I have watched all of the great turners, but they do not explain what they are doing and WHY. as you do. You are the best for beginners and learners
@davebenedum9253
22 күн бұрын
Thank you for the time you took to explain the details. I enjoy your videos and learn something every time. Keep doing what you do!
@bretteee
25 күн бұрын
As always, a great tutorial I really enjoy listening and learning from your expertise.
@tombahnsen2806
20 сағат бұрын
Absolutely great teaching video. Thank you for all of your help
@waynenickoleff9041
6 ай бұрын
Thank you Tomislav! I started turning 2 ½ years ago when I retired, covid was in full swing I had no way to take lessons as everything was shut down. I watched many, many videos but none were as in-depth as they are in this video again, thank you, thank you for taking the time to make this one. I will for sure share this video it’s perfect for the beginner. Take care, Wayne
@tomislavtomasicwoodturning
6 ай бұрын
Thank you Wayne, ☺️
@michaeljameson1046
10 күн бұрын
Great video thanks
@MarklTucson
6 ай бұрын
Excellent summary of multiple elements for bowl turning. Great refresher for some of us who have been turning for a while but may be having issues in some areas. Thanks!
@tomislavtomasicwoodturning
6 ай бұрын
Thanks Mark😀
@DougMilleratWoodSpunRound
6 ай бұрын
Excellent. So many great tips, for both beginner and experienced turners. So many times it is the little things that make the difference. I so appreciate you taking the time to share.
@tomislavtomasicwoodturning
6 ай бұрын
Thank you Doug, thank you for watching
@GlennLucasWoodTurner
6 ай бұрын
Nice to see you using my red line technique which you would have seen in many of my videos. Kirk was my assistant each time I teach at craft supplies.
@tomislavtomasicwoodturning
6 ай бұрын
Sorry Glenn, didn't know it was your original idea, its a great tip to show student how to present gouge... I saw it in your videos and at Kirk but didn't connect the dots.... Sorry once again 👍
@GlennLucasWoodTurner
6 ай бұрын
No problem Tomislav. Keep up the great content.😊
@robertreihsen9096
6 ай бұрын
Just another great instructional, Thanks!
@alainnoel2198
6 ай бұрын
Dear Tomislav, Even for more experienced turners this is an excellent reminder of the mistakes we get to make by lack of attention to our movements. Great, great contribution to turning skills. Thanks
@tomislavtomasicwoodturning
6 ай бұрын
@@alainnoel2198 thank you Alain😀
@brgovender8879
Ай бұрын
Very interesting. A very informative video. Learning new skills each time I watch your videos. Thanks
@HarmonicGrunt
6 ай бұрын
Thank You Sir .
@claudepotter7763
23 күн бұрын
Great vidio I've learned alot from it I'm new to the lathe with making bowls
@northernhumidor5615
6 ай бұрын
As a left handed turner I always have to teach technique completely opposite to how i turn bowls and platters, as most are right handed, these instructions are quite insightful
@tomislavtomasicwoodturning
6 ай бұрын
Thank you
@RoySatzman
6 ай бұрын
Thank you so much this is very helpful
@andreachinaglia5804
3 ай бұрын
I think there is a big misunderstanding about push and pull cuts, it has nothing to do with the hand on the tool rest being in front of the gouge pulling it or behind it pushing it. What differentiates push and pull cut is the position of the bevel in relation to the cutting edge, if the bevel support is in front of the cutting edge relative to the direction you are traversing the gouge like at 24:19 in your video then it is a pull cut, the bevel support point "pulls" the cutting edge, if the edge is in front like at 24:11 is a push cut. Bot the cuts shown at 23:34 and 23:54 are pull cuts as the bevel is in front of the cutting edge, which hand is on the rest and the fact that the thumb is pushing or the other fingers squeezing and pulling is really important in relation of ergonomics, but does not affect the type of cut. Our personal preferences or particular situations like the tool rest restricting our movement freedom or choosing to turn both the inside and out of a bowl without reversing so are the headstock and chuck that restrict the movement can lead us to use completely different ways to achieve the same cutting edge presentation in relation to the wood and its bevel support. Some of us has trained to be ambidextrous at the lathe and can reverse the hands position, some others hate to do it and on and over, but it has to do only with the particular way that that particular turner uses to achieve a tool presentation in a particular situation, the definition of the cut type can not be dictated by it, but only by the presentation of the cutting edge in relation to the bevel and the wood, if that presentation is the same also the cut type is the same.
