These video are fan-frickin-tastic. Thanks for sharing Joe
@dynojoemods2764
10 ай бұрын
Thank you! I am glad you enjoy!
@srcarr52
10 ай бұрын
A friend bought a MS250 that wouldn't run after the owner installed a new AM carb. The AM carb was missing the impulse hole and they scored the cylinder trying to get it to run.
@joshuawray5917
5 ай бұрын
old blue or blue, china blue, papa smurf, bluey like the kids cartoon, blue bandit, midnight slasher.
@troy3052
10 ай бұрын
Years ago in the 90s i got a free ski doo Olympic snowmobile that wouldnt run. The original carb (tillotson hr) had a impulse hole, the replacement did not not. So before internet, we drove to a snowmobile junk yard and spent all day finding the right carb. We still have that snowmobile
@ThisIsMyNewAlias
3 ай бұрын
I guess it runs?
@teammouse
10 ай бұрын
Could you please dyno a ms380/g388 one day, i think it will be interesting to see its so called low end powerband.
@headhunter7049
10 ай бұрын
I recently built a 61 white top and put the 52mm big bore with flat top piston. Didn't mess with port timing a whole lot just focused on air flow and lightened the piston and opened the windows to max and flowed out the transfers. Ran good but felt like there was more to gain. Sooo I put the horn and HS 228 and block from a 281xp on it and used the throttle plate rod from the 272 for linkage reasons then matched the intake port to the 281 block and simple muffler mod aaand it really brought out the power. I absolutely love it now
@B_Van_Glorious
10 ай бұрын
My. guy. I like the chimeras y'all are creating. If you ask me, the world needs more Frankensteins. To be clear, I mean the mad scientist. The world's got enough monsters for a while.
@dynojoemods2764
10 ай бұрын
That sounds like a very nice build!
@headhunter7049
10 ай бұрын
@@dynojoemods2764 be nice to see someone with a good channel build a saw like I did and run it on a Dyno. Challenge!!
@johnclarke8180
10 ай бұрын
Awesome episode, thanks for sharing!
@joehackett9471
10 ай бұрын
Although I am not a fan of chineseium saws, I like watching videos making them go fast!
@dynojoemods2764
10 ай бұрын
Main reason is for sawfest classes. Otherwise I wouldn't be playing with them either. They are a good way to get into this hobby though.
@96cr
8 ай бұрын
I have 3 for homeowners who did dirt bikes and hotrods like me they are awesome I can get a commercial saw for the clamshell husky 450 rancher
@goldentrucker7921
10 ай бұрын
Nice intro. 500i getting ready to be shipped over to you
@PurpleNovember
10 ай бұрын
Do you have the stock air filter setup? We put the oil foam air filter on our 500i and it made quite the noticeable difference in power. There’s a baffle for the stock air filter that gets removed when the oil foam air filter is installed. I’m curious what a difference that would make on a ported saw.
@dynojoemods2764
10 ай бұрын
They really like the free flowing foam filters
@dynojoemods2764
10 ай бұрын
Thank you! We will take care of it for you!
@PurpleNovember
10 ай бұрын
@@dynojoemods2764 We did the same thing to our MS 261 C-M and it was night and day difference, especially with the exhaust opened up! We went to foam filters because of fines getting past the stock filter and didn’t think it would help much with power.
@timbourque5095
10 ай бұрын
Nice 👍👍👍
@mattvarner1
10 ай бұрын
Fantastic video!! Your channel is improving greatly
@dynojoemods2764
10 ай бұрын
Thank you very much!
@Houseworksaws
10 ай бұрын
Been there.. when I did my 170 I forgot to drill the impulse on the carb I was using lol 😆
@dynojoemods2764
10 ай бұрын
Crazy how quick it happens....
@Macgyver-ranch
10 ай бұрын
We have all been there. You're lying if you never had the wrong gasket or flipped it. Great lesson video.
