Billy Buckin Ray keep Rocking you youngbuck Jason Herrera from BanderaTX
@glendajune9140
Жыл бұрын
Happy Thanksgiving!!🦃🍽🦃🇺🇸🙋🏽♀️✝️🙏🏾🇺🇸
@kyleburnett5796
3 ай бұрын
Buck I just watched your video with the Buck horn muffler. Where can I get one ? 372xp.
@flyindlyin
Жыл бұрын
Wow love to see what it does on the dyno
@KeepingThingsOldschoo
Жыл бұрын
The Ram Horn is deadly!
@BuckinBillyRaySmith
Жыл бұрын
yeah Bobby
@jeremymoore2361
Жыл бұрын
Happy thanksgiving from michigan
@jeremymullen5378
Жыл бұрын
🔥right on bucking, that pipe sounds real snappy on that iron horse build.. really enjoy all the saw tech and tips🔥👊🔥⚙️🏍🔨🪵
@donnywalker4691
Жыл бұрын
thanks buddy great video i want a ram muffler
@Banjoandguns
Жыл бұрын
Just finished a muffler for my 390 today
@ufukbuyukkaya2733
Жыл бұрын
Don't forget to enable the Turkish language translation option for your videos. I will follow through subtitles🖐️
@cslimfu336
Жыл бұрын
Need a website for those brushworks and rams horn mufflers, please.
@phredrocks
Ай бұрын
Do the saws run cooler with these muffler changes, aside from power increase?
@fredkelly3446
Жыл бұрын
I like that ram horn muffler
@kevinparent8843
Жыл бұрын
this ram muffler is so nice , i want to make me one for my390xp NOW ! ahha
@jacobwalsh7319
Жыл бұрын
Happy Turkey Day! Love ya. How about a hug!
@mikemayfield4809
Жыл бұрын
Hey Buckin can you tell us how to get a ram horn or ufo muffler for the 372? Or any other custom mufflers for the 372? Thanks
@redscortgt93
Ай бұрын
Is the 86’er and Pavoratti the same saw?
@danielreed878
Жыл бұрын
Bucket I found a place of Origin thar I believe made McMullan saws generators not 110 percent sure but Lake Havadu Arazona at the Musuim has a bunch of these Peace
@steelcityperformancesaws
Жыл бұрын
talking about dumpster i haven't seen him on the channel in ages.
@aaron756
Жыл бұрын
Ah I love ya, buckin! Keep it up!
@BuckinBillyRaySmith
Жыл бұрын
thx cowboy
@DavidC1
Жыл бұрын
cool channel
@brianyeager9703
Жыл бұрын
Happy Thanksgiving to everyone. Love you BBR I've learned so much from you. God bless you and your family.
@djhotshot67
Жыл бұрын
instantaneous Crack 🤯😍 beautiful saw
@maxwellboles1864
8 ай бұрын
How do you get your saws to run so snappy? quick reving like that
@steveprincipato9025
Жыл бұрын
Happy Thanksgiving ❄️
@3116Cat
Жыл бұрын
I'd love yo be your neighbor it be like dueling banjos. But with power saws.
@stevejohnson747
Жыл бұрын
Love it!
@bobhalstead1879
Жыл бұрын
What is the pourpose of pulling on starter rope as motor dies.
@elirupp8913
7 ай бұрын
What would you say a 395 would be like with a ram horn exhaust on it?
@johnvelas70
Жыл бұрын
the 371 is the best saw made but there are Huskies and then there are toys
@ISEEORBS
Жыл бұрын
I love this guy.
@connormorrison2781
Жыл бұрын
Man im down in Florida, mostly have oak to split. Having a hard time finding a good axe thatll split the hard stuff! Can you help?!
@Sepac551975
Жыл бұрын
Happy Thanksgiving!!!
@HorvathSzabolcs88
Жыл бұрын
with how many mm cylinders can you reach 86 cc? 52 mm?
@theironhorse6600
Жыл бұрын
55mm
@bethanyhaskiell9116
Жыл бұрын
55 mm 390 cylinder unless you use a stroker crank then you can go with a smaller bore cylinder
@WilliamCrooks
Жыл бұрын
Happy Turkey day 😋
@kavemanthewoodbutcher
Жыл бұрын
Happy Thanksgiving Buckin!
@BuckinBillyRaySmith
Жыл бұрын
you too
@andrewgreiner8066
Жыл бұрын
How much would a custom muffler for a jonsered 603 with eliminator filter and hot carb run me or for a big old pioneer?
Пікірлер: 158