@stephenjenkins1102
6 ай бұрын
I have been watching turning videos for 3 months since I got my first lathe, and I have learned more from this than all the rest put together. What you say makes so much sense to me, subscribed, thank you.
@tomislavtomasicwoodturning
6 ай бұрын
Thank you very much sir, really appriciate your support 😀
@DennisLampret
6 ай бұрын
It is worth checking the cracks as the turning progresses as well. I had a nice chunk of wallnut hit my head the other day mid way through the shaping of the outside 😅 It looked not like a crack, more like a dark line going through the wood.. couldnt move it at all in the start, so i thought it is sound and continued work as usual… then at some point it “delaminated “. The chunk was about 15*10*5 cm crescent moon shape.
@tomislavtomasicwoodturning
6 ай бұрын
Indeed, it is worth, and should be mandatory, on this one I was 100% sure that is free of cracks 😉
@balahmay
6 ай бұрын
When I have looked back at my early bowls, I remember thinking “pretty good”. But then reality sets in and I see how wrong I was. I was able to re-cut and correct many because … yes, they were not that thin to begin with. Maybe I can get away with saying I had to rough cut them twice?
@jackthompson5092
6 ай бұрын
More great lessons Tomislav.
@brianhawes3115
6 ай бұрын
One thing I’ve noticed with your turning is how you stay in the cut, I find this very helpful for getting a really good finish. My first experience with the lathe I was turning way to slow, out of fear. Once a few bowls flew off and only minor injuries, i sped up and got great finish straight off the tool, so if your new to turning, speed up and stay in the cut😂
@tomislavtomasicwoodturning
6 ай бұрын
Well that is sometimes a solution as well😉 Thank you Bryan for watching and comment
@cobberpete1
6 ай бұрын
So much information and VERY well presented. Thanks again Tomislav
@randyrockwell6136
6 ай бұрын
Thank you Tomislov for yet another great teaching video. This video does more to explain bowl turning than any other I have seen. Your tips are extremely helpful and answer so me questions that I have as a novice turner!
@tomislavtomasicwoodturning
6 ай бұрын
Awsome to hear that,thank you very much 🤗
@jimphilpott902
6 ай бұрын
I once attended a demo where the turner talked about a "catenary curve" which comes from mathematics and illustrated the concept with a piece of ceiling fan pull chain. She created a steep curve by holding the ends of the chain closer and a nice bowl curve by moving the ends farther apart. Our bowls should have a catenary curve, In your footed bowl the catenary passes through the tenon. In the mortise bowl there is not a catenary curve on the outside of the form. Great video. You are teaching valuable lessons for beginners and a good reminders for those further along the path.
@DacaTimberworks.
6 ай бұрын
Nailed another great video Tomi! I absolutely love how you share your knowledge and dont hide it behind a pay wall like many others do. Words cant explain how much you're videos have helped my turning. Being self taught through youtube videos I consider you my primary influence and mentor.
@tomislavtomasicwoodturning
6 ай бұрын
Thank you buddy, really appriciate your kind words 🤗
@jimgeelan5949
6 ай бұрын
Tomislav yet another video full off very useful tips and techniques, the only thing do differently to how you teach things is I’m totally left handed. So on the outside of bowls its not so bad but i work standing on the other side of the lathe for the inside and i think that is even easier for left handers then right handers if that makes sense.