@diegovd7215
10 ай бұрын
Nice intro! No need to apologize, I am learning beside you. Thanks for sharing :)
@dynojoemods2764
10 ай бұрын
I appreciate that!
@BuckYaSaws
10 ай бұрын
It’s seems that most the aftermarket hd carbs come with the impulse hole. Good video!
@scottallpress3818
10 ай бұрын
For some reason the new intro reminded me of home improvement … I have no idea why but I like it
@DaveyBlue32
10 ай бұрын
Manny, Moe and Jack!!! Those pepped-up Boys!!!! LMFFAO! As a play on the PEP-BOYS cheapO parts that as a younger man kept several of my first beaters on the road!!! 😂😂😂!
@johnohara7590
7 ай бұрын
Joe,do you plan on installing a Lil red barn MS 361 pop up piston, since that mod wouldn't require machining either?
@markcdeyoung3118
10 ай бұрын
Winking blinking and nod
@chapsmaketory3960
10 ай бұрын
I did the carb swap w 46 carb n used the bottom impulse line n went thru hole in the filter base as it will attatch right on the cylinder
@ragercrepair9301
10 ай бұрын
I've done this before! Swapping carbs from one brand to another. Same carb and size just one was external fed with a hose and the other was port fed like yours. It's crazy that it can run but mine did too! Just idled wouldn't Rev at all. I think you'll see 6 to 6.5 horse. Probly. More of a torque gain than anything but we'll see! Good job and great video!
@kraftzion
Ай бұрын
The new carb doesn't have an accelerator pump either.
@tedneitzel
10 ай бұрын
Good stuff as always! Thanks Joe!!
@charlesjenks2710
10 ай бұрын
Larry, Moe and Curly. Moa in Chinese means which, wizard, beginning or to sprout.
@garengtutorial8923
10 ай бұрын
Keren boss..
@markcdeyoung3118
10 ай бұрын
The Three Amigos Steve Martin Martin Short and Chevy Chase 😅
@chriss8206
5 ай бұрын
Any tips on the least expensive location to pick up one of these saws. I need a large saw for ripping 71 cc or larger. I can't find any used around md
@dynojoemods2764
5 ай бұрын
Bluesaws.com is where mine have come from. Great customer service
@jonathanfierberg3807
10 ай бұрын
Call it Greta
@mikefriesdrums
10 ай бұрын
I’m guessing you will gain .31hp with that bigger carb💪🏻
@mitaraho
9 ай бұрын
Walbro HD 18b???
@mitaraho
9 ай бұрын
That's what I heard too, he did say it's from an MS 291
@timbourque5095
10 ай бұрын
The song from Jackal The Lumberjack Song would be cool in your intro but not sure about how "themtube" works.
@jackpinesavageadventures3142
10 ай бұрын
👍🏻👏
@dubbssawshop
10 ай бұрын
Hey a Ms170 with a 250 carb will do that too 😂😂
@dynojoemods2764
10 ай бұрын
My 170s wouldn't even fire like that, this goofy thing was about ready to go cut wood...
@jeremydawkins8399
10 ай бұрын
So they are about 1.5hp off the stock ms362?
@dynojoemods2764
10 ай бұрын
Most of the stock 362 come in around the 5.5-5.7hp range
@jeremydawkins8399
10 ай бұрын
@@dynojoemods2764 Dang that is pretty hot. I think stock rating is 4.5hp.
@96cr
8 ай бұрын
Stihl gas high standards so when it's worn they rate it @ 4.5 hp so technically you get what you pay for@@jeremydawkins8399
@Macgyver-ranch
10 ай бұрын
Stooges, seriously? How about Axl, Izzy and Slash or Paul, John and Ringo or even Ninja Turtle names? Come on you're killing me here.
@jarrodskeete52
6 ай бұрын
Hey Joe...are you going to get into the porting on these 361 series? Would love to see what they do! Awesome work as always
Пікірлер: 60