@andreachinaglia5804
3 ай бұрын
Are you turning the inside on reversed rotation, the piece turning clockwise? I suppose it as turning standing on the other side and keeping the usual rotation makes you turn with the gouge way far from the body and overhanging above the lathe bed, not good for precision, control and fatigue. If so be aware that the forces involved can unscrew the chuck or what you use to connect the worked piece to the lathe, it is not safe unless you have some device that prevents it. Anyway to be totally left of right handed is not a problem, a right handed person learning to play the guitar at the beginning has to learn to do with the left one veri difficoult things like fingering a chord or playing a scale while the right one has a simpler task, strumming (off course when he progresses it changes as touch is more important then the speed of the hand on the neck), the very same is true turning, at the baginning switching hands is difficult, to use the "wrong " hand is way more difficult, but as we develop muscle memory we can achieve the same finesse and control with both hands, for a left handed turner the learning curve is a little longer and steaper at the beginning, it is true, but he has a compensation as for him will be easier to change the hands, to become ambidextrous at the lathe, thing that can be very useful in spindle turning and sometimes also in bowl turning, the learning curve of a right handed one will be steeper when he wants to become able to reverse hands at will, and some right handed turners never climb that step.
@davidmorgan7522
6 ай бұрын
Lots of good tips in there Tomislav! For us old timers as well as the newbies! Thanks for sharing your experience, Take care, Dave
@tomislavtomasicwoodturning
6 ай бұрын
Thank you Very much Dave
@randymagee735
6 ай бұрын
Absolutely amazing tutorial! You are an incredible teacher. Thanks for your time and effort.
@tomislavtomasicwoodturning
6 ай бұрын
Glad i could help out ☺️, thank you for watching
@mssangra4030
6 ай бұрын
Thank you once again. This is amazing educational video. Every Woodturning tutor should adopt this video for training purposes. Excellent explanations and methodology. Thank you for sharing your knowledge. 🙏🏽
@tomislavtomasicwoodturning
5 ай бұрын
Thank you very much 🤗
@ianmoston3340
6 ай бұрын
Thanks again Tomislav, you make it look so ridiculously easy especially on very dry wood. You are a godsend to all who follow your videos.
@tomislavtomasicwoodturning
6 ай бұрын
Thank you sir very much 🤗
@johnnyb95678
6 ай бұрын
Tomislav, I always enjoy your videos. Thank you for all of the work you put into each one. I have learned a great deal from your videos. All of your hard work is greatly appreciated. Thank you!
@tomislavtomasicwoodturning
6 ай бұрын
Thank you Johnny for watching and support what I do 🤗
@valeriehenschel1590
6 ай бұрын
Excellent explanations that are easy to understand and practice!
@tomislavtomasicwoodturning
6 ай бұрын
Thank you very much 😀
@chrissimmoms1550
6 ай бұрын
I wish I'd seen this two years ago. In truth I've only really got my left hand away from the rest a couple of weeks ago, so much better. Great video, very well put together.
@tomislavtomasicwoodturning
6 ай бұрын
Thank you very much 🤗
@Allan-loveswoodturning
5 ай бұрын
What a great tutorial I’ve learned a lot from your tutorial. It just goes to prove you are never to old to learn new techniques. You have such a calming way of put your teaching technique across to all. Your viewers. Thanks Tomislav for all your teaching videos.
@tomislavtomasicwoodturning
5 ай бұрын
Thank you very much
@tomcoker9882
6 ай бұрын
Thanks Tomislav for a great video showing in detail some of the common mistakes turners make and how to do it correctly.i appreciate all the useful hints on proper technique, I sure a lot of others also appreciate the video. Cheers, Tom
@tomislavtomasicwoodturning
6 ай бұрын
Thank you Tom, very much 😀
@kenromines6393
6 ай бұрын
Thanks, your explanation/ reasoning for a lot off your cuts are much clearer than most demos.
@tomislavtomasicwoodturning
6 ай бұрын
Awsome to hear that feedback.... thank you
@danderson2930
6 ай бұрын
This was awesome. Thanks for describing how you use sound to tell us what is going on.
@stevenhansen8641
6 ай бұрын
🕶outstanding video Tomislav. Thank you for the time and effort.
@tomislavtomasicwoodturning
6 ай бұрын
Thank you, really means a lot ☺️
@jonathanmangold5024
6 ай бұрын
I wish you were closer. Would love to study with you.
@tomislavtomasicwoodturning
6 ай бұрын
Maybe one day I get to travel United States so we might meet☺️
@turningwiththewoods
6 ай бұрын
Wonderful teaching. I wish i lived near you and could take a few lessons.
@tomislavtomasicwoodturning
6 ай бұрын
I do plan maybe to organized something by the end of the year,so stay tuned for any news on that ☺️
@tomislavtomasicwoodturning
6 ай бұрын
Thank you very much
@turningwiththewoods
6 ай бұрын
Unless you are coming to New Hampshire, USA it will be a bit hard for a lesson :-) And in all seriousness I’ve learned a lot from just watching your videos. I’ve really become very comfortable with using a regular scraper for the bowl bottom.
@tomislavtomasicwoodturning
6 ай бұрын
@@turningwiththewoods who knows what future has in store😉 Really Im honored to be able to help so thank you very much for watching
@DustanBadovick
6 ай бұрын
Great vidio. You are an excellent teacher!
@gregdownunderinOz
6 ай бұрын
Thanks tommi, another thoughtful video. Thanks for taking the time to do these instructional videos for newbies. I use these to recommend to my trainees and to refine my turning and teaching.
@tomislavtomasicwoodturning
6 ай бұрын
Awsome Greg, thank you very much 😀
@tesuji2000
6 ай бұрын
A great video. Thanks so much. dave
@northernhumidor5615
6 ай бұрын
Excellent instruction as always.
@robohippy
6 ай бұрын
As for which holds better, a recess or a tenon, I like to say that as long as they are made correctly, they both hold equally well. The biggest problem with the recess that beginners have is that they leave too small of a shoulder and/or over tightening. Design wise, I don't end up with a continuous curve to the bottom of my bowls. Oh, I use recess exclusively. I make a transition, and then a flatter bottom. I do make a point to tell students to stand out of the line of fire. Just safer.... Biggest difference I have seen in turning styles is that a lot of it is determined by you turning on a short bed lathe, which I do, or a long bed lathe, which is the Stuart Batty method. I did take a 3 day class with Stuart and Allen, and it took me a couple of years to figure out why he didn't do anything the way I do. I wasn't comfortable with his arms extended methods. I hold my tools mostly level, or with my scrapers, angled down a bit. Not sure if you have ever tried to burnish a burr on your NRSs. A much sharper and longer lasting burr than the grinder burr. I will usually use the grinder burr first, then when dull, I burnish it down and then back up. I have a small carbide rod to turn the burr.
@jps3275
6 ай бұрын
Good to hear from you! You were one of my favorite turners on You Tube and I learned a lot from you.
@tomislavtomasicwoodturning
6 ай бұрын
Thank you sir , like you said ,most of stuff are personal preference like continious curve or flatter bottom,but that is beauty of turning. I do burnish the burr for scrapers,also I like to use first from the grinder,its a pitty to waste it and then burnish it....burr from burninsher is in my opinion much better but it can be a bit grabby for someone who don't have much expirience with scrapers, standard ones ...
@CaptJohn-op3bf
6 ай бұрын
Thank you Tomislov! Great video and instruction! You are an excellent instructor!
@tomislavtomasicwoodturning
6 ай бұрын
Thank you sir Very much
@mikeevans373
6 ай бұрын
What a fantastic video Tomislav. You explained everything so clearly and answered so many questions. Something for everyone and a great reference video for new and the more experienced turner. Thanks again. Regards, Mike
@tomislavtomasicwoodturning
6 ай бұрын
Thank you soo much Mike ☺️
@jamesstrathy2178
6 ай бұрын
I still get tool marks but following you has dropped them alot. Keep the videos coming.
@tomislavtomasicwoodturning
6 ай бұрын
Glad to hear that ☺️
@tonywatson5551
6 ай бұрын
Brilliant as always. Very clear explanations and guidance . I'm 2 years into turning and finally moved away from mortice except for platters and then refined with embellishments. I agree the vicmarc chuck with shark jaws can't be beaten. already looking forward to your next video . Thanks 👍
@tomislavtomasicwoodturning
6 ай бұрын
Thank you Tony, I use mortise on plates and platters as well, mostly beacuse I don't have big jaws so use what you have😉
@markduggan3451
6 ай бұрын
Lots of great information and advice. Thank you.
@PhilStevensphilongold
2 ай бұрын
Thank you so much Tomisval - really helpful for us newbies. I hope the move goes well and you get things sorted out quickly. Take care - Phil
@dennisseemann571
6 ай бұрын
Thanks you very much Tomislav, I always love watching your videos, their informative and understandable, you are making a lot of turners much better at their craft
@tomislavtomasicwoodturning
6 ай бұрын
Really appriciate that, I'm honored to be able to help out ☺️
@linkshousewestray
6 ай бұрын
Another excellent video. You really are such a good tutor.
@tomislavtomasicwoodturning
6 ай бұрын
Thank you 😀
@cooperken11
6 ай бұрын
This is your best video yet. So much great information and very well explained and filmed. Well done mate. This one is definitely getting shared with my class.
@tomislavtomasicwoodturning
6 ай бұрын
Awsome,glad to hear that 😀 Thank you very much
@alexcraig8543
6 ай бұрын
This was an awesome video! So much valuable information! Thanks, Tomislav!
@tomislavtomasicwoodturning
6 ай бұрын
Thank You for watching 😀
@pauldickinson8987
6 ай бұрын
Thank you for all the useful information I learned alot
@dbull46
6 ай бұрын
Awesome. Great guy. Tom, keep them coming
@kaybee2300
6 ай бұрын
Another excellent teaching video
@tomislavtomasicwoodturning
6 ай бұрын
Thank you 😀
@William_Kenny
6 ай бұрын
Tom another great video for all skill levels, thanks for sharing, kind regards from will 👍
@tomislavtomasicwoodturning
6 ай бұрын
Thanks a lot Will😀
@richardwhisler5593
6 ай бұрын
Nicely done! When I started doing bowls, these chucks were not available. I had to use tenons with jam chucks. Lots of flying bowl blanks while learning to turn interior of bowls. I kept the rim parallel in case I had to reverse jam to remove scars from exterior of bowl due to crash landings. Usually interior was missing too much wood to return to screw chuck or faceplate when it went airborne. Then curve could be corrected when returning to interior curve. Ah, the good old days haha!
@tomislavtomasicwoodturning
6 ай бұрын
I would say that it all brings some wealth of knowledge and expirience.... can't beat that 🤗
@timofeyzhukov-khovanskiy9173
6 ай бұрын
I only have about 2-2.5" jaws on my chuck and I kind of like the mortise when I turn larger shallow bowls with wider foot. That way I can hide the mortise in the foot and still have a pretty thin bowl.
@danielbuck
4 ай бұрын
Great video, this is really helpful to have all of these tips and techniques in one video!
@tomislavtomasicwoodturning
4 ай бұрын
Thank you 😀
@kenvasko2285
6 ай бұрын
Nice job on the organization of this video. Appreciate you giving credit to others. Great information. By far your best video for instruction. I will share this with others in my woodturning club. Thanks!
@tomislavtomasicwoodturning
6 ай бұрын
Thank you sir, really appriciate sharing and support what I do 🤗
@ДенисГлебов-ж3ь
6 ай бұрын
Very good lessons..If you use termowood on glue, please have tenon,not mortise.Its safety.Thank you Tomislav.
@ronaldwitbooi2831
6 ай бұрын
Terrific teaching video Tom, !!!
@tomislavtomasicwoodturning
6 ай бұрын
Thank you sir
@Fatschwab
6 ай бұрын
Great tutorial. I learn so much from your videos. Thanks for sharing the tip about using the redline.
@tomislavtomasicwoodturning
6 ай бұрын
Its awsome tip I have seen on Glenn Lucas and Kirk Dehear videos
@iggy227
6 ай бұрын
Obično kad vidim video od čuku vremena ne pogledam, ovo je jedan od rijetkih koje sam pogledal od početka do kraja sa guštom. I mogu samo reći svaka čast. Ovde fakakat ima materijala za početnika i za nekokoga ko se već dulje vrijeme bavi tokarijom. Uvijek je lijepo vidjet i drugačiji pristup nekim stvarima, nekad i taj drugačiji pristup bude i bolji od tvojega osobnog pristupa, pošto eto svi smo drugačiji, pitanje je samo nekad koliko smo zaprovo tvdoglavi u svojem načinu i promijeniti nekaj na bolje. Svaka čast Tomislav i nastavi samo tak.
@tomislavtomasicwoodturning
6 ай бұрын
Hvala puno 😉
@KerryCorney
6 ай бұрын
Great video mate. A lot of beginners will benefit a lot form this info👌🤝
@tomislavtomasicwoodturning
6 ай бұрын
Thank you my friend👍
@dvavra
6 ай бұрын
Great video with lots of tips as others have noted. I wouldn't mind seeing your take on design, decoration and (subtle) details that many turners fail to see.
@tomislavtomasicwoodturning
6 ай бұрын
I'll do something on that topic as well. Thank you very much for watching
@908woodturner
6 ай бұрын
Great video, learned so much
@fredmunson8603
6 ай бұрын
Thank you for your learning video, very good.
@wrecks2007
6 ай бұрын
Good info. Thanks for sharing.
@jameyfark8877
6 ай бұрын
Thank you. Very insightful.
@racheldray1057
6 ай бұрын
Brilliant lesson
@tomislavtomasicwoodturning
6 ай бұрын
Thank you Rachel
@tonysmith3143
6 ай бұрын
Awesome video Tomislav, thanks for sharing.
@calvinderuiter2033
6 ай бұрын
Amazing, truly great video I think I just found my new favourite channel cheers🎉
@tomislavtomasicwoodturning
6 ай бұрын
Awsome,thank You very much 😀
@DavidBird-uu8km
6 ай бұрын
Very nice. Great information. I look forward to next video on the mortise and tenons.
@tomislavtomasicwoodturning
6 ай бұрын
Should be soon, Still waiting on something to arrive😀
@glennconstable3789
6 ай бұрын
Great video - thanks
@lewisdye1002
6 ай бұрын
Very helpful, angles are usually not obvious, but more subtle in affects, needing attention. I would be very interested in some tutorial on shaping and proportion, when and where to steer to or away from the wood.
@tomislavtomasicwoodturning
6 ай бұрын
Thank you very much for suggestion, I'll see what I can do 😉
@lawrencecuculic7737
6 ай бұрын
Wonderful video, I started turning about 6 months ago and have only done small projects like pens. I have been a little intimidated at trying a bowl but after this video I am ready to try. Can someone please tell me what tool rest he is using. Thanks again and I just subscribed
@tomislavtomasicwoodturning
6 ай бұрын
Thank you for watching and glad I help you out to start on bowls. I use standard tool rest for this lathe, its 170mm long, and I have 300mm long, its similar you get on powermatic lathes or jet but mine has 30mm tool post instead of 25mm
@lawrencecuculic7737
6 ай бұрын
Thank you, I look forward to watching more of your videos
@matthewwright57
6 ай бұрын
It would be awesome for this sort of videos to add chapters.
@tomislavtomasicwoodturning
6 ай бұрын
Yes, I know, I need to get to a comp but just don't have the time😉
@DancingFox6
Ай бұрын
I have finally overcome most tear out issues using gouges, but I still have the problem sometimes when I use scrapers, especially on the inside wall of bowls. Tell me please what is the turner doing wrong to get tear out? (I’ll be glad when your finishers are available 😊)
@tomislavtomasicwoodturning
Ай бұрын
Sometimes turners don't do anything wrong, sometimes its just wood. Look out for that negative 90 degrees and really light touch, you want to get airbour dust as with the sandpaper. You'll get shavings as well but getting a lot of dust can tell you that you have good burr and tehnique. Tiny bit of dust and no shavings means usually that its dull. Sorry for late response, hopefully this helps.... I'll do a video on this specific topic
@DancingFox6
Ай бұрын
@@tomislavtomasicwoodturning a video would be great!
@lesdawson3847
6 ай бұрын
I was once told to sharpen the gouge for the last two cuts, make a great cut and then, because all hell can break out, don't make the last cut.
@tomislavtomasicwoodturning
6 ай бұрын
That works as well 😅 usually often last pass is one pass too many 👍
@dennissells
2 ай бұрын
Problem, l live in Thailand, dry season temp can reach 40c with 10%humidity What would be the best way to dry timber difficult to turn bowl green Value your comments and videos Thanks Dennis sells
@tomislavtomasicwoodturning
2 ай бұрын
Hello sir,you need to slow down drying process,so try Carpenter glue or white woodworking glue and thin it down 10% with water and cover in 2 coats the bowls.... For boards and other stuff I would coat entire endgrain and again trying to find place in house or shop that has bigger moisture but low temp..... Even wall thickness helps a lot. Hope it helps and let me know if I helped
@krperry2007
6 ай бұрын
Tomislav, about what angle is this gouge bevel? (Roughing outside. ) And on the inside the angle looks about 45 or less? Thanks great tips. Especially about cutting through the vibration.
@tomislavtomasicwoodturning
6 ай бұрын
Thank you very much,glad I could help out. I always use around 45 deegres bevel, for inside and outside.... Sometimes its between 40 and 45
@josephcapasso70
6 ай бұрын
wouldn't it be prudent to color the inside of the groove with a magic marker so that the viewer could easily see which way the gauge is facing? Very hard to ascertain the position of the bevel
@tomislavtomasicwoodturning
5 ай бұрын
Not sure what you mean as I did that, I painted the bottom of the flute.
@josephcapasso70
5 ай бұрын
@@tomislavtomasicwoodturning If you colored the inside of the flute - with a magic marker- than the flute's position would be more conspicuous. It is hard to determine exactly in which position the flute is. Looking at the video, with the shiny surface of the skew, and chips flying , it is hard to determine where the flute is in relation to the cut. To a new turner this is important, and is not second nature as you might think. Thank You for getting back
@tomislavtomasicwoodturning
5 ай бұрын
@@josephcapasso70 no problem, I'll see what I can do to clarify that without painting flutes of my gouges😅
@mutmunkel
4 ай бұрын
I do not get it, why 17k views and only 1k likes?
@sarmadbadii4043
6 ай бұрын
Thanks for the great instructive videos. A little too much talking though.
@tomislavtomasicwoodturning
6 ай бұрын
Well some stuff I just can't overlooked so it it talking video to try help out folks... Thank you very much for watching
@LewisKauffman
6 ай бұрын
Thanks!
@jrk1666
6 ай бұрын
diameter in inches x rotation in rpm should be around 6000-9000
Пікірлер: 157